Np Dispensers
Post on 14-Jan-2016
221 Views
Preview:
DESCRIPTION
Transcript
Technology Solution to detect and avoid Short Delivery Features to Ensure Correct Quantity:
K Factors History Record Logging Counter History Record Electronic Totaliser Value at the time of Calibration.
Steps for Calibration using Electronic Correction:
The Portion housing the Electronic components and Calibration switch is sealed by W&M Deptt.
W&M Deptt. Seal
Calibration Procedure :
1) Without Removing W&M Seal- Calibration mechanism is not accessible:
2) Remove Housing Containing CPU (Central Processing Unit ) PCB (Printed Circuit Board):
3) CPU PCB and Calibration switch accessible only after removing Housing / Plug
Calibration Switch (Normal Conditions Off)
CPU PCB
4) Change Calibration Switch to On Position:
Calibration Switch Changed to On Position
5) Enter Programming Mode through Password
Programming mode Parameter 1
6) Enter in Calibration Mode:
Calibration Mode Parameter
7) Nozzles Delivery Check using Standard Measuring Can
Zero Display
8) Lift the Nozzle for Dispensing in Measuring Can
9) Stop Dispensing after Filling Measuring Can
Actual Quantity Dispensed =10 Liter Dispenser displaying More Short Delivery
Replace Nozzle Back
10) Feed in Actual Dispensed Quantity(10.000) using Keypad
10.000 Enter by Keypad
Keypad
Generation of K Factor
Range of Calibration is +/- 100 ml for 5 Liters. Beyond this range Calibration is not Possible- Electronics will
give Error Condition
K Factor Generated Automatically Stored in Memory
11) After Successful Calibration Electronic Housing Sealed by W&M Deptt.
Audit Trail Mechanism for W&M Deptt ( At any time); Data Stored in Dispenser is Non Tamperable
Logging Counter Three Digit Non Editable internal counter, This Counter increases its value after each successful Calibration attempts
Logging Counter Specifying Total Calibration attempts on respective Nozzle
Record History 1
Electronic Totaliser Value- At the time of Calibration
K Factor (Last)
Record History 2
Electronic Totaliser Value- At the time of Calibration
K Factor (Second Last)
Record History 3
Electronic Totaliser Value- At the time of Calibration
K Factor (Third Last)
top related