NIPPON STEEL & SUMITOMO METAL HF-ERW Steel & Sumitomo Metal Corporation with respect to the use of the information contained herein. The information in this publication is subject
Post on 22-Apr-2018
217 Views
Preview:
Transcript
Pipe Products
2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 JapanTel: +81-3-6867-4111
HF-ERW
© 2012 NIPPON STEEL & SUMITOMO METAL CORPORATIONP102en_01_201210f
http://www.nssmc.com/
HF-ERWNIPPON STEEL & SUMITOMO METAL
Notice: While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the reader’s risk and no warranty is implied or expressed by Nippon Steel & Sumitomo Metal Corporation with respect to the use of the information contained herein. The information in this publication is subject to change or modification without notice. Please contact the Nippon Steel & Sumitomo Metal Corporation office for the latest information.Please refrain from unauthorized reproduction or copying of the contents of this publication.The names of our products and services shown in this publication are trademarks or registered trademarks of Nippon Steel & Sumitomo Metal Corporation , affiliated companies, or third parties granting rights to Nippon Steel & Sumitomo Metal Corporation or affiliated companies. Other product or service names shown may be trademarks or registered trademarks of their respective owners.
NSSMC production system begins with advanced metallurgy and clean BOF steelmaking practices. After continuous casting, at hot-rolling process, hot-rolled strip of optimum quality for pipe making is produced.
1 Superior Material
High uniform wall thickness and smooth finish free from nonmetallic inclusions and surface defects provide Linepipe with a superior level of quality and excellent dimensional accuracy as well as high performance properties.
2 High Dimensional Accuracy
1 High strength linepipe2 High toughness linepipe3 Anti–Sour linepipe4 OCTG pipe
3 Variety of Products
The unique welding condition control and monitoring system ensures quality of the weld along its entire length.
4 High Reliability of Weld
From steelmaking to pipe manufacture, quality is strictly controlled through every production step to ensure pipe products. Testing and inspection include body lamination UST, highly sensitive UST for weld seam, hydrostatic testing and numerous mechanical tests.
5 Excellent Quality
Characteristics
1
Blast Furnace
BasicOxygenFurnace
DegassingContinuous Casting
PWPHF-Welder
Forming
Facing FlatteningTest
SlabHot Strip Mill Uncoiling, Leveling, Shearing Edge
MillingCoil Edge
UST
Outside and InsideWeld Bead Removing
Seam Heat Treatment Sizing CuttingPipe BodyUST
Hydrostatic Test Seam UST Final Inspection Products
Products
Drift Testand
Inspection
Threading and Beveling Coupling Power Tightening
Marking
24-inch Mill Manufacturing Process
2 3
PWPHF-Welder
Outside and InsideWeld Bead Removing
Forming
FlatteningTest
Hydrostatic Test
Inspection
Sizing
Coupling Screw-onand Power Tightening
CuttingSeamHeat Treatment
Cooling Straightening
WeighingLength Measuring
Marking UV Coating
Threading
HydrostaticTest andDrift Test
StraightnessInspection
Pipe End UST andWall Thickness Inspection
Outside Diameter andRoundness Inspection
EMT Seam USTPipe Body UST
Products
Products
Blast Furnace
BasicOxygenFurnace
Degassing
Continuous Casting
Hot Strip Mill UncoilingLeveling
Slitting EdgeMilling
Shearing andWelding
Looper X-RayGauge
Facing
Coil EdgeUST
16-inch Mill Manufacturing Process
4 5
Principal Processes HF–ERW Weld Heat Input Control
Steelmaking PWP HF–WelderDegassing and desulphurizing during steelmaking process supply clean steel with low non-metallic inclusions.
Hot Rolling Welded Seam Heat TreatmentAdvanced hot rolling supplies hot coils with fine grain structure and high dimensional accuracy.
Seam heat treatment homogenizes microstructure and physical properties at welded zone as same as those of base metal. Exact seam position is indicated by fluorescent marker for weld seam tracking.
Perfect Welding Process, developed by NSSMC, produces high-quality weld.A welded seam is inspected by ultrasonic tester.
Varying combinations of welding heat input, welding speed, pipe wall thickness, etc. produce different weld results.
Low Heat Input
Optimum Heat Input
High Heat Input
Classification of Welding Phenomena Fluctuation Patterns of Oscillation
1 Welding Phenomena
Welding conditions are monitored and controlled within the optimum range by using our unique weld heat input system to minimize oxides included in the weld seam.
2 Weld Heat Input Control
6 7
Reliable NDT System Size Range of ERW Pipe
After coil edge preparation, both edges of the coil are inspected for laminar imperfection with coil edge UST.(If required)
Full body is inspected by a rotary UST unit along full length of welded pipe. (If required)
Each pipe is inspected for weld seam imperfection with advanced automated UST for entire wall thickness.
1 Coil Edge UST
2 Full Body UST 3 Weld Seam UST
Probe Arrangement
Skelp
ABWater Nozzle
Probe Arrangement
A
C
BDB C D A B
2
0
0.1
4 6 8 10 12 14 16 18 20 22 24(in)
114.3 168.3 219.1 273.1 323.9 355.6 406.4 457.2 508 558.8 609.6(mm)
Outside diameter
Wal
l thi
ckne
ss
4
6
8
10
12
14
16
18
20
22(mm)
0.8
(in)
0.7
0.6
0.5
0.4
0.3
0.2
Oita Works(Hikari )
Nagoya Works
1 12 23
n
3n
Probe Arrangement (example)
Weld Seam
Seam UST
NSSMC’s ERW pipe mills produce pipe with outside diameters from 4-1/2 inches (114.3 mm) to 24 inches (609.6 mm). The equipment to produce such pipes reflects NSSMC’s intent to meet the great demand for larger and heavier steel pipe.
Wall ThicknessTo produce pipe with wall thickness up to 0.866 inches (22 mm) NSSMC has installed large scale forming & welding equipment.
LengthNSSMC’s ERW mills can produce pipes with length up to 60 feet (18.3 m). These long pipes reduce the number of weld joints and inspections necessary at the site, thus leading to faster construction and lower costs.
8 9
KashimaHasaki
Nagoya
Amagasaki
FuttsuKimitsu
Wakayama
Tokyo
Head office
Hikari
UO Pipe MillERW Pipe MillSeamless Pipe MillResearch Center
FACILITIES AND LOCATIONS MEMO
10 11
MEMO
12
top related