MS AND DS PABX SYSTEMS

Post on 14-Apr-2017

306 Views

Category:

Documents

2 Downloads

Preview:

Click to see full reader

Transcript

KAREL ELECTRONICS CORPORATION

PABX SYSTEMS SOLUTIONS

MS Series PABX Systems

MS26S MS38S MS48C MS48-ISDN MS128

MS26SThe Cost Effective and Complete Solution for

SOHOs

2-line/6-extension capacity Can be used with any DP/DTMF telephone or

KAREL LT26S(-H) feature phones Standard doorphone and door-opener interface Easy programming by telephone and remote

programming Built-in fax router Polarity reversal and metering pulse detection All conventional features like call forwarding,

speed dial, reminder service, etc. Optional battery backup interface Call record listing and processing through NET-CM

MS38SBig Communication Capabilites for Small-Sized

Companies

4-line/8-extension capacity Can be used with any DP/DTMF telephone or

KAREL feature phones Standard doorphone and door-opener interface Easy programming by PC or telephone and

remote programming Built-in fax router Polarity reversal and metering pulse detection More than 100 programmable features including

Least Cost Routing (LCR) Rich set of accessories including different feature

phones. Budget Facility with MAN3000 Call Management

System

Click on the image to see the accessories of MS38S

MS48CFlexibility for Growing Enterprises

Click on the image to see the accessories of MS48C

4-line/12-extension basic capacity Expandable to many different configurations with

combinations of 2/6, 4/12, 0/16 expansion boards reaching to a max. capacity of 48 ports

All features of MS38S plus: Flexible numbering plan Built-in battery backup unit DECT base station support RS232 serial printer interface Optional DSS (Direct Station Select) modules

with feature phones Budget Facility with MAN3000 Call

Management System

MS128Modular, Larger yet Affordable

Click on the image to see the accessories of MS128

No basic capacity. Completely modular with 8 slots up to 128 ports capacity: 4-20 lines, 12-124 extensions

Expansion with 4-line/12-extension and 16-extension modules

All features of MS48S

Budget Facility with MAN3000 Call Management System

MS Series Standards Internal Melody Generator External Music Connector Door Opener (through relay control) External Announcement System Caller ID to Extension with Caller-ID Card Any kind of DP/DTMF Telephone Set

including Fulya and Ladin Wall Mountable

DS Series PABX Systems

DS200M

DS200S

DS200

DS200MUltimate Communication System

Click on the image to see the accessories of DS200M

Digital Single rack, 9 slots, 144 ports Networking Capabilities with digital (ISDN BRI,

PRI, E1-R2) or analog (TWT, E&M) lines VoIP Communication Alternate routing QSIG support Extension Modules:

Analog (16 extensions), ISDN BRI (8S0), Digital (8U, 16U), Local Battery (8LB)

Trunk Modules: ISDN PRI, E&M, Analog (8 lines)

DS200SUltimate Communication System

Click on the image to see the accessories of DS200S

Digital Single rack, 14 slots, 224 ports Networking Capabilities with digital (ISDN BRI,

PRI, E1-R2) or analog (TWT, E&M) lines VoIP Communication Alternate routing QSIG support Extension Modules:

Analog (16 extensions), ISDN BRI (8S0), Digital (8U, 16U), Local Battery (8LB)

Trunk Modules: ISDN PRI, E&M, Analog (8 lines)

DS200Ultimate Communication System

Click on the image to see the accessories of DS200

Digital Capacity up to 2500 ports Networking Capabilities with digital (ISDN BRI, PRI, E1-

R2) or analog (TWT, E&M) lines VoIP Communication Alternate routing QSIG support Extension Modules:

Analog (16 extensions), ISDN BRI (8S0), Digital (8U, 16U), Local Battery (8LB)

Trunk Modules: ISDN PRI, E&M, Analog (8 lines)

DS200 Series PABX Features Rich set of features including Least Cost Routing,

Hotel Features, Flexible Numbering and Remote Programming

Suitable for networking applications and compatible with existing networks

Compatible with standard telephones, special feature telephones and ISDN compatible devices

Advanced call charging options via Polarity Reversal Detection, Metering Pulse Detection and Tariff Tables

Call Record processing

Easy to use system administration interface

DS200 PABX Additonal Features

DS200 PABX system differs from DS200M and DS200S in the sense that:• Distributed CPU:

o Distributed processing structure is adapted, instead of a single processor to control all the functionality.

• Redundant CPU:o High grade of reliability is assured by the on-line

redundant processor which is ready to back up the main processor and the power network

• Power Network:o Designed to provide redundancy support to ensure

persistent operation in case of a failure in the system cause by external factors.

DS200 Series PABX Standards External music connector Door Opener (2 for DS200, 1 for

DS200S&M) External Announcement System Budget Facility using MAN3000 Call

Management System Any kind of DP/DTMF Telephone Set

including Fulya and Ladin)

DS200 Series PABX Networking Any number of DS200 series can be

connected together forming a single, uniform telephone system network

This is possible, thanks to the incorporated QSIG support

Uniform or non-uniform numbering plans are supported

Widely used PABX facilities such as calling line identification, alternate routing, routing authorisations, routing restrictions, least cost routing, call forwarding and call transfers are supported within the entire network

DS200 Series VoIP Applications

With the VoIP module, Karel DS200 Series offer efficient yet cost-effective solution to link enterprises with distant offices and branches.

The VoIP module supports protocols of H323 standards and G711, G729 voice compression algorithms.

DS Series are fully compatible and can interact wth other brand devices supporting the same.

top related