Model Keypad 105 KEYTROLLE R KeypadVehicle Monitoring Device Monitoring Device.
Post on 15-Dec-2015
279 Views
Preview:
Transcript
Model Keypad 105 Model Keypad 105
KEYTROLLKEYTROLLERER
KeypadKeypadVehicle Vehicle
Monitoring Monitoring DeviceDevice
KEYTROLLERKEYTROLLER available in 2 model seriesavailable in 2 model series
Keypad Model 105Keypad Model 105 Code inputCode input RFID card inputRFID card inputThis presentation covers this This presentation covers this
modelmodel
LCD Model 500 seriesLCD Model 500 series Full featured start from Full featured start from
keypad Model 501 –keypad Model 501 –impacts/speeding etcimpacts/speeding etc
Keyless ignition Model 502Keyless ignition Model 502
KEYTROLLKEYTROLLERER
Vehicle Monitoring Vehicle Monitoring SystemsSystems
Can be installed on ANY make/model electric, gas, LPG or Diesel powered vehicle
ADVANTAGES + ADVANTAGES + DISADVANTAGES DISADVANTAGES KEYPAD vs LCDKEYPAD vs LCD
Advantages of keypad 105 model (vs LCD)Advantages of keypad 105 model (vs LCD)
Inexpensive, but very effective system Inexpensive, but very effective system
Multiple configurations---box keypad, flush keypad, double Multiple configurations---box keypad, flush keypad, double keypad modelskeypad models
Low profile flush mounting availableLow profile flush mounting available
Dual keypads for multiple controls (like truck cranes—see Dual keypads for multiple controls (like truck cranes—see schematics)schematics)
Designed for very tough, very abusive applications (like Designed for very tough, very abusive applications (like freezers, foundries, etc)freezers, foundries, etc)
Disadvantages of keypad 105 model (vs LCD)Disadvantages of keypad 105 model (vs LCD)
No LCD screen for many operator and supervisor interfaces No LCD screen for many operator and supervisor interfaces (like checklists, recent events, wireless text messages, etc)(like checklists, recent events, wireless text messages, etc)
Automates checklist with only PASS or FAIL for entire Automates checklist with only PASS or FAIL for entire checklist not checklist not
individual items. Entire list recorded as one event---not individual items. Entire list recorded as one event---not individual checklist logged itemsindividual checklist logged items
Less memory of 2,040 events vs up to 10,000Less memory of 2,040 events vs up to 10,000
Keypad Model 105 Keypad Model 105 OptionsOptions
KEY105B Box mounted keypadKEY105B Box mounted keypad
KEY105F Flush mounted keypadKEY105F Flush mounted keypad
SM in the model denotes external shock memory module SM in the model denotes external shock memory module KEY105B-SMKEY105B-SM
IM in the model denotes internal memory mounted in box IM in the model denotes internal memory mounted in box (no impact sensing) addition KEY105B-IM(no impact sensing) addition KEY105B-IM
S in the model denotes standard RFID card reader option S in the model denotes standard RFID card reader option KEYS105B KEYS105B
H is for HID-Prox card reader option KEYH105BH is for HID-Prox card reader option KEYH105B
EXAMPLE: KEYS105B-SM-MVEXAMPLE: KEYS105B-SM-MV denotes keypad 105 denotes keypad 105 model in box mounting with standard RFID reader and model in box mounting with standard RFID reader and shock module option with a MV (24-36V) convertershock module option with a MV (24-36V) converter
Voltage regulatorsVoltage regulators Standard voltage -12VDC vehicles no converter neededStandard voltage -12VDC vehicles no converter needed
Electric vehicles require in line converter optionElectric vehicles require in line converter option 24—36VDC vehicles add MV converter option24—36VDC vehicles add MV converter option 48VDC vehicles add HV converter option48VDC vehicles add HV converter option
Design Schematics Design Schematics Model 105Model 105
RFIDRFID card reader options card reader options
HID-Prox card readerHID-Prox card reader
HID i-Class card HID i-Class card readerreader
Std 125KHzStd 125KHz
* It is recommended you * It is recommended you send an RFID card to send an RFID card to Keytroller to evaluate to Keytroller to evaluate to insure it works properly insure it works properly with the model you choosewith the model you choose
**RFID card reading is NOT **RFID card reading is NOT available with flush available with flush mounting optionmounting option
PRE-SHIFT CHECKLISTPRE-SHIFT CHECKLIST Shift start time and # of shifts programmed Shift start time and # of shifts programmed
into KEYTROLLERinto KEYTROLLER ““WARNING” LED flashes at first start of WARNING” LED flashes at first start of
vehicle for that shiftvehicle for that shift Time to complete checklist is programmed in’Time to complete checklist is programmed in’ If PASS or FAIL not passed within that time, If PASS or FAIL not passed within that time,
vehicle will shut downvehicle will shut down Allows operator to restart and start checklist Allows operator to restart and start checklist
process all over againprocess all over again
Uses laminated checklist attached to vehicleUses laminated checklist attached to vehicle
Operator completes checklist with “grease” Operator completes checklist with “grease” pencilpencil
If ALL items pass successfully, PASS key is If ALL items pass successfully, PASS key is pressedpressed
If ANY item fails, FAIL key is pressed---vehicle If ANY item fails, FAIL key is pressed---vehicle shuts downshuts down
Common operator can NOT restart vehicle if Common operator can NOT restart vehicle if FAIL is pressedFAIL is pressed
Supervisor, Mechanic or Programmer code can Supervisor, Mechanic or Programmer code can clearclear
Failed event written up by supervisor/mechanic Failed event written up by supervisor/mechanic and either sent for repairs or cleared for useand either sent for repairs or cleared for use
Abandoned vehicles?Abandoned vehicles? Ever wonder took a truck from your Ever wonder took a truck from your
department and never brought it department and never brought it back?back?
Who left the truck in the back lot last Who left the truck in the back lot last night on third shift?night on third shift?
Who got the flat tire and left the truck Who got the flat tire and left the truck in the yard without calling the in the yard without calling the mechanic? mechanic?
Who knocked off the dock door and Who knocked off the dock door and left the forklift sitting there?left the forklift sitting there?
NO MORE!NO MORE!
Those days are gone when you installThose days are gone when you installKEYTROLLER KEYTROLLER vehicle monitoring system!vehicle monitoring system!
MECHANIC’S LOCK MECHANIC’S LOCK OUTOUT Regardless if the Mechanic knows how Regardless if the Mechanic knows how
to repair the problem or not he can lock to repair the problem or not he can lock out the equipment until help arrives. out the equipment until help arrives. Night shift mechanics can lock out a Night shift mechanics can lock out a damaged piece of equipment until the damaged piece of equipment until the next day, so no one uses it and gets next day, so no one uses it and gets hurt. hurt.
Once the Mechanic code has been Once the Mechanic code has been entered the lamp on the keypad labeled entered the lamp on the keypad labeled “IGN” will flash indicating he “IGN” will flash indicating he successfully disabled the vehicle. successfully disabled the vehicle.
The Mechanic can re-enter his code to The Mechanic can re-enter his code to deactivate the lock out deactivate the lock out
Another supervisor, mechanic or the Another supervisor, mechanic or the programmer can over ride the Lock programmer can over ride the Lock out.out.
We recommend a “Do not operate” tag We recommend a “Do not operate” tag
with lockout.with lockout.
Create true Red Flag lockout to prevent Create true Red Flag lockout to prevent equipment usage by common operator equipment usage by common operator codescodes
4 types of codes:4 types of codes:
• 973973 Drivers codes On-Off Drivers codes On-Off onlyonly
Code expiration---alerts Code expiration---alerts management when recurrent management when recurrent training is due for that training is due for that operatoroperator
• 1010 Mechanic codes – On & Mechanic codes – On & Off + Mechanic lockoutOff + Mechanic lockout
• 1010 Supervisor codes – On & Supervisor codes – On & Off, over ride Mechanic lock Off, over ride Mechanic lock out and clear alarmout and clear alarm
• 11 Programmer code – Full Programmer code – Full Access and programming Access and programming codes IN/OUT from the codes IN/OUT from the keypadkeypad
KEYTROLLERKEYTROLLER 105 105
COMPONENTSCOMPONENTS KEYPAD--KEYPAD--Code or RFID Card OptionCode or RFID Card Option
FLASHING ALARM/SIREN—FLASHING ALARM/SIREN—Wires Wires into relay (optional)into relay (optional)
SHOCK/MEMORY/SPEED SHOCK/MEMORY/SPEED MODULEMODULE—Plugs into keypad---stores —Plugs into keypad---stores impact sensors, real time clock and memory. impact sensors, real time clock and memory. 3 cables---33 cables---3rdrd cable connects to speed and cable connects to speed and engine monitoring sensorsengine monitoring sensors
RELAY UNIT---RELAY UNIT---Plugs into keypad and is Plugs into keypad and is wired into ignition switchwired into ignition switch 2 wires—electric2 wires—electric 3wires---internal 3wires---internal
combustioncombustion Special software version Special software version
for Fortis/Veracitor designfor Fortis/Veracitor design CYBERKEY--- CYBERKEY--- Memory key data transfer Memory key data transfer
(optional) (optional)
CYBERWIRE— CYBERWIRE— 2.4ghz or 802.11 2.4ghz or 802.11 wireless radios (optional) wireless radios (optional)
Enable with--code or Enable with--code or RFID cardRFID card
Key Switch Eliminated—Key Switch Eliminated—start directly from keypad!start directly from keypad!
Private code used for access or Private code used for access or optional RFID cardoptional RFID card
Programmer can add new Programmer can add new employee codes from keypad employee codes from keypad
Mounted on dash or bracketMounted on dash or bracket
Can preset allowed time to exit Can preset allowed time to exit and re-enter lift without using and re-enter lift without using code again. Just hit code again. Just hit STARTSTART when when re-entering vehicle before time re-entering vehicle before time outout
Time out can be actuated by seat Time out can be actuated by seat
switch or by pressing switch or by pressing STOP STOP which which will shut down enginewill shut down engine
Indestructibe Metal Piezo Indestructibe Metal Piezo KeypadKeypad
Sealed to tough outdoor Sealed to tough outdoor and abusive applicationsand abusive applications
No moving parts---No moving parts---electronic switcheselectronic switches
Vandel proof, weather Vandel proof, weather proof, tamper proofproof, tamper proof
Optional on Optional on KEYTROLLER keypad KEYTROLLER keypad 105 units105 units
Standard on outdoor Standard on outdoor START-SMART simple START-SMART simple ignition unit. ignition unit.
Adjustable mounting bracket Adjustable mounting bracket optionsoptions
Double “ball” sockets Double “ball” sockets allow for mounting allow for mounting to various flat and to various flat and slanted surfacesslanted surfaces
2 options:2 options: Top: 4” shaft—round Top: 4” shaft—round
mounting platesmounting plates Bottom: Option for Bottom: Option for
mounting to upright mounting to upright of drivers overhead of drivers overhead guardguard
ALARM/SIREN--ALARM/SIREN--SETTINGSSETTINGS
Excessive SpeedExcessive Speed – Set safe speed, light on dash – Set safe speed, light on dash flashes and beeps during a grace period settable flashes and beeps during a grace period settable in seconds when driver exceeds allowed speed, if in seconds when driver exceeds allowed speed, if he doesn’t slow down, alarm sounds and remains he doesn’t slow down, alarm sounds and remains on until speed is slowed down. Event is recorded on until speed is slowed down. Event is recorded and operator/time/date vehicle stamped.and operator/time/date vehicle stamped.
Preventative MaintenancePreventative Maintenance – When programmed – When programmed hours or date arrives for PM the key pad hours or date arrives for PM the key pad warning light flickers for a pre-determined warning light flickers for a pre-determined amount of days and/or hours. When grace amount of days and/or hours. When grace period expires, vehicle will NOT start unless period expires, vehicle will NOT start unless super/mechanic code. super/mechanic code.
Drive train failuresDrive train failures – Sending unit for low oil – Sending unit for low oil pressure and high engine temp triggers the pressure and high engine temp triggers the Keytroller, alarm sounds and shuts down lift. Keytroller, alarm sounds and shuts down lift.
Upon Abusive ImpactUpon Abusive Impact ---the alarm will sound ---the alarm will sound and, if programmed, will shut down the lift – you and, if programmed, will shut down the lift – you can set time of shut down after impact. Most use can set time of shut down after impact. Most use 20+ seconds, to allow the driver to back off 20+ seconds, to allow the driver to back off product or problem then it shuts down. The product or problem then it shuts down. The forklift will not be far from impact zone---damage forklift will not be far from impact zone---damage can be reviewed by operator and supervisor. can be reviewed by operator and supervisor. Device can only be re-enabled by Programmer, Device can only be re-enabled by Programmer, Supervisor or Mechanic code---event recorded. Supervisor or Mechanic code---event recorded.
* Adjustable mounting bracket shown here. * Adjustable mounting bracket shown here.
WARNING FLASHING WARNING FLASHING SIRENSIREN 120dB flashing strobe siren when all three wires 120dB flashing strobe siren when all three wires
connectedconnected
Can be wired to be silent with only the flashing Can be wired to be silent with only the flashing strobe working strobe working
Or wired for only 120dB sirenOr wired for only 120dB siren
Alarm stays on after impact requiring supervisor to Alarm stays on after impact requiring supervisor to deactivate deactivate
If alarm is triggered and seat belt is unlatched, the If alarm is triggered and seat belt is unlatched, the alarm will stop, but start again when you latch the alarm will stop, but start again when you latch the seat belt. (If you use electric seat belts to activate seat belt. (If you use electric seat belts to activate Keytroller)Keytroller)
Strobe flashes during 1st 5 seconds of speeding, Strobe flashes during 1st 5 seconds of speeding, then activates alarm and shuts unit down, if operator then activates alarm and shuts unit down, if operator continues to speed. continues to speed.
Set the hours or date of next Preventive Set the hours or date of next Preventive maintenance due, strobe will flicker indicating maintenance due, strobe will flicker indicating service is due as planned. A grace period date is also service is due as planned. A grace period date is also set and the vehicle will not start after that date or set and the vehicle will not start after that date or hours. Example: service due at 250 hours, strobe hours. Example: service due at 250 hours, strobe flickers during grace period of 50 hours and or 3 flickers during grace period of 50 hours and or 3 days, at 300 hours and or 72 hours, you can not days, at 300 hours and or 72 hours, you can not start it. start it.
Supervisor or Mechanic can over ride the PM Supervisor or Mechanic can over ride the PM shutdown, but, if a operators puts his code in after shutdown, but, if a operators puts his code in after the supervisor and the software date and hours the supervisor and the software date and hours haven’t been adjusted and a PM is not completed, it haven’t been adjusted and a PM is not completed, it will not start for the operator. The Keytroller will be will not start for the operator. The Keytroller will be assisting in the PM schedule is excessive gaps in assisting in the PM schedule is excessive gaps in hours and months between oil changes.hours and months between oil changes.
SHOCK/MEMORY SHOCK/MEMORY MODULE--105MODULE--105 Mounted near rear of vehicle on Mounted near rear of vehicle on
frameframe
Side (X) or Front/Rear (Y) Side (X) or Front/Rear (Y) Impacts---settable in .1g Impacts---settable in .1g incrementsincrements
““Ignore” impacts under—for more Ignore” impacts under—for more forgiving setting and reduction of forgiving setting and reduction of false alarmsfalse alarms
Log Shows Intensity and Direction Log Shows Intensity and Direction of Impact, Speed at Impactof Impact, Speed at Impact
33RDRD cable connection for Optional cable connection for Optional Speed and Engine MonitoringSpeed and Engine Monitoring
Code Expiration Operator Safety Code Expiration Operator Safety Refresher Training Refresher Training
Real Time ClockReal Time Clock
Logged Data Storage 2040 event Logged Data Storage 2040 event storagestorage
RS232 serial port for connection to: RS232 serial port for connection to: PC/laptop, Cyberkey data transfer PC/laptop, Cyberkey data transfer key or Cyberwire wireless radiokey or Cyberwire wireless radio Click the picture to watch
video
Two types of speed sensing--Two types of speed sensing--optional optional
Magnetic sensors Magnetic sensors mounted in wheel well mounted in wheel well and “erasure” magnet and “erasure” magnet mounted in wheel hub.mounted in wheel hub.
Gear tooth sensor Gear tooth sensor mounted in crown gear of mounted in crown gear of axle.axle. Provides better Provides better
resolution required for resolution required for auto speed control auto speed control optionoption
Speeding optionsSpeeding options Basic:Basic:
““Grace” period set by programmer (4-5 Grace” period set by programmer (4-5 seconds)seconds)
Operator begins to speed – beeps + warns Operator begins to speed – beeps + warns himhim
If operator speeds through “grace” periodIf operator speeds through “grace” period—alarm sounds and event is recorded —alarm sounds and event is recorded making operator accountable making operator accountable
Automatic:Automatic: NO “Grace” period setNO “Grace” period set When operators begins to speed When operators begins to speed
aautomaticallyutomatically actuates electric actuator actuates electric actuator that restricts accelerator cable or rod that restricts accelerator cable or rod stroke to restrict engine RPMs and stroke to restrict engine RPMs and therefore top speed automaticallytherefore top speed automatically
Neither option restricts engine RPMs at Neither option restricts engine RPMs at low speed---so operator can maintain low speed---so operator can maintain high engine RPM necessary for high engine RPM necessary for hydraulic speed and performancehydraulic speed and performance
*Fits to any gas, LPG, diesel, engine*Fits to any gas, LPG, diesel, engine
Seat Belt Seat Belt Auxiliary input can be connected to a seat belt with an Auxiliary input can be connected to a seat belt with an
internal switch (available as option from Keytroller)internal switch (available as option from Keytroller)
Insures that operator engages seat belt clip or Keytroller Insures that operator engages seat belt clip or Keytroller device will shut down vehicledevice will shut down vehicle
Engine monitoringEngine monitoring Connections for engine Connections for engine
“idiot” lights on dash for low “idiot” lights on dash for low oil pressure and high engine oil pressure and high engine temp. temp.
Programmable ignition shut Programmable ignition shut down after “idiot” light stays down after “idiot” light stays lit for programmable time---lit for programmable time---requires supervisor or requires supervisor or mechanic’s code to restart.mechanic’s code to restart.
Protects engine from Protects engine from catastrophic failurecatastrophic failure
CYBERKEYCYBERKEYQuick Data Transfer Quick Data Transfer
SystemSystem Handheld Device—no need for computer Handheld Device—no need for computer connectionconnection
Includes: Red Box, Blue Box and 1028k Includes: Red Box, Blue Box and 1028k keykey
Downloads Logged Data to Memory ChipDownloads Logged Data to Memory Chip
Upload Clone file to change embedded Upload Clone file to change embedded codes and settingscodes and settings
Plugs into PC/laptopPlugs into PC/laptop
16,000 events recorded16,000 events recorded
Entire fleet downloaded at one time to Entire fleet downloaded at one time to one key with Blue Box.one key with Blue Box.
Key returned to PC where Red Box is Key returned to PC where Red Box is connected to serial port of PC---log connected to serial port of PC---log uploaded to KEYSOFT program for uploaded to KEYSOFT program for filtering and graphingfiltering and graphing
Data log can be exported in Access for Data log can be exported in Access for additional manipulation of dataadditional manipulation of data
Programming Programming operator codes and operator codes and settingssettings
Downloading Downloading event log dataevent log data
Can be done from the Can be done from the keypad, with a laptop, keypad, with a laptop, long connection to PC, long connection to PC, Cyberkey memory key or Cyberkey memory key or Cyberwire wireless Cyberwire wireless connection.connection.
Easy to learn, demo and Easy to learn, demo and program with desktop program with desktop plug in transformer plug in transformer connectionconnection
CYBERWIRECYBERWIRE2.4ghz Wireless Zigbee 2.4ghz Wireless Zigbee
radio radio Vehicle to host PC communicationVehicle to host PC communication
Both download event data and Both download event data and upload new codes and settingsupload new codes and settings
Up to 1500’ range indoors—up to Up to 1500’ range indoors—up to 4000’ outdoors4000’ outdoors
Ethernet “wired” radio mounted Ethernet “wired” radio mounted within the warehouse can within the warehouse can significantly increase rangesignificantly increase range
Easy set up Easy set up
Search mode automatic polingSearch mode automatic poling
Weatherproof design with indicator Weatherproof design with indicator LEDsLEDs
Simply plugs into Keytroller serial Simply plugs into Keytroller serial port---receives power from Keytrollerport---receives power from Keytroller
KEYSOFT PC KEYSOFT PC SOFTWARESOFTWARE
Programmable features:Programmable features: Sync clock/dateSync clock/date Pick com portPick com port Hour meter setting and maintenance limitHour meter setting and maintenance limit Maintenance due dateMaintenance due date Maintenance grace period (hours or days)Maintenance grace period (hours or days) Impact threshold X—Y---DurationImpact threshold X—Y---Duration Speed threshold and grace periodSpeed threshold and grace period Disable ignition after no movement (minutes)Disable ignition after no movement (minutes) Disable ignition after impact event (seconds)Disable ignition after impact event (seconds) User and vehicle ID set up with expiration dateUser and vehicle ID set up with expiration date Event log, filtering, graphingEvent log, filtering, graphing Seat switch timeout settingSeat switch timeout setting Oil pressure, water temp disable ignition settingOil pressure, water temp disable ignition setting Allow alarms or loggingAllow alarms or logging Create clone (codes and settings) fileCreate clone (codes and settings) file Read, write to and format CyberkeyRead, write to and format Cyberkey Cyberwire wireless radio settings and IDsCyberwire wireless radio settings and IDs
Evaluating Event Log Evaluating Event Log DataData
Event logs can be filtered by time, date, operator, vehicle, event and deleted or exported to Access or Excel for further manipulation
Why is Why is KEYTROLLERKEYTROLLER better?better?
No magnetic keys of any type—even your No magnetic keys of any type—even your ignition key is gone!ignition key is gone!
Keytroller can use your company RFID Keytroller can use your company RFID cardcard
Magnetic key is required to download Magnetic key is required to download event data---limited memory in unitevent data---limited memory in unit
Magnetic key is required to set shock Magnetic key is required to set shock threshold----Can only set in only .5g threshold----Can only set in only .5g increments vs .1 increments vs .1
Magnetic keys are expensive!! Drivers Magnetic keys are expensive!! Drivers loose or forget their keys causing hassles, loose or forget their keys causing hassles, downtime and loss of productivity downtime and loss of productivity replacing the key. Drivers get upset when replacing the key. Drivers get upset when asked to pay for replacementasked to pay for replacement
Programmer magnetic key is required to Programmer magnetic key is required to input new operator codesinput new operator codes
Supervisor magnetic key is required to Supervisor magnetic key is required to shut off alarm after shock event. shut off alarm after shock event.
KEYTROLLERKEYTROLLER VS VS OEM Lift Mfg Monitoring OEM Lift Mfg Monitoring
SystemsSystems Keytroller systems can work on ANY make or Keytroller systems can work on ANY make or
model Gas, LPG, Diesel or Electric vehicle and model Gas, LPG, Diesel or Electric vehicle and they will be compatible with ANY future forklifts they will be compatible with ANY future forklifts that you may purchasethat you may purchase
Most lift truck users have a variety of makes Most lift truck users have a variety of makes and models in use in their facility. Therefore, and models in use in their facility. Therefore, buying an OEM lift manufacturer’s monitoring buying an OEM lift manufacturer’s monitoring system—system—MAY NOT fit onto competitive lift MAY NOT fit onto competitive lift truckstrucks in use in the same plant. in use in the same plant.
If you purchase an OEM vehicle monitoring If you purchase an OEM vehicle monitoring system from a lift truck OEM and then purchase system from a lift truck OEM and then purchase additional lifts later from a different lift truck additional lifts later from a different lift truck manufacturer---your original OEM system will manufacturer---your original OEM system will NOT be compatible with the new lift trucks. NOT be compatible with the new lift trucks.
Lift truck OEM systems to not offer advanced Lift truck OEM systems to not offer advanced features like wireless connectivity or model features like wireless connectivity or model variations available from Keytroller.variations available from Keytroller.
When dealing with Keytroller, you are dealing When dealing with Keytroller, you are dealing with a company who’s expertise lies in design with a company who’s expertise lies in design and manufacturing of electronic vehicle and manufacturing of electronic vehicle monitoring systems. Lift truck manufacturers monitoring systems. Lift truck manufacturers are good at manufacturing lift trucks.are good at manufacturing lift trucks.
Demonstrating a Demonstrating a
KEYTROLLERKEYTROLLER Free 30 day trialFree 30 day trial Full functionality of the device Full functionality of the device
right from your desktop!right from your desktop! Plug in transformer and you Plug in transformer and you
can:can: Program the deviceProgram the device Create events, starts, impacts, etcCreate events, starts, impacts, etc Download event data using PC, Download event data using PC,
Cyberkey, or CyberwireCyberkey, or Cyberwire
After “learning” the device After “learning” the device from the desktop, the fully from the desktop, the fully programmed programmed KEYTROLLERKEYTROLLER can then be installed on a can then be installed on a forklift for further evaluation forklift for further evaluation for suitability to your for suitability to your application.application.
Results of implementing Results of implementing KEYTROLLERKEYTROLLER in your in your
forklift fleetforklift fleet 50+% reduction in damage is typical50+% reduction in damage is typical
Insures untrained, unauthorized operators cannot Insures untrained, unauthorized operators cannot operate your equipmentoperate your equipment
Eliminates keys totallyEliminates keys totally
Automates checklistAutomates checklist
Use your company RFID card!Use your company RFID card!
Helps with recurrent training (code/card expiration)Helps with recurrent training (code/card expiration)
Insures safe speedsInsures safe speeds
Insures maintenance is scheduledInsures maintenance is scheduled
Provides data for fleet managementProvides data for fleet management
Easy programming and downloadingEasy programming and downloading
Makes operators accountable for wreckless driving!Makes operators accountable for wreckless driving!
Creates a Creates a “CULTURE OF SAFETY”“CULTURE OF SAFETY” within your within your plant!plant!
KEYTROLLER, Inc.KEYTROLLER, Inc. The CompanyThe Company
Full line of award winning Full line of award winning equipment safety devicesequipment safety devices
Over 400 equipment dealers forOver 400 equipment dealers for local representation and supportlocal representation and support
OEM installation of devices availableOEM installation of devices available
Over 10,000 devices installed in the fieldOver 10,000 devices installed in the field
All models designed to install on any gas, All models designed to install on any gas, diesel or electric powered vehiclesdiesel or electric powered vehicles
Keytroller devices designed in house—full Keytroller devices designed in house—full factory supportfactory support
Manufactured and/or distributed from Tampa, Manufactured and/or distributed from Tampa, FlaFla
www.keytroller.com 813-877-4500 info@keytroller.com
KEYTROLLER, LLC.KEYTROLLER, LLC. The CompanyThe Company
Full line of award winning Full line of award winning equipment safety devicesequipment safety devices
Over 400 equipment dealers forOver 400 equipment dealers for local representation and supportlocal representation and support
OEM installation of devices availableOEM installation of devices available
Over 10,000 devices installed in the fieldOver 10,000 devices installed in the field
All models designed to install on any gas, All models designed to install on any gas, diesel diesel
or electric powered vehiclesor electric powered vehicles
Keytroller devices designed and supported in Keytroller devices designed and supported in househouse
Manufactured and/or distributed from Manufactured and/or distributed from Tampa, FlaTampa, Fla
www.keytroller.com 813-877-4500 info@keytroller.com
top related