Transcript
Mikrotik Hotspot with User Manager
Narun Koy, eintellego Networks
E-mail: narun@eintellegonetworks.asia
Position: Network Operation Engineer
What is Hotspot?Hotspot is a way to authorize users to access some network resources or internet.
To log in, users may use almost any web browser like Internet Explorer, Firefox,
Safari, Opera… etc.
What is User Manager?User Manager is a software use to create User, Limit bandwidth for user, Limit
period usage, Log user… etc.
It is a separate package for RouterOS.
User Manager is a RADIUS server application.
Who should use Hotspot?Internet Coffee, Restaurant, Super Market, School, Hotel, Hospital,
Advertisement purpose… etc.
Network Topology
Eth2 interface has been bridge with build-in
wireless card for Hotspot service
Anonymous users
Hotspot user name & password
ISP
Media Converter
Mikrotik RB 2011
Objective
I. Interface preparation for Hotspot service
1. Add eth2 and wireless card to bridge interface
2. Configure IP address for bridge interface
3. Configure wireless with blank password
II. Setup hotspot server and server profile
1. Setup Hotspot Server
2. Setup Hotspot Server Profile
III. Install User Manager and connect with RouterOS
1. Download and install User Manager
2. Connect Radius with User Manager
IV. Create Profile and Users
1. Create Bandwidth Profile
2. Create User Profile
3. Create Users
4. Login / Logout Page
I.1. Configure Bridge Interface
1
2
3
4
5
6
1
2
3
4
5
6
I.2. Configure IP for Bridge Interface
I.3. Configure wireless with blank password
1
2
3
4
5
6
II.1. Setup Hotspot Server
1
23
4 5
6 7
8 9
II.1. Setup Hotspot Server (Cont…)
Hotspot Server Result
II.2. Setup Hotspot Server Profile
1
23
4
5
II.2. Setup Hotspot Server Profile (Cont…)
6
78
III.1. Download and Install User Manager
1
2
III.1. Download and Install User Manager (cont...)
1
2 => Drop Package => Reboot Router Board
3 Verify package System => Package
III.2. Connect Radius with User Manager
1
2
3
4
Authenticate with User Manager
III.2. Connect Radius with User Manager (cont…)
1
2
Note:
You can’t access to this page if your PC is a hotspot client.
III.2. Connect Radius with User Manager (cont…)
11
Authenticate with Radius Server
2
IV.1. Create Bandwidth Profile
1
23
4
5
IV.2. Create User Profile
1
2
3
4
57
6
IV.3. Create Users
1
2
3
4
IV.4. Login / Logout Page
Note:
This page will pop up automatically when user connect the wireless hotspot.
References URL:
http://wiki.mikrotik.com/wiki/Manual:Hotspot_Introduction#Configuration_menus
http://wiki.mikrotik.com/wiki/Manual:IP/Hotspot#ip_hotspot_host
http://wiki.mikrotik.com/wiki/Manual:User_Manager
Question
&
Answer
top related