Memory Management Gordon College Stephen Brinton.
Post on 21-Dec-2015
222 Views
Preview:
Transcript
Memory Management
Gordon College
Stephen Brinton
Memory Management
• Background
• Swapping
• Contiguous Allocation
• Paging
• Segmentation
• Segmentation with Paging
Background
• Program must be brought into memory and placed within a process for it to be runhardware needs:
- speed differential (cache)- separate memory spaces (base and limit
register)
Base Register: 34000Limit Register: 12000
Address being used by a program must fall within this range or a trap (error) will result.
HW: address protection with base and limit registers
Address Binding
• Input queue – collection of processes on the disk that are waiting to be brought into memory to run the program
• Binding – symbolic addresses in a source program are bound to actually memory addresses.
Binding of Instructions and Data to Memory
• Compile time: If memory location known “before execution”, absolute code can be generated; must recompile code if starting location changes
• Load time: Must generate relocatable code if memory location is not known at compile time
• Execution time: Binding delayed until run time if the process can be moved during its execution from one memory segment to another. Need hardware support for address maps (e.g., base and limit registers).
Address binding of instructions and data to memory addresses canhappen at three different stages
Multistep Processing of a User Program
Logical vs. Physical Address Space• The concept of a logical address space that is bound
to a separate physical address space is central to proper memory management– Logical address – generated by the CPU; also
referred to as virtual address– Physical address – address seen by the memory
unit• Note:
– Logical and physical addresses are the same in compile-time and load-time address-binding schemes;
– Logical (virtual address) and physical addresses differ in execution-time address-binding scheme
Memory-Management Unit (MMU)• Hardware device that maps virtual to physical address
• In MMU scheme, the value in the relocation register is added to every address generated by a user process at the time it is sent to memory
• The user program deals with logical addresses; it never sees the real physical addresses
Dynamic Loading• Routine is not loaded until it is called• Better memory-space utilization;
unused routine is never loaded• Useful when large amounts of code
are needed to handle infrequently occurring cases
• No special support from the operating system is required implemented through program design
Dynamic Linking• Linking postponed until execution time• Small piece of code, stub, used to locate the
appropriate memory-resident library routine• Stub replaces itself with the address of the
routine, and executes the routine• Operating system needed to check if routine is
in some process’ memory address and allow access to others
• Dynamic linking is particularly useful for libraries– Otherwise a program must contain the library
code– This means wasted disk and memory space
Swapping• A process can be swapped temporarily out of memory to a
backing store, and then brought back into memory for continued execution
• Backing store – fast disk large enough to accommodate copies of all memory images for all users; must provide direct access to these memory images
• Roll out, roll in – swapping variant used for priority-based scheduling algorithms; lower-priority process is swapped out so higher-priority process can be loaded and executed
• Major part of swap time is transfer time; total transfer time is directly proportional to the amount of memory swapped
• Modified versions of swapping are found on many systems (i.e., UNIX, Linux, and Windows)
Schematic View of Swapping
Contiguous Allocation
• Main memory usually divided into two partitions:– Resident operating system, usually held in low
memory with interrupt vector– User processes then held in high memory
• Memory mapping and protection– Relocation-register scheme used to protect user
processes from each other, and from changing operating-system code and data
– Relocation register contains value of smallest physical address; limit register contains range of logical addresses – each logical address must be less than the limit register
A base and a limit register define a logical address space
HW address protection with base and limit registers
Contiguous Allocation (Cont.)• Multiple-partition allocation
– Hole – block of available memory; holes of various size are scattered throughout memory
– When a process arrives, it is allocated memory from a hole large enough to accommodate it
– Operating system maintains information about:a) allocated partitions b) free partitions (hole)
OS
process 5
process 8
process 2
OS
process 5
process 2
OS
process 5
process 2
OS
process 5
process 9
process 2
process 9
process 10
Dynamic Storage-Allocation Problem
• First-fit: Allocate the first hole that is big enough• Best-fit: Allocate the smallest hole that is big enough;
must search entire list, unless ordered by size. Produces the smallest leftover hole.
• Worst-fit: Allocate the largest hole; must also search entire list. Produces the largest leftover hole.
How to satisfy a request of size n from a list of free holes
First-fit and best-fit are better than worst-fit in terms of speed and storage utilization
Fragmentation• External Fragmentation – total memory space exists to
satisfy a request, but it is not contiguous• Internal Fragmentation – allocated memory may be slightly
larger than requested memory; this size difference is memory internal to a partition, but not being used
• Reduce external fragmentation by compaction– Goal: shuffle memory contents to place all free memory
together in one large block– Compaction is possible only if relocation is dynamic, and
is done at execution time– Another solution to external fragmentation: allow logical
space of process to be noncontiguous – paging and segmentation.
Paging• Logical address space of a process can be
noncontiguous; process is allocated physical memory whenever the latter is available
• Basic Method:– Divide physical memory into fixed-sized blocks called
frames (size is power of 2, between 512 bytes and 16MB)
– Divide logical memory into blocks of same size called pages.
– Keep track of all free frames– To run a program of size n pages, need to find n free
frames and load program from backing store– Set up a page table to translate logical to physical
addresses• Internal fragmentation
Address Translation Scheme• Address generated by CPU is divided into:
– Page number (p) – used as an index into a page table which contains base address of each page in physical memory
– Page offset (d) – combined with base address to define the physical memory address that is sent to the memory unit
Page number Page offset
p d
m-n n
Address Translation Architecture
Paging Example
Free Frames
Before allocation After allocation
Implementation of Page Table
• Page table is kept in main memory• Page-table base register (PTBR) points to
the page table• Page-table length register (PRLR) indicates
size of the page table• In this scheme every data/instruction access
requires two memory accesses. One for the page table and one for the data/instruction.
• The two memory access problem can be solved by the use of a special fast-lookup hardware cache called associative memory or translation look-aside buffers (TLBs)
Associative Memory
• Associative memory – parallel search
Address translation (A´, A´´)– If A´ is in associative register, get frame # out :
Fast lookup– TLB miss: Otherwise get frame # from page
table in memory
Page # Frame #
Paging Hardware With TLB
Effective Access Time
• Associative Lookup = time unit• Assume memory cycle time is 1 microsecond (100 ns)• Hit ratio – percentage of times that a page number is
found in the associative registers; ratio related to number of associative registers
• Hit ratio = • Effective Access Time (EAT)
EAT = (1 + ) + (2 + )(1 – )
= 2 + –
(100 + 20) .8 + (200 + 20)(1-.8)
120 X .80 + 220 * .2 = 140 ns
Memory Protection
• Memory protection implemented by associating protection bit with each frame
• Valid-invalid bit attached to each entry in the page table:– “valid” indicates that the associated page is
in the process’ logical address space, and is thus a legal page
– “invalid” indicates that the page is not in the process’ logical address space
Valid (v) or Invalid (i) Bit In A Page Table
Page Table Structure• Hierarchical Paging
• Hashed Page Tables
• Inverted Page Tables
Hierarchical Page Tables
• Break up the logical address space into multiple page tables
• A simple technique is a two-level page table
Two-Level Paging Example• A logical address (on 32-bit machine with 4K page size) is divided into:
– a page number consisting of 20 bits– a page offset consisting of 12 bits
• Since the page table is paged, the page number is further divided into:– a 10-bit page number – a 10-bit page offset
• Thus, a logical address is as follows:
where pi is an index into the outer page table, and p2 is the displacement within the page of the outer page table
page number page offset
pi p2 d
10 10 12
Address-Translation Scheme
• Address-translation scheme for a two-level 32-bit paging architecture
Two-Level Page-Table Scheme
Hashed Page Tables
• Common in address spaces > 32 bits
• The virtual page number is hashed into a page table. This page table contains a chain of elements hashing to the same location.
• Virtual page numbers are compared in this chain searching for a match. If a match is found, the corresponding physical frame is extracted.
Hashed Page Table
Inverted Page Table
• One entry for each real page of memory• Entry consists of the virtual address of the
page stored in that real memory location, with information about the process that owns that page
• WHY: Decreases memory needed to store each page table, but increases time needed to search the table when a page reference occurs
• Use hash table to limit the search to one — or at most a few — page-table entries
Inverted Page Table Architecture
Shared Pages• Shared code
– One copy of read-only (reentrant) code shared among processes (i.e., text editors, compilers, window systems).
• Private code and data – Each process keeps a separate copy of
the code and data– The pages for the private code and data
can appear anywhere in the logical address space
Shared Pages Example
Segmentation
• Memory-management scheme that supports user view of memory
• A program is a collection of segments. A segment is a logical unit such as:
main program,procedure, function,method,object,local variables, global variables,common block,stack,symbol table, arrays
User’s View of a Program
Logical View of Segmentation
1
3
2
4
1
4
2
3
user space physical memory space
Segmentation Architecture
• Logical address consists of a two tuple:<segment-number, offset>
• Segment table – maps two-dimensional physical addresses; each table entry has:– base – contains the starting physical address where
the segments reside in memory– limit – specifies the length of the segment
• Segment-table base register (STBR) points to the segment table’s location in memory
• Segment-table length register (STLR) indicates number of segments used by a program; segment number s is legal if s < STLR
Segmentation Architecture (Cont.)• Relocation.
– dynamic– by segment table
• Sharing.– shared segments– same segment number
• Allocation.– first fit/best fit– external fragmentation
Segmentation Architecture (Cont.)
• Protection. With each entry in segment table associate:– validation bit = 0 illegal segment– read/write/execute privileges
• Protection bits associated with segments; code sharing occurs at segment level
• Since segments vary in length, memory allocation is a dynamic storage-allocation problem
• A segmentation example is shown in the following diagram
Address Translation Architecture
Example of Segmentation
Sharing of Segments
top related