Masters Degrees of the Energy Programme...Masters Degrees of the Energy Programme Dr Ilai Sher Course Director of Energy Systems & Thermal Processes MSc Admissions Tutor The Energy
Post on 29-May-2020
8 Views
Preview:
Transcript
Masters Degrees of the Energy Programme
Dr Ilai Sher Course Director of Energy Systems & Thermal Processes MSc Admissions Tutor
The Energy Sector’s Global Importance
Secure affordable and reliable energy supply underpins our political stability, ability to manufacture and export services competitively and a comfortable standard of life;
We face unprecedented demands for
energy from the developing world and the need to produce energy in a clean and sustainable manner.
Courtesy of BP PLC
SEEA
Environmental Technology
Energy
Energy Research
and Strategy
Offshore Renewable
Energy Engineering
Centre
Bioenergy & Resource
Management Centre
Oil & Gas Engineering
Centre
Combustion, Carbon
Capture & Storage Centre
Power Engineering
Centre
Agrifood
School of Energy, Environment & Agrifood (SEEA)
Our Major Facilities
• Combustion, Gasification and CO2 Capture Pilot Plants
• Anaerobic Digestion Pilot Plant
• Algae Biomass and Bioenergy Laboratories
• Wind Turbine Test Site and Vertical Axis Wind Turbine
Test Facility
• Ocean Systems Test Laboratory
• Concentrated Solar Power
• Structural Integrity Laboratory
• Electrical Power and Machines
• Gas Turbine Engineering Laboratories
• Process Systems Flow Laboratory
• Advanced Materials for Low Emission Power Plants
• Advanced Surface Protection
• Algae Biomass
• Biomass and Bioenergy
• Energy from Waste
• Carbon Capture and Transport
• Gas Turbines for H2-rich IGCC Syngas
• Oxy-fuel Combustion
• Plant Life Extension
• Next Generation Coal Power Plants
• Underground Coal Gasification
• Wind Power
• Tidal stream
• Photovoltaic
• Fuel Cells/membranes
Our Major Research Activities
Our Courses
Advanced Science and Engineering
Economics and
Finance
The Environment
Legislation and
Regulation
The context
Energy Theme MSc Courses
Advanced Science and
Engineering for Energy
Courses
Courses with Balanced
Context and Specialist
Technical Content
Energy Context Courses
Advanced Mechanical
Engineering Biofuels Process Engineering
Energy Supply for Low Carbon
Futures
Energy Systems and Thermal
Processes Carbon Capture and Transport
Renewable Energy
Technology
Flow Assurance for Oil and
Gas Production OOT* Subsea Engineering OOT Risk Management
Materials for Energy Systems OOT Pipeline Engineering Gas Energy
OOT Offshore Renewable
Energy
Renewable Energy
Engineering
OOT Offshore Materials
Engineering Design of Rotating Machines
Process Systems Engineering Energy from Waste *OOT = Offshore and Ocean Technology
MSc Course Structure
Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep
Taught
modules
Group
project
Research
thesis
• Scientific thesis
• Research training
• Externally linked
and funded where
possible
• Team working
• Multidisciplinary
• Integrate subjects
• Professional skills
• Lectures
• Seminars
• Lab work
• Fieldwork
• Assignments
• Private study
Example MSc Thesis Projects
• Examination of Pipeline Repair Methodologies. • Materials for CO2 transport pipelines. • Renewable energy options for island communities. • Environmental Reduction Factors for Seawater Corrosion Fatigue. • Modelling of Structural Stresses in the Helical Armour Wires of Oil Field Pipes and
Umbilical's. • Investigation of the Energy Savings Opportunities / Inpost-Combustion Capture Process in
Supercritical Pulverized Coal Power Plant. • Enhanced Oil Recovery with Storage Consideration. • Decommissioning of Nuclear Power Plants in the EU. • Feasibility Assessment of Installing Photovoltaic Systems in a House in Alicante, Spain. • Modelling Gas-Turbine Power Plant Integrated with Inlet Air Cooling Systems for Hot and
Humid Environment. • Dynamics of a Drive Train System for Offshore Floating Wind Turbines. • Simulation of the Flooding Process of the Tidal Energy Converter ‘Delta Stream’ during
Deployment and Decommissioning.
MSc Advanced Mechanical Engineering Full-time/part-time
Course Modules
• Structural Integrity
• Stress Analysis of Components and Machines
• Fluid Mechanics and Loading
• Advanced Control Systems
• Computer Simulations for Engineering Design
• Power Generation Systems
• Risk and Reliability Engineering
• Management for Technology
Group Project
Individual Project
MSc Renewable Energy Engineering Full-time/part-time
Course Modules
• Dynamics of Fluidic Energy Devices
• Structural Integrity of Renewable Energy
Systems
• Risk and Reliability Engineering
• Computer Simulations for Engineering Design
• Power Electronics & Machines
• Advanced Control Systems
• Testing & Routes to Certification
• Energy Policy, Carbon Markets and Futures
Group Project
Individual Project
MSc Carbon Capture & Storage Full-time/part-time
Course Modules
• Introduction to Carbon Capture and Transport
• Carbon Capture Technologies
• Carbon Transport Technologies
• Management for Technology
• Reliability and Risk Analysis
• Process Plant Operations
• Power Generation Systems
• Process Measurement Systems
• Advanced Control Systems
• Process Simulation and Design
• Computational Engineering Techniques for Industrial Processes
Group Project
Individual Project
Course Modules
• Heat Transfer
• Industrial Heating Systems
• Power Generation Systems
• Thermal Systems Operation and Design
• Management for Technology
• Environmental Management
• Renewable Energy Systems
• Energy Management for Industry
• Process Measurement Systems (Option)
• Advanced Control Systems (Option)
• Computational Fluid Dynamics (Option)
Group Project
Individual Project
MSc Energy Systems & Thermal Processes Full-time/part-time
Course Modules
• Introduction to Flow Assurance
• Multiphase Flows
• Production Technology and Chemistry
• Management for Technology
• Risk and Reliability Engineering
• Process Plant Operations
• Advanced Control Systems
• Pumps and Pumping Systems
• Structural Integrity (Option)
• Process Measurement Systems (Option)
• Computational Fluid Dynamics (Option)
• Process Simulation and Design (Option)
Group Project
Individual Project
MSc Flow Assurance for Oil & Gas Production Full-time/part-time
Course Modules
• Introduction to Process Systems Engineering
• Management for Technology
• Reliability and Risk Analysis
• Environmental Management
• Pumps and Pumping Systems (Option)
• Process Measurement Systems (Option)
• Process Plant Operations (Option)
• Advanced Control Systems (Option)
• Process Simulation and Design (Option)
• Computational Fluid Dynamics (Option)
• Thermal Systems Operation and Design (Option)
Group Project
Individual Project
MSc Process Systems Engineering Full-time/part-time
Course Modules
• Biological Processes
• Biofuels Process and Technology
• Energy from Biomass
• Management for Technology
• Environmental Management
• Process Plant Operations
• Advanced Control Systems
• Process Simulation and Design
Group Project
Individual Project
MSc Biofuels Process Engineering Full-time/part-time
Course Modules
• Bearing Design
• Rotordynamics
• Gear Design
• Fatigue and Fracture
• Management for Technology
• Rotating Equipment Selection
• Computer Aided Engineering
• Stress Analysis of Machine Components
• Noise, Vibration and Machine Diagnostics
Group Project
Individual Project
MSc Design of Rotating Machines Full-time/part-time
Course Modules
• Introduction to Materials Engineering for
Energy Systems
• Renewable Energy Technologies:
Fundamentals
• Failure of Materials and Structures
• Fuels and Energy Conversion
• Materials and Reliability in Energy Systems
• Renewable Energy Technology: Systems
• Energy Production, Emissions Control, CC
and Transport
• Surface Science and Engineering
Group Project
Individual Project
MSc Materials for Energy Systems Full-time/part-time
MSc Energy Supply for Low Carbon Futures Full-time/part-time
Course Modules
• Principles of Sustainability
• Demand Management for Industry and the
Built Environment
• Renewable Energy Technologies:
Fundamentals
• Fuels and Energy Conversion
• Materials and Reliability in Energy Systems
• Renewable Energy Technology: Systems
• Energy Production, Emissions Control, CC
and Transport
• Energy Policy, Carbon Markets and Futures
Group Project
Individual Project
MSc Renewable Energy Technology Full-time/part-time
Course Modules
• Principles of Sustainability
• Environmental Valuation
• Renewable Energy Technologies:
Fundamentals
• Fuels and Energy Conversion
• Evaluating Sustainability
• Renewable Energy Technology: Systems
• Renewable Energy Technology: Design
Case
• Energy Policy, Carbon Markets and Futures
Group Project
Individual Project
Course Modules
• Corrosion in the Offshore Environment
• Offshore Inspection
• Technology and Project Management
• Safety Risk and Reliability Offshore
• Subsea Oil and Gas Exploitation
• Materials in the Offshore Environment
• Offshore Pipeline Design and Installation (Option)
• Failure of Materials and Structures (Option)
• Offshore Renewable Energy: Technology (Option)
• Finite Element Analysis and Materials Modelling (Option)
• Reliability Engineering and Asset Risk Management (Option)
• Energy Policy, Carbon Market and Futures (Option)
Group Project
Individual Project
MSc Offshore and Ocean Technology with Subsea Engineering Full-time/part-time
Course Modules
• Corrosion in the Offshore Environment
• Offshore Inspection
• Technology and Project Management
• Safety Risk and Reliability Offshore
• Offshore Pipeline Design and Installation
• Materials in the Offshore Environment
• Subsea Oil and Gas Exploitation (Option)
• Failure of Materials and Structures (Option)
• Offshore Renewable Energy: Technology (Option)
• Finite Element Analysis and Materials Modelling (Option)
• Reliability Engineering and Asset Risk Management (Option)
• Energy Policy, Carbon Market and Futures (Option)
Group Project
Individual Project
MSc Offshore and Ocean Technology with Pipeline Engineering Full-time/part-time
Course Modules
• Corrosion in the Offshore Environment
• Offshore Inspection
• Technology and Project Management
• Safety Risk and Reliability Offshore
• Offshore Renewable Energy: Technology
• Energy Policy, Carbon Market and Futures
• Offshore Pipeline Design and Installation (Option)
• Materials in the Offshore Environment (Option)
• Subsea Oil and Gas Exploitation (Option)
• Failure of Materials and Structures (Option)
• Finite Element Analysis and Materials Modelling (Option)
• Reliability Engineering and Asset Risk Management (Option)
Group Project
Individual Project
MSc Offshore and Ocean Technology with Offshore Renewable Energy Full-time/part-time
Course Modules
• Subsea Oil and Gas Exploitation
• Safety Risk and Reliability Offshore
• Offshore Inspection
• Corrosion in the Offshore Environment
• Technology and Project Management
• Reliability Engineering and Asset Risk Management
• Offshore Renewable Energy: Technology (Option)
• Energy Policy, Carbon Market and Futures (Option)
• Offshore Pipeline Design and Installation (Option)
• Materials in the Offshore Environment (Option)
• Failure of Materials and Structures (Option)
• Finite Element Analysis and Materials Modelling (Option)
Group Project
Individual Project
MSc Offshore and Ocean Technology with Risk Management Full-time/part-time
Course Modules
• Materials in the Offshore Environment
• Safety Risk and Reliability Offshore
• Offshore Inspection
• Failure of Materials and Structures
• Corrosion in the Offshore Environment
• Technology and Project Management
• Offshore Renewable Energy: Technology (Option)
• Energy Policy, Carbon Market and Futures (Option)
• Offshore Pipeline Design and Installation (Option)
• Subsea Oil and Gas Exploitation (Option)
• Finite Element Analysis and Materials Modelling (Option)
• Reliability Engineering and Asset Risk Management (Option)
Group Project
Individual Project
MSc Offshore and Ocean Technology with Offshore Materials Engineering Full-time/part-time
MSc Gas Energy Full-time/part-time
Course Modules
• Conventional and Unconventional Gas
Production
• Safety, Risk and Reliability Offshore
• Inspection and Maintenance
• Fuels and Energy Conversion
• Technology and Project Management
• Energy Production, Emissions Control, CC
and Transport
• Pipelines and Gas Processing
• Energy Policy, Carbon Markets and Futures
Group Project
Individual Project
MSc Energy from Waste Full-time/part-time
Course Modules
• Environmental Risks: Hazard, Assessment
and Management
• Waste Disposal and Resource Recovery
• Waste Treatment Processes
• Fuels and Energy Conversion
• Technology and Project Management
• Energy Production, Emissions Control, CC
and Transport
• Renewable Energy Technology: Design
Case
• Energy from Waste Operations
Group Project
Individual Project
top related