Makino wire EDM‘s & System 3R Tooling Machine table layout€¦ · 3R Concept WEDMing in Makino EU 64 MIC-2530 00-03 Subject to modifications. 3x 3R-200.6J-1 3R-239-745 3R-200.6J-1
Post on 02-Aug-2020
3 Views
Preview:
Transcript
System 3R
Machine table layoutMakino wire EDM‘s & System 3R Tooling
2
CONTENTS
3141, horizontal clamping ......................................................................................... page 3DUO43 with horizontal 3Rulers .................................................................................. page 4DUO43 with vertical 3Rulers....................................................................................... page 5DUO64, horizontal clamping ..................................................................................... page 6DUO64, vertical clamping .......................................................................................... page 7EH8, EE8 & EC8, horizontal clamping ......................................................................... page 8EU43, horizontal clamping ......................................................................................... page 9EU64, horizontal clamping ....................................................................................... page 10SP43, horizontal clamping ........................................................................................ page 11SP43 (Japan), horizontal clamping ............................................................................ page 12SP43 (USA), horizontal clamping .............................................................................. page 13SP43 (USA), horizontal clamping .............................................................................. page 14SP64, horizontal clamping ........................................................................................ page 15SP64, vertical clamping ............................................................................................ page 16U86, horizontal clamping ......................................................................................... page 17
3
MIC-2107 93.04 Subject to modifications.
3R Concept WEDMing in Makino 3141
3R-239-545
2x3R-200.39J-2
3R-200.3J-2 Reference element 345 mm,pitch 50 mm, (50 mm from thetable edge).
3R-239-545 3Ruler 545x60x30 mm, completewith holders, supports andclamping details.
3R-200.3J-2 Referenz Element 345 mm,Lochabstand 50 mm, (50 mmvon der Tischkante).
3R-239-545 3R Lineal 545x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.3J-2 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 50 mm).
3R-239-545 3Règle 545x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.3J-2 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 50 mm).
3R-239-545 3Riga 545x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
Note: Poblems to reach the working area with, 3R-210J-1, 3R-226J, 3R-294.2, 3R-294.3,3R-201J, 3R-204
4
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
MIC2751 Makino DUO43Date: 2010-01-27Reference elements: 3R-200.49J-13Ruler: 3R-239-495
5
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
MIC2752 Makino DUO43Date: 2010-01-27Reference elements: 3R-200.49J-13Ruler: 3R-239-345
6
MIC2340 2008 11
System 3R International AB Tel: +46 8 620 20 00 Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 Sweden www.system3r.com
3R-200.49J-1 (2 pcs)
Makino DUO64
3R-239-695 (2 pcs)
7
MIC2339 2008 11
System 3R International AB Tel: +46 8 620 20 00 Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 Sweden www.system3r.com
3R-200.3J-1 (4 pcs)
Makino DUO64
3R-239-445 (2 pcs)
8
MIC-2406 93-11 Subject to modifications.
3R Concept WEDMingin Makino EH 8 / EE 8 / EC 8
2x3R-239-950
4x3R-200.3J-4
3R-200.3J-2 Reference element 345 mm,pitch 50 mm, (80 mm from thetable edge).
3R-239-950 3Ruler 950x86x36 mm, completewith holders, supports andclamping details.
3R-200.3J-2 Referenz Element 345 mm,Lochabstand 50 mm, (80 mmvon der Tischkante).
3R-239-950 3R Lineal 950x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.3J-2 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 80 mm).
3R-239-950 3Règle 950x86x36 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.3J-2 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 80 mm).
3R-239-950 3Riga 950x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.
Note: Problems to reach the working area with 3R-294.2, 3R-294.3, 3R-294.4, 3R-294.5 3R-201J, 3R-204, 3R-210J-1, 3R-226J and others.
9
MIC-2111 2002-08 Subject to modifications.
System 3R International AB Tel: +46 (0) 8 620 2083 home page: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 (0) 8 384516 http://www.system3r.seSweden
3R Concept WEDMingin Makino SP43 / EU 43
3R-200.6J-1
2x3R-200.4J-1
3R-200.4J-1 Elément de référence 395 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).
3R-200.6J-1 Elément de référence 545 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).
3R-239-5 15 3Règle 515x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.4J-1 Base a coda di rondine 395 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).
3R-200.6J-1 Base a coda di rondine 545 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).
3R-239-515 3Riga 515x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.6J-1 Referenz Element 545 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).
3R-239-515 3R Lineal 515x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.4J-1 Referenz Element 395 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).
3R-200.4J-1 Reference element 395 mm,pitch 50 mm, (40 mm from thetable edge).
3R-200.6J-1 Reference element 545 mm,pitch 50 mm, (40 mm from thetable edge).
3R-239-515 3Ruler 515x60x30 mm, completewith holders, supports andclamping details.
3R-239-515
system 3R
10
3R Concept WEDMing in Makino EU 64
MIC-2530 00-03 Subject to modifications.
3x3R-200.6J-1
3R-239-745
3R-200.6J-1 Reference element 545 mm,pitch 50 mm, (90 mm from thetable edge).
3R-239-745 3Ruler 745x86x36 mm, completewith holders, supports andclamping details.
3R-200.6J-1 Referenz Element 545 mm,Lochabstand 50 mm, (90 mmvon der Tischkante).
3R-239-745 3R Lineal 745x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.6J-1 Elément de référence 5 45 mm,distance des trous 50 mm, (distancedu bord de la table 90 mm).
3R-239-745 3Règle 745x86x36 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.6J-1 Base a coda di rondine 545 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 90 mm).
3R-239-745 3Riga 745x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.
11
MIC-2111 2002-08 Subject to modifications.
System 3R International AB Tel: +46 (0) 8 620 2083 home page: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 (0) 8 384516 http://www.system3r.seSweden
3R Concept WEDMingin Makino SP43 / EU 43
3R-200.6J-1
2x3R-200.4J-1
3R-200.4J-1 Elément de référence 395 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).
3R-200.6J-1 Elément de référence 545 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).
3R-239-5 15 3Règle 515x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.4J-1 Base a coda di rondine 395 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).
3R-200.6J-1 Base a coda di rondine 545 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).
3R-239-515 3Riga 515x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.6J-1 Referenz Element 545 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).
3R-239-515 3R Lineal 515x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.4J-1 Referenz Element 395 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).
3R-200.4J-1 Reference element 395 mm,pitch 50 mm, (40 mm from thetable edge).
3R-200.6J-1 Reference element 545 mm,pitch 50 mm, (40 mm from thetable edge).
3R-239-515 3Ruler 515x60x30 mm, completewith holders, supports andclamping details.
3R-239-515
system 3R
12
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.seSweden
WEDMing with S3R
13
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.seSweden
WEDMing with S3R
14
WEDMing with S3R
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.seSweden
15
system 3R MIC-2113 2002-08 Subject to modifications.
3R Concept WEDMingin Makino SP 64
System 3R International AB Tel: +46 (0) 8 620 2083 home page: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 (0) 8 384516 http://www.system3r.seSweden
3R-200.3J-1 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).
3R-200.49J-1 Elément de référence 495 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).
3R-239-715.86 3Règle 715x86x36 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.3J-1 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).
3R-200.49J-1 Base a coda di rondine 495 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).
3R-239-715.86 3Riga 715x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.3J-1 Reference element 345 mm,pitch 50 mm, (40 mm from thetable edge).
3R-200.49J-1 Reference element 495 mm,pitch 50 mm, (40 mm from thetable edge).
3R-239-715.86 3Ruler 715x86x36 mm, completewith holders, supports andclamping details.
3R-200.49J-1 Referenz Element 495 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).
3R-239-715.86 3R Lineal 715x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.3J-1 Referenz Element 345 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).
2x3R-200.3J-1
2x3R-200.49J-1
3R-239-715.86 (K-30668)
16
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.com Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.se Sweden
WEDMing with S3R
17
3R Concept WEDMing in Makino U86
MIC-2532 00-09 Subject to modifications.
3R-239-950
2x3R-200.6J-1
2x3R-200.3J-1
3R-200.6J-1 Referenz Element 545 mm,Lochabstand 50 mm, (90 mmvon der Tischkante).
3R-200.3J-1 Referenz Element 345 mm,Lochabstand 50 mm, (90 mmvon der Tischkante).
3R-239-950 3R Lineal 950x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.6J-1 Reference element 545 mm,pitch 50 mm, (90 mm from thetable edge).
3R-200.3J-1 Reference element 345 mm,pitch 50 mm, (90 mm from thetable edge).
3R-239-950 3Ruler 950x86x36 mm, completewith holders, supports andclamping details.
3R-200.6J-1 Elément de référence 545 mm,distance des trous 50 mm, (distancedu bord de la table 90 mm).
3R-200.3J-1 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 900 mm).
3R-239-950 3Règle 950x86x36 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.6J-1 Base a coda di rondine 545 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 90 mm).
3R-200.3J-1 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 90 mm).
3R-239-950 3Riga 950x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.6J-1 and 3R-200.3J-1 can be moved50 mm (on each side) closer to the table edge, for use of other 3R-tooling.
T-23
52-E
15.
01©
GF
Mac
hini
ng S
olut
ions
, Sys
tem
3R
Inte
rnat
iona
l AB
, 201
5Su
bjec
t to
mod
ifiac
tions
.
System 3R’s Customer Services is uniquely positioned to help you maximize the availability, value, precision and productivity of your System 3R equipment. Our cost-effective, customer-centric and expert services put your success at the center, ramp up your productivity and ensure predictable, uninterrupted uptime. System 3R’s service engineers are your expert partners for a wide range of success-triggering services.
For more info ask your local System 3R dealer.
For contact details, please refer to: www.system3r.com.
+ Ensuring productivity.
+ Reducing running costs and wasted parts.
+ Maximizing the return on your System 3R investments.
+ Extending the product lifetime of your System 3R equipment while maintaining optimum precision.
+ Ensuring robot cell safety satisfies present machine directives.
Optimize the uptime of your equipment with our Customer Services
top related