LIBERTYvirginiatile.s3.amazonaws.com/profiles/pdf/AUS.LIBERTY.pdf · 2018-07-02 · Liberty New England 113/4”x235/8” - 30x60 cm COORDINATING TRIMS Bullnose Cove base LIBERTY
Post on 02-Aug-2020
1 Views
Preview:
Transcript
LIBERTYLiberty Calacatta Centennial Prism Wall Mosaic 11”x11” - 28x28 cm
Liberty Calacatta Centennial 12”x22” - 30.5x56 cmLiberty Calacatta Centennial Bullnose 3”x24” - 7.2x60 cm
Liberty Calacatta Centennial 113/4”x235/8” - 30x60 cmLiberty Calacatta Centennial Chevron Mosaic 71/2”x123/8” - 19x31.5 cm
Liberty Franklin Gray Mosaic 113/4”x113/4” - 30x30 cm
Calacatta Centennial New England
Franklin GrayMonument Cream
LIBERTY COLORS
COLORED BODY PORCELAIN TILE
GRAND, BRILLIANT, RENOWNEDMarble has always been one of the most popular materials in the farmhouse trend, but this collection exudes an unmatched brilliance. Illuminate your home or working space with one of the four distinguished shades of sophistication. Available in highly refined shades, a complete range of sizes, and matching glossy wall tiles.
• Distinguished marbles
• Delicate to deep veins
• Precious geometric mosaics
• Bright whites to cool grays
• Matching glossy wall tile range
LIBERTYLiberty Franklin Gray 113/4”x235/8” - 30x60 cm
Calacatta Centennial
Monument Cream
LIBERTYCOLORED BODY PORCELAIN TILE
Franklin Gray
New England
SHADE VARIATION
LIBERTYCOLORED BODY PORCELAIN TILE
LIBERTYLiberty Calacatta Centennial Chevron Mosaic 71/2”x123/8” - 19x31.5 cm
V2 SLIGHT VARIATION
LIBERTYLiberty New England 113/4”x235/8” - 30x60 cm
Compliant with standards ANSI A137.1-2012
LIBERTYCOLORED BODY PORCELAIN TILE
LIBERTYLiberty Monument Cream Brick Mosaic 113/4”x113/4” - 30x30 cmLiberty Monument Cream 113/4”x235/8” - 30x60 cm
CRAFTCraft 3D Rice 12”x22” - 30.5x56 cm
V2 SLIGHT VARIATION Compliant with standards ANSI A137.1-2012
LIBERTYLiberty Franklin Gray 113/4”x235/8” - 30x60 cm
SIZE - THICKNESS 113/4”x 235/8” - 30x60 cm 9 mm FINISH MATTE
LIBERTY
MOSAICS & DECORS
LIBERTY Calacatta Centennial Brick Mosaic113/4”x113/4” - 30x30 cm(Mosaic 2”x4”)610110000334
LIBERTY Calacatta Centennial Mosaic113/4”x113/4” - 30x30 cm(Mosaic 2”x2”)610110000301
LIBERTY Monument Cream Brick Mosaic113/4”x113/4” - 30x30 cm(Mosaic 2”x4”)610110000336
LIBERTY Monument Cream Mosaic113/4”x113/4” - 30x30 cm(Mosaic 2”x2”)610110000303
LIBERTY New EnglandBrick Mosaic113/4”x113/4” - 30x30 cm(Mosaic 2”x4”)610110000335
LIBERTY New England Mosaic113/4”x113/4” - 30x30 cm(Mosaic 2”x2”)610110000302
LIBERTY Franklin GrayBrick Mosaic113/4”x113/4” - 30x30 cm(Mosaic 2”x4”)610110000337
LIBERTY Calacatta Centennial Chevron Mosaic71/2”x123/8” - 19x31.5 cm(Mosaic 2”x5”)610110000338
LIBERTYFranklin Gray Chevron Mosaic71/2”x123/8” - 19x31.5 cm(Mosaic 2”x5”)610110000339
LIBERTY Franklin Gray Mosaic113/4”x113/4” - 30x30 cm(Mosaic 2”x2”)610110000304
LIBERTY Calacatta Centennial113/4”x235/8” - 30x60 cm610010001750
LIBERTY Monument Cream113/4”x235/8” - 30x60 cm610010001752
LIBERTY New England113/4”x235/8” - 30x60 cm610010001751
LIBERTY Franklin Gray113/4”x235/8” - 30x60 cm610010001753
V2 SLIGHT VARIATION
LIBERTYLiberty New England 113/4”x235/8” - 30x60 cm
COORDINATING TRIMS
Bullnose Cove base
LIBERTY Calacatta Centennial 610130000800 610130000804
Bullnose 3”x 24” - 7.2x60 cm
Cove base6”x12” - 15x30 cm 9 mm
LIBERTY New England 610130000801 610130000900
LIBERTY Monument Cream 610130000802 610130000901
LIBERTY Franklin Gray 610130000803 610130000902
Compliant with standards ANSI A137.1-2012
LIBERTYWHITE BODY WALL TILE
Calacatta Centennial
SHADE VARIATION
LIBERTYLiberty Calacatta Centennial Wall Bullnose 2”x12” - 5x30.5 cm
Liberty Cal. Cent. Herringbone Wall Mos. 113/4”x113/4” - 30x30 cm
LIBERTYWHITE BODY WALL TILE
LIBERTY Calacatta Centennial12”x22” - 30.5x56 cm - Rectified - Glossy610010001900
MOSAICS & DECORS
LIBERTY Calacatta Centennial Herringbone Wall Mosaic113/4”x113/4” - 30x30 cm(Mosaic 1”x2”)610110000325
LIBERTY Calacatta Centennial Prism Wall Mosaic11”x11” - 28x28 cm(Mosaic 23/4”x51/2”)610110000340
COORDINATING TRIMS
Wall Bullnose
LIBERTY Calacatta Centennial 610140000090
Wall Bullnose 2”x 12” - 5x30.5 cm
LIBERTY Calacatta Centennial Brick31/8”x 123/8” - 8x31.5 cm Glossy610010001901
Compliant with standards ANSI A137.1-2012V2 SLIGHT VARIATION
Wall Bullnose
LIBERTY Calacatta Centennial 610140000090
Wall Bullnose 2”x 12” - 5x30.5 cm
LIBERTYLiberty Cal. Centennial Prism Wall Mosaic 11”x11” - 28x28 cm
Liberty Calacatta Centennial Brick 31/8”x123/8” - 8x31.5 cmLiberty Cal. Cent. Herringbone Wall Mos. 113/4”x113/4” - 30x30 cm
The Health Product Declaration® logo is a registered trademark of HPD Collaborative.
www.atlasconcordeusa.comATLAS CONCORDE USA, INC. - 117 Seaboard Lane - Suite F170 - Franklin, TN 37067 - USA
WHITE BODY WALL TILE
Compliant with standards ANSI A137.1-2012 FINISH GLOSSYSIZE - THICKNESS
FIELD TILES - Available in all colors
Commercial size (in) Nominal size (in) Thickness (mm) Finish Rectified edge
12"x22" 12" x 22" 8.5 mm Glossy Yes
3”x12” 3 1/8” x 12 3/8” 8.5 mm Glossy -
MOSAICS AND COORDINATING TRIMS - Available in all colors
Commercial size (in) Nominal size (in) Thickness (mm) Finish
Wall Bullnose 2”x12” 2" x 12" 8.5 mm Glossy
Herringbone Wall Mosaic 1”x2” 11 3/4” x 11 3/4” 8.5 mm Glossy
Prism Wall Mosaic 23/4”x51/2” 11” x 11” 8.5 mm Glossy
Please refer to caliber chart for work sizes.Close joints are not recommended.
PERFORMANCE & FEATURES
12”x 22” - 30.5x56 cm 8.5 mm
Wall Tile Specification
PROPERTY ASTM TEST METHOD
Calibrated Rectified LIBERTYWallMinimum Maximum Minimum Maximum
REGULARITYCHARACTERISTICS
Nominal Size
ASTM C499
-2.00% 2.00% -2.00% 2.00% Compliant
Caliber Range (Variation from average facial dimension of sample)
-0.30% or -0.04 in (-1.0 mm) (*)
0.30% or 0.04 in (1.0 mm) (*)
-0.25% or -0.03 in (-0.8 mm) (*)
0.25% or 0.03in (0.8 mm) (*)
Compliant
Thickness (1) N/ARange: 0.031 in (0.79 mm)
N/ARange: 0.031 in (0.79 mm)
Compliant
Wedging ASTM C502 -0.40% or -0.05 in (-1.3 mm) (*)
0.40% or 0.05 in (-1.3 mm) (*)
-0.25% or -0.03 in (-0.8 mm) (*)
0.25% or 0.03 in (0.8 mm) (*)
Compliant
Warpage EdgeASTM C485
-0.30% or -0.04 in (-1.0 mm) (*)
0.40% or 0.05 in (1.3 mm) (*)
-0.30% or -0.04 in (-1.0 mm) (*)
0.40% or 0.05 in (1.3 mm) (*)
Compliant
Warpage Diagonal -0.30% or -0.05 in (-1.3 mm) (*)
0.40% or 0.07 in (1.8 mm) (*)
-0.30% or -0.05 in (-1.3 mm) (*)
0.40% or 0.07 in (1.8 mm) (*)
Compliant
Wall Tiles
STRUCTURAL CHARACTERISTICS
Water Absorption ASTM C373 ≥ 10.0% 10% - 20%
BULK MECHANICAL CHARACTERISTICS
Breaking Strength ASTM C648Average ≥ 125 lbf. (1.11 kN)
Individual ≥ 100 lbf. (0.44 kN)≥ 175 lbf. avg
PHYSICAL PROPERTIES
Bond Strength ASTM C482 ≥ 50 psi (0.34 Mpa) ≥ 100 psi
THERMAL AND IGROMETRIC
CHARACTERISTICS
Crazing Resistance ASTM C424 Pass Resistant
Thermal Shock Resistance ASTM C484 Pass Resistant
CHEMICAL CHARACTERISTICS
Chemical Resistance ASTM C650 As Reported Unaffected
Stain Resistance ASTM C1378 As Reported Unaffected
(*) Whichever is less(1) May not apply to textured surfaces or tiles with uneven back patterns.
31/8”x 123/8” - 8x31.5 cm 8.5 mm
Atla
s Co
ncor
de U
SA |
Mar
ch 2
018
Atlas Concorde reserves the right to modify any product without notice and will not be liable for any direct or indirect damage resulting from such modifications. Colors and optical features of the materials illustrated in this catalogue are to be regarded as mere indications. For information and details relating to codes, packaging and weight it is recommended to refer to the latest pricelist.
© Copyright Atlas Concorde USA, Inc. 2018The reproduction of the work, fully or in part, is strictly forbidden.
V2
While the colors and/or texture present on a single piece of tile will be indicative of the colors and/or texture to be expected on the other tiles, the amount of colors and/or texture on each piece may vary significantly. It is
The Health Product Declaration® logo is a registered trademark of HPD Collaborative.
www.atlasconcordeusa.comATLAS CONCORDE USA, INC. - 117 Seaboard Lane - Suite F170 - Franklin, TN 37067 - USA
COLORED BODY PORCELAIN TILE
FINISH MATTESIZE - THICKNESS 113/4”x 235/8” - 30x60 cm 9 mm
PERFORMANCE & FEATURES
Compliant with standards ANSI A137.1-2012
FIELD TILES - Available in all colors
Commercial size (in) Nominal size (in) Thickness (mm) Finish
12"x24" 11 3/4" x 23 5/8" 9 mm Matte
MOSAICS AND COORDINATING TRIMS - Available in all colors
Commercial size (in) Nominal size (in) Thickness (mm) Finish
Mosaic 2"x2" 11 3/4" x 11 3/4" 9 mm Matte
Brick Mosaic 2”x4” 11 3/4” x 11 3/4” 9 mm Matte
Chevron Mosaic 2”x5” 7 1/2” x 12 3/8” 9mm Matte
Bullnose 3"x24" 2 7/8" x 23 5/8" 9 mm Matte
Cove Base 6"x12" 5 7/8" x 11 3/4" 8.5 mm (*) Matte
Please refer to caliber chart for work sizes.Close joints are not recommended.(*): Cove Base thickness is 7 mm on flat top part.
Porcelain Tile Specification
PROPERTY ASTM TEST METHOD
Calibrated Rectified LIBERTYFloorMinimum Maximum Minimum Maximum
REGULARITYCHARACTERISTICS
Nominal Size
ASTM C499
-3.00% 3.00% -3.00% 2.00% Compliant
Caliber Range (Variation from average facial dimension of sample)
-0.50% or -0.08 in(-2.0 mm) (*)
0.50% or 0.08 in(2.0 mm) (*)
-0.25% or -0.03 in (-0.8 mm) (*)
0.25% or 0.03 in (0.8 mm) (*)
Compliant
Thickness (1) N/A Range: 0.40 in (1.02 mm) N/A Range: 0.40 in (1.02 mm) Compliant
Wedging ASTM C502 -0.50% or -0.08 in(-2.0 mm) (*)
0.50% or 0.08 in(2.0 mm) (*)
-0.25% or -0.03 in (-0.8 mm) (*)
0.25% or 0.03 in(0.8 mm) (*)
Compliant
Warpage EdgeASTM C485
-0.75% or -0.09 in(-2.3 mm) (*)
0.75% or 0.09 in(2.3 mm) (*)
-0.40% or -0.05 in(-1.3 mm)(2) or -1.8 mm(3) (*)
0.40% or 0.05 in(1.3 mm)(2) or 1.8 mm(3) (*)
Compliant
Warpage Diagonal -0.50% or -0.08 in(-2.0 mm) (*)
0.50% or 0.08 in(2.0 mm) (*)
-0.40% or -0.07 in(-1.8 mm) (*)
0.40% or 0.07 in(1.8 mm) (*)
Compliant
All Porcelain Tiles
STRUCTURAL CHARACTERISTICS
Water Absorption ASTM C373 ≤ 0.5% ≤ 0.5%
BULK MECHANICAL CHARACTERISTICS
Breaking Strength ASTM C648Average ≥ 250 lbf. (1.11 kN)
Individual ≥ 225 lbf. (1.00 kN)≥ 350 lbf. avg
PHYSICAL PROPERTIES
Bond Strength ASTM C482 ≥ 50 psi (0.34 Mpa) ≥ 100 psi
THERMAL AND IGROMETRIC
CHARACTERISTICS
Resistance to Freeze/Thaw Cycling ASTM C1026 As Reported Resistant
CHEMICAL CHARACTERISTICS
Chemical Resistance ASTM C650 As Reported Unaffected
Stain Resistance ASTM C1378 As Reported Unaffected
SAFETY CHARACTERISTICS
Dynamic coefficient of friction DCOF Requires a minimum value of 0.42 for commercial areas that are likely to be wet > 0.42 Wet
(*) Whichever is less(1) May not apply to textured surfaces or tiles with uneven back patterns.(2) Whichever is less, for tiles up to 24’’x24’’ (610 mm x 610 mm).(3) Applies to tiles larger than 24’’x24’’ (610 mm x 610 mm).
V2SLIGHT VARIATION
Clearly distinguishable differences in texture and/or pattern within similar colors.
Atla
s Co
ncor
de U
SA |
Mar
ch 2
018
Atlas Concorde reserves the right to modify any product without notice and will not be liable for any direct or indirect damage resulting from such modifications. Colors and optical features of the materials illustrated in this catalogue are to be regarded as mere indications. For information and details relating to codes, packaging and weight it is recommended to refer to the latest pricelist.
© Copyright Atlas Concorde USA, Inc. 2018The reproduction of the work, fully or in part, is strictly forbidden.
top related