LED Work Lamps - Roadvision · 2018-05-02 · Work Lamp LED 10-30V 18W Rect Flood Beam RWL118S Work Lamp LED 10-30V 18W Rect Flood Beam LED Work Lamps SPECIFICATIONS RWL118F RWL118S
Post on 19-Jul-2020
0 Views
Preview:
Transcript
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 42 // roadvision.com.au
ROADVISION’s RWL215 Series compact work lamps offer uncompromised performance and energy efficiency in a compact, easy to install package. The
RWL215 Series include 5W Cree LED’s, available in either flood beam, or spot beam with a specially designed glare shield ideal for mounting on truck mirrors
for additional visibility when reversing. Roadvision’s compact work lamps are perfect for applications where space is limited. Water and dust proof to IP68, the
RWL215 Series feature a super durable light weight diecast housing and polycarbonate lens, allowing for worry free operation in even the toughest conditions.
PART NUMBERS
RWL215FWork Lamp LED 10-30V 15W Square Flood Beam
RWL215SWork Lamp LED 10-30V 15W Square Spot Beam
RWL215SGWork Lamp LED 10-30V 15W Square Spot Beam with Glare Shield
RW
L2
15
SE
RIE
S
FEATURES � RWL215 Series LED work lamps produce 1200lm of instant light
output
� Available in flood or spot with glare shield
� 5W Cree LED’s produce super white light close to daylight
� Multi-volt 10-30V DC input
� Super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing
& polycarbonate lens
� Water & dust proof IP67 rated
� Simple 2 wire installation
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
15W10-30V 1200LUMENS
LED Work Lamps
SPECIFICATIONS
RWL215F RWL215S RWL215SG
Lumens Light Output (Effective)
1200lm 1200lm 1200lm
Power Watts 15W 15W 15W
Lux @ 10m 12 Lux 142 Lux 142 Lux
Input Voltage 10-30V 10-30V 10-30V
Current Draw Amps
0.80A @ 13.8V
DC
0.80A @ 13.8V
DC
0.80A @ 13.8V
DC
Dimensions AxBxC 66x65x120mm 66x65x120mm 66x156x120mm
Wiring300mm
Sheathed Cable
300mm
Sheathed Cable
300mm
Sheathed Cable
SHEATHED300mm
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENSYEARWARRANTYBLISTER
LINE DIAGRAM
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 43
RW
L9
1 S
ER
IES
FEATURES � RWL91 Series LED work lamps produce 1200lm of instant light
output
� Available in flood or spot beams
� 1 x 15W Cree MKR LED produce’s super white light close to
daylight
� Multi-volt 10-30V DC input & super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing & polycarbonate
lens
� Water & dust proof IP67 rated
� Simple 2 wire installation
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
ROADVISION’s RWL91 Series round work lamps offer uncompromised performance and energy efficiency in a compact, easy to install package. The RWL91
Series features 1 x 15W Cree MKR LED and is available in either flood, or spot beam. Roadvision’s compact work lamps are perfect for applications where
space is limited. Water and dust proof to IP67, the RWL91 Series feature a super durable light weight die-cast housing and polycarbonate lens, allowing for
worry free operation in even the toughest conditions.
PART NUMBERS
RWL9115FWork Lamp LED 10-30V 15W Round Flood Beam
RWL9115SWork Lamp LED 10-30V 15W Round Spot Beam
LED Work Lamps
SPECIFICATIONS
RWL9115F RWL9115S
Lumens Light Output (Effective)
1200lm 1200lm
Power Watts 15W 15W
Lux @ 10m 48 Lux 280 Lux
Input Voltage 10-30VDC 10-30VDC
Current Draw Amps 1.1 Amps 1.1 Amps
Dimensions AxBxC 77x90x87mm 77x90x87mm
Wiring 2 Pin Deutsch Plug 2 Pin Deutsch Plug
15W10-30V 1200LUMENS
DEUTSCH2 PIN PLUG
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENS BLISTER
LINE DIAGRAM
YEARWARRANTY
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 44 // roadvision.com.au
RW
L9
2 S
ER
IES
ROADVISION’s RWL92 Series oval work lamps offer uncompromised performance and energy efficiency in a compact, easy to install package. The RWL92
Series features 2 x 10W Cree XML LED’s and is available in either flood, or spot beam. Roadvision’s compact work lamps are perfect for applications where
space is limited. Water and dust proof to IP67, the RWL92 Series feature a super durable light weight die-cast housing and polycarbonate lens, allowing for
worry free operation in even the toughest conditions.
PART NUMBERS
RWL9220FWork Lamp LED 10-30V 20W Round Flood Beam
RWL9220SWork Lamp LED 10-30V 20W Round Spot Beam
FEATURES � RWL92 Series LED work lamps produce 1600lm of instant light
output
� Available in flood or spot beams
� 2 x 10W Cree XML LED’s produce super white light close to
daylight
� Multi-volt 10-30V DC input & super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing & polycarbonate
lens
� Water & dust proof IP67 rated
� Simple 2 wire installation
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
20W10-30V 1600LUMENS
LED Work Lamps
SPECIFICATIONS
RWL9220F RWL9220S
Lumens Light Output (Effective)
1600lm 1600lm
Power Watts 20W 20W
Lux @ 10m 58 Lux 396 Lux
Input Voltage 10-30V 10-30V
Current Draw Amps
1.5A @ 13.8V DC 1.5A @ 13.8V DC
Dimensions AxBxC 98x75x77mm 98x75x77mm
Wiring 2 Pin Deutsch Plug 2 Pin Deutsch Plug
DEUTSCH2 PIN PLUG
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENSYEARWARRANTYBLISTER
LINE DIAGRAM
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 45
Cleverly designed low profile mounting bracket
RW
L1
18
SE
RIE
S
FEATURES � RWL118 Series LED work lamps produce 1080lm of instant light
output
� Available in flood or spot beam
� 3W Epistar LED’s produce super white light close to daylight
� Multi-volt 10-30V DC input
� Super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing
& polycarbonate lens
� Water & dust proof IP67 rated
� Simple 2 wire installation
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
Available in either spot or flood beam, ROADVISION’s RWL Series work lights suit the most demanding work environments. Water and dust proof to IP68,
the RWL118 Series feature a super durable light weight diecast housing and polycarbonate lens, allowing for worry free operation in Australia’s toughest
conditions. Complete with a cleverly designed low profile mounting bracket and simple two wire installation, the RWL118 Series provide a high quality, low fuss
solution to your lighting requirements.
PART NUMBERS
RWL118FWork Lamp LED 10-30V 18W Rect Flood Beam
RWL118SWork Lamp LED 10-30V 18W Rect Flood Beam
LED Work Lamps
SPECIFICATIONS
RWL118F RWL118S
Lumens Light Output (Effective) 1080lm 1080lm
Power Watts 18W 18W
Lux @ 10m 10 Lux 55 Lux
Input Voltage 10-30V 10-30V
Current Draw Amps 1.4A @ 13.8V DC 1.4A @ 13.8V DC
Dimensions AxBxC 159.8x63x45.2mm 159.8x63x45.2mm
Wiring 300mm Sheathed Cable 300mm Sheathed Cable
18W10-30V 1080LUMENS
SHEATHED300mm
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENSYEARWARRANTYBLISTER
LINE DIAGRAM
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 46 // roadvision.com.au
ROADVISION’s RWL34/36 Series square work lamps offer uncompromised performance and energy efficiency in a compact, easy to install package. The
RWL34/36 Series are designed to match the perfect LED and beam patterns, resulting in longer spot beam penetration utilizing 3W Hi-Lux Osram LED’s and
higher lux wider angle flood beams with 5W Cree LED’s. Available in 4 or 6 LED configurations, they deliver the perfect light beam patterns for any application.
Water and dust proof to IP67, the RWL34/36 Series feature a super durable light weight diecast housing and polycarbonate lens, allowing for worry free
operation in even the toughest conditions.
PART NUMBERS
RWL3412SWork Lamp LED 10-30V 12W Square Spot Beam
RWL3420FWork Lamp LED 10-30V 20W Square Flood Beam
RWL3618SWork Lamp LED 10-30V 18W Square Spot Beam
RWL3630FWork Lamp LED 10-30V 30W Square Flood Beam
FEATURES � RWL34/36 Series LED work lamps produce up to 2400lm of
instant light output
� Available in 4 or 6 LED flood or spot beams
� 3W Osram Hi-Lux spot or 5W Cree flood LED’s
� Multi-volt 10-30V DC input & super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing & polycarbonate lens
� Water & dust proof IP67 rated
� Simple 2 wire installation
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
12-30W10-30V 960-2400LUMENS
LED Work Lamps
DEUTSCH2 PIN PLUG
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENSYEARWARRANTYBLISTER
RW
L3
4/3
6 S
ER
IES
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 47
SPECIFICATIONS
RWL3412S RWL3420F RWL3618S RWL3630F
Lumens Light Output (Effective) 960lm 1600lm 1440lm 2400lm
Power Watts 12W 20W 18W 30W
Lux @ 10m 380 Lux 42 Lux 416 Lux 44 Lux
Input Voltage 10-30VDC 10-30VDC 10-30VDC 10-30VDC
Current Draw Amps 0.9 Amps 1.5 Amps 1.4 Amps 2.2 Amps
Dimensions AxBxC 81x76x85mm 81x76x85mm 81x76x85mm 81x76x85mm
Wiring 2 Pin Deutsch Plug 2 Pin Deutsch Plug 2 Pin Deutsch Plug 2 Pin Deutsch Plug
LINE DIAGRAM - 3400 SERIES LINE DIAGRAM - 3600 SERIES
RW
L3
4/3
6 S
ER
IES
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 48 // roadvision.com.au
ROADVISION’s RWL95 Series round work lamps offer uncompromised performance and energy efficiency in a compact, easy to install package. The RWL95
Series include 6 x 3W Osram Hi-Lux LED’s, available in either flood, or spot beam they are also ADR approved as a supplementary reverse lamp. Roadvision’s
compact work lamps are perfect for applications where space is limited. Water and dust proof to IP67, the RWL95 Series feature a super durable light weight
die-cast housing and polycarbonate lens, allowing for worry free operation in even the toughest conditions.
PART NUMBERS
RWL9518SWork Lamp LED 10-30V 18W Round Spot Beam
RWL9518FWork Lamp LED 10-30V 18W Round Flood Beam
FEATURES � RWL95 Series LED work lamps produce 1500lm of instant light
output
� Available in flood or spot beams
� 6 x 3W Osram Hi-Lux LED’s produce super white light close to
daylight
� Multi-volt 10-30V DC input & super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing & polycarbonate
lens * Water & dust proof IP67 rated
� Simple 2 wire installation
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
� ADR approved as supplementary reverse lamp
18W10-30V 1500LUMENS
LED Work Lamps
SPECIFICATIONS
RWL9518S RWL9518F
Lumens Light Output (Effective)
1500lm 1500lm
Power Watts 18W 18W
Lux @ 10m 185 Lux 115 Lux
Input Voltage 10-30VDC 10-30VDC
Current Draw Amps
1.4 Amps 1.4 Amps
Dimensions AxBxC 89x58x89mm 89x58x89mm
Wiring 2 Pin Deutsch Plug 2 Pin Deutsch Plug
Approvals Reverse Lamp E9-R23 Reverse Lamp E9-R23
DEUTSCH2 PIN PLUG
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENSYEARWARRANTYBLISTER
LINE DIAGRAM
RW
L9
5 S
ER
IES
r o a d v i s i o n . c o m . a u
B E C A U S E Y O U W O R K
NIGHT & DAY
rwLWORK LAMPSS E R I E S
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 50 // roadvision.com.au
RW
L4
00
SE
RIE
S
ROADVISION’s Series of LED work lights provide high performance in a durable package designed for Australia’s toughest environments. With multi voltage
input, a super durable light weight diecast housing and polycarbonate lens, Roadvision’s work lights are suitable for any application. Packing a punch for those
on a budget, the RWL400 Series square work lamps feature 3W or 10W economical Epistar LED’s delivering the biggest bang for your buck.
PART NUMBERS
RWL427SFWork Lamp LED 10-30V 27W Square Flood Beam
RWL440FWork Lamp LED 10-30V 40W Square Flood Beam
FEATURES � RWL400 Series square LED work lamps produce up to 3600lm
of instant light output
� Available in 27W or 40W models
� 3W or 10W Epistar LED’s produce super white light close
to daylight
� Multi-volt 10-30V DC input
� Super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing & polycarbonate lens
� Water & dust proof IP67 rated
� Simple 2 wire installation
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
LED Work Lamps
27-40W10-30V 1620-3600LUMENS
SHEATHED300mm
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENSYEARWARRANTYBLISTER
SPECIFICATIONS
RWL427SF RWL440F
Lumens Light Output (Effective) 1620lm 3600lm
Power Watts 27W 40W
Lux @ 10m 11 Lux 46.5 Lux
Input Voltage 10-30V 10-30V
Current Draw Amps 2.1A @ 13.8V DC 3.0A @ 13.8V DC
Dimensions AxBxC 66x65x120mm 110x72x128mm
Wiring 300mm Sheathed Cable 300mm Sheathed Cable
LINE DIAGRAM
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 51
ROADVISION’s Series of LED work lights provide high performance in a durable package designed for Australia’s toughest environments. With multi-voltage
input and a slimline design, Roadvision’s LED work lights allow easy installation for any application. Packing a punch for those on a budget, the RWL400 Series
round work lamps feature 3W economical Epistar LED’s delivering the biggest bang for your buck.
PART NUMBERS
RWL418FWork Lamp LED 10-30V 18W Round Flood Beam
RWL427RFWork Lamp LED 10-30V 27W Round Flood Beam
FEATURES � RWL400 Series round LED work lamps produce up to 1620lm of
instant light output
� Available in 18W or 27W models
� 3W Epistar LED’s produce super white light close to daylight
� Multi-volt 10-30V DC input
� Super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing & polycarbonate lens
� Water & dust proof IP67 rated
� Simple 2 wire installation
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
LED Work Lamps
RW
L4
00
SE
RIE
S
18-27W10-30V 1080-1620LUMENS
SHEATHED300mm
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENSYEARWARRANTYBLISTER
SPECIFICATIONS
RWL418F RWL427RF
Lumens Light Output (Effective) 1080lm 1620lm
Power Watts 18W 27W
Lux @ 10m 12.5 Lux 26 Lux
Input Voltage 10-30V 10-30V
Current Draw Amps 1.4A @ 13.8V DC 1.4A @ 13.8V DC
Dimensions AxBxC 116x48x128mm 110x55x128mm
Wiring 300mm Sheathed Cable 300mm Sheathed Cable
LINE DIAGRAM
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 52 // roadvision.com.au
The Roadvision RWL636 LED work light allows for total control right from the light source. Featuring an in built switch on the rear of the lamp and a handle,
you can take total control of when and where you need light the most. Producing 2880lm of light and housed in a tough die-cast aluminium housing with
polycarbonate lens, the RWL636 Series is a durable and flexible work light perfect for tradies and utility applications.
PART NUMBERS
RWL636FHSWork Lamp LED 10-30V 36W Round Flood Beam with Handle & Switch
RW
L6
36
SE
RIE
S
FEATURES � RWL636 Series LED work lamps produce 2880lm of instant light
output
� Integrated handle & switch
� 3W Cree LED’s produce super white light close to daylight
� Multi-volt 10-30V DC input
� Super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing & polycarbonate
lens
� Water & dust proof IP67 rated
� Simple 2 wire installation
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
LED Work Lamps
36W10-30V 2880LUMENS
SHEATHED300mm
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENSYEARWARRANTYRETAIL
SPECIFICATIONS
RWL636FHS
Lumens Light Output (Effective) 2880lm
Power Watts 36W
Lux @ 10m 26 Lux
Input Voltage 10-30V
Current Draw Amps 1.34A @ 13.8V DC
Dimensions AxBxC 145x94x200mm
Wiring 300mm Sheathed Cable
LINE DIAGRAM
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 53
RW
L8
14
SE
RIE
S
Roadvision’s RWL814 Series LED work lamps are feature packed and one of the most versatile lamps in the range. Utilising high performing 1.5W Osram LED’s
packaged in an IP67 rated housing and shielded behind a polycarbonate lens, the RWL814 Series provide high performance in compact yet durable package.
With an integrated handle, switch and DT connector, the RWL814 Series work lamps are fully adjustable, allowing you to take full control of where and when
you need the light.
PART NUMBERS
RWL814FHSWork Lamp LED 10-30V 13.5W Square Flood Beam with Handle & Switch
FEATURES � RWL814 Series LED work lamps produce 1210lm of instant light
output
� Integrated handle, switch & DT connector
� 1.5W Osram LED’s produce super white light close to daylight
� Multi-volt 10-30V DC input
� Super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing & polycarbonate
lens
� Water & dust proof IP67 rated
� Simple 2 wire installation with integrated Deutsch plug
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
LED Work Lamps
SPECIFICATIONS
RWL814FHS
Lumens Light Output (Effective) 1210lm
Power Watts 13.5W
Lux @ 10m 35 Lux
Input Voltage 10-30V
Current Draw Amps 1.2A @ 13.8V DC
Dimensions AxBxC 100x185x57mm
Wiring Integrated 2 Pin Deutsch Plug
100mm
184.5mm
128.8mm
57mm40mm
LINE DIAGRAM
13.5W10-30V 1210LUMENS
DEUTSCH2 PIN PLUG
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENSYEARWARRANTYBLISTER
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 54 // roadvision.com.au
BW
L S
ER
IES
LED Work Lamps
FEATURES � BWL Series bar work lamps available in 6” to 10” lengths
� 9-32 volt input & low current draw
� 50,000 hour LED life span with solid state technology
� Tough die cast aluminium housing and polycarbonate lens
� Water and dust proof IP68 rated (submersible to 3m)
� Vibration resistant with rubber shock isolators
� Stainless steel mounting bracket & hardware
� Weatherproof Deutsch plug
� Easy 2 wire installation
9-32V DEUTSCH2 PIN PLUG
ALALUMINIUM
HOUSINGIP68
SUBMERSIBLEPOLYCARBONATE
LENS
ROADVISION’s BWL LED bar work lamps are a proven performer. With unbreakable polycarbonate lenses and an extremely tough die cast aluminium housing, these
lamps can handle anything that you and the environment throw at them. So good even NASA are using them on their prototype Moonrover-Chariot. With flood beam
patterns, various extrusion lengths, water and dust proof to IP68 and drawing a fraction of the current of HID and halogen lamps, the choice is simple!
PART NUMBERS
BWL08FPWork Lamp LED 9-32V 24W 153mm Rect Flood Beam Bar Type
BWL12FPWork Lamp LED 9-32V 36W 229mm Rect Flood Beam Bar Type
SPECIFICATIONS
BWL08FP BWL12FP
Lumens Light Output (Effective) 1440lm 2160lm
Power Watts 24W 36W
Current Draw Amps 2A @ 12V 3A @ 12V
Dimensions 153x78x75mm 229x78x75mm
Mounting Depth 58mm 58mm
Wiring 2 Pin Deutsch Plug 2 Pin Deutsch Plug
Weight 1.2kg 1.5kg
YEARWARRANTY
1440-2160LUMENS 24-36W OEM
r o a d v i s i o n . c o m . a u
DWL MINING WORK LAMPSA PROVEN PERFORMER IN THE WORLDS TOUGHEST CONDIT IONS
I N T H E T O U G H E S T C O N D I T I O N S
WE THRIVE
77.47mm
74.9
3mm
LINE DIAGRAM
r o a d v i s i o n . c o m . a u
DWL MINING WORK LAMPSA PROVEN PERFORMER IN THE WORLDS TOUGHEST CONDIT IONS
I N T H E T O U G H E S T C O N D I T I O N S
WE THRIVE
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 56 // roadvision.com.au
DW
L S
ER
IES
LED Work Lamps
FEATURES � DWL Series lights produce more light output than HID xenon
lamps
� 9-32 volt input & low current draw
� 50,000 hour LED life span with solid state technology
� Tough die cast aluminium housing and polycarbonate lens
� Water and dust proof IP68 rated (submersible to 3m)
� Vibration resistant with rubber shock isolators
� Stainless steel mounting bracket & hardware
� Weatherproof Deutsch plug
� Easy 2 wire installation
9-32V DEUTSCH2 PIN PLUG
ALALUMINIUM
HOUSINGIP68
SUBMERSIBLEPOLYCARBONATE
LENS
Roadvision’s DWL Series work lamps have been a proven performer for years in the harshest environments, just when you thought it couldn’t get any better,
Roadvision have redesigned this popular series with the optional added benefit of dual control circuitry. Roadvision’s DWL High-Low Series is now a truly
diverse work lamp that can even be used as a High-Low beam head lamp. Both circuits operate independently utilising the high beam spot LED’s and low beam
flood LED’s ensuring operators have control to achieve the most efficient use of light in all conditions. With virtually unbreakable polycarbonate lenses and an
extremely tough die-cast aluminium housing, these lamps can handle anything that you and the environment can throw at them. Standard with mixed flood &
spot beam patterns, water & dust proof to IP68, submersible to 3 metres and drawing a fraction of the current of HID & halogen lamps, so good even NASA are
using them on their prototype Moonrover-Chariot. The choice is simple!
PART NUMBERS
DWL16PWork Lamp LED 9-32V 48W 153mm Rect Mixed Flood/Spot Beam
DWL16PFWork Lamp LED 9-32V 48W 153mm Rect Flood Beam
DWL24PWork Lamp LED 9-32V 72W 229mm Rect Mixed Flood/Spot Beam
DWL16PHLHead Lamp LED High/Low Beam
YEARWARRANTY
2880-4320LUMENS 48-72W OEM YEAR
WARRANTY
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 57
DW
L S
ER
IES
SPECIFICATIONS
DWL16 DWL24 DWL16PHL
Lumens Light Output (Effective) 2880lm 4320lm 2880lm
Power Watts 48W 72W 48W
Current Draw Amps 4A @ 12V 6A @ 12V 4A @ 12V
Dimensions 153x78x127mm 229x78x127mm 153x78x127mm
Mounting Depth 58mm 58mm 58mm
Wiring 2 Pin Deutsch Plug 2 Pin Deutsch Plug 2 x 2 Pin Deutsch Plug
Weight 1.4kg 1.9kg 1.4kg
DWL HL MODELS DELIVER OPTIMUM LIGHT CONTROLRoadvision’s DWL High-Low Series is now a truly diverse work lamp that can even be used as a High-Low beam head lamp. Designed with 2 separate 2 pin Deutsch plugs, it’s 2 circuits can be illuminated independently (high beam spot LED’s or low beam flood LED’s) or together by powering both circuits, ensuring operators have control to achieve the most efficient use of light in all conditions.
Spot Beam(High Beam)
Flood Beam(Low Beam)
77.47mm
127m
m
LINE DIAGRAM
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 58 // roadvision.com.au
RW
L5
00
SE
RIE
S
ROADVISION’s RWL500 Series heavy duty LED work lamps are available in 30W or 90W models. Featuring high performance 5W or 10W Cree LED’s and
a unique heavy duty shock absorbing mounting system on the 90W model, they are designed to withstand the vibration and harshness of Australia’s
toughest environments.
PART NUMBERS
RWL530FWork Lamp Heavy Duty LED 10-30V 30W Square Flood Beam
RWL590SWork Lamp Heavy Duty LED 10-30V 90W Square Spot Beam
RWL590FWork Lamp Heavy Duty LED 10-30V 90W Square Flood Beam
FEATURES � RWL500 Series heavy duty LED work lamps produce up to 7200lm
of instant light output
� Available in 30W or 90W models
� 5W or 10W Cree LED’s produce super white light close to daylight
� Multi-volt 10-30V DC input
� Super low current draw
� 50,000 hour LED lifespan with solid state technology
� Light weight tough die-cast aluminium housing & polycarbonate lens
� Water & dust proof IP67 rated
� Simple 2 wire installation with Deutsch plug
� Over/under voltage, reverse polarity protection & EMI/EMC radio
interference approved
� Heavy duty shock absorbing mounting system on RWL590F
LED Work Lamps
LINE DIAGRAM
30-90W10-30V 2700-7200LUMENS
DEUTSCH2 PIN PLUG
ALALUMINIUM
HOUSINGIP67
WATERPROOFPOLYCARBONATE
LENSYEARWARRANTYRETAIL
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 59
RWL530F RWL590F
SPECIFICATIONS
RWL530F RWL590S RWL590F
Lumens Light Output (Effective) 2700lm 7200lm 7200lm
Power Watts 30W 90W 90W
Lux @ 10m 5 Lux 480 Lux 35 Lux
Input Voltage 10-30V 10-30V 10-30V
Current Draw Amps 2.2A @ 13.8V DC 6.37A @ 13.8V DC 6.37A @ 13.8V DC
Dimensions AxBxC 100x82x128mm 135x124x150mm 135x124x150mm
Wiring 2 Pin Deutsch Plug 2 Pin Deutsch Plug 2 Pin Deutsch Plug
RW
L5
00
SE
RIE
S
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 60 // roadvision.com.au
LED Interior / Utility Lamps
FEATURES � LED strip lighting range suitable for interior or exterior
applications
� Multi-volt 10-30V DC Input
� High performance light output up to 720lm
� Super low current draw of 0.13 to 0.65 amps @ 13.8V
� 100,000 hour rated LED life span with solid state technology
� Light weight durable aluminium housing
� Water and dust proof IP67 rated
� Integrated On/Off switch
� Surface mount with screw caps
� Shallow mounting depth for easy installation
� Supplied pre-wired
� Simple 2 wire hook-up
2-9W SHEATHED500mm
ALALUMINIUM
HOUSINGIP67
WATERPROOF
ROADVISION’s next generation ISLS Series LED interior/exterior strip lamps are the perfect solution for tight spaces... Versatile, super bright & energy efficient!
Roadvision’s new ISLS Series interior/exterior strip lamps are a versatile solution for tight areas like step, under cabinet, toolbox or under hood lighting. Cleverly
engineered with a surface mount design and available in 4 lengths ranging from 180mm to 590mm, multi-voltage 10-30V input and integrated switch, there
is an ISLS lamp suitable for any application. The ISLS’s entire lamp body is a shallow 13mm thick and with an IP rating of IP67, they are totally dust and
water proof and are suitable for interior or exterior fitment in the most extreme applications. Engineered with high performance LED’s the ISLS Series delivers
optimum performance and energy efficiency. See the light with ROADVISION’s ISLS Series interior/exterior lamps!
PART NUMBERS
ISLS180MVInterior Lamp LED 10-30V 2W Strip Lamp 180mm With Switch
ISLS290MVInterior Lamp LED 10-30V 4W Strip Lamp 290mm With Switch
ISLS440MVInterior Lamp LED 10-30V 6W Strip Lamp 440mm With Switch
ISLS590MVInterior Lamp LED 10-30V 9W Strip Lamp 590mm With Switch
YEARWARRANTY10-30V 144-720
LUMENS BLISTER
ISL
S S
ER
IES
SIMPLE SURFACE MOUNT DESIGNISLS Series shown with clips removed
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 61
SPECIFICATIONS
ISLS180MV ISLS290MV ISLS440MV ISLS590MV
Lumens Light Output (Effective) 144lm 288lm 504lm 720lm
Light Source 24 White LED’s 48 White LED’s 84 White LED’s 120 White LED’s
Power Watts 2W 4W 7W 9W
Current Draw Amps 0.13A @ 13.8V 0.26A @ 13.8V 0.46A @ 13.8V 0.65A @ 13.8V
Dimensions 180x32x13mm 290x32x13mm 440x32x13mm 590x32x13mm
Mounting Holes 166mm Centres 276mm Centres 426mm Centres 576mm Centres
Wiring 500mm Sheathed 500mm Sheathed 500mm Sheathed 500mm Sheathed
Weight 37g 59g 90g 120g
LINE DIAGRAM
ISLS180MV
ISLS590MV
ISLS440MV
ISLS290MV
TLCM30 Trailer Lamp Timer Module 30 Minute
TLCM60 Trailer Lamp Timer Module 60 Minute
TLCM180 Trailer Lamp Timer Module 180 Minute
RVLF40312 LED Flasher Module (3 Amp Max)
SPARE PARTS & ACCESSORIES
ISL
S S
ER
IES
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 62 // roadvision.com.au
M3
59
SE
RIE
S
LED Interior / Utility Lamps
FEATURES � Peterson’s cove lamps available in 6” or 12” models
� Suitable for interior or exterior applications
� Multi-volt 9-32V DC input & low current draw
� 3 or 6 white LED’s producing up to 400 lumens of light output
� Super low current draw of 0.3 amps @ 13.8V DC
� Diffused optics for even, round light distribution
� 100,000 hour LED lifespan with solid state technology
� Waterproof
� Special corner or cove mount design projects light at a
45° angle
PETGLENS2.25W PRE-WIRED
150mmWEATHER
PROOF
Peterson’s M359 Series interior cove lamps are an innovative, slim line high output lighting solution… Peterson’s M359 Series LED interior cove lamps are
an innovative design featuring a special corner mount design, allowing them to be fitted into 90° corners whilst projecting the light at a 45° angle. An ideal
solution for corner or cove mount interior lighting applications, the M359 Series is available in 6” or 12” lengths and offers a super-efficient 2.25W of high
intensity white LED power producing up to 400lm of light output. The corner or cove mounted design eliminates damage from forklifts or cargo and features a
rugged PETG lens incorporated with diffused optics for even round light distribution. Multi-volt, water and dust proof and manufactured to Peterson’s standards,
the M359 Series interior lamps are built to last a lifetime*.
PART NUMBERS
M359-1Interior/Exterior Cove Lamp LED 9-32V 2.25W 6” 200mm Corner Cove Lamp
M359-2Interior/Exterior Cove Lamp LED 9-32V 2.25W 12” 355mm Corner Cove Lamp
SPECIFICATIONS
M359-1 M359-2
Lumens Light Output (Effective) 300lm 400lm
Light Source 3 White LED’s 6 White LED’s
Power Watts 2.25W 2.25W
Current Draw Amps 0.3A @ 13.8V DC 0.3A @ 13.8V DC
Dimensions 200x30x30mm 355x30x30mm
Mounting Holes 175mm Centres 330mm Centres
Wiring 150mm Pre-Wired 150mm Pre-Wired
Weight 50g 100g
LIFETIMEWARRANTY9-32V OEM300-400
LUMENS
*Lifetime based on 100,000 hour LED lifespan
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 63
M3
59
SE
RIE
S
LINE DIAGRAM
TLCM30 Trailer Lamp Timer Module 30 Minute
TLCM60 Trailer Lamp Timer Module 60 Minute
TLCM180 Trailer Lamp Timer Module 180 Minute
SPARE PARTS & ACCESSORIES
INNOVATIVE CORNER MOUNT DESIGNPeterson’s M359 Series interior corner or “cove” lamps feature an innovative 90º mounting bracket allowing them to fit snuggly into corner applications. The advantages of this clever design ensures the lamps are less susceptible to damage from forklifts or cargo but most importantly projects the light where you need it most. This 45º focused light projection illuminates the area over the full 90º’s ensuring the area is illuminated where you need it most. 45º
M359-1
M359-2
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 64 // roadvision.com.au
LED Interior / Utility Lamps
FEATURES � Recess mount interior lamp range
� 12 volt DC input
� Super low current draw of 0.1 amps @ 13.8V DC
� 100,000 hour LED life span with solid state technology
� Light weight high impact ABS housing and polycarbonate lens
� Supplied pre-wired
� Recess mount allows flush mount fitment
� Available in white or chrome versions
POLYCARBONATELENS BLISTER2W PRE-WIRED
350mm
ABSHIGH IMPACTHOUSING
WEATHERRESISTANT
ROADVISION’s IL70 Series recessed interior lamps are super bright, energy efficient and built to last a lifetime*. Perfect for down light applications, Roadvision’s
IL70 Series interior lamps feature 24 super bright white LED’s and are available with either a white or chrome bezel. Utilizing a recessed mount design, the IL70
Series only protrudes 10mm from the mounting surface. The mounting screws are cleverly hidden beneath the screw on bezel resulting in an attractive flush
mount appearance. Featuring a 70mm diameter bezel, 12V input, simple 2 wire connection, high impact ABS housing and polycarbonate lens, the IL70 Series
are built to last a lifetime*. See the light with ROADVISION’s IL70 Series.
PART NUMBERS
IL70Interior/Exterior Lamp LED 12V 2W Round 70mm Recessed Mount White Bezel
IL70CInterior/Exterior Lamp LED 12V 2W Round 70mm Recessed Mount Chrome Bezel
SPECIFICATIONS
IL70
Lumens Light Output (Effective) 120lm
Light Source 24 White LED’s
Power Watts 2W
Current Draw Amps 0.1A @ 13.8V DC
Dimensions 70 x 18mm
Mounting Holes 3 Hole Mount on 59.9mm Radii
Wiring 350mm Pre-Wired
Weight 35g
YEARWARRANTY12V 120
LUMENS
LINE DIAGRAM
TLCM30 Trailer Lamp Timer Module 30 Minute
TLCM60 Trailer Lamp Timer Module 60 Minute
TLCM180 Trailer Lamp Timer Module 180 Minute
SPARE PARTS & ACCESSORIES
*Lifetime based on 100,000 hour LED lifespan
IL7
0 S
ER
IES
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 65
LED Interior / Utility Lamps
FEATURES � Recess mount interior lamp range
� 12 volt DC input
� Super low current draw of 0.1 amps @ 13.8V DC
� 100,000 hour LED life span with solid state technology
� Light weight high impact ABS housing and polycarbonate lens
� Supplied pre-wired
� Recess mount allows flush mount fitment
� Available in white or chrome versions
POLYCARBONATELENS BLISTER2W PRE-WIRED
350mm
ABSHIGH IMPACTHOUSING
WEATHERRESISTANT
ROADVISION’s IL100 Series recessed interior lamps are super bright, energy efficient and built to last a lifetime*. Perfect for down light applications,
Roadvision’s IL100 Series interior lamps feature 30 super bright white LED’s and are available with either a white or chrome bezel. Utilizing a recessed mount
design, the IL100 Series only protrudes 12mm from the mounting surface. The 4 mounting screws are cleverly hidden beneath the screw on bezel resulting in
an attractive flush mount appearance. Featuring a 100mm diameter bezel, 12V input, simple 2 wire connection, high impact ABS housing and polycarbonate
lens, the IL100 Series are built to last a lifetime*. See the light with ROADVISION’s IL100 Series.
PART NUMBERS
IL100Interior/Exterior Lamp LED 12V 2W Round 100mm Recessed Mount White Bezel
IL100CInterior/Exterior Lamp LED 12V 2W Round 100mm Recessed Mount Chrome Bezel
SPECIFICATIONS
IL100
Lumens Light Output (Effective) 150lm
Light Source 30 White LED’s
Power Watts 2W
Current Draw Amps 0.1A @ 13.8V DC
Dimensions 100x24mm
Mounting Holes 4 Hole Mount 90mm Centres
Wiring 350mm Pre-Wired
Weight 60g
YEARWARRANTY12V 150
LUMENS
LINE DIAGRAM
TLCM30 Trailer Lamp Timer Module 30 Minute
TLCM60 Trailer Lamp Timer Module 60 Minute
TLCM180 Trailer Lamp Timer Module 180 Minute
SPARE PARTS & ACCESSORIES
*Lifetime based on 100,000 hour LED lifespan
IL1
00
SE
RIE
S
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 66 // roadvision.com.au
LED Interior / Utility Lamps
FEATURES � Awning mount interior/exterior lamp range
� 12 volt DC input
� Super low current draw of 0.2 amps @ 13.8V DC
� 100,000 hour LED life span with solid state technology
� Light weight high impact ABS housing and polycarbonate lens
� Supplied pre-wired
� 20° angled awning bracket
POLYCARBONATELENS BLISTER4.3W PRE-WIRED
200mm
ABSHIGH IMPACTHOUSING
WEATHERPROOF
ROADVISION’s IL180 Series interior/exterior awning lamps deliver light where you need it. Roadvision’s IL180 Series awning lamps feature 18 super bright
white LED’s producing 300lm light output. Designed cleverly with a 20 degree angled mounting bracket, the IL180 Series can be easily surface mounted over
doors or on flat interior or exterior surfaces delivering light where you need it most. With 12V input, simple 2 wire connection, high impact ABS housing and
polycarbonate lens, the IL180 Series are built to last a lifetime*. See the light with ROADVISION’s IL180 Series.
PART NUMBERS
IL180Interior/Exterior Lamp LED 12V 4.3W Rectangular 180x90mm Awning Mount
SPECIFICATIONS
IL180
Lumens Light Output (Effective) 300lm
Light Source 18 White LED’s
Power Watts 4.3W
Current Draw Amps 0.2A @ 13.8V DC
Dimensions 180x90x50mm
Mounting Holes 145mm Centres
Wiring 200mm Pre-Wired
Weight 160g
YEARWARRANTY12V 300
LUMENS
LINE DIAGRAM
TLCM30 Trailer Lamp Timer Module 30 Minute
TLCM60 Trailer Lamp Timer Module 60 Minute
TLCM180 Trailer Lamp Timer Module 180 Minute
SPARE PARTS & ACCESSORIES
*Lifetime based on 100,000 hour LED lifespan
IL1
80
SE
RIE
S
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 67
LED Interior / Utility Lamps
FEATURES � Three function High/Med/Low interior lamp with touch sensor
switch
� 12 volt DC input
� Super low current draw of 0.2 amps @ 13.8V DC
� 100,000 hour LED life span with solid state technology
� Light weight high impact ABS housing and polycarbonate lens
� Supplied with integral On/Off touch switch
� Touch switch part of lens, no visible switch
� Supplied pre-wired
� Surface mount allows greater ease of fitment
POLYCARBONATELENS BLISTER4.5W PRE-WIRED
250mm
ABSHIGH IMPACTHOUSING
WEATHERRESISTANT
ROADVISION’s latest release is the IL250 Series LED interior lamps, a rectangular version of the popular IL140 Series. More sophisticated than the rest, the
IL250 series has a cleverly designed touch sensor switch incorporated into the lens. With no visible signs of a switch, it provides a sleek attractive appearance
whilst still offering direct operation at the light. Not only is it a touch sensor switch, it’s also a 3 function dimmer, full output, 60% output or 30% output allows
total control of your lighting needs. Also featuring 12V input, super low current draw, high impact ABS housing and polycarbonate lens, the IL250 Series has
everything you need. With an easy fit surface mount design and with no replacement parts or globes, these lamps are built to last a lifetime*. See the light with
ROADVISION’s IL250 Series interior lamps!
PART NUMBERS
IL250SInterior/Exterior Lamp LED 10-30V 4.5W Rectangular 176x50mm Touch Sensor High/Med/Low/Off White
SPECIFICATIONS
IL250S
Lumens Light Output (Effective) 240lm
Light Source 12 White LED’s
Power Watts 4.5W
Current Draw Amps 0.2A @ 13.8V DC
Dimensions 176x50x13mm
Mounting Holes 152mm Centres
Wiring 250mm Pre-Wired
Weight 65g
YEARWARRANTY12V 240
LUMENS
LINE DIAGRAM
TLCM30 Trailer Lamp Timer Module 30 Minute
TLCM60 Trailer Lamp Timer Module 60 Minute
TLCM180 Trailer Lamp Timer Module 180 Minute
SPARE PARTS & ACCESSORIES
*Lifetime based on 100,000 hour LED lifespan
IL2
50
SE
RIE
S
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 68 // roadvision.com.au
IL1
40
SE
RIE
S
LED Interior / Utility Lamps
FEATURES � Three function High/Med/Low interior lamp with touch sensor
switch
� 12 volt DC input
� Super low current draw of 0.2 amps @ 13.8V DC
� 100,000 hour LED life span with solid state technology
� Light weight high impact ABS housing and polycarbonate lens
� Supplied with integral On/Off touch switch
� Touch switch part of lens, no visible switch
� Supplied pre-wired
� Surface mount allows greater ease of fitment
POLYCARBONATEHOUSING4.5W PRE-WIRED
250mm
ABSHIGH IMPACTHOUSING
WEATHERRESISTANT
ROADVISION’s latest release is the IL140 Series LED interior lamps. More sophisticated than the rest, the IL140 Series has a cleverly designed touch sensor
switch incorporated into the lens. With no visible signs of a switch, it provides a sleek attractive appearance whilst still offering direct operation at the light. Not
only is it a touch sensor switch, it’s also a 3 function dimmer, full output, 60% output or 30% output allows total control of your lighting needs. Also featuring
multi-voltage input, super low current draw, high impact ABS housings and polycarbonate lenses, the IL140 Series has everything you need. With an easy fit
surface mount design and with no replacement parts or globes, these lamps are built to last a lifetime*. See the light with ROADVISION’s IL140 Series interior
lamps!
PART NUMBERS
IL140SInterior/Exterior Lamp LED 12V 4.5W Round 140mm Touch Sensor High/Med/Low/Off
IL140SCInterior/Exterior Lamp LED 12V 4.5W Round 140mm Touch Sensor High/Med/Low/Off Chrome
YEARWARRANTY12V 240
LUMENS BLISTER
SPECIFICATIONS
IL140S
Lumens Light Output (Effective) 240lm
Light Source 15 White LED’s
Power Watts 4.5W
Current Draw Amps 0.2A @ 13.8V DC
Dimensions 140x22mm
Mounting Holes 3 Hole Mount on 128mm Radii
Wiring 250mm Pre-Wired
Weight 100g
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 69
IL1
40
SE
RIE
S
22mm
140mm
LINE DIAGRAM
INTELLIGENT TOUCH SENSOR OPERATION More sophisticated than the rest, the IL140 series has a cleverly designed touch sensor switch incorporated into the lens. With no visible signs of a switch, it provides a sleek attractive appearance whilst still offering direct operation at the light. Not only is it a touch sensor switch, it’s also a 3 function dimmer, full output, 60% output or 30% output allows total control of your lighting needs.
Touch Sensor Switch/Dimmer
TLCM30 Trailer Lamp Timer Module 30 Minute
TLCM60 Trailer Lamp Timer Module 60 Minute
TLCM180 Trailer Lamp Timer Module 180 Minute
SPARE PARTS & ACCESSORIES
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 70 // roadvision.com.au*Lifetime based on 100,000 hour LED lifespan*Lifetime based on 100,000 hour LED lifespan
81
7/8
18
SE
RIE
S
LED Interior / Utility Lamps
FEATURES � LumenX® 817 4” round grommet mount & 818 5.5” round
flange mount lamps
� Suitable for interior or exterior applications
� Multi-volt 9-32V DC input & low current draw
� 9 LumenX® White LED’s producing 300 lumens of light output
� Super low current draw of 0.3 amps @ 13.8V DC
� LumenX® optics for even, round light distribution
� 100,000 hour LED lifespan with solid state technology
� Water & dust proof to IP67
� Operates in temperatures down to -30°C
� Waterproof AMP style connector
POLYCARBONATELENS4W AMP
PLUGPOLYCARBONATE
HOUSINGIP68
SUBMERSIBLE
Introducing PETERSON’s LumenX® Series… The brightest most efficient LED lighting in the industry! Peterson’s new LumenX® Series safety lights take LED
brightness and safety to a whole new level. Engineered around the latest ultra-bright diodes, the LumenX® Series comprises stop/tail, indicator, reverse and
work lights available in 4” round and 6” oval footprints. Peterson’s in-house design, engineering, tooling and manufacturing teams collaborated closely to
harness the new LED’s blazing intensity. The key was a radical new lens design with optics so efficient at dispersing light that the entire lens illuminates fully.
Photometric testing proves LumenX® reds are 25% brighter; LumenX® ambers test twice as bright. LumenX® Series models include red, amber and white in
both 9 LED 4” rounds and 10 LED ovals. Each model features fully integrated injection moulding for robust protection and are supplied with AMP compatible
connectors. Peterson’s LumenX® Series lamps are multi-volt 9-32V, water and dust proof to IP67, fully compliant with ADR/ECE regulations and come with a
100,000hr rated LED lifespan. Proudly made-in-USA and backed by Petersons lifetime* warranty, that’s why Peterson is the premium choice in LED lighting!
PART NUMBERS
M817W-9Interior/Exterior Lamp LED 9-32V Round 140x35mm
M818W-9Interior/Exterior Lamp LED 9-32V Round 108x35mm
SPECIFICATIONS
M817W-9 M818W-9
Lumens Light Output (Effective) 300lm 300lm
Light Source 9 White LED’s 9 White LED’s
Power Watts 4.2W 4.2W
Current Draw Amps 0.3A @ 13.8V DC 0.3A @ 13.8V DC
Dimensions 108x35mm 140x35mm
Mounting Holes 114mm Grommet Mounting Hole in Material up to 6mm 115mm Mounting Hole
Wiring AMP Plug AMP Plug
Weight 100g 100g
LIFETIMEWARRANTY9-32V OEM300
LUMENS
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 71
81
7/8
18
SE
RIE
S
LINE DIAGRAM
M817W-9 M818W-9
TLCM30 Trailer Lamp Timer Module 30 Minute
TLCM60 Trailer Lamp Timer Module 60 Minute
TLCM180 Trailer Lamp Timer Module 180 Minute
B426-18 Grommet Rubber
417-1 Mounting Bracket Single
417-2 Mounting Bracket Twin
417-3 Mounting Bracket Triple
B817-49 AMP Plug 3 Pin 200mm
B817-49L AMP Plug 3 Pin 2.5m
B817-491 AMP Plug 3 Pin to PL3 Adaptor
SPARE PARTS & ACCESSORIES
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 72 // roadvision.com.au
M3
68
SE
RIE
S
LED Interior / Utility Lamps
FEATURES � 12 volt DC input
� 400lm instant light output
� Super low current draw of 0.4 amps @ 13.8V
� 100,000 hour LED life span with solid state technology
� Light weight high impact ABS housing and PMMA lens
� Weatherproof
� Supplied pre-wired
� Surface mount allows greater ease of fitment
PMMALENS2.6W PRE-WIRED
200mm
ABSHIGH IMPACTHOUSING
WEATHERPROOF
PETERSON’s M368 Series interior/exterior lamps are the perfect solution for surface mount down light and work light applications… Generating an impressive
400 lumens of light output, they are perfect for interior lamps in RV’s, caravans or vehicle canopies. The slim line surface mount design results in a sleek
OEM look whilst being extremely easy to install. Featuring 9 high powered white LED’s incorporated with diffused optics for even round light distribution. 12
volt input, water and dust proof and manufactured to Peterson’s stringent standards, the M368 Series utility lamps are built to last a lifetime*. PETERSON, the
premium choice in LED lighting!
PART NUMBERS
M368Interior/Exterior Lamp LED 12V Rectangular 148x71mm Surface Mount
SPECIFICATIONS
M368
Lumens Light Output (Effective) 400lm
Light Source 9 White LED’s
Power Watts 2.6W
Current Draw Amps 0.4A @ 13.8V DC
Dimensions 148x71x20mm
Mounting Holes 120mm Centres
Wiring 200mm Pre-Wired
Weight 0.06kg
LIFETIMEWARRANTY12V 400
LUMENS
LINE DIAGRAM
OEM
TLCM30 Trailer Lamp Timer Module 30 Minute
TLCM60 Trailer Lamp Timer Module 60 Minute
TLCM180 Trailer Lamp Timer Module 180 Minute
SPARE PARTS & ACCESSORIES
*Lifetime based on 100,000 hour LED lifespan
Trailer Lamp Control ModuleAutomatically turns off trailer interior lighting to prevent flat batteries. Designed for refrigerated
transport and suited for evacuation bays and utility vehicles with interior work lights.
Part numbers TLCM30 Time default set to 30 minutesTLCM60 Time default set to 60 minutesTLCM180 Time default set to 180 minutesTLCM1 Harness 1 metre (Sold separately)
Features � Tamper proof enclosure � IP68 Rating � Applicable to all trailers and lamp types � Easy operation
› 1 By pressing button the lamp(s) turns ON
› (LED illuminates GREEN). › 2 After preset time period* lamps
automatically turns off (LED turns OFF)
› 3 Press button to reset � Low voltage disconnect
› 1 If battery voltage falls below 12.1V lamp(s) turns OFF (LED illuminates RED)
› 2 LED status remains red until voltage rises above 12.8V for 30 seconds (Turns OFF)
PUSH TO RESET
TIMER75%
NO JUMP START
+ - AUTO OFF
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 74 // roadvision.com.au
M3
60
SE
RIE
S
*Lifetime based on 100,000 hour LED lifespan
LED Interior / Utility Lamps
FEATURES � 9-32 volt DC input
� Super low current draw of 1.8 amps @ 13.8V DC
� 10 super bright white LED’s for maximum illumination
� 1200lm light output
� 100,000 hour LED life span with solid state technology
� Tough powder coated aluminium housing (M360 & M365)
� Light weight Polycarbonate housing (M360-1)
� Virtually unbreakable polycarbonate lens
� Shock resistant
� Weatherproof to IP67
� Supplied pre-wired
� Recessed mount decreases the risk of impact damage
� M365 model available with PIR motion detector
POLYCARBONATELENS30W1200
LUMENSHARD-WIRED
ALALUMINIUM
HOUSING
Peterson’s M360 Series interior lamps are an innovative, flush mount high output lighting solution… Peterson’s M360 Series LED interior lamps are smarter
than the average interior lamp, an innovative design featuring motion sensor triggering on the M365 model. An ideal solution for flush mount interior lighting
applications, the M360 Series offers an impressive 30 watts of high intensity great white LED power producing 1200lm of light output. The flush mounted
design eliminates damage from forklifts whilst loading and unloading trailers and features a rugged aluminium or optional polycarbonate housing incorporated
with fresnel optics for even round light distribution. Multi-volt, water and dust proof and manufactured to Peterson’s standards, the M360 Series interior lamps
are built to last a lifetime*.
PART NUMBERS
M360Interior Lamp LED 9-32V Rect 463x146mm Recess Mount
M360-1Interior Lamp LED 9-32V Rect 463x146mm Recess Mount PC Body
M365Interior Lamp LED 9-32V Rect 463x146mm Recess Mount with Motion Sensor
SPECIFICATIONS
M360 Series
Lumens Light Output (Effective) 1200lm
Light Source 10 White LED’s
Power Watts 30W
Current Draw Amps 1.8A @ 13.8V
Dimensions 463x146mm
Mounting Holes 173/443x102mm
Wiring Hard-Wired
Weight 1.0kg
9-32V IP67WATERPROOF
LIFETIMEWARRANTYOEM
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 75
M3
60
SE
RIE
S
LINE DIAGRAM
INBUILT MOTION SENSOR TIMER…The Peterson M365 interior lamp incorporates intelligent PIR motion sensor circuitry turning the lamp on when you need it and off when you don’t. Smarter than other interior lamps, the M365 will only turn on when movement is detected. The inbuilt timer circuitry then turns the lamp off once activity ceases, reducing power consumption when it is not required and the risk of flat batteries.
On initial illumination the M365 will run for 4 minutes without any motion detected and then turn off. Once motion is detected by the inbuilt motion sensor, the lamp will turn on and run for a further 4 minutes after the last motion is detected.
TLCM30 Trailer Lamp Timer Module 30 Minute
TLCM60 Trailer Lamp Timer Module 60 Minute
TLCM180 Trailer Lamp Timer Module 180 Minute
SPARE PARTS & ACCESSORIES
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 76 // roadvision.com.au
PETERSON’s utility or accent lighting is perfect for all applications! Peterson’s 388 Series accent lamps feature 16 super bright LED’s and are cleverly
designed with an optional easy fit surface mount bracket. Recessed or flush mounted, the 388 Series are a stylish low amperage solution for interior or exterior
applications. PETERSON, the premium choice in LED lighting!
PART NUMBERS
388AInterior/Exterior Dress-up Lamp LED 9-32V Strip Lamp 155mm Surface or Recess Mount Amber
AMBER
388CInterior/Exterior Dress-up Lamp LED 9-32V Strip Lamp 155mm Surface or Recess Mount White
WHITE
388RInterior/Exterior Dress-up Lamp LED 9-32V Strip Lamp 155mm Surface or Recess Mount Red
RED
SPECIFICATIONS
388
Light Source 16 LED’s
Current Draw Amps 0.1A @ 13.8V
Dimensions 162x27x15mm
Mounting Holes 140mm Centres or 130x20mm Cut Out
Wiring 200mm Pre-Wired
Weight 50g
38
8 S
ER
IES
LED Interior / Utility Lamps
FEATURES � 9-32 volt input & low current draw
� 100,000 hour LED life span with solid state technology
� Weatherproof to IP67 & vibration resistant
� Polycarbonate lens with optional ABS base (supplied)
� Supplied pre-wired with 200mm leads
� Surface or flush mount design
� Maintenance free
� Stylish white, red, amber or blue LED options
� Optional chrome dress up bezel
POLYCARBONATELENS
PRE-WIRED200mm
ABSHIGH IMPACTHOUSING
IP67WATERPROOF9-32V
LINE DIAGRAM
LIFETIMEWARRANTYOEM
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 77
38
8 S
ER
IES
SURFACE OR RECESSED MOUNT VERSATILITY!The 388 Series can be recessed without the brackets, or surface mounted with the bracket supplied.
388-09X Chrome Mounting Bracket
SPARE PARTS & ACCESSORIES
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 78 // roadvision.com.au
RV
RW
LE
D S
ER
IES
LED Torches & Workshop lamps
10-30V 4400LUMENS 50W CIGARETTE
2.5M PLUGREMOTECONTROLLED
NLNYLON
HOUSING RETAILHARDENEDGLASS LENS
The ultimate LED search light, high performance 4,400lm, wireless remote control, fixed/magnetic mount, 380º rotation/137º tilt, all in a LED search lamp…
ROADVISION is proud to introduce the RVRWLED remote controlled LED search lamp. Feature packed with 10 high intensity 5 watt LED’s the RVRWLED
produces a whopping 4,400 lumens of light output. The RVRWLED is operated by a wireless remote control that can be operated from 200m and features 380º
of rotation and 137º of tilt. With 10-30V DC input, fixed and magnetic mounting options in the one unit, low current draw of just 2.8 amps @ 13.8V DC and
simple plug in 2.5m cigarette plug lead… The RVRWLED has it all.
PART NUMBERS
RVRWLEDRemote Controlled LED Search Lamp
SPECIFICATIONS
RVRWLED
Beam Type Spot Beam
Light Source 10 x 5 Watt High Performance LED’s
Lumens Light Output (Effective) 4400lm
Input Voltage 10-30V DC
Current Draw Amps 2.8A @ 13.8V DC
Dimensions 175x175x190mm
Wiring 2.5m Lead with Cigarette Lighter Plug - 200m Wireless Remote Control
YEARWARRANTY
ON OFF
UP, DOWN, LEFT & RIGHT
CONTROLS
FEATURES � Wireless remote controlled operation
� Multi-volt 10-30V DC input & low current draw
� 10 x 5 Watt high performance LED’s
� Spot beam 4,400lm 50W light output
� 380º rotation x 137º tilt using high-torque motors
� 200m transmitter range
� Fixed/magnetic mount in the one unit
� IP67 rated LED lamp module
� Weather, salt water, UV & vibration resistant
� 100km/h rated magnetic mount
� High impact nylon housing & hardened glass lens
� Simple cigarette lighter connection with 2.5m lead
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 79
RV
RW
LE
D S
ER
IES
DIMENSIONS
137º TILT
380º ROTATION
175mm
175mm
190mm
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 80 // roadvision.com.au
SL
25
LED Torches & Workshop lamps
FEATURES � Multi-function LED torch & inspection lamp
� 100lm inspection lamp with 8 SMD LED’s
� Adjustable head with 0.5W 15lm LED for use as a directional
torch
� Body extends out, revealing an inspection lamp
� Features a magnet in the end, for hands-free use
� Powered by 3 long-lasting Lithium AAA batteries (supplied)
3 x AAA 100/15LUMENS CORDLESSLIGHTWEIGHT
PLASTIC
PLWEATHER
RESISTANT
REDFUEL SL25 multi-function LED torch & inspection lamp from Schumacher is a truly versatile hand held workshop lamp. Featuring a 0.5W 15 lumen torch
on an adjustable head, it can be rotated 90 degrees to provide illumination right where you need it. Pull out the extendable body to reveal a high powered 100
lumen inspection lamp with 8 SMD LED’s. Powered by 3 long-lasting Lithium AAA batteries (supplied), the SL 25 also features a magnet on the bottom for
hands free use.
PART NUMBERS
SL25Multi-function LED Torch & Inspection Lamp 100lm
SPECIFICATIONS
SL25
Beam Type Hand Held Inspection Lamp & Torch
Light Source 8 SMD LED’s + 1x0.5W Torch LED
Lumens Light Output (Effective) 100lm/15lm
Battery Type 3 x Lithium AAA Batteries (supplied)
Operating Time -
Charger -
Charging Time -
YEARWARRANTYRETAIL
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 81
SL
26
GU
LED Torches & Workshop lamps
FEATURES � Multi-function LED torch & inspection lamp
� 200lm inspection lamp with 5 SMD LED’s
� High powered 1W LED directional torch
� Unique ball joint enables 3600 swivel & tilt
� Soft touch rubberised casing
� Features a magnet and swivel hang hook for hands-free use
� Rechargeable Lithium Ion battery
� USB/Micro USB charging cable
1500mAh 200LUMENS CORDLESS
ABSHIGH IMPACTHOUSING
WEATHERRESISTANT
REDFUEL SL26GU multi-function LED torch & inspection lamp from Schumacher is the baby of the professional workshop lamps range. Featuring a high
powered 1 watt directional torch and a 200 lumen 5 LED inspection lamp with 1200 spread of light. With a unique and innovative 3600 swivel and tilt body, it
enables the light source to be positioned in any direction. High quality 1500mAh rechargeable Lithium Ion battery for longer life, no memory effect and a much
slower discharge than traditional Ni-MH batteries. Featuring a swivel hook and rubber-covered magnet, the SL26GU allows hands-free operation.
PART NUMBERS
SL26GUMulti-function LED Torch & Inspection Lamp 200lm
SPECIFICATIONS
SL26GU
Beam Type Hand Held Inspection Lamp & Torch
Light Source 5 SMD LED’s + 1W Torch LED
Lumens Light Output (Effective) 200lm
Battery Type 1500mAh Lithium Ion Battery
Operating Time 3hrs (Inspection lamp) 6hrs (Torch)
Charger USB/Micro USB
Charging Time 2.5hrs
YEARWARRANTYRETAIL
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 82 // roadvision.com.au
SL
16
2B
U
LED Torches & Workshop lamps
FEATURES � Multi-function LED torch & inspection lamp
� 300lm inspection lamp with 8 SMD LED’s
� High powered 1W LED directional torch
� High/Low inspection lamp outputs
� Unique ball joint enables 3600 swivel & tilt
� High impact ABS housing
� Features a magnet and swivel hang hook for hands-free use
� Rechargeable Lithium Ion battery
� USB/Micro USB charging cable plus car charger
REDFUEL SL162BU multi-function LED torch & inspection lamp from Schumacher is the mid-range professional workshop lamp. Featuring a high powered
1 watt directional torch and a 300 lumen 8 LED high/low inspection lamp with 1200 spread of light. With a unique and innovative 3600 swivel and tilt body, it
enables the light source to be positioned in any direction. High quality 2000mAh rechargeable Lithium Ion battery for longer life, no memory effect and a much
slower discharge than traditional Ni-MH batteries. Featuring a swivel hook and rubber-covered magnet, the SL162BU allows hands-free operation.
PART NUMBERS
SL162BUMulti-function LED Torch & Inspection Lamp 300lm
SPECIFICATIONS
SL162BU
Beam Type Hand Held Inspection Lamp & Torch
Light Source 8 SMD LED’s + 1W Torch LED
Lumens Light Output (Effective) 300lm
Battery Type 2000mAh Lithium Ion Battery
Operating Time3/6hrs (High/low inspection lamp)
8hrs (Torch)
Charger12V DC Car Charger with
USB/Micro USB
Charging Time 3hrs
2000mAh 300LUMENS CORDLESS
ABSHIGH IMPACTHOUSING
WEATHERRESISTANT
YEARWARRANTYRETAIL
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 83
SL
13
7R
U
LED Torches & Workshop lamps
FEATURES � Professional multi-function LED torch & inspection lamp
� 600lm inspection lamp with 16 SMD LED’s
� High powered 3W LED directional torch
� High/Low inspection lamp outputs
� 3 LED battery indicating lights
� Unique ball joint enables 3600 swivel & tilt
� Soft touch rubbersied casing
� 2 rear & 1 bottom magnet and 2 swivel hang hook for hands-
free use
� Rechargeable Lithium Ion battery
� USB/Micro USB charging cable plus AC & DC chargers
REDFUEL SL137RU multi-function LED torch & inspection lamp from Schumacher is the ultimate trade professional workshop lamp. Featuring a high powered
3 watt directional torch and a massive 600 lumen 16 LED high/low inspection lamp with 1200 spread of light. With a unique and innovative 3600 swivel and
tilt body, it enables the light source to be positioned in any direction. Two high quality 2600mAh rechargeable Lithium Ion batteries and an three LED battery
indicator lights allows a full 12 hours of usage. Featuring two swivel hooks and 3 magnets, the SL137RU allows complete hands-free operation.
PART NUMBERS
SL137RUMulti-function LED Torch & Inspection Lamp 200lm
SPECIFICATIONS
SL137RU
Beam Type Hand Held Inspection Lamp & Torch
Light Source 16 SMD LED’s + 3W Torch LED
Lumens Light Output (Effective) 600lm
Battery Type 2 x 2600mAh Lithium Ion Batteries
Operating Time6/12hrs (High/low inspection lamp)
14hrs (Torch)
Charger12V DC Car Charger with USB/Micro
USB & 240V AC Wall Charger
Charging Time 6hrs
5200mAh 600LUMENS CORDLESS
ABSHIGH IMPACTHOUSING
WEATHERRESISTANT
YEARWARRANTYRETAIL
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printingPage 84 // roadvision.com.au
SL
16
7R
I
LED Torches & Workshop lamps
FEATURES � Professional LED cordless flood lamp
� High powered 600lm 10W COB LED
� 1800 swivel head for desired lighting angle
� Soft touch foam covered handle
� Die-cast aluminium housing with tubular steel framed stand
� High impact ABS side moulding
� 4 strong foam covered magnets on base
� On/Off rocker switch
� Weatherproof for outdoor use
� Rechargeable Lithium Ion battery
� AC & DC chargers
REDFUEL SL167RI cordless LED floodlight from Schumacher is ideal for electricians, construction workers and DIYers. Featuring a super-bright 10 watt COB
LED with 1200 spread of light and 1800 swivel head, it allows accurate illumination of the whole work area. High quality 2200mAh rechargeable Lithium Ion
battery for longer life, no memory effect and a much slower discharge than traditional Ni-MH batteries. Featuring 4 strong foam covered magnets on the base,
the SL167RI can even be attached to the bonnet for complete hands-free engine bay illumination.
PART NUMBERS
SL167RICordless LED workshop flood lamp 600lm
SPECIFICATIONS
SL162BU
Beam Type 1200 workshop flood lamp
Light Source 10W COB LED
Lumens Light Output (Effective) 600lm
Battery Type 2200mAh Lithium Ion Battery
Operating Time 2.5hrs
Charger12V DC Car Charger &
240V AC Wall Charger
Charging Time 5hrs
2200mAh 600LUMENS CORDLESS
ALALUMINIUM
HOUSING
ABSHIGH IMPACTHOUSING
WEATHERRESISTANT
YEARWARRANTYRETAIL
© Copyright Baxters Pty Ltd 2018. All information is found to be correct at time of printing roadvision.com.au // Page 85
SL
17
6R
I
LED Torches & Workshop lamps
FEATURES � Professional LED cordless underhood work lamp
� High powered 3 x 400lm 5W COB LED’s
� 45° angle adjustable lamp head directs light where you need it
� 60° Beam Angle with PC lens to protect user’s eyes
� Die-cast aluminium housing with durable ABS body
� Foam covered handles retractable handles
� Battery status LED indicators
� Rechargeable Lithium Ion battery
� USB/Micro USB charging socket
REDFUEL SL176RI cordless LED underhood work lamp from Schumacher is the ultimate trade professional engine repair lamp. Featuring three high powered
5W COB LED’s that produce a massive 1200lm light output with 600 light spread. Each COB LED is covered by a PC lens to protect the users eyes and feature
450 angle adjustment to direct light exactly where you need it. High quality 2600mAh rechargeable Lithium Ion battery for longer life, no memory effect and
a much slower discharge than traditional Ni-MH batteries. With foam covered extendable handles, the SL176RI easily clamps onto the bonnet for complete
hands-free engine bay illumination.
PART NUMBERS
SL176RICordless LED underhood work lamp 1200lm
SPECIFICATIONS
SL137RU
Beam Type 600 directional work lamps
Light Source 3 x 5W COB LED’s
Lumens Light Output (Effective) 1200lm
Battery Type 2600mAh Lithium Ion Battery
Operating Time 5-9hrs
Charger USB/Micro USB
Charging Time -
2600mAh 1200LUMENS CORDLESS
ABSHIGH IMPACTHOUSING
WEATHERRESISTANT
YEARWARRANTYRETAIL
top related