Transcript
8/2/2019 Lecture 2 Maps Plans and Charts
1/48
Surveying for Petroleum Engineers
Lecture 2
Survey Maps, Plans and Charts
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
2/48
Introduction
Mapping surveys are made to:
(1) Determine the locations of natural and culturalfeatures on the earths surface.
(1) Define the configuration (relief) of the surface.
Once located these features can be represented onmaps
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
3/48
Introduction (continued)
Natural features include:vegetation, rivers, lakes, oceans, and so on.
Cultural (artificial) features are the product ofpeople and include:
roads, rail roads, buildings, bridges, canals,
boundary lines, and so on.
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
4/48
Introduction (continued)
The relief of the earth includes:
hills, valleys, plains, and other surfaceirregularities.
Lines and symbols are used to depict features shown onmaps.
Names and legends are added to identify the differentobjects.
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
5/48
Basic Map
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
6/48
Information Table
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
7/48
Types of Maps
Two different types of maps are prepared as aresult of mapping surveys which are:
Planimetric maps.
Topographic maps.
Planimetric maps: depict natural and culturalfeatures in the plan (X-Y) views only.
Topographic maps: also include planimetric
features, but in addition they show theconfiguration of the earths surface.
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
8/48
Planimetric Maps
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
9/48
Topographic Maps
For topographic maps, relief is shownquantitatively using:
Contours.
Digital Elevation Models (DTM).
Three- dimensional perspective models.
qualitatively using:
* color. * hachure.* shading. * tinting.
Mohamed Elwageeh
C
8/2/2019 Lecture 2 Maps Plans and Charts
10/48
Contour Lines
Contour plan with derived profile(line AB)
Mohamed Elwageeh
C t Li
8/2/2019 Lecture 2 Maps Plans and Charts
11/48
Contour Lines
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
12/48
3D Topographic Map
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
13/48
3D Surface Map
Mohamed Elwageeh
A C M f Al H
8/2/2019 Lecture 2 Maps Plans and Charts
14/48
A Contour Map of Al-Hassana
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
15/48
Map Applications
Both types of maps (planimetric & topographic) are usedby:
Geologists to investigate mineral, oil, water, andother resources.
Architects in housing and landscape design. Agriculturists in soil conservation work.
Engineers and planners to determine the mostdesirable and economical locations of highways,railroads, canals, pipelines, reservoirs and otherfacilities.
Archeologists.
Geographers. Scientists.
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
16/48
Performing Mapping Surveys
Two basic methods for performing mapping surveys:
(1) Aerial techniques (Photogrametric):
For large areas and small scale maps.
(2) Ground (field) techniques:
For small areas and large scale maps.
Often a combination of both method is employed
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
17/48
Ground Technique to Produce a Detailed Map
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
18/48
Aerial photograph of Niagra Falls area
Mohamed Elwageeh
M Cl ifi i
8/2/2019 Lecture 2 Maps Plans and Charts
19/48
Map Classification
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
20/48
Mohamed Elwageeh
Map Classification
M Cl ifi i
8/2/2019 Lecture 2 Maps Plans and Charts
21/48
Mohamed Elwageeh
Map Classification
8/2/2019 Lecture 2 Maps Plans and Charts
22/48
Map Scale
Map Scale is the ratio of the length of an
object or feature on a map to the truelength of the object or feature.
The term scale is used to indicate that
measuring units adopted will be equivalent inany direction. It is key to the production of anymap or plan that we maintain scale in all
directions, and do not distort the shape of thefeature in its representation.
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
23/48
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
24/48
Map Scale and Accuracy
Large scale maps are used for mapping
limited areas and high accuracy.
Medium scale maps are used for mapping larger
areas and moderate accuracy.
Small scale maps are used for mapping large
areas where a lower accuracy will suffice.
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
25/48
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
26/48
Mohamed Elwageeh
M T /S l V D t il /F t
8/2/2019 Lecture 2 Maps Plans and Charts
27/48
Map Type/Scale Versus Details/Features
Mohamed Elwageeh
S
8/2/2019 Lecture 2 Maps Plans and Charts
28/48
Map Type/Scale Versus Details/Features
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
29/48
Mohamed Elwageeh
Ways of Describing Scale
8/2/2019 Lecture 2 Maps Plans and Charts
30/48
Ways of Describing ScaleVerbal Scale: might be one centimeter to one kilometer. Such adescription is clear and concise, easily understood butperhaps difficult to apply.
Representative fraction scale(RF): shows the relationship betweenone of any unit on the map and the same units on the ground. RF isusually written like a mathematical proportion with a colon (as in1:25,000). In this example, one unit of any length(e.g. one mm) onthe map represents
25,000 of the same unit on the ground.Graphic scales: provides a direct measure of the distance over theground represented by the corresponding distance on the map.Graphic scales have a unique benefit they remain accurate even if
the map image is enlarged or reduced by a photocopy machine or incomputer.
Mohamed Elwageeh
Graphical Scales
8/2/2019 Lecture 2 Maps Plans and Charts
31/48
Graphical Scales
Diagonal net Scale (1: 1000) with accuracy1 m
meters
Linear GraphicalScales
Mohamed Elwageeh
Standard Drawing Sizes
8/2/2019 Lecture 2 Maps Plans and Charts
32/48
Standard Drawing Sizes
Mohamed Elwageeh
Magnetic North (Magnetic Meridian)
8/2/2019 Lecture 2 Maps Plans and Charts
33/48
Magnetic North (Magnetic Meridian)
Mohamed Elwageeh
Magnetic
North
G hi N th (A t i l M idi )
8/2/2019 Lecture 2 Maps Plans and Charts
34/48
Geographic North (Astronomical Meridian)
Geographic North
Northern Pole
Greenwich Line(Prime
Meridian))
OriginEquator
(Latitude 0)
Mohamed Elwageeh
North Direction s
8/2/2019 Lecture 2 Maps Plans and Charts
35/48
North Direction sDirection of a line is the horizontal angle from a
reference line called the north direction(meridian).
There are four basic types of north directions:
1- Geographic (True) North:It is a tangent to themeridian passing by the point towards North Pole.
2- Magnetic North:It is the direction of the verticalplane shown by a freely suspended magnetic needle of
a compass. It changes from point to another and is
affected by any magnetic field.True North Magnetic North = Magnetic Declination
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
36/48
North Directions (continued)
3- Grid North: As tangent to meridians are not parallel, then theNorth directions are not parallel. Use only one North for the whole surveyed area which
is the tangent to the mean meridian of the surveyedarea.
4- Arbitrary (assumed) meridian:An arbitrary chosenline with a direction value assigned by the observer.
Different North Directions
8/2/2019 Lecture 2 Maps Plans and Charts
37/48
Different North DirectionsMagnetic Declination
Mohamed Elwageeh
N th Di ti S b l
8/2/2019 Lecture 2 Maps Plans and Charts
38/48
North Direction Symbols
Mohamed Elwageeh
Symbols
8/2/2019 Lecture 2 Maps Plans and Charts
39/48
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
40/48
Mohamed Elwageeh
Plans
8/2/2019 Lecture 2 Maps Plans and Charts
41/48
Plans
The essential difference between maps and
plans is their use. As in an inventory, mapsportray the detail (for example, topography,surface features, boundaries, etc.) for whichthey were designed. Engineering- surveyingplans, on the other hand, not only show theexisting terrain (or other) conditions, but theycan also depicts proposed alterations (i.e.,
designs) to the existing landscape. Most plansare drawn to a large scale.
Mohamed Elwageeh
Plans ( ti d)
8/2/2019 Lecture 2 Maps Plans and Charts
42/48
Plans (continued)
A plan is usually localized, and we are not
concerned with the location on the earth,but must still provide some means of
relocation or return. Typically, plans areprovided to support local development of aparcel or small area. Surveyors produce
them and architects scribble on them.Examples will follow shortly.
Mohamed ElwageehMohamed Elwageeh
Plans (continued)
8/2/2019 Lecture 2 Maps Plans and Charts
43/48
Plans (continued)
A Survey plan is normally produced at such ascale that the earth can be considered as flat.This means that scale is uniform across theplan. Details giving scale of the map, and its
orientation must still be provided. And, for thedirection the plan must indicate whether thisrelates to grid north or true north.
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
44/48
Plan
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
45/48
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
46/48
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
47/48
Mohamed Elwageeh
8/2/2019 Lecture 2 Maps Plans and Charts
48/48
Thank You For Attention
top related