Langmuir – Blodgett film Sloviková Alexandra Zajíčková Michaela.

Post on 28-Mar-2015

226 Views

Category:

Documents

2 Downloads

Preview:

Click to see full reader

Transcript

Langmuir – Blodgett film

Sloviková Alexandra

Zajíčková Michaela

History

• 17th century

First discovery of optic efect• 19th century

The beginning of preparation of the thin layers• 20th century (70th years)

The expansion of plasma technologies• 20th century (80th years)

Development of Lamgmuir – Blodgett films

Why study molecular orientation in thin films?

• interfacial properties

(optical, electronic and mechanical)

• molecular interactions

• organizational model for complex systems

“Chemically” cleanedsilicon wafer

Silicon oxide “barrier”layer

Photoresist

Introduction

• Langmuir – Blodgett films are monofilms or multifilms on solid substrate.

• Molecules form a monolayer at the interface air-liquid

• They are nanomaterials

• The films are layers at scale 0,1 – 0,001 nm~ 1 nm

Monolayer Phases

• When the molecules are first spread on the water surface, they are loosely packed and form a so-called gas phase.

• Increasing the surface pressure translates as a transition to a liquid phase.

• Further increases in pressure bring about a last compressibility change that is associated to a liquid-solid phase transition.

Molecular area (nm2/molecule)

Su

rface

pre

ssu

re (

mN

/m)

Gas phase

Liquid phase

Solid phase

• A barrier on the water surface pushes and compacts the molecules.

• Spreading amphiphile molecules on a water surface yields monolayers or films where the hydrophobic segments stem at the water/air interface.

• Films with tailored stability, orientation of molecules or phase transition can thereby be transferred to the substrate.

Characteristics of substrate

• Hydrophilic:– Glass– Aluminium, chromium, – Wafer

• Hydrophobic:– trimethylchlorsilane

Film transfer

• Vertical– This technique is actual for highly hydrophobic molecules.

• Horizontal– This technique is suitable for transfer of very stif films.

WaterWater subphase

Langmuir – Blodgett films

• Vertically prepared films• 3 types:

– repeated submergence – type X– repeated emergence – type Z– switching both types – type Y

X Z Y

References

• [1] doc.RNDr. Vladimír Čech, Ph.D. - Lectures

• [2] http://isi4.isiknowledge.com\portal.cgi

• [3] http://www.sciencedirect.com

• [4] http://google.com

• [5] http://nanotechnologweb.org

top related