L-GAGE ® LE Laser Triangulation Displacement Sensor.
Post on 11-Jan-2016
219 Views
Preview:
Transcript
L-GAGE® LE
Laser TriangulationDisplacement Sensor
LE Series Agenda
■ M&I overview
■ Introducing the L-GAGE® LE
■ Competitive comparison
■ Applications
■ Sales resources
M&I Overview
M&I Product Line
Measuring Arrays
Optical Distance
Other Measuring
Ultrasonic
Banner Optical Distance Products
LH30
LH80
LH150
LG5
LG10
Q50A
Q50B
LE550
LT3
LT7
10 100 1000 10000
Range (mm)
0.015mm
4mm
1.25mm
1mm
2mm
1.5mm
0.01mm
0.001mm
0.004mm
0.004mm
Time of Flight
Triangulation
(Resolution at Max Range)
L-GAGE® LE
The LE provides a low cost, easy to use, reliable solution for measurements across a variety of targets including metal, wood, paper and plastic
■ Key features include:
– LCD display
– Linear Array
– Laser Emitter
– Input Modes
– Analog & Discrete outputs
LCD display
■ Real time display for easy setup and troubleshooting
■ 8 characters x 2 lines provides easy to read feedback
■ 3 LEDs for quick reference of sensor status
■ Great contrast for easy reading
Run Mode Menu System
Linear Array
Laser Emitter
■ Visible beam for easy setup and alignment
■ Spot size ~ 2 mm x 6 mm @ 1 m
■ Class 2 laser
Inputs and Outputs
■ Inputs
■ Analog Output
■ Discrete Output
Inputs
■ Set independent analog and discrete limits
– Teach using display or remote teach
– Adjust using display
■ Multi-function input wire
– Remote teach
– Trigger
– Laser enable
– Master/Slave
Analog output
■ Analog Output:
– Choose appropriate model
• 4-20 mA
• 0-10 V
– 7 Trigger Modes
• Measure for period of time, export one value
– Min, Max, Range, etc.
• Reduce PLC programming
Discrete output
■ Discrete Output:
– Configurable PNP or NPN(current sourcing or sinking)
– Single switch point or window(configurable NO/NC)
– Alarm/Health modes alert to loss of signal
– Same delays/timer options as DF-G1
LE Models
■ LE550IQ – Current analog output, rotatable QD
■ LE550IQP - Current analog output, pigtail QD
■ LE550I - Current analog output, 2 m flying leads
■ LE550IW/30 - Current analog output, 9 m flying leads
■ LE550UQ – Voltage analog output, rotatable QD
■ LE550UQP - Voltage analog output, pigtail QD
■ LE550U - Voltage analog output, 2 m flying leads
■ LE550UW/30 - Voltage analog output, 9 m flying leads
LE accessories
■ Mounting brackets
SMBLEL (86754)
– Standard L-bracket provides 4 orientation options
SMBLEU (86755)
– Rugged model providesmaximum sensor protection
SMBLEFA (88226)
– Bar clamp model providesflexible alignment options
Competitive Comparison
Product L-GAGE LE550
Sick DT20 HI*DT20P224B
Leuze ODSL 8*ODSL 8/V66-500-S12
Keyence GV* AMP & HEAD
Range 100 - 1000 mm 100 – 1000 mm 20 - 500 mm 200 – 1000 mm
Performance(at max distance)
Resolution 1 mmLinearity +/- 4.5mm (0.5%)Accuracy +/- 10 mm (1%)
Repeatability +/- 4 mm
Resolution 1 mmLinearity +/- 6mm (0.67%)Accuracy +/- 10 mm (1%)
Repeatability +/- 5 mm
Resolution 0.5 mmAccuracy +/- 20 mm (4%)Repeatability +/- 15 mm
Repeatability +/- 15 mm
Response Time 2.0 - 50 ms 2.5 - 40 ms 20 ms 1.5 – 50 ms
Ease of UseDisplay (2 lines x 8
characters)3 LEDs
Display (1 line x 6 characters)
2 LEDs
No Display2 LEDs
Display (1 line x 6 characters)
2 LEDs
Outputs 1 analog, 1 discrete 1 analog, 1 discrete 1 analog, 1 discrete 2 discrete
Protection class IP67 IP65 IP67/IP69K IP67
Size (face,H,D) 25 x 60 x 55 mm 24 x 59 x 54 mm 15 x 48 x 38 mm 27 x 66 x 50 mm
Competitive Comparison─ Triangulation Products
*Shorter range models available with different performance characteristics
Competitive Comparison─ Triangulation Products
■ Patented design maintains accuracy over temperature range
■ 3X faster response speed for lateral entry
■ 3X higher levels of ambient light immunity
Other Advantages
ProductL-GAGE
LE550Sick DT50
IFMO1D100
Ease of Use
Range
Performance
Response Time
Competitive Comparison─ Time of Flight Products
Applications
Quality Control/Error Detection Process Control
IndustryAbsence and/or
Excess Detection
Size (thickness/ width, height) and/or
Profile (flatness/roundness)
Positioning/Speed Control
Sorting/Part Identification
AutomotiveMissing weld nut detection, Part in place before next operation
Assembly verification, Verify shape of cast parts,
Sheet metal roll diameter, Part seated correctly in press
Identify versions of part (Tire, crankshaft, etc.)
PackagingDetect missing or extra product on a pallet
Package Profiling
Print roll diameter, Cartoning box stack, Pallet positioning
Product Identification
Material Handling
Overlapping material Cross-belt sorterStorage and retrieval automation
Food/BeverageDetect missing or extra product on a pallet
Food size (baked goods, fillets, etc)
Fill control (hopper)Roll diameter (labels, shrink sleeves, etc.)
AdditionalContainer level ,Double boards before cut,
Verify forging size, Verify board size,Verify flatness or contouring
Textile roll diameter,End effector positioning
Size grading for forest products
Installation Tips
Border of Different Luster of Color
Correct Incorrect
-1 mmSame +4 mmSame
Specifications and Terminology
Questions
top related