Korex Wondows Trifold - Korex Windowskorexwindows.com/.../2016/07/Korex-Wondows-Trifold.pdf · quality control and has better compound - higher percentage of TiO2, wall thickness
Post on 11-Apr-2020
3 Views
Preview:
Transcript
OPEN DOORSTO HAPPINESS
uPVC Window | Door | Sliding
Lift & Slide | Bi-Fold | Flyscreen
KOREXW I N D O W S
UV Resistant
Termite Proof
Weather Proof
MaintenanceFree
Colour Fast
Environment Friendly
Korex Unit Address : 249, Phase – 1, Industrial Area,
Chandigarh – 160002
Website : www.korexwindows.com
Email : sigmakd@gmail.com
Mobile : +91-9988111865
uPVC WINDOWS
PRODUCTS MANUFACTURED
Outdoor
Furniture
Aluminium Doors
& Windows
Modular Kitchens
& Wardrobes
Thermal Insulation : The frame and sash material is UPVC which is a non-conductor. It cuts the heat. Frame and sash are multi chamber. It cuts further heat. Tight gasket sealing helps in preventing leakage through the gap between frame and shutter. Multi-point locking ensures that the shutter and frame are locked and sealed properly
Gasket Material : TPE thermo plastic elastomer. These gaskets are weld able and more durable than EPDM. In addition they can be formulated of different stiffness in different areas of the cross-section. The part which goes into the profile is stiffer so that it cannot be pulled out easily. The part outside is softer so that it can offer compression and sealing.
Tropical Mix : All European and leading profile companies in India are supplying tropical mix but percentage of Titatanium Di-oxide levels are different based on their interpretation of Tropical climate conditions. Korex is supplying windows and doors with the same profile mix from South America to Australia, Middle East and India. We are not reducing TiO2 content for India as some parts of India have severe climatic conditions.
SHADE CARD
Primerose Cherry Golden Oak
Hazelnut Dark Oak Nut Tree
Grey Aluminium Silver Ash Black
Advantages
Weather ResistantMore than any other building material, Korex
windows and doors excellent material properties
are in use even after many years. As a matter of fact,
they do not alter under extreme temperature or
weathering.
Maintenance FreeKorex windows and doors systems do not require
regular repainting and expensive maintenance.
They do not rot, warp nor corrode even in tropical
and salty coastal climates. Therefore, their
maintenance is reduced to simple cleaning and
does not involve any further costs.
High SecurityHigh - stability windows and doors made by Korex
offer the best solution for increased safety. Special
fittings and glazing, qualified window fabrication
and expert installation offer an enhanced security at
various levels.
High Sound InsulationThe protection against noise is an essential
characteristic of a modern window in order to
ensure a comfortable life both at home and in the
office.
Efficient Thermal InsulationNo matter in which climate Korex windows and
doors are installed - they contribute to a cosy and
comfortable atmosphere in your home. As the
design prevents thermal bridging, the thermal
insulating performance of the finished window is
exceptionally good.
Termite ResistanceIn tropical climates wooden windows and doors are
often destroyed by termites, whereas Korex
windows and doors are fully resistant to these
insects. Thanks to the highly developed compound
of Korex windows and doors.
Maximum Water TightnessKorex windows and doors have been successfully
used in swimming - pools, marine and ocean
environments without detriment to the surface
finish or performance. One of the main assets of
Korex windows and doors systems is their
resistance to driving rain and their joint tightness.
Why Korex?
Eco Friendly : Korex windows are 100% lead free. Korex uses only Ca.Zn stabilisers.
European Standards : Our windows are classified as Class B as per EN 12608 which means outer wall thickness is 2.5mm.
Artificial Weathering Test : Korex windows are subjected to impact test before and after artificial weathering and the reduction in impact strength is noted. They are exposed to 12KJ Xenon light for 6000 hours. After this they are tested for impact load. In our case the reduction in impact strength after 6000 hours exposure was less than 4%.
Is Korex expensive? : It is important to understand what the competition is offering. Korex window is manufactured as per EN 12608 under stringent quality control and has better compound - higher percentage of TiO2, wall thickness 2.5mm, multi- chamber, TPE gaskets, pre-inserted gaskets - weather strips and is imported. The basic difference in quality plus import duty makes it costlier by around 20%. It is also important to understand whether the competition has offered the 70 series or the 60. Whether the competition has considered the recommended wind load for that particular area. If all parameters are considered then price difference would be less.
Korex in Acti�
top related