John Deere Header Adapters - bishenterprise.com · 508 South D Road - Giltner, NE 68841 61028080 (402) 849 -2674 email@bishcom.com Bish Enterprises is a privately owned company and
Post on 05-Jan-2019
214 Views
Preview:
Transcript
508 South D Road - Giltner, NE 68841 61028080 (402) 849-2674 - www.bishenterprise.com - email@bishcom.com Bish Enterprises is a privately owned company and is not affiliated with or endorsed by John Deere® or Deere & Company in any way or form. The terms “John Deere” or “Deere & Company”, and any images of John Deere® or Deere & Company equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by John Deere® or Deere & Company.
• Highest Quality Adapters on the Market, with Complete Solutions Available! • Large Knowledge Base, We’ve Been Building Adapters Since 1976!
• Improve your Performance in Some Situations. • Quality Conversions, Both Functionally and Cosmetically.
John Deere Header Adapters:
Complete Solutions o We Stock the Adapter(s), Upright Kit(s), Telescoping Power Shaft(s), and Electrical Conversion(s)
John Deere® Headers can be Adapted to Fit Almost Any Combine! o We Offer a Frame Kit for John Deere® Headers to work with:
Case IH® Cat Challenger® Cat® / Claas® / Lexion® Gleaner® New Holland®
Massey Ferguson® Oxbo® New Models Being Researched Others Can Be Custom Built
John Deere® Combines can be Adapted to Fit Almost Any Header! o We Offer Kits for John Deere® Combines to:
Case IH® Cat® / Claas® / Lexion® Gleaner® Honey Bee®
New Holland® Massey Ferguson® New Models Being Researched Others Can Be Custom Built
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
700-0004-C john deere
Corn HeadRow Head All Oliver
7600 / 7800 / 8800 / 8900 / 9700
•Adapter Plate•Convert to TPS
NONE 1-2 $1,250 Please Call To Inquire Double Drive
$600
Custom Build
Please Call
700-0004-C john deere
Corn HeadRow Head All White White Axial 9720
80"
1-1/4" Hex
•Adapter Plate•Convert to TPS
NONE 1-2 $1,250
19" Female 1-1/4" Hex 14 Series
31" Male 1-1/8" or 1-1/4" Hex 14
Series
Double Drive$600
Custom Build
Please Call
700-0004-C john deere
Corn HeadRow Head All Massey
Red Feederhouse
Rotary - 8560 / 8570 / 8590 / 8780
80"
1-1/4" Hex
•Adapter Plate•Convert to TPS
If equiped with Smart-Trac, Refer to kit 700-0011-ST 1-2 $1,250
19" Female 1-1/4" Hex 14 Series
31" Male 1-1/8" or 1-1/4" Hex 14
Series
Double Drive$600
Custom Build
Please Call
700-0004-P john deere Cutter BarPlatform
All White White Axial 972080"
1-1/4" Hex
•Adapter Plate•Convert to TPS
NONE 1-2 $1,500
19" Female 1-1/4" Hex 14 Series
31" Male 1-1/8" or 1-1/4" Hex 14
Series
Double Drive$600
Custom Build
Please Call
700-0004-P john deere Cutter BarPlatform
All Massey
Red Feederhouse
Rotary - 8560 / 8570 / 8590 / 8780
80"
1-1/4" Hex
•Adapter Plate•Convert to TPS
If equiped with Smart-Trac, Refer to kit 700-0011-ST 1-2 $1,500
19" Female 1-1/4" Hex 14 Series
31" Male 1-1/8" or 1-1/4" Hex 14
Series
Double Drive$600
Custom Build
Please Call
700-0006 john deere
Corn HeadRow HeadCutter BarPlatform
All New HollandTR - 70 / 75 / 76 / 85 / 86 / 87 / 88 / 89 / 96 /
97 / 98 / 99
72"
6 Spline
•Adapter Plate•Convert to TPS
NONE 1-2 $1,250
19" Female 6 Spline 14 / 35
Series
31" Male 1-1/8" or 1-1/4" Hex 14 / 35
Series
Double Drive$600
Custom Build
Please Call
700-0007-N john deere Corn Head40 or 90 Series
8r 30" and Smaller
case
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 9130 / 7230 / 8230 / 9230 / 7240 / 8240 /
9240
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 5088 - 5130-6130
Models4-6 $1,375
1x 19" Female 6 Spline 14 Series
1x 28.75" Female 6 Spline 14 Series
2x 30.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
$1815
Lights Only$175
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0007-N john deere Corn Head40 or 90 Series
8r 30" and Smaller
case
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 5088 - 5130-6130
Models4-6 $1,375
1x 19" Female 6 Spline 14 Series
1x 28.75" Female 6 Spline 14 Series
2x 30.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
$1815
Lights Only$175
700-0007-N john deere Corn Head40 or 90 Series
8r 30" and Smaller
New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
85"(Must Specify)
6 Spline
Shaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 4-6 $1,375
1x 19" Female 6 Spline 14 Series
1x 28.75" Female 6 Spline 14 Series
2x 30.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
Custom Build
Please Call
Lights Only$500
700-0007-N john deere Corn Head40 or 90 Series
8r 30" and Smaller
New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
74"(Must Specify)
6 Spline
Shaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 4-6 $1,375
1x 19" Female 6 Spline 14 Series
1x 28.75" Female 6 Spline 14 Series
2x 30.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
Custom Build
Please Call
Lights Only$500
700-0007-W john deere Corn Head40 or 90 Series
12r 20" and Larger
case
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•Add Stripper Extensions For Xx88 - 5130-6130
Models6-8 $1,995
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
$1815
Lights Only$175
700-0007-W john deere Corn Head40 or 90 Series
12r 20" and Larger
case
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
Add Stripper Extensions For Xx88 - 5130-6130
Models6-8 $1,995
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
$1815
Lights Only$175
700-0007-W john deere Corn Head40 or 90 Series
12r 20" and Larger
New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
85"(Must Specify)
6 Spline
Shaved
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 6-8 $1,995
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
Custom Build
Please Call
Lights Only$500
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0007-W john deere Corn Head40 or 90 Series
12r 20" and Larger
New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
74"(Must Specify)
6 Spline
Shaved
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 6-8 $1,995
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
Custom Build
Please Call
Lights Only$500
700-0007-P-IH john deere Platform 200 or 900 Series
case
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 4-6 $1,675
1x 19" Female 6 Spline 14 Series
1x 28" Female 6 Spline 14 Series
2x 30.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
900F series$250
200 Series$900
700-0007-P-IH john deere Platform 200 or 900 Series
case
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 4-6 $1,675
1x 19" Female 6 Spline 14 Series
1x 28" Female 6 Spline 14 Series
2x 30.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
900F series$250
200 Series$900
700-0007-P-NH john deere Platform 200 or 900 Series New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
85"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 4-6 $1,675
1x 19" Female 6 Spline 14 Series
1x 28" Female 6 Spline 14 Series
2x 30.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
Hydraulic Block$300
$2810
Lights Only$500
700-0007-P-NH john deere Platform 200 or 900 Series New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
74"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
Add Stripper Extensions For 20-40-60 Models 4-6 $3,695
1x 19" Female 6 Spline 14 Series
1x 28" Female 6 Spline 14 Series
2x 30.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Stripper Extentions$100
$2810
Lights Only$500
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0007-6C-IH-E john deere
Corn Head
600 SERIES
Serial # -745100
case
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-8 $3,695
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$325
Double Drive$650
Replacement Feederhouse
Guides$250
Stripper Extentions$100
Hydraulic Block$300
$1815
Lights Only$175
700-0007-6C-IH-E john deere Corn Head
600 SERIES
Serial # -745100
case
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-9 $3,695
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$325
Double Drive$650
Replacement Feederhouse
Guides$250
Stripper Extentions$100
Hydraulic Block$300
$1815
Lights Only$175
700-0007-6C-IH-L john deere Corn Head
600 SERIES
Serial #745101 -
case
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-8 $3,695
Not Typically Necessary
Yoke ChangeAW36 6 Spline
Not Typically Necessary
Replacement Feederhouse
Guides$250
Stripper Extentions$100
Hydraulic Block$300
$1815
Lights Only$175
700-0007-6C-IH-L john deere Corn Head
600 SERIES
Serial # 745101 -
case
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And
24" Wide
•5088-6230 Need To Add Stripper Extensions
6-8 $3,695
Not Typically Necessary
Yoke ChangeAW36 6 Spline
Not Typically Necessary
Replacement Feederhouse
Guides$250
Stripper Extentions$100
Hydraulic Block$300
$1815
Lights Only$175
700-0007-6C-NH-E john deere Corn Head
600 SERIES
Serial # -745100
New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
85"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And
24" Wide
•20-40-60 Models Add Stripper Extensions
6-8 $3,695
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$325
Double Drive$650
Replacement Feederhouse
Guides$250
Stripper Extentions$100
Hydraulic Block$300
$2810
Lights Only$500
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0007-6C-NH-E john deere
Corn Head
600 SERIES
Serial # -745100
New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
74"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And
24" Wide
•20-40-60 Models Add Stripper Extensions
6-8 $3,695
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$325
Double Drive$650
Replacement Feederhouse
Guides$250
Stripper Extentions$100
Hydraulic Block$300
$2810
Lights Only$500
700-0007-6C-NH-L john deere Corn Head
600 SERIES
Serial # 745101 -
New Holland
2013 - CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
85"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS4•" Wedge Kit
On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And
24" Wide20-40-60 Models Add Stripper Extensions
6-8 $3,695
Not Typically Necessary
Yoke ChangeAW36 6 Spline
Shaved
Not Typically Necessary
Replacement Feederhouse
Guides$250
Stripper Extentions$100
Hydraulic Block$300
$2810
Lights Only$500
700-0007-6C-NH-L john deere Corn Head
600 SERIES
Serial #745101 -
New Holland
2013 - CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
74"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•On Heads With Split Augers The Feederhouse Front Channel Has To Be Knotched 1/2" Down And
24" Wide
•20-40-60 Models Add Stripper Extensions
6-8 $3,695
Not Typically Necessary
Yoke ChangeAW36 6 Spline
Shaved
Not Typically Necessary
Replacement Feederhouse
Guides$250
Stripper Extentions$100
Hydraulic Block$300
$2810
Lights Only$500
700-0007-6P-IH-4-30 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
30 Ft or less case
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$325
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
700-0007-6P-IH-4-30 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
30 Ft or less case
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140
85"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$325
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
700-0007-6P-IH-4-35 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
35 Ft or more case
All YearsAFX 7010 / AFX 8010 7120 / 8120 / 9120 / 7230 / 8230 / 9230 / 7240 / 8240 / 9240
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950 Yoke Change
6 Spline Not Typically Necessary
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0007-6P-IH-4-35 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
35 Ft or more case
All Years5088 / 6088 / 7088 / 5130 / 6130 / 7130 / 5140 / 6140 / 7140
72"
6 Spline
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950 Yoke Change
6 Spline Not Typically Necessary
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
700-0007-6P-NH-2-30 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
30 Ft or less New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
85"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$325
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
700-0007-6P-NH-2-30 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
30 Ft or less New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
74"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$325
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
700-0007-6P-NH-2-35 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
35 Ft or more New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
85"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950 Yoke Change
6 Spline ShavedNot Typically Necessary
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0007-6P-NH-2-35 john deere
HyrdaflexPlatform
RigidPlatform
601 SERIES
35 Ft or more New Holland
- to 2013 CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 881
74"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-9 $3,951 Yoke Change
6 Spline ShavedNot Typically Necessary
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
700-0007-6P-NH-4-30 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
30 Ft or less New Holland
2013 -CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
85"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$325
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
700-0007-6P-NH-4-30 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
30 Ft or less New Holland
2013 - CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
74"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$325
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
700-0007-6P-NH-4-35 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
35 Ft or more New Holland
2013 -CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
85"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950 Yoke Change
6 Spline ShavedNot Typically Necessary
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
700-0007-6P-NH-4-35 john deere
HyrdaflexPlatform
RigidPlatform
600 SERIES
35 Ft or more New Holland
2013 -CR 9220 / 9240 / 9260 / 9270 / 9040 / 9060 / 9070 / 9080 / 9090 /
6.90 / 7.90 / 8.90 / 9.90 CX 720 / 740 / 760 /
780 / 8030 / 8040 / 8050 / 8060 / 8070 /
8080 / 8090 / 820 / 840 / 860 / 880
74"(Must Specify)
6 SplineShaved
•Cut & Weld Kit•Relocate TPS•4" Wedge Kit
•5088-6230 Need To Add Stripper Extensions
•Single P.T.O. Drive6-8 $3,950 Yoke Change
6 Spline ShavedNot Typically Necessary
Stripper Extentions$100
Hydraulic Block$350
$2810
Lights Only$500
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0008-N john deere
Corn HeadRow Head 40 or 90 Series lexion
All Years
405-780
Narrow Body
70" 21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,450
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x Male 1-1/8" or 1-1/4" Hex 35 Series
Single Drive:$300
Double Drive$600
Hydraulic Block$3,750
CH / RC$2,035
No Hydraulics$5,550
With Hydraulics
700-0008-N john deere
Corn HeadRow Head 40 or 90 Series lexion
All Years
405-780
Wide Body
80"21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,450
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x Male 1-1/8" or 1-1/4" Hex 35 Series
Single Drive:$300
Double Drive$600
Hydraulic Block$3,750
CH / RC$2,035
No Hydraulics$5,550
With Hydraulics
700-0008-W john deere
Corn HeadRow Head 90 Series lexion
All Years
405-780
Narrow Body
70" 21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,450
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x Male 1-1/8" or 1-1/4" Hex 35 Series
Single Drive:$300
Double Drive$600
Hydraulic Block$3,750
CH / RC$2,035
No Hydraulics$5,550
With Hydraulics
700-0008-W john deere
Corn HeadRow Head 90 Series lexion
All Years
405-780
Wide Body
80"21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,450
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x Male 1-1/8" or 1-1/4" Hex 35 Series
Single Drive:$300
Double Drive$600
Hydraulic Block$3,750
CH / RC$2,035
No Hydraulics$5,550
With Hydraulics
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0008-9P john deere Cutter BarPlatform
200 / 900 Series
lexion
All Years
405-780
Wide Body
80"21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,950
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x Male 1-1/8" or 1-1/4" Hex 35 Series
Single Drive:$300
Double Drive$600
Hydraulic Block$3,750
Platform$6,996
With Hydraulics
700-0008-9P john deere Cutter BarPlatform
200 / 900 Series
lexion
All Years
405-780
Narrow Body
70" 21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,950
1x 28" Female 21 Spline PB Shaved 35 Series On Left
Side
1x 28" Female 21 Spline AL 35
Series On Right Side
2x Male 1-1/8" or 1-1/4" Hex 35 Series
Single Drive:$300
Double Drive$600
Hydraulic Block$3,750
Platform$6,996
With Hydraulics
700-0008-6-E john deere
Corn Head
600 Series
Serial # -745100
lexion
All Years
405-780
Narrow Body
70" 21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,950
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$300
Double Drive$600
Hydraulic Block$3,750
CH / RC$2,035
No Hydraulics$5,550
With Hydraulics
700-0008-6-E john deere
Corn Head
600 Series
Serial # -745100
lexion
All Years
405-780
Wide Body
80"21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,950
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$300
Double Drive$600
Hydraulic Block$3,750
CH / RC$2,035
No Hydraulics$5,550
With Hydraulics
700-0008-6-L john deere
Corn Head600 Series
Serial # 745101-
lexion
All Years
405-780
Wide Body
80"21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,950
Yoke Change
21 Spline Shaved PB on Left
21 Spline AL on Right
Not Typically Necessary
Hydraulic Block$3,750
CH / RC$2,035
No Hydraulics$5,550
With Hydraulics
700-0008-6-L john deere
Corn Head600 Series
Serial # 745101-
lexion
All Years
405-780
Narrow Body
70" 21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,950
Yoke Change
21 Spline Shaved PB on Left
21 Spline AL on Right
Not Typically Necessary
Hydraulic Block$3,750
CH / RC$2,035
No Hydraulics$5,550
With Hydraulics
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0008-6P-30 john deere
Platform
30 Ft or less
600 Series
Serial # -745100745101-
lexion
All Years
405-780
Wide Body
80"21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,950
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$300 Hydraulic Block
$3,750Platform$6,996
With Hydraulics
700-0008-6P-30 john deere
Platform
30 Ft or less
600 Series
Serial # -745100745101-
lexion
All Years
405-780
Narrow Body
70" 21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,950
28" Female 6 Spline 35 Series
31" Male 1-1/8" Hex Male 35
Series or 48" Male 1-1/8" Hex Male 35
Series
Single Drive:$300 Hydraulic Block
$3,750Platform$6,996
With Hydraulics
700-0008-6P-35 john deere
Platform
35 Ft or more
600 Series
Serial # -745100745101-
lexion
All Years
405-780
Wide Body
80"21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,950
Yoke Change
21 Spline Shaved PB on Left
21 Spline AL on Right
Not Typically Necessary
Hydraulic Block$3,750
Platform$6,996
With Hydraulics
700-0008-6P-35 john deere
Platform
35 Ft or more
600 Series
Serial # -745100745101-
lexion
All Years
405-780
Narrow Body
70" 21 SplineShaved
•Cut & Weld Kit•Relocate TPS•2" Wedge Kit
None 7-10 $3,950
Yoke Change
21 Spline Shaved PB on Left
21 Spline AL on Right
Not Typically Necessary
Hydraulic Block$3,750
Platform$6,996
With Hydraulics
700-0009 john deere
Corn HeadRow Head All case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /
2366 / 2388
70"
1-1/8" Hex
•Adapter Plate•Convert to TPS
Cut Backshafts, Install Bearing Kit For Tps (Slip
Clutch Add-On - Cutterbars + $85 Per Side)
3 $1,250
19" Female 1-1/8" Hex 14 / 35 Series
30.38" Male 1-1/8" Hex 14 / 35 Series
Single Drive:$300
Double Drive$600
Hydraulic Block$300
$1815
Lights Only$175
700-0009-P john deere
Cutter BarPlatform All case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /
2366 / 2388
70"
1-1/8" Hex
•Adapter Plate•Convert to TPS
•Install Slip Clutch
Cut Backshafts, Install Bearing Kit For Tps (Slip
Clutch Add-On - Cutterbars + $85 Per Side)
3 $1,250
19" Female 1-1/8" Hex 14 / 35 Series
30.38" Male 1-1/8" Hex 14 / 35 Series
Single Drive:$300
Double Drive$600
$100 Slip Clutch Repo
Hydraulic Block$350
Multiple Options
700-0009-P-35 john deere
Cutter BarPlatform
35 Ft or more
All case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /
2366 / 2388
70"
1-1/8" Hex
•Adapter Plate•Convert to TPS
•Install Slip Clutch
Cut Backshafts, Install Bearing Kit For Tps (Slip
Clutch Add-On - Cutterbars + $85 Per Side)
3 $1,250 Yoke Change1-1/8" Hex
Not Typically Necessary
$100 Slip Clutch Repo
Hydraulic Block$350
Multiple Options
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0009-6D john deere Ridgid Draper 600 Series case
All Years1420 / 1440 / 1460 / 1470 / 1480 / 1482
1620 / 1640 / 1644 / 1660 / 1666 / 1670 / 1680 / 1688 / 2144 / 2166 / 2188 / 2344 /
2366 / 2388
70"
1-1/8" Hex
•Adapter Plate•Shaft Change
Cut Backshafts, Install Bearing Kit For Tps (Slip
Clutch Add-On - Cutterbars + $85 Per Side)
3 $1,500
19" Female 1-1/8" Hex 14 / 35 Series
30.38" Male 1-1/8" Hex 14 / 35 Series
Single DriveShaft Only
$100 Slip Clutch Repo
Hydraulic Block$350
Custom Build
Please Call
Lights Only$175
700-0011-C john deere
Corn HeadRow HeadCutter BarPlatform
All gleaner
R Series - 40 / 42 / 52 / 62 / 72 / 75 / R5 / R6
/ R7
70"
21 Spline
•Adapter Plate•Convert to TPS
• Centers Head with Wheels •Must Be Level
Land Feederhouse.
• If equiped with Smart-Trac, Refer to kit 700-0011-
ST
3 $1,725
28" Female 21 Spline 14 / 35 Series on Left
31" Male 1-1/8" or 1/1/4 Hex 14 / 35
Series on Left
19" Female 21 Spline 14 / 35
Series on Right
21" Male 1-1/8" or 1-1/4" Hex 14 / 35
Series on Right
Single Drive:$300
Double Drive$600
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
700-0011-O john deere
Corn HeadRow HeadCutter BarPlatform
All gleaner
R Series - 40 / 42 / 52 / 62 / 72 / 75 / R5 / R6
/ R7
70"
21 Spline
•Adapter Plate•Convert to TPS
• Centers Head with Feederhouse
• If equiped with Smart-Trac, Refer to kit 700-0011-
ST
1-2 $1,725
28" Female 21 Spline 14 / 35 Series on Left
31" Male 1-1/8" or 1/1/4 Hex 14 / 35
Series on Left
19" Female 21 Spline 14 / 35
Series on Right
21" Male 1-1/8" or 1-1/4" Hex 14 / 35
Series on Right
Single Drive:$300
Double Drive$600
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
700-0120 john deere
Corn HeadRow HeadCutter BarPlatform
All gleaner
Black Feederhouse
A65 / A66 / A75 / A76 / A85 / A86 / C62
90"
21 Spline
•Adapter Plate•Convert to TPS
For Level Land Only. If equiped with Smart-Trac,
Head needs to be modified.
1-2 $1,500
19" Female 21 Spline 14 Series
25.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
700-0120 john deere
Corn HeadRow HeadCutter BarPlatform
All Massey
Black Feederhouse 9520 / 9530 / 9540 / 9545 / 9550 / 9560 / 9565 - Conventional 9690 / 9695 / 9720 / 9790 / 9795 / 9895
90"
21 Spline
•Adapter Plate•Convert to TPS
For Level Land Only. If equiped with Smart-Trac,
Head needs to be modified.
1-2 $1,500
19" Female 21 Spline 14 Series
25.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0120 john deere
Corn HeadRow HeadCutter BarPlatform
All challanger
520C / 540C / 550C / 560C / 540E / 660 / 660B / 670 / 670B /
680B
90" •Adapter Plate•Convert to TPS
For Level Land Only. If equiped with Smart-Trac,
Head needs to be modified.
1-2 $1,500
19" Female 21 Spline 14 Series
25.38" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
700-0011ST john deere
Corn HeadRow HeadCutter BarPlatform
All Massey
Red Feederhouse
Rotary - 8780 / 8780XP
90"
1-1/4" Hex
•Relocate Top Toolbar
•Wedge
If equiped with Smart-Trac, Head needs to be
modified.30 $6,500
Including Labor
19" Female 1-1/4" Hex 14 Series
21" Male 1-1/8" or 1-1/4" Hex 14
Series
Single Drive:$300
Double Drive$600
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
700-0011ST john deere
Corn HeadRow HeadCutter BarPlatform
All gleaner
A Series - A65 / A66 / A75 / A76 / A85 / A86 /
C62
90"
21 Spline
•Relocate Top Toolbar
•Wedge
If equiped with Smart-Trac, Head needs to be
modified.30 $6,500
Including Labor
19" Female 21 Spline 14 Series
21" Male 1-1/8" or 1-1/4" Hex 14
Series
Single Drive:$300
Double Drive$600
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
700-0011ST john deere
Corn HeadRow HeadCutter BarPlatform
All gleaner
S Series - S67 / S68 / S77 / S78 / S87 / S88 /
S96 / S97 / S98
90"
21 Spline
•Relocate Top Toolbar
•Wedge
If equiped with Smart-Trac, Head needs to be
modified.30 $6,500
Including Labor
1x 28 Female 21 Spline 14 Series
on Left
1x 31" Male 1-1/8" or 1-1/4" Hex 14 Series on Right
1x 19" Female 21 Spline 14 Series
on Right
1x 21" Male 1-1/8" or 1-1/4" Hex on
Right
Single Drive:$300
Double Drive$600
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
700-0011ST john deere
Corn HeadRow HeadCutter BarPlatform
All challanger
A Series - A65 / A66 / A75 / A76 / A85 / A86 /
C6290"
21 Spline
•Relocate Top Toolbar
•Wedge
If equiped with Smart-Trac, Head needs to be
modified.31 $6,500
Including Labor
19" Female 21 Spline 14 Series
21" Male 1-1/8" or 1-1/4" Hex 14
Series
Single Drive:$300
Double Drive$600
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
700-0014 john deere
Corn HeadRow Head All gleaner L M L2 M2 L3 M3
72"
21 Spline
•Adapter Plate•Convert to TPS
If equiped with Smart-Trac, Head needs to be
modified.3 $1,750
19" Female 21 Spline 14 Series / 30.38" Male 1-1/8" Hex On Left Side
28.63 Female 21 Spline 14 Series / 30.38" Male 1-1/8" Hex On Right Side
Single Drive:$300
Double Drive$600
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0014-P john deere
Cutter BarPlatform All gleaner L M L2 M2 L3 M3
72"
21 Spline
•Adapter Plate•Convert to TPS
If equiped with Smart-Trac, Head needs to be
modified.2-5 $1,750
19" Female 21 Spline 14 Series / 30.38" Male 1-1/8" Hex On Left Side
28.63 Female 21 Spline 14 Series / 30.38" Male 1-1/8" Hex On Right Side
Single Drive:$300
Double Drive$600
Hydraulic Pump For Platform
Available Through Gleaner
Custom Build
Please Call
Lights Only$175
700-0016 john deere
Corn HeadRow Head All gleaner
GLEANER K / E(Level-land Only)
•Adapter Plate May Need Right Hand Drive Sprocket 1-2 $1,595 Not Typically
NecessaryNot Typically Necessary
RH Drive Sprocet / Hub$55
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
700-0017 john deere
Corn HeadRow Head All gleaner
GLEANER F F2 F3(Level-land Only)
•Adapter Plate•Chain Drive
Late F2 May Need Upper Feederhouse Brackets
And Latch Bar (Get From Gleaner Dealer)
1-2 $1,595 Not Typically Necessary
Not Typically Necessary
Hydraulic Blocks Available Through
Agco Dealer
Custom Build
Please Call
Lights Only$175
700-0024 john deere
Corn HeadRow Head All oxbo BYRON
80"
21 Spline
•Adapter Plate•Convert to TPS
None 1-2 $1,785
28" Female 21 Spline 35 Series
31" Male 1-1/8" or 1-1/4" Hex 35
Series
Single Drive:$300
Double Drive$600
Custom Build
Please Call
Lights Only$175
700-0025 john deere
Corn HeadRow Head All oxbo PIXAL
80"
21 Spline
•Adapter Plate•Convert to TPS
None 1-2 $1,785
28" Female 21 Spline 35 Series
31" Male 1-1/8" or 1-1/4" Hex 35
Series
Single Drive:$300
Double Drive$600
Custom Build
Please Call
Lights Only$175
700-0027-LL Case IH
Cornheads Only
800 - 900 - 1000 Series
OnlyJohn Deere
All Years4400 - 9650Level Land
Feederhouses
83.69"
21 Spline(Must Specify)
•Bolt in pieces •Remove Feederhouse Chain Cover 2-4
$1,75019" Female 21
Spline 14 Series
21" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Custom Build
Please Call
Lights Only$175
700-0027-CM Case IH
Cornheads Only
800 - 900 - 1000 Series
OnlyJohn Deere
All Years9600 - S Series Contour Master Feederhouses
83.69"
21 Spline(Must Specify)
•Bolt in pieces •Remove Feederhouse Chain Cover 2-4
$1,75019" Female 21
Spline 14 Series
21" Male 1-1/8" Hex 14 Series
Single Drive:$300
Double Drive$600
Custom Build
Please Call
Lights Only$175
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
700-0270 Case IH
Cornheads Only
22 - 3400 Series
John Deere
All Years4400 - 9760 / 7700 /
8800 / S / Series Level Land or Contour
Master Feederhouses
83.69"
21 Spline(Must Specify)
•Requires Hooks on Feederhouse
•Bolt in pieces
•Move or Remove Gearbox, Install Bearing Holder & Change TPS
•New Backshafts Can Be Provided @ an Additional
Cost
2-4$1,995
2x 27-31" Male 1-1/4
Hex Shafts
Single Drive:$300
Double Drive$600
Hydraulic Block
Custom Build
Please Call
Lights Only$175
700-0271 Case IH
Chopping Cornheads
Only
Case 2600 & 4400 Series
John Deere
All Years4400 - 9760 / 7700 /
8800 / S / Series Level Land or Contour
Master Feederhouses
83.69"
21 Spline(Must Specify)
•Requires Hooks on Feederhouse
•Bolt in pieces
•Verify Backshaft Diameter: 1-1/8" Hex or
30mm are options
•Stub shafts are best option if customer will
approve
3-5$1,995 Already has long
drive shafts, just needs yoke changes.
Already has long drive shafts, just
needs yoke changes.
John Deere Hydraulic Block
Storage Bracket
Stub Shaft
Yoke Change
Custom Build
Please Call
Lights Only$175
700-0270 New Holland
Corn Heads Only 98C John Deere
All Years4400 - 9760 / 7700 /
8800 / S / Series Level Land or Contour
Master Feederhouses
83.69"
21 Spline(Must Specify)
•Has to have hooks on
feederhouse
•Relocate TPS
•Move or remove gearbox, •Install bearing holder &
change TPS (New backshafts can be
provided at additional cost)
3-5$1,995
2x 27-31" Male 1-1/4
Hex Shafts
Single Drive:$300
Double Drive$600
Hydraulic Block$3,750
Custom Build
Please Call
Lights Only$175
700-0271 New Holland
Cornheads Only 99C & 980CR John Deere
All Years4400 - 9760 / 7700 /
8800 / S / Series Level Land or Contour
Master Feederhouses
83.69"
21 Spline(Must Specify)
•Adapter Plate •Change TPS
•Verify Backshaft Diameter: 1-1/8" Hex or
30mm are options
•Stub shafts are best option if customer will
approve
3-5$1,995
2x 27-31" Male 1-1/4
Hex Shafts
Single Drive:$300
Double Drive$600
Hydraulic Block$450
Not Available
Lights Only$175
700-0060 Gleaner Corn Head 3000 Series John Deere
All Years4400 - 9760 / 7700 /
8800 / S / Series Level Land
83.69"
21 Spline(Must Specify)
•Adapter Plate •Convert to TPS
Remove all Gleaner componets from
feederhouse & bolt in John Deere adapter
2-3$1,250 Not Provided From
Bish EnterprisesNot Provided From Bish Enterprises
Hydraulic Block $450
Custom Build
Please Call
Lights Only$175
700-0060 Massey Corn Head 3000 Series John Deere
All Years4400 - 9760 / 7700 /
8800 / S / Series Level Land
83.69"
21 Spline(Must Specify)
•Adapter Plate •Convert to TPS
Remove all Gleaner componets from
feederhouse & bolt in John Deere adapter
2-3$1,250 Not Provided From
Bish EnterprisesNot Provided From Bish Enterprises
Hydraulic Block $450
Custom Build
Please Call
Lights Only$175
700-0060 Challanger Corn Head 3000 Series John Deere
All Years4400 - 9760 / 7700 /
8800 / S / Series Level Land
83.69"
21 Spline(Must Specify)
•Adapter Plate •Convert to TPS
Remove all Gleaner componets from
feederhouse & bolt in John Deere adapter
2-3$1,250 Not Provided From
Bish EnterprisesNot Provided From Bish Enterprises
Hydraulic Block $450
Custom Build
Please Call
Lights Only$175
PART # Header Manufacturer
TYPE OF HEAD
Header Model #
YearSerial #
Combine Manufacturer
CombineModel #'s
Feederhouse Shaft Length /
Shaft Type
Conversion Type
Additional Informtion
Installation Time
(Hours)
HeaderConversion
Components
TelescopicPower Shafts
Contact Bish Enterprises For Pricing (Series Options Vary)
Bearing Support Kit (No T.P.S.)
Additional Components
Needed
Headsisght®Height
Conversion (Sensor)
*Prices listed are subject to cahnge without notice. Contact Bish Enterprises for Current Pricing. www. bishenterprise.com**Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterises for dealer or bulk pricing information.***Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
750-5060 Gleaner Stripper Head 6000 John Deere
4400 - S680 Level Land or Contour
Master
83.69"
21 Spline(Must Specify)
•Adapter Plate
Remove all Gleaner componets from feeder house & bolt in adapter -
you will also have a bolt on yoke, hyd block, & hose needed for conversion
2-3 $3,105 Yoke Change
21 Spline
Typically Not Necesarry
Yoke Changes
Hydraulic Block$450
Custom Build
Please Call
Lights Only$175
700-9250-JD50/60 Gleaner
Dyna-Flex Draper 9250 John Deere
Serial # 720301 - - 720300
4400 - 9860 Level Land or Contour
Master
83.69"
21 Spline(Must Specify)
•Adapter Plate •Change Yoke
60 Series combines: We need to ask if the combine
has a metal or plastic shroud
5-6 $3,500 Typically Not Necesarry
Typically Not Necesarry
Single Yoke Change
Electrical Kit Needed
Hydraulic Block $450
$2830
700-9250JD Gleaner
Dyna-Flex Draper 9250 John Deere
4400 - 9860 Level Land or Contour
Master
83.69"
21 Spline(Must Specify)
•Adapter Plate •Change Yoke
60 Series combines: We need to ask if the combine
has a metal or plastic shroud
5-6$3,500 Typically Not
NecesarryTypically Not Necesarry
Single Yoke Change
Electrical Kit Needed
Hydraulic Block $450
$2830
700-0046 Massey Corn Head John Deere
4400-9650 Level Land FH Only
83.69"
21 Spline(Must Specify)
•Adapter Plate •Convert to TPS
•Cut hooks off head
•Weld adapter to FH opening in head
3-5 $1,295 Please Call To Inquire
Please Call To Inquire
Hydraulic Block $450
Custom Build
Please Call
Lights Only$175
700-9250JD Massey
Dyna-Flex Draper 9250 John Deere
Serial # -720300720301 -
4400-9850 Level Land or Contour Master
83.69"
21 Spline(Must Specify)
•Adapter Plate •Change Yoke
60 series combines: We need to ask if the combine
has a metal or plastic shroud
5-6
$3,500
$3,705 for early serial #
Typically Not Necesarry
Typically Not Necesarry
Single Yoke Change
Electricl Kit Needed
Hydraulic Block $450
$2830
700-9250-JD5060 Massey
Dyna-Flex Draper 9250 John Deere
Serial # -720300720301 -
4400-9850 Level Land or Contour Master
83.69"
21 Spline(Must Specify)
•Adapter Plate •Change Yoke
61 series combines: We need to ask if the combine
has a metal or plastic shroud
5-6
$3,705
$3,705 for early serial #
Typically Not Necesarry
Typically Not Necesarry
Single Yoke Change
Electricl Kit Needed
Hydraulic Block $450
$2830
1 | P a g e 2 0 1 6
Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.
508 South D Road - Giltner, NE 68841 61025180 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com
Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
Part # Item Price Price
Including Shafts
500-0200 John Deere 900 Series Cutterbar Upright Kit
Double Drive $600.00 $1,350.00
31" TPS
500-0204 John Deere 200 Series Cutterbar Upright Kit
Double Drive $600.00 $1,350.00
31" TPS
500-0206 John Deere 900 Series Cutterbar Upright Kit
Double Drive $600.00 $1,350.00
31" TPS
500-0208 John Deere 544, 594, 643, 693
Double Drive $600.00 $1,350.00
31" TPS
500-0210 John Deere 443, 444, 493
Double Drive $600.00 $1,350.00
31" TPS
500-0211 John Deere 443, 444, 493
Single Drive $300.00 $650.00
31" TPS
500-0212 John Deere 443, 493, 444, 494, 643, 644, 653, 653A, 654,
654A, 693, 694, 843, 853A, 893 Double Drive
$600.00 $1,350.00 31" TPS
500-0214 John Deere 844, 854, 854A, 894, 1243, 1253A, 1290, 1293
Double Drive $600.00 $1,350.00
31" TPS
500-0214-HD
John Deere 844, 854, 854A, 894, 1243, 1253A, 1290, 1293 Double Drive with Heavy Duty Drivelines
- $1,600.00 31" TPS
500-0216 John Deere 843, 893
Double Drive $600.00 $1,350.00
31" TPS
500-0218 John Deere 844, 894, 1243, 1293, 1244, 1294
Double Drive $600.00 $1,350.00
31" TPS
500-0220 John Deere 844, 894, 1243, 1293, 1244, 1294
Double Drive with Heavy Duty Drivelines $1,600.00 $1,600.00
31" TPS
2 | P a g e 2 0 1 6
Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.
508 South D Road - Giltner, NE 68841 61025180 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com
Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
Part # Item Price Price
Including Shafts
500-0222 John Deere 600 Series Upright Kit
Single Drive $325.00 $675.00
31" TPS
500-0221 John Deere 600 Series Upright Kit
Double Drive $650.00 $1,350.00
31" TPS
500-0221 John Deere 600 Series Upright Kit
Double Drive with Heavy Duty Drivelines - $1,700.00
31" TPS
500-0221 John Deere 600 Series Upright Kit
Double Drive with Long Heavy Duty Drivelines -
$2,000.00 Long HD
TPS
1 | P a g e 2 0 1 6
Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.
508 South D Road - Giltner, NE 68841 61021380 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com
Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
Part # Item Price
Complete Telescoping Power Shafts (Complete Male and Female Shaft with Yoke)
505-XXXX 14 Series Single T.P.S ( 18" - 31") $300.00
505-XXXX 14 Series Single T.P.S ( 31" - 60") $350.00
505-XXXX 35 Series Single T.P.S ( 18" - 31") $450.00
505-XXXX 35 Series Single T.P.S ( 31" - 40") $475.00
505-XXXX 35 Series Single T.P.S ( 41" - 60") $500.00
505-XXXX 44 Series Single T.P.S ( 18" - 31") $525.00
505-XXXX 44 Series Single T.P.S ( 31" - 40") $600.00
505-XXXX 44 Series Single T.P.S ( 41" - 60") $750.00
505-XXXX AW36 Series Single T.P.S ( 31" - 40") $550.00
505-XXXX AW36 Series Single T.P.S ( 41" - 60") $750.00
505-6002 F 505-6003 M John Deere® Contour Master Shafts $400.00
505-6002-R F 505-6003-R M John Deere® Contour Master Shafts (Refurbished) $300.00
505-6010-R F 505-6011-F M OEM Case® Drive-line For Case Field Tracker (Refurbished) $600.00
505-3010 Case® Drive-line for 700-0270 & 700-0375 Kit $500.00
Yokes & Cross Kits 506-1014 14 Series Cross Kit $35.00
506-XXXX 14 Series Replacement Yoke $75.00
506-1035 35 Series Cross Kit $37.50
506-XXXX 35 Series Replacement Yoke $85.00
506-1044 44 Series Cross Kit $47.50
506-XXXX 44 Series Yoke $90.00
506-1135 AW-35 Cross Kit $37.50
506-XXXX AW-35 Yoke $85.00
506-1236 AW-36 Cross Kit $47.50
1 | P a g e 2 0 1 6
Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.
508 South D Road - Giltner, NE 68841 61021380 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com
Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
Part # Item Price
Stub Adapter
507-1001 1-1/2" Hex Female x 1-1/4" Hex Male $85.00
507-1004 1-1/2" Round Female x 1-1/8" Hex Male $85.00
507-1007 1-1/4" Hex Female x 1-1/4" Hex Male $85.00
507-1010 1-1/4" Hex Female x 1-1/8" Hex Male $85.00
507-1013 1-1/8" Hex Female to 1-3/8" 6 Spline Male $85.00
507-1016 1-1/8" Hex Female x 1-1/4" Hex Male $85.00
507-1019 1-1/8" Hex Female x 1-3/8" 21 Spline Male $85.00
507-1022 1-1/8" Hex Male x 1-1/8" Hex Male $85.00
507-1025 1-3/8" 21 Spline Female x 1-1/4" Hex Male $85.00
507-1028 1-3/8" 21 Spline Female x 1-1/8" Hex Male $85.00
507-1031 1-3/8" 21 Spline Female x 6 Spline Male $85.00
507-1034 1-3/8" 21 Spline QT Female x 1-1/8" Hex Male $85.00
507-1037 1-3/8" 6 Spline Female x 1-1/8" Hex Male $85.00
507-1040 1-3/8" 6 Spline Female x 1-3/8" 21 Spline Male $85.00
Part # Item Price
Repositioning Adapters 507-1101 1-1/8" Hex x 10" $85.00
507-1104 1-1/8" Hex x 4" $85.00
507-1107 1-3/8" 21 Spline x 3 1/2" Turned $85.00
507-1110 1-3/8" 21 Spline x 4" $85.00
507-1113 1-3/8" 6 Spline x 3 1/2" Turned $85.00
507-1116 1-3/8" 6 Spline x 4" $85.00
507-1119 4 Bolt Round Hub $85.00
507-1122 Tapered Hub $85.00
2 | P a g e 2 0 1 6
Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.
508 South D Road - Giltner, NE 68841 61021380 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com
Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
Part # Item Price
Couplers 507-1201 1" Hex Coupler (with Set Screws) $65.00
507-1204 1-1/8 Hex Coupler (with Set Screws) $65.00
507-1207 1-1/4 Hex Coupler (with Set Screws) $85.00
507-1210 1-3/8 Hex Coupler (with Set Screws) $95.00
507-1213 1-1/2 Hex Coupler (with Set Screws) $100.00
507-1216 Pipe Sleeve for 1-1/4" Shaft (Weld On) $30.00
Part # Item Price
Short Hex Shafts Threaded 1" Hex Shafting (Per foot) 3+ ft. $18.00
Threaded 1-1/8" Hex Shafting (Per foot) 3+ ft. $18.75
Threaded 1-1/4" Hex Shafting (Per foot) 3+ ft. $21.00
Threaded 1-1/2" Hex Shafting (Per foot) 3+ ft. $25.00
503-4001 6-1/4" Hex Shaft - Non-Threaded (Bolt-on Collar) $65.00
503-4005 8-3/4" Hex Shaft - Threaded (with Lock Collar) $100.00
503-4002 8" Hex Shaft - Non-Threaded (Bolt-on Collar) $100.00
503-4004 8" Hex Shaft - Threaded (with Lock Collar) $100.00
503-4006 10" Hex Shaft - Threaded (with Lock Collar) $100.00
503-4003 10" Hex Shaft - Non-Threaded (Bolt-on Collar) $100.00
503-4009 18" Hex Shaft - Threaded (with Lock Collar) $125.00
1 | P a g e 2 0 1 6
Prices listed are subject to change without notice. Contact Bish Enterprises for Current Pricing. www.bishenterprise.com Prices shown are list price and do not reflect any promotional, bulk, or dealer pricing. Contact Bish Enterprises for dealer or bulk pricing information.
508 South D Road - Giltner, NE 68841 61021380 (402) 849-2674 Office - www.bishenterprise.com - email@bishcom.com
Bish Enterprises is a privately owned company and is not affiliated with or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®, in any way or form. The terms “Agco”, “Case IH”, “CAT”, “Claas/Lexion”, “Gleaner”, “John Deere” or “Deere & Company”, “Massey”, “New Holland”, or “Shelbourne Reynolds” and any images of Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds® equipment are for descriptive purposes only and in no way infer or imply that any part or accessory sold by Bish Enterprises or advertised on this website is manufactured, sold, or endorsed by Agco, Case IH®, CAT®, Claas/Lexion®, Gleaner®, John Deere® or Deere & Company, Massey®, New Holland®, or Shelbourne Reynolds®.
PART # Item Price
908-2001
Bish Feeder House Hooks (Converts Bump to 60 Series Hook) - Pair
John Deere 20 Series Combine (1/2" x 1-3/4" with Flange Nut)
$550.00
908-2004
Bish Feeder House Hooks (Converts Bump to 60 Series Hook) - Pair
John Deere 50 Series Combine Serial # Prior to - 686329 (M12 x 50mm)
$550.00
908-2007
Bish Feederhouse Hooks (Converts Bump to 60 Series Hook) - Pair
John Deere 50 Series Combine Serial # 686330 - Current (M16 x 60mm)
$550.00
908-LAN84212/213K
Contour-Master™ retro fit tilt frame for pre 60 Series narrow body combines $2,550.00
908-LAN84212K Contour-Master™ retro fit tilt frame for pre 60 Series wide
body combines $2,142.00
908-LAN84214-N Level land feeder house hook and deflector kit for pre 60
Series narrow body combines $525.00
908-LAN84214-W Level land feeder house hook and deflector kit for pre 60
Series wide body combines $525.00
908-LAN101050S Heavy Duty, Feeder House Lift Cylinders Kit
For John Deere® 50 Series STS combines only $2,175.00
908-LAN10107 Heavy Duty, Feeder House Lift Cylinders Kit For John Deere® 60 & 70 Series combines $2,325.00
top related