JBI User's Guide - Welcome to Apache ServiceMix!

JBI Users Guide

Apache ServiceMixVersion 442

1 Introduction to JBI

11 What is JBI

TODO Describe what the JBI specification is all about

12 Message Exchange Patterns

TODO Describe the four standard JBI MEPs

13 JBI API

TODO Describe the standard JBI API (MessageExchange NormalizedMessage )

Apache ServiceMix 442

2 JBI Components

21 servicemix-bean

Overview

The ServiceMix Bean component provides integration with beans (POJOs) with the JBI bus to make iteasy to use POJOs to process JBI message exchanges Like in an Message Driven Bean in J2EE a POJOwill receive a message from the NMR and process it in any way it likes Unlike in a JMS componentwhere the coding is already done the Bean component gives the developer the freedom to create anytype of message handling but it must be hand coded all the way

Namespace and xbeanxml

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgbean10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnsbean=httpservicemixapacheorgbean10gtgtltbeanendpointltbeanendpoint service=testservice endpoint=endpoint bean=listenerBeangtgtltbeanltbean id=listenerBean class=orgapacheservicemixbeanbeansListenerBeangtgt

ltbeansgtltbeansgtltbeansgtltbeansgt

Endpoint types

The servicemix-bean component only defines one endpoint called beanendpoint It can be usedto receive and send message exchanges fromto the NMR

Endpoint beanendpoint

There are two ways to configure the bean endpoint The first is using the fully qualified name of theclass and the second is by passing to the endpoint a reference to an existing bean

Using a Java class

When definining a beanendpoint specifying a Java class name a new instance of this class will becreated for handling a single message exchange

ltbeansltbeans xmlnsbean=httpservicemixapacheorgbean10xmlnsmy=urnorgservicmixdocsexamplesgtgt

ltbeanendpointltbeanendpoint service=myservice endpoint=endpointclass=orgapacheservicemixdocsbeanMyHandlerBeangtgt

ltbeansgtltbeansgt

Using a spring bean

Alternative a reference to an existing bean can be passed to the bean endpoint

ltbeansgtltbeansgt

Attention The Bean Endpoint schema allows to set a Bean or a Bean Name The Bean will create asingle instance of the POJO per endpoint whereas the Bean Name will create an instance per request(message exchange)

Endpoint properties

Property Name Type Description

applicationContext orgspringframeworkcontextApplicationContext

Set the SpringApplicationContextwhere the bean canbe found Defaultsto the contextdefined inxbeanxml

bean javalangObjectSet the bean to beused for handlingexchanges

beanClassName javalangString

Set the bean classname to be usedfor handlingexchanges A newinstance will becreated on the flyfor every exchange

beanInfo orgapacheservicemixbeansupportBeanInfo

Set a custom beaninfo object todefine the bean tobe used forhandlingexchanges

beanName javalangString

Set the name of thebean in theapplication contextto be used forhandlingexchanges

beanType javalangClass

Set the bean classto be used forhandlingexchanges A newinstance will becreated on the flyfor every exchange

component orgapacheservicemixbeanBeanComponent

correlationExpression orgapacheservicemixexpressionExpression

Set a customexpression to usefor correlatingexchanges into asingle requesthandled by thesame beaninstance Thedefault expressionuses a correlation

ID set on theexchangeproperties

endpoint javalangString The name of theendpoint

interfaceName javaxxmlnamespaceQName

The qualified nameof the interfaceexposed by theendpoint

methodInvocationStrategy orgapacheservicemixbeansupportMethodInvocationStrategy

Set a custominvocation strategyto define how thebean is beinginvoked Thedefaultimplementationtakes someadditionalparameterannotations intoaccount

service javaxxmlnamespaceQNameThe qualified nameof the service theendpoint exposes

serviceEndpoint javaxjbiservicedescServiceEndpoint

MessageExchangeListener

The first kind of POJOs you can deploy implement the MessageExchagneListener interface In sucha case servicemix-bean acts as a replacement of the lightweight container component This leveloffers the most control on the exchange received and sent This is usually used with the injectedDeliveryChannel to send back the exchanges or if the POJOs needs to act as a consumer (iecreating and sending exchanges to other services)

These POJOs are low-level POJOs you need to understand the JBI Api and Message ExchangePatterns to correctly handle incoming exchanges

Note that at this point (v 31) there is no base class that you can inherit to speed you in this processof implementing a POJO to handle JBI exchanges but hopefully it will come in the future

Examples

This example on the right shows the most simple bean When it receives an exchange it will print itto the console and set the status to DONE before sending the exchange back This bean can nothandle InOut exchanges as it does not set any response (an exception would be thrown in such acase)

importimport orgapacheservicemixjbilistenerMessageExchangeListener

importimport javaxannotationResourceimportimport javaxjbimessagingDeliveryChannelimportimport javaxjbimessagingExchangeStatusimportimport javaxjbimessagingMessageExchangeimportimport javaxjbimessagingMessagingException

publicpublic classclass ListenerBean implementsimplements MessageExchangeListener

Resourceprivateprivate DeliveryChannel channel

publicpublic voidvoid onMessageExchange(MessageExchange exchange) throwsthrows MessagingException Systemoutprintln(Received exchange + exchange)exchangesetStatus(ExchangeStatusDONE)channelsend(exchange)

This example will handle an InOut exchange and will send back the input as the responseNote that this example would fail if receiving an InOnly exchange as setting a response on anInOnly exchange is not a legal operation

importimport orgapacheservicemixjbilistenerMessageExchangeListenerimportimport orgapacheservicemixjbiutilMessageUtil

publicpublic voidvoid onMessageExchange(MessageExchange exchange) throwsthrows MessagingException ifif (exchangegetStatus() == ExchangeStatusACTIVE)

MessageUtiltransferInToOut(exchange exchange)channelsend(exchange)

This is similar example as the one from above (also works only for InOut exchange) but it showshow you can extract message from an exchange in order to process it and send back

importimport orgapacheservicemixjbilistenerMessageExchangeListenerimportimport orgapacheservicemixjbiutilMessageUtilimportimport orgapacheservicemixjbijaxpSourceTransformer

importimport javaxannotationResourceimportimport javaxjbimessagingDeliveryChannelimportimport javaxjbimessagingExchangeStatusimportimport javaxjbimessagingMessageExchangeimportimport javaxjbimessagingMessagingExceptionimportimport javaxjbimessagingNormalizedMessageimportimport javaxxmltransformSource

NormalizedMessage message = exchangegetMessage(in)Source content = messagegetContent()process content according to your logiceg to access the message body as a String useString body = (newnew SourceTransformer())toString(content)

messagesetContent(content)exchangesetMessage(message out)channelsend(exchange)

Disclaimer

In versions 31 to 312 the ServiceMix Bean component will not handle asynchronous messagescorrectly because the final send of the message marked as DONE back to the NMR will be handled asa consumer message and that fails because there is no corresponding provider message The onlyworkaround is to send the messages synchronously

Note This was resolved in 313 32x and later via SM-1110

MessageExchange dispatching

If the POJO deployed implements the orgapacheservicemixMessageExchangeListener everymessage received for this POJO will be dispatched to the onMessageExchange method

In other cases exchanges in a provider role will be dispatched according to theMethodInvocationStrategy configured on the endpoint The default one try to find the methodaccording to the operation name defined on the exchange If there is only a single method acting asan operation it will always be used

Annotations

The servicemix-bean component can accept different kind of POJOs These POJOs may beannotated to customize their behavior All the following annotations belong to theorgapacheservicemixbean package

Annotation Target Description

Callback Method

Content Parameter

Correlation Type

Endpoint TypeThis annotation is mandatory if the bean is automatically searched from a list ofpackages

ExchangeTarget Field

Operation Method

Property Parameter

XPath Parameter

In addition standard annotations can be used

Resource Field

The Resource annotation marks a resource that is needed by the application Currentlythis annotation is only supported on fields of type ComponentContext andDeliveryChannel The component will inject the specified resource when the POJO isinstantiated

PostConstruct MethodThe PostConstruct annotation is used on a method that needs to be executed afterdependency injection is done to perform any initialization

PreDestroy MethodThe PreDestroy annotation is used on methods as a callback notification to signal thatthe instance is in the process of being removed by the container

The following interfaces are part of this API

Interface Description

MessageExchangeListenerWhen the POJO implements this interface all exchanges will be dispatched to theonMessageExchange method

Destination

This interface can be used to define a property on the bean annotated with theExchangeTarget annotation This is a very simple API to send exchanges from aPOJO More complex use cases can use an injected DeliveryChannel directly or tocreate a ServiceMix client

More Examples

bull AnnotatedBean

bull AutoDeployedBean

bull ConsumerBean

bull ListenerBean

bull PlainBean

22 servicemix-camel

Overview

The servicemix-camel component provides support for using Apache Camel to provide a full set ofEnterprise Integration Patterns and flexible routing and transformation in both Java code or SpringXML to route services on the Normalized Message Router

Namespace and camel-contextxml

When creating a servicemix-camel service unit we reuse the default Camel namespacehttpcamelapacheorgschemaspring

This is an example camel-contextxml which uses the Spring DSL to define the Camel routes

ltxml version=10 encoding=UTF-8gtltbeansltbeans xmlns=httpwwwspringframeworkorgschemabeans

xmlnsxsi=httpwwww3org2001XMLSchema-instancexsischemaLocation=

httpwwwspringframeworkorgschemabeanshttpwwwspringframeworkorgschemabeansspring-beans-20xsd

httpcamelapacheorgschemaspringhttpcamelapacheorgschemaspringcamel-springxsdgtgt

ltcamelContextltcamelContext xmlns=httpcamelapacheorgschemaspringgtgtltroutegtltroutegt

lt-- route defined in the Spring DSL --gtltroutegtltroutegt

ltcamelContextgtltcamelContextgt

ltbeansgtltbeansgt

It is also possible to use the Java DSL inside a servicemix-camel service unit by referring to thepackage that contains the RouteBuilder classes An example this camel-contextxml file willactivate all routes defined by RouteBuilders in the orgapacheservicemixexamplecamelpackage

ltcamelContextltcamelContext xmlns=httpcamelapacheorgschemaspringgtgtltpackagesgtltpackagesgtorgapacheservicemixexamplescamelltpackagesgtltpackagesgt

ltbeansgtltbeansgt

Camel routes use URIs to interact with the ESB You can use these URIs to expose new endpoints onthe ESB as well as to send message exchanges to existing endpoints

The snippet below automatically exposes a new endpoint to the bus where the service QName isMyService and the endpoint name is MyEndpoint

from(jbiendpointhttpfoobarorgMyServiceMyEndpoint)

When a JBI endpoint appears at the end of a route as in the example below that will send

to(jbiendpointhttpfoobarorgMyServiceMyEndpoint)

The messages sent by this producer endpoint are sent to the already deployed JBI endpoint

URI format

jbiserviceserviceNamespace[sep]serviceName[options]jbiendpointserviceNamespace[sep]serviceName[sep]endpointName[options]jbinameendpointName[options]

The separator that should be used in the endpoint URL is

bull (forward slash) if serviceNamespace starts with http

bull (colon) if serviceNamespace starts with urn

You can append query options to the URI in the following format option=valueampption=valueamp

Examples

Using jbiservice

jbiservicehttpfoobarorgMyServicejbiserviceurnfoobarMyService

Using jbiendpoint

jbiendpointurnfoobarMyServiceMyEndpointjbiendpointhttpfoobarorgMyServiceMyEndpoint

Using jbiname

When using jbiname the component uses httpactivemqapacheorgcamelschemajbiendpoint as the default Service QName

jbinameMyEndpoint

URI options

Name Default value Description

mepMEP of theCamelExchange

Allows users to override the MEP set on the Exchange object Validvalues for this option are in-only in-out robust-in-out and in-optional-out

operationValue of thejbioperationheader property

Specifies the JBI operation for the MessageExchange If no value issupplied the JBI binding will use the value of the jbioperation headerproperty

serialization basic

Default value (basic) will check if headers are serializable by looking atthe type setting this option to strict will detect objects that can not beserialized although they implement the Serializable interface Set tonocheck to disable this check altogether note that this should only beused for in-memory transports like SEDAFlow otherwise you can expectto get NotSerializableException thrown at runtime

convertException falsefalse send any exceptions thrown from the Camel route backunmodified

true convert all exceptions to a JBI FaultException (can be used to avoidnon-serializable exceptions or to implement generic error handling

Examples

jbiservicehttpfoobarorgMyServicemep=in-out (override the MEP use InOut JBI MessageExchanges)jbiendpointurnfoobarMyServiceMyEndpointmep=in (override the MEP use InOnly JBI MessageExchanges)jbiendpointurnfoobarMyServiceMyEndpointoperation=httpwwwmycompanyorgAddNumbers(overide the operation for the JBI Exchange to httpwwwmycompanyorgAddNumbers)

Example routes

Simple Spring route

This simple Spring route registers a new endpoint on the ESB (service Router endpoint nameorders) The message exchange contents will be logged and then forwarded to another JBI serviceendpoint (service OrderService)

ltbeansltbeans xmlns=httpwwwspringframeworkorgschemabeansxmlnsxsi=httpwwww3org2001XMLSchema-instancexsischemaLocation=

ltcamelContextltcamelContext xmlns=httpcamelapacheorgschemaspringgtgtltroutegtltroutegtltfromltfrom uri=jbiendpointurnorgexampleRouterordersgtgtlttoltto uri=logOrderLogginggtgtlttoltto uri=jbiservicehttpservicesexampleorgOrderService gtgt

ltroutegtltroutegtltcamelContextgtltcamelContextgt

ltbeansgtltbeansgt

The same route using the Java DSL

When we implement the same route in the Java DSL we first code our RouteBuilderimplementation

packagepackage orgapacheservicemixexample

importimport orgapachecamelbuilderRouteBuilder

publicpublic classclass JbiRouteBuilder extendsextends RouteBuilder

Overridepublicpublic voidvoid configure() throwsthrows Exception

from(jbiendpointurnorgexampleRouterorders)to(logOrderLogging)to(jbiservicehttpservicesexampleorgOrderService)

In our camel-contextxml file we just refer to the orgapacheservicemixexample packagethat contains our JbiRouteBuilder

ltcamelContextltcamelContext xmlns=httpcamelapacheorgschemaspringgtgtltroutegtltroutegtltpackageScangtltpackageScangtltpackagegtltpackagegtorgapacheservicemixexampleltpackagegtltpackagegt

ltpackageScangtltpackageScangtltroutegtltroutegt

ltbeansgtltbeansgt

Special considerations

Stream handling

If you are using a stream type as the message body you should be aware that a stream is onlycapable of being read once So if you enable DEBUG logging the body is usually logged and thusread To deal with this Camel has a streamCaching option that can cache the stream enabling youto read it multiple times

from(jbiendpointhttpfoobarorgMyServiceMyEndpoint)streamCaching()to(xslttransformxsl beandoSomething)

Camel will cache large input streams (by default over 64K) in a temp file usingCachedOutputStream When you close the input stream the temp file will be deleted

23 servicemix-cxf-bc

Overview

A JBI compliant HTTPSOAP or JMSSOAP binding component named servicemix-cxf-bc which useapache cxf internally

The main features are

bull JBI compliant Binding Component

bull Usable in a lightweight mode in servicemixxml configuration files

bull SOAP 11 and 12 support

bull MIME attachments

bull Support for all MEPs as consumers or providers

bull SSL support

bull WS-Security support

bull WS-Policy support

bull WS-RM support

bull WS-Addressing support

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgcxfbc10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnscxfbc=httpservicemixapacheorgcxfbc10gtgt

lt-- add cxfbcconsumer or cxfbcprovider definitions here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-cxf-bc component defines two endpoints

cxfbcconsumer a server-side cxf endpoint that will consume plain HTTP+SOAP requestsand send them into the NMR to a given JBI endpoint

cxfbcprovider a client-side jbi endpoint which can receive requests from the NMR andsend them to a given url where the service is provided

cxfbcconsumer

Endpoint properties

busCfg javalangString

the location of the CXF configuration fileused to configure the CXF bus This allowsyou to configure features like WS-RM andJMS runtime behavior

delegateToJaas booleanSpecifies if the endpoint delegate toJAASAuthenticationService to do theauthentication

endpoint javalangString The name of the endpoint

features (javalangObject)Specifies the cxf features set for thisendpoint

inFaultInterceptors (javalangObject)a list of beans configuring interceptors thatprocess incoming faults

inInterceptors (javalangObject)a list of beans configuring interceptors thatprocess incoming responses

interfaceName javaxxmlnamespaceQName The qualified name of the interface exposedby the endpoint

locationURI javalangStringthe HTTP address to which requests aresent This value will overide any valuespecified in the WSDL

mtomEnabled boolean Specifies if MTOM attachment support isenabled Default is ltcodegtfalseltcodegt

outFaultInterceptors (javalangObject)a list of beans configuring interceptors thatprocess fault messages being returned tothe consumer

outInterceptors (javalangObject)a list of beans configuring interceptors thatprocess requests

properties javautilMap Sets arbitrary properties that are added tothe CXF context at the Endpoint level

providedBus orgapachecxfBus a preconfigured CXF Bus object to useoverrides busCfg

schemaValidationEnabled booleanSpecifies if the endpoint useschemavalidation for the incomingoutgoingmessage

service javaxxmlnamespaceQName The qualified name of the service theendpoint exposes

synchronous boolean Specifies if the endpoint expects sendmessageExchange by sendSync

targetEndpoint javalangString the name of the endpoint to which requestsare sent

targetInterface javaxxmlnamespaceQName the QName of the interface to whichrequests are sent

targetOperation javaxxmlnamespaceQName the QName of the operation to whichrequests are sent

targetService javaxxmlnamespaceQName the QName of the service to which requestsare sent

targetUri javalangString Set the target serviceendpointinterfaceusing a URI

timeout long the number of second the endpoint will waitfor a response The default is unlimited

useJBIWrapper booleanSpecifies if the JBI wrapper is sent in thebody of the message Default isltcodegttrueltcodegt

useSOAPEnvelope boolean Specifies if the endpoint expects soapmessages when useJBIWrapper is false

wsdl orgspringframeworkcoreioResource the location of the WSDL document definingthe endpoints interface

x509 boolean Specifies if the endpoint use X509Certificate to do the authentication

cxfbcprovider

Endpoint properties

inInterceptors (javalangObject)a list of beans configuring interceptors thatprocess incoming requests

locationURI javanetURIthe HTTP address of the exposed serviceThis value will overide any value specified inthe WSDL

outInterceptors (javalangObject)a list of beans configuring interceptors thatprocess responses

synchronous booleanSpecifies if the endpoints send messagesynchronously to external server usingunderlying

Examples

Configuring the CXF JMS Transport

The ServiceMix CXF binding component also allows using the CXF JMS Transport to send and receivemessages You can use the ltcxffeaturesgt element to add and configure theorgapachecxftransportjmsJMSConfigFeature on the endpoint as in the example below

ltcxfbcproviderltcxfbcprovider wsdl=orgapacheservicemixcxfbcwssecurityhello_worldwsdlservice=greeterHelloWorldServiceendpoint=HelloWorldPortProxyinterfaceName=greeterGreeterbusCfg=jms_conduit_configxmlgtgt

lt-- add interceptors here --gt

ltcxfbcfeaturesgtltcxfbcfeaturesgtltbeanltbean class=orgapachecxftransportjmsJMSConfigFeaturegtgt

ltpropertyltproperty name=jmsConfiggtgtltbeanltbean class=orgapachecxftransportjmsJMSConfigurationgtgt

ltpropertyltproperty name=concurrentConsumersgtgtltvaluegtltvaluegt5ltvaluegtltvaluegt

ltpropertygtltpropertygtltpropertyltproperty name=connectionFactorygtgt

ltrefltref bean=myConnectionFactory gtgtltpropertygtltpropertygtltpropertyltproperty name=targetDestinationgtgt

ltvaluegtltvaluegttestjmstransporttextproviderltvaluegtltvaluegtltpropertygtltpropertygtltpropertyltproperty name=useJms11gtgt

ltvaluegtltvaluegtfalseltvaluegtltvaluegtltpropertygtltpropertygt

ltbeangtltbeangtltpropertygtltpropertygt

ltbeangtltbeangtltcxfbcfeaturesgtltcxfbcfeaturesgt

ltcxfbcprovidergtltcxfbcprovidergt

ltamqconnectionFactoryltamqconnectionFactory id=myConnectionFactory brokerURL=vmlocalhostgtgt

The jms_conduit_configxml file specified in the busCfg parameter is optional and can be usedto specify additional JMS transport parameters

xmlnsxsi=httpwwww3org2001XMLSchema-instancexmlnsjms=httpcxfapacheorgtransportsjmsxsischemaLocation=httpcxfapacheorgtransportsjms httpcxfapacheorgschemasconfigurationjmsxsdhttpwwwspringframeworkorgschemabeans httpwwwspringframeworkorgschemabeansspring-beansxsdgtgt

ltjmsconduitltjmsconduit name=httpapacheorghello_world_soap_httpHelloWorldPortjms-conduit abstract=truegtgtltjmsclientConfigltjmsclientConfig clientReceiveTimeout=200000gtgt

ltjmsconduitgtltjmsconduitgt

ltbeansgtltbeansgt

Configuring the CXF HTTP Transport

In order to configure the underlying HTTP transport used by a CXF BC endpoint you can specify anadditional busCfg file as in the example below

ltcxfbcproviderltcxfbcprovider wsdl=orgapacheservicemixcxfbcwssecurityhello_worldwsdlservice=greeterHelloWorldServiceendpoint=HelloWorldPortProxyinterfaceName=greeterGreeterbusCfg=http_conduit_configxmlgtgt

lt-- add interceptors and additional CXF features here --gt

The http_conduit_configxml file can then specify the additional CXF configuration Have a lookat this page for an overview of all the options supported by CXF

ltbeansltbeans xmlns=httpwwwspringframeworkorgschemabeansxmlnsxsi=httpwwww3org2001XMLSchema-instancexmlnshttp-conf=httpcxfapacheorgtransportshttpconfigurationxsischemaLocation=httpcxfapacheorgtransportshttpconfiguration

httpcxfapacheorgschemasconfigurationhttp-confxsdhttpwwwspringframeworkorgschemabeanshttpwwwspringframeworkorgschemabeansspring-beansxsdgtgt

lthttp-confconduitlthttp-confconduit name=httpapacheorghello_world_soap_httpHelloWorldPorthttp-conduitgtgtlthttp-confclientlthttp-confclient Connection=Keep-Alive

MaxRetransmits=1AllowChunking=false gtgt

lthttp-confconduitgtlthttp-confconduitgtltbeansgtltbeansgt

24 servicemix-cxf-se

Overview

ServiceMix CXF SE component is a JBI Service Engine exposing (annotated) POJO as services on theJBI BusIt uses Apache CXF internally to perform service invocations and xml marshaling

Features

bull jsr181 annotations

bull jaxb2aegisxmlbeans databinding

bull wsdl auto generation

bull java proxy support

bull MTOM attachments support

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgcxfse10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnscxfse=httpservicemixapacheorgcxfse10gtgt

lt-- add cxfseendpoint definitions here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-cxf-bc component defines one endpoint type

cxfseendpoint no description yet

cxfseendpoint

Endpoint properties

inFaultInterceptors (javalangObject)a list of beans configuring interceptors that processincoming faults

inInterceptors (javalangObject)a list of beans configuring interceptors that processincoming requests

interfaceName javaxxmlnamespaceQName The qualified name of the interface exposed by theendpoint

mtomEnabled boolean Specifies if the service can consume MTOM formattedbinary data The default is ltcodegtfalseltcodegt

outFaultInterceptors (javalangObject)a list of beans configuring interceptors that process faultmessages being returned to the consumer

outInterceptors (javalangObject)a list of beans configuring interceptors that processresponse messages

pojo javalangObject a bean configuring the JAX-WS annotated implementationfor the endpoint

pojoEndpoint javaxxmlnamespaceQName Specifies the servicemodel endpoint name generated fromthe pojo The default is ltcodegtnullltcodegt

pojoInterfaceName javaxxmlnamespaceQName Specifies the servicemodel interface name generated fromthe pojo The default is ltcodegtnullltcodegt

pojoService javaxxmlnamespaceQName Specifies the servicemodel service name generated fromthe pojo The default is ltcodegtnullltcodegt

properties javautilMap Specifies a map of properties

service javaxxmlnamespaceQName The qualified name of the service the endpoint exposes

useAegis booleanSpecifies if the endpoint use aegis databinding tomarshallunmarshall message The default isltcodegtfalseltcodegt

useJBIWrapper boolean

Specifies if the endpoint expects to receive the JBI wrapperin the message received from the NMR The default isltcodegttrueltcodegt Ignore the value ofuseSOAPEnvelope if useJBIWrapper is true

useSOAPEnvelope booleanSpecifies if the endpoint expects soap messages whenuseJBIWrapper is false if useJBIWrapper is true then ignoreuseSOAPEnvelope The default is ltcodegttrueltcodegt

useXmlBeans booleanSpecifies if the endpoint use xmlbeans databinding tomarshellunmarshell message The default isltcodegtfalseltcodegt

cxfbcproxy

Endpoint properties

componentRegistry javalangObjectAllows injecting a custom componentregistry for looking up the proxyingendpoint

container orgapacheservicemixjbiapiContainer Allows injecting a JBI Container instance(eg for testing purposes)

context javaxjbicomponentComponentContext Allows injecting the ComponentContext

factory orgapacheservicemixjbiapiClientFactory Allows injecting a ClientFactory

interfaceName javaxxmlnamespaceQName Specifies the servicemodel interfacename

mtomEnabled booleanSpecifies if the service can consumeMTOM formatted binary data Thedefault is ltcodegtfalseltcodegt

name javalangString

Specifies the JNDI name for looking upthe ClientFactory Defaults toltcodegtjavacompenvjbiClientFactoryltcodegt

propagateSecuritySubject boolean

When set to ltcodegttrueltcodegt thesecurity subject is propagated along tothe proxied endpoint Defaults toltcodegtfalseltcodegt

service javaxxmlnamespaceQName Specifies the servicemodel service name

type javalangClass Specifies the webservice POJO type

Specifies if the endpoint expects toreceive the JBI wrapper in the messagereceived from the NMR The default isltcodegttrueltcodegt Ignore the valueof useSOAPEnvelope if useJBIWrapper istrue

useSOAPEnvelope boolean

Specifies if the endpoint expects soapmessages when useJBIWrapper is falseif useJBIWrapper is true then ignoreuseSOAPEnvelope The default isltcodegttrueltcodegt

25 servicemix-drools

Overview

The ServiceMix Drools component provides JBI integration to the Drools Rules Engine

This Service Engine can be used to deploy a rules set that will implement a router or an actualservice

A router will mostly act as a transparent proxy between the consumer and the target serviceprovider mad will mostly be implemented by the jbiroute(uri) method below This method creates anew exchange identical to the one received by the component and will send it to the specifieddestination You can also send back a Fault if needed A router can also be implemented by usingdirectly the JBI Apis (available with the jbi helper) by using the provided client

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgdrools10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnsdrools=httpservicemixapacheorgdrools10gtgt

lt-- add droolsendpoint definitions here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-drools component defines one endpoint type

droolsendpoint no description yet

droolsendpoint

Endpoint properties

assertedObjects (javalangObject)List of additional objects to beinserted into the drools workingmemory for evaluating rules

autoReply booleanWill this endpoint automatically replyto any exchanges not handled by theDrools rulebase

component orgapacheservicemixcommonDefaultComponent

defaultTargetService javaxxmlnamespaceQNameThe default service that theexchange will be sent to if none ofthe rules have handled it

defaultTargetURI javalangStringThe default endpoint URI that theexchange will be sent to if none ofthe rules have handled it

globals javautilMapThe global variables that areavailable while evaluating the rulebase

interfaceName javaxxmlnamespaceQName The qualified name of the interfaceexposed by the endpoint

namespaceContext javaxxmlnamespaceNamespaceContext The namespace context to use whenevaluating the rules

ruleBase orgdroolsRuleBase Set the rule base to be used forhandling the exchanges

ruleBaseResource orgspringframeworkcoreioResource Specifies the resource location toload the rule base from (drl file)

ruleBaseURL javanetURL Specifies a URL to load the rule basefrom (drl file)

su orgapacheservicemixcommonServiceUnit

26 servicemix-eip

Overview

The servicemix-eip component is a routing container where different routing patterns can bedeployed as service unitThis component is based on the great Enterprise Integration Patterns book

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgeip10 This is an example of an xbeanxml file with a namespace definition with prefix eip

ltbeansltbeans xmlns=httpwwwspringframeworkorgschemabeansxmlnsxsi=httpwwww3org2001XMLSchema-instancexmlnseip=httpservicemixapacheorgeip10xsischemalocation=httpwwwspringframeworkorgschemabeans httpwwwspringframeworkorgschemabeansspring-beans-25xsdgtgt

lt-- Pipeline example --gtlteippipelinelteippipeline service=testpipeline endpoint=endpointgtgtlteiptransformergtlteiptransformergtlteipexchange-targetlteipexchange-target service=testtransformer gtgt

lteiptransformergtlteiptransformergtlteiptargetgtlteiptargetgtlteipexchange-targetlteipexchange-target service=testtrace gtgt

lteiptargetgtlteiptargetgtlteippipelinegtlteippipelinegtltbeansgtltbeansgt

Endpoint types

The servicemix-eip component defines several endpoint types

eipcontent-based-router Implements the Content-Based Router EIP

eipmessage-filter Implements the Message Filter EIP

eippipeline Implements the Pipeline EIP

eipstatic-recipient-list Implements the Static Recipient List EIP

eipstatic-routing-slip Implements the Static Routing Slip EIP

eipwire-tap Implements the Wire Tap EIP

eipxpath-splitter Uses XPath to split a message

eipsplit-aggregator Aggregates messages that have been split by the xpath-splitter

eipcontent-enricher Implements the Content Enricher EIP

eipresequencer Implements the Resequencer EIP

eipasync-bridge Handles an InOut exchange by correlating to separate InOnlyexchanges

In addition this component can use all ServiceMix flows (including clustered and transactionalflows) can be configured to be resilient to crashes and supports full fail-over to another node whenclustered

Content Based Router

ContentBasedRouter can be used for all kind of content-based routingThis pattern implements the Content-Based Router pattern

Endpoint properties

forwardOperation boolean Forward the operation qname whensending the exchange to the target

lockManager orgapacheservicemixcommonlocksLockManager

The lock manager to use for thisendpoint If none is explicitelyspecified a default implementationwill be provided

rules (orgapacheservicemixeipsupportRoutingRule) The list of routing rules

service javaxxmlnamespaceQName The qualified name of the servicethe endpoint exposes

store orgapacheservicemixstoreStore

Configure the store to use If none isexplicitely configured thestoreFactory will be used to createone

storeFactory orgapacheservicemixstoreStoreFactory

The store factory to use whencreating a store If no factory isexplicitely defined an in-memoryonly factory will be created

timerManager orgapacheservicemixtimersTimerManager

The timer manager to use for thisendpoint If none is explicitelyconfigured a defaultimplementation will be provided

wsdlExchangeTarget orgapacheservicemixeipsupportExchangeTarget

An exchange target pointing to a JBIendpoint that will be used to loadthe WSDL describing this endpointThis can be used when the endpointproxies another endpoint so that thesame WSDL definition will beexposed

wsdlResource orgspringframeworkcoreioResource When specified this spring resourcewill be used to load the WSDL that

will be exposed as a description forthis endpoint This property can beused to explicitely define the WSDLto be exposed by this endpoint Thisproperty takes precedence over thewsdlExchangeTarget property

Message Filter

MessageFilter allows filtering incoming JBI exchanges As it drops unwanted messages and in anInOut exchange a response is required MessageFilter and InOut MEPs cannot be used togetherThis pattern implements the Message Filter pattern

Endpoint properties

filter orgapacheservicemixeipsupportPredicate The filter to use on incomingmessages

reportErrors boolean

Indicates if faults and errors fromrecipients should be sent back tothe consumer In such a case onlythe first fault or error received willbe reported Note that if theconsumer is synchronous it will beblocked until all recipientssuccessfully acked the exchange ora fault or error is reported and theexchange will be kept in the storefor recovery

target orgapacheservicemixeipsupportExchangeTarget The main target destination whichwill receive the exchange

wsdlResource orgspringframeworkcoreioResource

When specified this spring resourcewill be used to load the WSDL thatwill be exposed as a description forthis endpoint This property can beused to explicitely define the WSDLto be exposed by this endpoint Thisproperty takes precedence over thewsdlExchangeTarget property

Pipeline

The Pipeline component is a bridge between an In-Only (or Robust-In-Only) MEP and an In-OutMEP When the Pipeline receives an In-Only MEP it will send the input in an In-Out MEP to thetranformer destination and forward the response in an In-Only MEP to the target destination

The old orgapacheservicemixcomponentsutilPipelineComponent will be deprecated This oneoffers the same feature but can be safely clustered and use in a transactional enviromnent

In the default configuration faults sent by the transformer component are sent back to theconsumer as faults if the exchange MEP supports them or as errors (for InOnly exchanges) Thisbehavior can be changed by setting the sendFaultsToTarget attribute to true in which case faultswill be sent to the target component or by adding a faultsTarget element where faults should besent

Endpoint properties

copyAttachments boolean Should message attachments becopied

copyProperties boolean Should message properties becopied

faultsTarget orgapacheservicemixeipsupportExchangeTarget The address of the endpoint to sendfaults to

sendFaultsToTarget boolean

When the faultsTarget is notspecified faults may be sent to thetarget endpoint if this flag is set toltcodegttrueltcodegt

target orgapacheservicemixeipsupportExchangeTarget The address of the target endpoint

transformer orgapacheservicemixeipsupportExchangeTarget The adress of the in-out endpointacting as a transformer

Static Recipeint List

The StaticRecipientList component will forward an input In-Only or Robust-In-Only exchange to alist of known recipientsThis component implements the Recipient List pattern with the limitation that the recipient list isstatic

Endpoint properties

interfaceName javaxxmlnamespaceQNameThe qualified name of theinterface exposed by theendpoint

The lock manager to use for thisendpoint If none is explicitelyspecified a defaultimplementation will be provided

recipients (orgapacheservicemixeipsupportExchangeTarget)A list of recipients that will eachreceive a copy of the inputmessage

Indicates if faults and errors fromrecipients should be sent back tothe consumer In such a caseonly the first fault or errorreceived will be reported Notethat if the consumer issynchronous it will be blockeduntil all recipients successfullyacked the exchange or a fault orerror is reported and theexchange will be kept in thestore for recovery

Configure the store to use Ifnone is explicitely configuredthe storeFactory will be used tocreate one

The store factory to use whencreating a store If no factory isexplicitely defined an in-memory only factory will becreated

The timer manager to use forthis endpoint If none isexplicitely configured a defaultimplementation will be provided

An exchange target pointing to aJBI endpoint that will be used toload the WSDL describing thisendpoint This can be used whenthe endpoint proxies anotherendpoint so that the same WSDLdefinition will be exposed

When specified this springresource will be used to load theWSDL that will be exposed as adescription for this endpointThis property can be used toexplicitely define the WSDL to beexposed by this endpoint Thisproperty takes precedence overthe wsdlExchangeTargetproperty

Static Routing Slip

A RoutingSlip component can be used to route an incoming In-Out exchange through a series oftarget servicesThis component implements the Routing Slip pattern with the limitation that the routing table isstaticThis component only uses In-Out MEPs and errors or faults sent by targets are reported back to theconsumer thus interrupting the routing process

Endpoint properties

targets (orgapacheservicemixeipsupportExchangeTarget)List of target endpoints used inthe RoutingSlip

An exchange target pointing to aJBI endpoint that will be used toload the WSDL describing thisendpoint This can be used whenthe endpoint proxies another

endpoint so that the same WSDLdefinition will be exposed

Wire Tap

A WireTap component can be used to forward a copy of the input message to a listener in a proxyfashionThis component implements the WireTap patternIt can handle all four standard MEPs but will only send an In-Only MEP to the listenerThe originating service must be configured to send messages to the WireTap directlyIn the case of an In-Out MEP this means that the WireTap needs to be configured to send theexchange along to the destination service

Similar to the example above the WireTap can also be used

bull to forward the output message of an exchange using lteipoutListenergt

bull to forward the fault message of an exchange using lteipfaultListenergt

Endpoint properties

copyProperties boolean

If copyProperties isltcodegttrueltcodegt properties onthe in message will be copied to theout fault message before it is sent

faultListener orgapacheservicemixeipsupportExchangeTarget The listener destination for faultmessages

inListener orgapacheservicemixeipsupportExchangeTarget The listener destination for inmessages

outListener orgapacheservicemixeipsupportExchangeTarget The listener destination for outmessages

XPath Splitter

The XPathSplitter component implements the Splitter pattern using an xpath expression to split theincoming xml

Endpoint properties

factory javaxxmlxpathXPathFactory

The XPath factory If no factory is explicitelyconfigured a defaut one will be createdusingltcodegtXPathFactorynewInstance()ltcodegt

forwardAttachments boolean Indicates if incoming attachments should beforwarded with the new exchanges

forwardProperties boolean Indicates if properties on the incomingmessage should be forwarded

functionResolver javaxxmlxpathXPathFunctionResolver The function resolver

lockManager orgapacheservicemixcommonlocksLockManagerThe lock manager to use for this endpoint Ifnone is explicitely specified a defaultimplementation will be provided

namespaceContext javaxxmlnamespaceNamespaceContext The namespace context to use whenevaluating the xpath expression

Indicates if faults and errors from splittedparts should be sent back to the consumerIn such a case only the first fault or errorreceived will be reported Note that if theconsumer is synchronous it will be blockeduntil all parts have been successfully ackedor a fault or error is reported and theexchange will be kept in the store forrecovery

store orgapacheservicemixstoreStoreConfigure the store to use If none isexplicitely configured the storeFactory willbe used to create one

storeFactory orgapacheservicemixstoreStoreFactoryThe store factory to use when creating astore If no factory is explicitely defined anin-memory only factory will be created

synchronous boolean Specifies wether exchanges for all parts aresent synchronously or not

timerManager orgapacheservicemixtimersTimerManagerThe timer manager to use for this endpointIf none is explicitely configured a defaultimplementation will be provided

variableResolver orgapacheservicemixexpressionMessageVariableResolver

The variable resolver The default one willenable the use of properties on themessage exchange as well as makingsystem properties and environmentproperties available

An exchange target pointing to a JBIendpoint that will be used to load the WSDLdescribing this endpoint This can be usedwhen the endpoint proxies another endpointso that the same WSDL definition will beexposed

When specified this spring resource will beused to load the WSDL that will be exposedas a description for this endpoint Thisproperty can be used to explicitely definethe WSDL to be exposed by this endpoint

This property takes precedence over thewsdlExchangeTarget property

xpath javalangString The xpath expression used to split the inputmessage

Split Aggregator

The SplitAggregator is an aggregator mainly usefull to collect messages that have been createdusing a splitterIt relies on several properties that should be set on the exchanges (count index correlationId)

Endpoint properties

Content Enricher

With a Content Enricher you can extract additional information from a source and add thisinformation to your message This is useful if the calling service for example extracts a userID andyour target system is only aware of a userName By using the Content-Enricher you could extractthis information from a source system and add this additional information (userName) to yourmessage

lteipcontent-enricherlteipcontent-enricher service=testcontentEnricher endpoint=endpointgtgtlteipenricherTargetgtlteipenricherTargetgtlteipexchange-targetlteipexchange-target service=testadditionalInformationExtracter gtgt

lteipenricherTargetgtlteipenricherTargetgtlteiptargetgtlteiptargetgtlteipexchange-targetlteipexchange-target service=testmyTarget gtgt

lteiptargetgtlteiptargetgtlteipcontent-enrichergtlteipcontent-enrichergt

Endpoint properties

copyAttachments boolean

If this is set toltcodegttrueltcodegt messageattachments from the incomingexchange and the enricherexchange will be copied to theoutgoing message exchange Thedefault value isltcodegtfalseltcodegt (do not copymessage atachments)

If this is set toltcodegttrueltcodegt messageproperties from the incomingexchange and the enricherexchange will be copied to theoutgoing message exchange Thedefault value isltcodegtfalseltcodegt (do not copymessage properties)

enricherElementName javaxxmlnamespaceQName returns the QName of the resultingroot node

enricherTarget orgapacheservicemixeipsupportExchangeTargetThe target that will receive a copyof the input message and return anaddtitional content

requestElementName javaxxmlnamespaceQNameReturns the QName of the elementwhich contains the IN Messagewithin the response message

resultElementName javaxxmlnamespaceQName

Returns the QName of the elementwhich contains the message whichwas produced by theenricherTarget within the responsemessage

Configure the store to use If noneis explicitely configured thestoreFactory will be used to createone

target orgapacheservicemixeipsupportExchangeTarget The target where the enrichedexchanges are sent

wsdlExchangeTarget orgapacheservicemixeipsupportExchangeTargetAn exchange target pointing to aJBI endpoint that will be used toload the WSDL describing this

endpoint This can be used whenthe endpoint proxies anotherendpoint so that the same WSDLdefinition will be exposed

When specified this springresource will be used to load theWSDL that will be exposed as adescription for this endpoint Thisproperty can be used to explicitelydefine the WSDL to be exposed bythis endpoint This property takesprecedence over thewsdlExchangeTarget property

Eip Resequencer

A resequencer re-orders incoming In-Only or Robust-In-Only exchanges and sends themsynchronously to a targets service Synchronous sending ensures that messages arrive in correctorder at the target service This component implements the Resequencer pattern

It works on (continuous) streams of message exchanges using a timeout policy Since theresequencer doesnt make batch reads theres no need to know the number of messages to be re-ordered in advance (although a capacity parameter prevents the resequencer from running out ofmemory) If the maximum out-of-sequence time difference between messages in a message streamis known the resequencers timeout parameter should be set to this value (milliseconds) In thiscase it is guaranteed that all elements of a stream are delivered in correct order to the targetservice The lower the timeout value is compared to the out-of-sequence time difference thehigher is the probability for out-of-sequence messages sent by this resequencer Large timeoutvalues should be supported by sufficiently high capacity values

For comparing elements of a sequence the resequencer component can be configured with asequence element comparator A default comparator is provided that compares message exchangesbased on Long sequence numbers This comparator expects the sequence number to be the value ofthe orgapacheservicemixeipsequencenumber property of the exchangess in-NormalizedMessage The name of the property can be customized in the comparator configuration(see below) You may also provide a custom comparator by implementing theSequenceElementComparator interface

lteipresequencerlteipresequencerservice=sampleResequencerendpoint=ResequencerEndpointcomparator=comparatorcapacity=100timeout=2000gtgtlteiptargetgtlteiptargetgtlteipexchange-targetlteipexchange-target service=sampleSampleTarget gtgt

lteiptargetgtlteiptargetgtlteipresequencergtlteipresequencergtlt-- Configure default comparator with custom sequence number property --gtlteipdefault-comparatorlteipdefault-comparator id=comparator sequenceNumberKey=seqnumgtgt

A running example can be downloaded from here In this example a custom-coded message sendersends messages in wrong order to the resequencer The resequencer re-orders these messagesand (synchronously) sends them to a file sender-endpoint The file sender-enpoint writes themessages (in proper order) to the workoutput directory

Endpoint properties

capacity int

The capacity of thisresequencer Thecapacity determinesthe maximumnumber of messagethat will be kept inmemory to put themessages back insequence Thisdetermine how fartwo messages canbe in the list ofmessages while stillbeing put back insequence

comparator orgapacheservicemixeipsupportresequenceSequenceElementComparator

The comparatorused to determinethe sequence orderof elements

The lock managerto use for thisendpoint If none isexplicitely specifieda defaultimplementation willbe provided

store orgapacheservicemixstoreStoreConfigure the storeto use If none isexplicitely

configured thestoreFactory will beused to create one

The store factory touse when creating astore If no factoryis explicitelydefined an in-memory onlyfactory will becreated

target orgapacheservicemixeipsupportExchangeTarget

timeout long

Set the timeout ofthis resequencerThis specifies themaximum numberof milliseconds thatcan elapse betweentwo out-of-syncmessages

The timer managerto use for thisendpoint If none isexplicitelyconfigured adefaultimplementation willbe provided

An exchange targetpointing to a JBIendpoint that willbe used to load theWSDL describingthis endpoint Thiscan be used whenthe endpointproxies anotherendpoint so that thesame WSDLdefinition will beexposed

When specified thisspring resource willbe used to load theWSDL that will beexposed as adescription for thisendpoint Thisproperty can beused to explicitelydefine the WSDL tobe exposed by thisendpoint Thisproperty takesprecedence over thewsdlExchangeTargetproperty

Async Bridge

The AsyncBridge expects an InOut mep as input It then uses the exchange id of the InOut mep asthe correlation id and creates an InOnly message by copying the input message and sends it to thetarget (with the correlation id set as a property) Next it expects an InOnly to come back with the

same correlation id property When this happens the message is copied to the out message of theoriginal exchange and sent back If no response is received during the configured amount of time(timeout property in milliseconds) an error will be sent back to the original consumer

lteipasync-bridgelteipasync-bridgeservice=sampleAsyncBridgeendpoint=AsyncBridgeEndpointlteiptargetgtgtlteipexchange-targetlteipexchange-target service=sampleSampleTarget gtgt

lteiptargetgtlteiptargetgtlteipasync-bridgegtlteipasync-bridgegt

Correlation Id

There is a convention between the AsyncBridge and the target on how the correlation id istransmitted The correlation id can only be transmitted from the AnsycBridge to the target using amessage property The property name can be customized On the other hand the correlation idcoming back from the target could be set in a message property or the message payload TheAsyncBridge could use an Expression to extract the correlation id from the message returning fromthe target

lteipasync-bridgelteipasync-bridgeservice=sampleAsyncBridgeendpoint=AsyncBridgeEndpointresponseCorrIdProperty=correlationIdPropertyresponseCorrId=responseCorrIdExpressiongtgtlteiptargetgtlteiptargetgt

lteipexchange-targetlteipexchange-target service=sampleSampleTarget gtgtlteiptargetgtlteiptargetgt

lteipasync-bridgegtlteipasync-bridgegt

ltbeanltbean id=responseCorrIdExpression class=orgapacheservicemixexpressionJAXPStringXPathExpression gtgtltcontructor-argltcontructor-arg value=my-responsemessagecorrIdgtgt

ltbeangtltbeangt

As you can see from the sample above the responseCorrIdProperty is used to set the name of theproperty that the target will query to get the correlation id sent by the AsyncBridge In other wordsthe target will do something like this to extract the correlation id

String correlationId = exchangegetProperty(correlationIdProperty)

The responseCorrId is set with an instance of type orgapacheservicemixexpressionExpression inthis case the class orgapacheservicemixexpressionJAXPStringXPathExpressionThis expression resolves the location of the correlation id coming back from the target In the aboveexample the expression shows that the correlation id comes as part of the message payload in anattribute called corrId of the my-responsemessage element In a similar manner the classorgapacheservicemixexpressionPropertyExpression could have been used to locate the correlationid in a message property

Endpoint properties

requestCorrId orgapacheservicemixexpressionExpression

The expression used to compute thecorrelation id used to correlate theresponse and the request The defaultbehavior is to use the exchange id ofthe incoming In-Out exchange as thecorrelation id

responseCorrId orgapacheservicemixexpressionExpression

The expression used to compute thecorrelation id from the responseexchange The value computed by thisexpression must match the one fromthe link setRequestCorrIdexpression The default value is nullbut if no specific expression isconfigured an expression will becreated which will extract theresponse correlation id from thelinksetResponseCorrIdProperty(String)property on the exchange

responseCorrIdProperty javalangStringName of the property used by defaultto compute the correlation id on theresponse exchange

The store factory to use when creatinga store If no factory is explicitelydefined an in-memory only factorywill be created

The target which will be used to sendan In-Only or Robust-In-Onlyexchange to When receiving an In-Out exchange the async bridge willcreate an In-Only request and send itto the specified target It then expectsanother In-Only exchange to comeback as the response which will beset as the Out message on the In-Outexchange This property is mandatoryand must be set to a valid target

timeout long

The timeout property controls theamount of time that the async bridgewill wait for the response after havingsent the request The default value is0 which means that no timeout applyIf set to a non zero value a timer willbe started when after the request issent When the timer expires the In-Out exchange will be sent back withan error status and a linkjavautilconcurrentTimeoutExceptionas the cause of the error The valuerepresents the number of millisecondsto wait

The timer manager to use for thisendpoint If none is explicitelyconfigured a default implementationwill be provided

useRobustInOnly boolean

Boolean flag to control if In-Only orRobust-In-Only exchange should beused when sending the request Thedefault value is ltcodegtfalseltcodegtwhich means that an In-Onlyexchange will be used When using aRobust-In-Only exchange and when afault is received this fault will be sentback to the consumer on the In-Outexchange and the response exchange(if any) would be discarded For bothIn-Only and Robust-In-Only if therequest exchange comes back with anError status this error will beconveyed back to the consumer in thesame way

An exchange target pointing to a JBIendpoint that will be used to load theWSDL describing this endpoint Thiscan be used when the endpointproxies another endpoint so that thesame WSDL definition will beexposed

When specified this spring resourcewill be used to load the WSDL that willbe exposed as a description for thisendpoint This property can be usedto explicitely define the WSDL to beexposed by this endpoint Thisproperty takes precedence over thewsdlExchangeTarget property

ExchangeTarget

All patterns use the ltexchange-target gt tag to specify the target of a JBI exchangeThis element has the following attributes

Name Type Description

interface QName the QName of the target interface One of service or interface attribute is required

operation QName the QName of the target operation (optional)

service QName the QName of the target service One of service or interface attribute is required

endpoint String the name of the target JBI endpoint only used when service is set

uri String uri used to target the exchange (see URIs)

NamespaceContext

Some patterns use XPath expression To use such expressions on an xml with namespaces youneed to define a NamespaceContext

This NamespaceContext can be referenced by a namespaceContext attribute as shown in theXPathSplitter or MessageFilter examples

Predicates

Some patterns uses predicates to test a given JBI exchange The only predicate currentlyimplemented is the XPathPredicate but you can implement your own and deploy it with the serviceunit

Configuring temporary message storage

Many of the pattern implementation need to store MessageExchanges temporarily An example theaggregator will need to keep track of the MessageExchange it is aggregating By default the EIPsuse a plain MemoryStoreFactory to create in-memory stores but there are other options If you setthe timeout property on the MemoryStoreFactory it will evict old object from the in-memorystore to avoid a memory leak You can also use a JDBCStoreFactory to store data in a databaseinstead of in memory

Example to use an in-memory store with timeout for a storing active and closed aggregations in altsplit-aggregatorgt you can do

lteipsplit-aggregatorlteipsplit-aggregator service=testaggregator endpoint=endpointstoreFactory=StoreFactory closedAggregateStoreFactory=StoreFactorygtgt

lteiptargetgtlteiptargetgtlteipexchange-targetlteipexchange-target service=testtrace5 gtgt

lteiptargetgtlteiptargetgtlteipsplit-aggregatorgtlteipsplit-aggregatorgt

ltbeanltbean id=StoreFactory class=orgapacheservicemixstoreMemoryStoreFactorygtgtltpropertyltproperty name=timeout value=120000gtgt lt-- 2 minute timeout --gt

ltbeangtltbeangt

Creating your own patterns

Some classes have been designed to be extensible this includes

bull orgapacheservicemixeipsupportAbstractAggregator

bull orgapacheservicemixeipsupportAbstractSplitter

27 servicemix-exec

Overview

The ServiceMix Exec component is used to invoke commands (executables binaries shellcommands shell scripts etc) The command can be static (defined in the endpoint attributes) ordynamic (provided in the incoming message including arguments)

The namespace URI for the servicemix-exec component is httpservicemixapacheorgexec10 The is an example of ltfilenamegtxbeanxmlltfilenamegt with a namespace definition withprefix exec

ltbeansltbeans xmlnsexec=httpservicemixapacheorgexec10gtgt

lt-- add execendpoint definitions here --gt

ltbeansgtltbeansgt

Endpoints types

The ServiceMix Exec component only defines one endpoint called execendpoint

Endpoint execendpoint

Endpoint properties

PropertyName

Type Description

command javalangString

ltpgt This attribute specifies the defaultcommand to use if no is provided in theincoming message ltpgt ltigt nbsp hedefault value is ltcodegtnullltcodegt

marshaler orgapacheservicemixexecmarshalerExecMarshalerSupport

ltpgt With this method you can specifya marshaler class which provides thelogic for converting a message into aexecution command This class has toimplement the interface classltcodegtExecMarshalerSupportltcodegtIf you dont specify a marshaler theltcodegtDefaultExecMarshalerltcodegtwill be used ltpgt

wsdl orgspringframeworkcoreioResourceltpgt This attribute specifies theabstract WSDL describing the endpointbehavior ltpgt

Abstract WSDL

How it works

28 servicemix-file

Overview

The ServiceMix File component provides JBI integration to the file system It can be used to read ampwrite files via URI or to periodically poll directories for new files

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgfile10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnsfile=httpservicemixapacheorgfile10gtgt

lt-- add filepoller and filesender definitions here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-file component defines two endpoint type

filepoller Periodically polls a directory for files and sends an exchange for every file

filesender Writes the contents of an exchange to a file

filepoller

Endpoint properties

archive javaioFile Specifies a directory relative to the polling directory to which processed files arearchived

autoCreateDirectory booleanSpecifies if the endpoint should create the target directory if it does not alreadyexist If you set this to ltcodegtfalseltcodegt and the directory does not existthe endpoint will not do anything Default value is ltcodegttrueltcodegt

comparator javautilComparator

Specifies a ltcodegtComparatorltcodegt which will be used to sort File listingbefore starting to process The default is null means no sortingltcodegtComparatorltcodegt objects are implementations ofltcodegtjavautilComparatorltcodegt

concurrentPolling boolean Sets whether more than one poll can be active at a time (true means yes)Default value is ltcodegtfalseltcodegt

delay long Sets the amount of time in milliseconds that the endpoint should wait beforemaking the first poll

deleteFile boolean Specifies if files should be deleted after they are processed Default value isltcodegttrueltcodegt

file javaioFileSpecifies the file or directory to be polled If it is a directory all files in thedirectory or its sub-directories will be processed by the endpoint If it is a fileonly files matching the filename will be processed

filter javaioFileFilter Bean defining the class implementing the file filtering strategy This bean mustbe an implementation of the ltcodegtjavaioFileFilterltcodegt interface

firstTime javautilDateSets the date on which the first poll will be executed If a delay is also set usingltcodegtsetDelayltcodegt the delay interval will be added after the datespecified

interfaceName javaxxmlnamespaceQName The qualified name of the interface exposed by the endpoint

Bean defining the class implementing the file locking strategy This bean mustbe an implementation of theltcodegtorgapacheservicemixlocksLockManagerltcodegt interface By defaultthis will be set to an instances ofltcodegtorgapacheservicemixcommonlocksimplSimpleLockManagerltcodegt

marshaler orgapacheservicemixcomponentsutilFileMarshaler

Specifies a ltcodegtFileMarshalerltcodegt object that will marshal file data intothe NMR The default file marshaller can read valid XML dataltcodegtFileMarshalerltcodegt objects are implementations ofltcodegtorgapacheservicemixcomponentsutilFileMarshalerltcodegt

maxConcurrent int How many open exchanges can be pending Default is -1 for unboundedpending exchanges Set to 1n to engage throttling of polled file processing

period long Sets the number of milliseconds between polling attempts

recursive booleanSpecifies if sub-directories are polled if false then the poller will only poll thespecified directory If the endpoint is configured to poll for a specific file ratherthan a directory then this attribute is ignored Default is ltcodegttrueltcodegt

scheduler orgapacheservicemixcommonschedulerScheduler Set a custom Scheduler implementation if you need more fine-grained controlover the polling schedule

serviceUnit orgapacheservicemixcommonServiceUnit

targetEndpoint javalangString the name of the endpoint to which requests are sent

targetInterface javaxxmlnamespaceQName the QName of the interface to which requests are sent

targetOperation javaxxmlnamespaceQName the QName of the operation to which requests are sent

targetService javaxxmlnamespaceQName the QName of the service to which requests are sent

targetUri javalangString Set the target serviceendpointinterface using a URI

filesender

Endpoint properties

append boolean

Specifies if the endpoint appends data to existing files or if it willoverwrite existing files The default is for the endpoint to overwriteexisting files Setting this to ltcodegttrueltcodegt instructs theendpoint to append data Default value is ltcodegtfalseltcodegt

autoCreateDirectory boolean

Specifies if the endpoint should create the target directory if it doesnot exist If you set this to ltcodegtfalseltcodegt and the directorydoes not exist the endpoint will not do anything Default valueltcodegttrueltcodegt

component orgapacheservicemixfileFileComponent

directory javaioFile Specifies the directory where the endpoint writes files

Specifies a ltcodegtFileMarshalerltcodegt object that will marshalmessage data from the NMR into a file The default file marshaler canwrite valid XML data ltcodegtFileMarshalerltcodegt objects areimplementations ofltcodegtorgapacheservicemixcomponentsutilFileMarshalerltcodegt

overwrite boolean

Specifies if the endpoint overwrites existing files or not The default isfor the endpoint to not overwrite existing files Setting this toltcodegttrueltcodegt instructs the endpoint to overwrite existing filesDefault value is ltcodegtfalseltcodegt

tempFilePrefix javalangString Specifies a string to prefix to the beginning of generated file names

tempFileSuffix javalangString Specifies a string to append to generated file names

29 servicemix-ftp

Overview

The ServiceMix FTP component provides JBI integration to the FTP servers It can be used to read ampwrite files over FTPor to periodically poll directories for new files

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgftp10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnsftp=httpservicemixapacheorgftp10gtgt

lt-- add ftppoller and ftpsender definitions here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-ftp component defines two endpoint type

ftppoller Periodically polls a directory on an FTP server for files and sends anexchange for every file

ftpsender Writes the contents of an exchange to a file on an FTP server

ftppoller

Endpoint properties

archive javanetURISpecifies a directory relative tothe polling directory to whichprocessed files are archived

Specifies if the endpointshould create the targetdirectory if it does not alreadyexist If you set this toltcodegtfalseltcodegt and thedirectory does not exist theendpoint will not do anythingDefault value isltcodegttrueltcodegt

changeWorkingDirectory boolean

When set toltcodegttrueltcodegt thepoller will do an explicitltcodegtcwdltcodegt into thedirectory to be polled Defaultto ltcodegtfalseltcodegtRecursive polling will not bepossible if this feature isenabled

clientPool orgapacheservicemixftpFTPClientPool Set a custom FTPClientPool Ifthis property has not been set

the FTP client pool will becreated based on theinformation provided in theURI

component orgapacheservicemixcommonDefaultComponenttheltcodegtcomponentltcodegtimplementation to use

concurrentPolling boolean

Sets whether more than onepoll can be active at a time(true means yes) Default valueis ltcodegtfalseltcodegt

delay long

Sets the amount of time inmilliseconds that the endpointshould wait before making thefirst poll

deleteFile boolean

Delete the file after it has beensuccesfully processedDefaults toltcodegttrueltcodegt

filter javaioFileFilter

Sets the filter to select whichfiles have to be processedWhen not set all files will bepicked up by the poller

firstTime javautilDate

Sets the date on which the firstpoll will be executed If a delayis also set usingltcodegtsetDelayltcodegt thedelay interval will be addedafter the date specified

Set a custom LockManagerimplementation for keepingtrack of which files are alreadybeing processed The defaultimplementation is a simplein-memory lock managementsystem

Set a custom FileMarshalerimplementation to control howthe file contents is beingtranslated into a JBI messageThe default implementationreads XML contents from thefile

period longSets the number ofmilliseconds between pollingattempts

recursive boolean

Specifies whethersubdirectories should bepolled Defaults toltcodegttrueltcodegt

scheduler orgapacheservicemixcommonschedulerScheduler

Set a custom Schedulerimplementation if you needmore fine-grained control overthe polling schedule

service javaxxmlnamespaceQName The qualified name of theservice the endpoint exposes

stateless boolean When set toltcodegtfalseltcodegt

targetEndpoint javalangString the name of the endpoint towhich requests are sent

targetInterface javaxxmlnamespaceQName the QName of the interface towhich requests are sent

targetOperation javaxxmlnamespaceQName Set the operation to beinvoked on the target service

targetService javaxxmlnamespaceQName the QName of the service towhich requests are sent

targetUri javalangStringSet the target serviceendpointinterface using aURI

uri javanetURI Configures the endpoint froma URI

ftpsender

Endpoint properties

Specifies if the endpoint shouldcreate the target directory if itdoes not already exist If you setthis to ltcodegtfalseltcodegt andthe directory does not exist theendpoint will not do anythingDefault value isltcodegttrueltcodegt

checkDuplicates booleanSpecifies whether duplicatesshould be checked Defaults toltcodegttrueltcodegt

clientPool orgapacheservicemixftpFTPClientPool

Set a custom FTPClientPool If thisproperty has not been set the FTPclient pool will be created based onthe information provided in theURI

component orgapacheservicemixftpFtpComponent

Set a custom FileMarshalerimplementation to control how thefile contents is being translatedinto a JBI message The defaultimplementation reads XMLcontents from the file

overwrite boolean

Specifies if a file with the samename already exists on the FTPserver the file should beoverwritten Defaults toltcodegtfalseltcodegt

uniqueFileName javalangStringSets the name used to make aunique name if no file name isavailable on the message

uploadPrefix javalangString

Set the file name prefix usedduring upload The prefix will beautomatically removed as soon asthe upload has completed Thisallows other processes to discerncompleted files from files that arebeing uploaded

uploadSuffix javalangString

Set the file name suffix usedduring upload The suffix will beautomatically removed as soon asthe upload has completed Thisallows other processes to discerncompleted files from files that arebeing uploaded

uri javanetURI Configures the endpoint from a URI

Examples

Using ftppool to configure the FTP connections

In order to gain more control over the FTP connection parameters (activepassive timeout ) thatare being used you can define your own FTP connection pool Afterward you can refer to the poolobject from both a sender and poller endpoint

ltxml version=10gtltbeansltbeans xmlnsftp=httpservicemixapacheorgftp10

xmlnssample=urnservicemixexamplegtgt

ltftpsenderltftpsender service=samplesender endpoint=endpointuri=ftplocalhostmyfolderclientPool=clientPoolgtgt

ltftppoolltftppool id=clientPool username=myname password=$ecretdataTimeout=90000 gtgt

ltbeansgtltbeansgt

The table below shows the full list of options offered by ftppool

address javanetInetAddress Set the remote internet address to connect to

binaryMode boolean Use binary mode transfers Defaults toltcodegttrueltcodegt

config orgapachecommonsnetftpFTPClientConfigConfigure a custom FTPClientConfig instanceto allow more fine-grained control over theFTP connections in the pool

controlEncoding javalangStringConfigure the encoding used in the FTPcontrol connections Defaults toltcodegtISO-8859-1ltcodegt

dataTimeout intSpecifies a timeout used on the FTP dataconnection Defaults toltcodegt120000ltcodegt

host javalangString Set the remote host name to connect to

localAddress javanetInetAddress Set the local IP address to be used whenestablishing the connection

localPort int Set the local TCPIP port to be used whenestablishing the connection

passiveMode boolean Use passive mode FTP transfers Defaults toltcodegtfalseltcodegt

password javalangString Set the password for logging into the FTPserver

pool orgapachecommonspoolObjectPool Set a custom ObjectPool instance to use forthe connection pooling

port int Set the remote port number to connect to

username javalangString Set the login to use to access the FTP server

If you need even more fine-grained control over the FTP connections or the way the payloads arebeing handled have a look at the Camel FTP component which offers a lot of options out of thebox but also allows setting any property on its underlying Commons NET FTPClient andFTPClientConfig instances

210 servicemix-http

Overview

ServiceMix ships with a JBI compliant HTTPSOAP binding component named servicemix-http

Here are the main features

bull Integrated HTTP server based on Jetty 6

bull HTTP Client using Jakarta Commons HTTP Client

bull Highly performant and scalable using Jetty 6 continuations

bull WSDL based and XBean based deployments

bull SSL support

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorghttp10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnshttp=httpservicemixapacheorghttp10gtgt

lt-- add httpconsumer httpsoap-consumerhttpprovider and http soapprovider definitions here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-http component defines four endpoint type

httpconsumer This endpoint allows you to expose a service in the ESB to the outsideworld over HTTP Whenever it receives an HTTP request it will interact with the configuredservices on the ESB to provide the HTTP response

httpsoap-consumer Similar to httpconsumer but specifically geared towards handingSOAP requests and responses

httpprovider This endpoint allows you to access remote services from within the ESBIt will perform an external HTTP request whenever it receives a JBI MessageExchange

httpsoap-provider Similar to httpprovider but specifically geared towardsperforming SOAP requests

It also provides one additional legacy endpoints which are still available to ease migration fromServiceMix 3

httpendpoint (Deprecated) Legacy endpoint capable to acting as a consumer orprovider based on the configuration

httpendpoint

Endpoint properties

authMethod javalangString

a stringnaming thescheme usedforauthenticatingusers

basicAuthentication orgapacheservicemixhttpBasicAuthCredentials

authenticationdata for usingbasic HTTPauthentication

binding javaxwsdlextensionsExtensibilityElement

defaultMep javanetURI

defaultOperation javaxxmlnamespaceQName

description orgw3cdomDocument

dynamic boolean

endpoint javalangString The name ofthe endpoint

The qualifiedname of theinterfaceexposed bythe endpoint

locationURI javalangString

the URI towhich aproviderendpointsendsrequests

policies (javalangObject)

proxy orgapacheservicemixhttpProxyParameters

configurationused toestablish aproxy forsending HTTPrequests Thisconfigurationoverrides thatwhich is set atthecomponentlevel

responseContentTypeCheck boolean

Specifies if thehttp providerchecks theresponsecontent typefor the

role javalangString

HTTPendpoints canbe eitherconsumers orprovidersSpecifying

roleAsString javalangString

service javaxxmlnamespaceQName

The qualifiedname of theservice theendpointexposes

soap boolean

soapAction javalangString

soapVersion javalangString

ssl orgapacheservicemixhttpSslParameters

a beancontaining theSSLconfigurationproperties

synchronous boolean

targetEndpoint javalangString

targetInterfaceName javaxxmlnamespaceQName

targetService javaxxmlnamespaceQName

timeout int

the number ofmillisecondsbefore theendpointtimes out Thedefault valueis 0 whichmeans that theendpoint willnever timeout

wantContentTypeHeaderFromExchangeIntoHttpRequest boolean

Specifies if theHTTP providerwill copy theHTTP requestheaders intothe JBI

httpconsumer

Endpoint properties

authMethod javalangString a string naming the schemeused for authenticating users

defaultMep javanetURIa URI representing theendpoints default MEP Thedefault is

locationURI javalangString the URI at which the endpointlistens for requests

marshaler orgapacheservicemixhttpendpointsHttpConsumerMarshalerthe bean used to marshalHTTP messages The defaultis a

ssl orgapacheservicemixhttpSslParameters a bean containing the SSLconfiguration properties

targetOperation javaxxmlnamespaceQName the QName of the operationto which requests are sent

timeout longthe timeout is specified inmilliseconds The defaultvalue is 0 which

httpprovider

Endpoint properties

clientSoTimeout int

the number ofmilliseconds theendpoint will blockwhile attempting toread a request Thedefault value is 60000Setting this to 0specifies that theendpoint will nevertimeout

credentials javalangString The authenticationcredentials

expectGzippedResponse boolean

If true the accept-encoding http headerwill be set to gzip andthe response will beun-gzipped

gzipRequest boolean

If true the requestcontent will be gzippedand sent over the wireThe content-encodinghttp header will also beset to gzip

interfaceName javaxxmlnamespaceQNameThe qualified name ofthe interface exposedby the endpoint

locationURI javalangStringthe URI to which theendpoint sendsrequests

marshaler orgapacheservicemixhttpendpointsHttpProviderMarshaler

the bean used tomarshal HTTPmessages The defaultis a

principal javalangString The authenticationprincipal

providerExpirationTime int

the number ofmilliseconds to wait fora response beforeexpiring

proxyHost javalangString the host name of theHTTP proxy

proxyPassword javalangStringthe password for theHTTP proxyauthentication

proxyPort intthe host port of theHTTP proxy (defaultsto 80)

proxyUsername javalangStringthe user name for theHTTP proxyauthentication

service javaxxmlnamespaceQNameThe qualified name ofthe service theendpoint exposes

ssl orgapacheservicemixhttpSslParameters the SSL parameters

httpsoap-consumer

Endpoint properties

policies (orgapacheservicemixsoapapiPolicy)a list of interceptors that willprocess messages

soapVersion javalangStringSpecifies the SOAP version touse when generating a wsdlbinding for

useJbiWrapper booleanSpecifies if the JBI wrapper issent in the body of themessage Default is

validateWsdl boolean

Specifies if the WSDL ischecked for WSI-BPcompliance Default isltcodegttrueltcodegt

wsdl orgspringframeworkcoreioResourcethe URL of the WSDLdocument defining theendpoints messages

httpsoap-provider

Endpoint properties

clientSoTimeout intthe number ofmilliseconds theendpoint will block

while attempting toread a request Thedefault value is 60000Setting this to 0specifies that theendpoint will nevertimeout

gzipRequest boolean

policies (orgapacheservicemixsoapapiPolicy)a list of interceptorsthat will processmessages

useJbiWrapper boolean

Specifies if the JBIwrapper is sent in thebody of the messageDefault is

211 servicemix-jms

Overview

ServiceMix ships with a JBI compliant JMS binding component named servicemix-jms

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgjms10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnsjms=httpservicemixapacheorgjms10gtgt

lt-- add jmsconsumer jmssoap-consumer jmsjca-consumerjmsprovider jmssoap-provider and jmsjca-provider definitions here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-jms component defines six endpoint type

jmsconsumer This endpoint allows you to expose a service in the ESB to the outsideworld over JMS Whenever it receives a JMS message it will interact with the configuredservices on the ESB

jmssoap-consumer Similar to jmsconsumer but specifically geared towards handingSOAP requests and responses

jmsjca-consumer Similar to jmsconsumer but adds the possibility of using a JCAresource adapter

jmsprovider This endpoint allows you to access remote services from within the ESB Itwill send a JMS message whenever it receives a JBI MessageExchange

jmssoap-provider Similar to jmsprovider but specifically geared towardsperforming SOAP requests

jmsjca-provider Similar to jmsprovider but adds the possibility of using a JCAresource adapter

jmsendpoint (Deprecated) Legacy endpoint capable to acting as a consumer orprovider based on the configuration

jmsendpoint

Endpoint properties

activationSpec javaxresourcespiActivationSpec The ActivationSpec to use on a JCAconsumer endpoint

bootstrapContext javaxresourcespiBootstrapContext The BootstrapContext to use for a JCAconsumer endpoint

connectionFactory javaxjmsConnectionFactory A configured ConnectionFactory touse on this endpoint

destination javaxjmsDestination A configured Destination to use onthis endpoint

destinationStyle javalangString

Specifies the destination type usedwith the jmsProviderDestinationNameCan be ltcodegtqueueltcodegt orltcodegttopicltcodegt

dynamic boolean

initialContextFactory javalangString The class name of the JNDIInitialContextFactory to use

jmsProviderDestinationName javalangString

The name of the destination createdby a call toltcodegtSessioncreateQueueltcodegtorltcodegtSessioncreateTopicltcodegtThis property is used whenltcodegtdestinationltcodegt andltcodegtjndiDestinationNameltcodegtare both ltcodegtnullltcodegt

jmsProviderReplyToName javalangStringThe name of the reply destinationcreated by a call toltcodegtSessioncreateQueueltcodegt

orltcodegtSessioncreateTopicltcodegtThis property is used whenltcodegtjndiReplyToNameltcodegt isltcodegtnullltcodegt A temporaryqueue will be used if a replyTo is notprovided

jndiConnectionFactoryName javalangString

The name of the JMSConnectionFactory to lookup in JNDIUsed ifltcodegtconnectionFactoryltcodegt isltcodegtnullltcodegt

jndiDestinationName javalangString

The name of the JMS Destination tolookup in JNDI Used ifltcodegtdestinationltcodegt isltcodegtnullltcodegt

jndiProviderURL javalangString The provider URL used to create theJNDI context

jndiReplyToName javalangString

The name of the JMS Reply-todestination to lookup in JNDI If thisproperty is not set a temporaryreplyTo queue is used

marshaler orgapacheservicemixjmsJmsMarshaler

Specifies the class implementing thelogic for marshaling and unmarshalingmessages between the JMS destinationand the endpoint Defaults toltcodegtDefaultJmsMarshalerltcodegt

needJavaIdentifiers booleanIndicates if the JMS properties used bythe endpoint need to be speccompliant

processorName javalangString

Specifies the processor family to usefor this endpoint Can be ltulgtltligtltcodegtmultiplexingltcodegt(default)ltligtltligtltcodegtstandardltcodegtltligtltligtltcodegtjcaltcodegtltligt ltulgt

resourceAdapter javaxresourcespiResourceAdapter The ResourceAdapter to use on a JCAconsumer endpoint

role javalangString

Specifies the role of this endpointEndpoints can beltcodegtconsumerltcodegt orltcodegtproviderltcodegt

rollbackOnError boolean Indicates if the JBI exchange is rolledback if an error is encountered

soap boolean

store orgapacheservicemixstoreStoreSpecifies a persistent data store tohold pending exchanges for theendpoint

storeFactory orgapacheservicemixstoreStoreFactorySpecifies the factory used to createpresistent data stores for thisendpoint

synchronous boolean

Indicates if a JCA consumer endpointsends the JBI exchange synchronouslyor asynchronously This changes thetransaction boundary

useMsgIdInResponse boolean

Indicates whether the message id ofthe request message should be usedas the correlation id in the responseor the correlation id of the request

jmsconsumer

Endpoint properties

cacheLevel int

Specifies the level of caching allowed by thelistener Valid values are 0 through 3 Thevalues map to the following ltulgt ltligt0 -ltcodegtCACHE_NONEltcodegtltligt ltligt1 -ltcodegtCACHE_CONNECTIONltcodegtltligtltligt2 -ltcodegtCACHE_SESSIONltcodegtltligt ltligt3- ltcodegtCACHE_CONSUMERltcodegtltligtltulgt The default isltcodegtCACHE_NONEltcodegtltbrgt Thisproperty only effects consumers whoseltcodegtlistenerTypeltcodegt property is setto ltcodegtdefaultltcodegt

clientId javalangStringSpecifies the JMS client id for a sharedltcodegtConnectionltcodegt created andused by this listener

concurrentConsumers int

Specifies the number of concurrentconsumers created by the listener Thisproperty is only used for consumers whoseltcodegtlistenerTypeltcodegt property is setto either ltcodegtsimpleltcodegt orltcodegtdefaultltcodegt

connectionFactory javaxjmsConnectionFactorySpecifies theltcodegtConnectionFactoryltcodegt used bythe endpoint

destination javaxjmsDestination Specifies the JMS ltcodegtDestinationltcodegtused to receive messages

destinationChooser orgapacheservicemixjmsendpointsDestinationChooser Specifies a class implementing logic forchoosing reply destinations

destinationName javalangString

Specifies a string identifying the JMSdestination used to recieve messages Thedestination is resolved using theltcodegtDesitinationResolverltcodegt

destinationResolver orgspringframeworkjmssupportdestinationDestinationResolver

Specifies the class implementing logic forconverting strings into destinations Thedefault isltcodegtDynamicDestinationResolverltcodegt

durableSubscriptionName javalangString Specifies the name used to register thedurable subscription

exceptionListener javaxjmsExceptionListener Specifies anltcodegtExceptionListenerltcodegt to notify

in case of a ltcodegtJMSExceptionltcodegt isthrown by the registered message listener orthe invocation infrastructure

idleTaskExecutionLimit int

Specifies the limit for idle executions of areceive task not having received any messagewithin its execution If this limit is reachedthe task will shut down and leave receiving toother executing tasks (in case of dynamicscheduling see themaxConcurrentConsumers setting) Withineach task execution a number of messagereception attempts (according to themaxMessagesPerTask setting) will each waitfor an incoming message (according to thereceiveTimeout setting) If all of thosereceive attempts in a given task returnwithout a message the task is considered idlewith respect to received messages Such atask may still be rescheduled however onceit reached the specifiedidleTaskExecutionLimit it will shut down (incase of dynamic scaling) Raise this limit ifyou encounter too frequent scaling up anddown With this limit being higher an idleconsumer will be kept around longeravoiding the restart of a consumer once anew load of messages comes in Alternativelyspecify a higher maxMessagePerTask andor receiveTimeout value which will also leadto idle consumers being kept around for alonger time (while also increasing the averageexecution time of each scheduled task)

jmsprovider

Endpoint properties

deliveryMode intSpecifies the JMS delivery mode used for thereply Defaults to(2)(ltcodegtPERSISTENTltcodegt)

destination javaxjmsDestination Specifies the JMS ltcodegtDestinationltcodegtused to send messages

destinationChooser orgapacheservicemixjmsendpointsDestinationChooserSpecifies a class implementing logic forchoosing the destination used to sendmessages

Specifies a string identifying the JMSdestination used to send messages Thedestination is resolved using theltcodegtDesitinationResolverltcodegt

explicitQosEnabled booleanSpecifies if the QoS values specified for theendpoint are explicitly used when a messagesis sent The default is ltcodegtfalseltcodegt

jms102 boolean Determines if the provider used JMS 102compliant APIs

marshaler orgapacheservicemixjmsendpointsJmsProviderMarshaler

Specifies the class implementing the messagemarshaler The message marshaller isresponsible for marshalling andunmarshalling JMS messages The default isltcodegtDefaultProviderMarshalerltcodegt

messageIdEnabled boolean

Specifies if your endpoint requires JMSmessage IDs Setting theltcodegtmessageIdEnabledltcodegt propertyto ltcodegtfalseltcodegt causes the endpointto call its message producersltcodegtsetDisableMessageID() ltcodegt witha value of ltcodegttrueltcodegt The JMSbroker is then given a hint that it does notneed to generate message IDs or add them tothe messages from the endpoint The JMSbroker can choose to accept the hint orignore it

messageTimestampEnabled boolean

Specifies if your endpoints requires timestamps on its messages Setting theltcodegtmessageTimeStampEnabledltcodegtproperty to ltcodegtfalseltcodegt causes theendpoint to call its message producersltcodegtsetDisableMessageTimestamp()ltcodegt method with a value ofltcodegttrueltcodegt The JMS broker is thengiven a hint that it does not need to generatemessage IDs or add them to the messagesfrom the endpoint The JMS broker canchoose to accept the hint or ignore it

preserveMessageQos boolean

Specifies whether we want to send messageusing the QoS settings specified on themessage instead in order to preservemessage QoS The default isltcodegtfalseltcodegt

priority int Specifies the priority assigned to the JMSmessages Defaults to 4

pubSubDomain boolean

Specifies if the destination is a topicltcodegttrueltcodegt means the destinationis a topic ltcodegtfalseltcodegt means thedestination is a queue

pubSubNoLocal boolean

Specifies if messages published by thelisteners ltcodegtConnectionltcodegt aresuppressed The default isltcodegtfalseltcodegt

receiveTimeout long Specifies the timeout for receiving a messagein milliseconds

replyDestination javaxjmsDestination

Sets the reply destination This JMSdestination will be used as the defaultdestination for the response messages whenusing an InOut JBI exchange It will be used ifthe ltcodegtreplyDestinationChooserltcodegtdoes not return any value

replyDestinationChooser orgapacheservicemixjmsendpointsDestinationChooserSpecifies a class implementing logic forchoosing the destination used to recievereplies

replyDestinationName javalangString

Sets the name of the reply destination Thisproperty will be used to create theltcodegtreplyDestinationltcodegt using theltcodegtdestinationResolverltcodegt whenthe endpoint starts if theltcodegtreplyDestinationltcodegt has notbeen set

Sets the store used to store JBI exchangesthat are waiting for a response JMS messageThe store will be automatically created if notset

Sets the store factory used to create thestore If none is set a linkMemoryStoreFactory will be created and usedinstead

timeToLive long Specifies the number of milliseconds amessage is valid

jmssoap-consumer

Endpoint properties

cacheLevel int

exceptionListener javaxjmsExceptionListener

Specifies anltcodegtExceptionListenerltcodegt to notifyin case of a ltcodegtJMSExceptionltcodegt isthrown by the registered message listener orthe invocation infrastructure

jmssoap-provider

Endpoint properties

destinationName javalangString Specifies a string identifying the JMSdestination used to send messages The

destination is resolved using theltcodegtDesitinationResolverltcodegt

policies (orgapacheservicemixsoapapiPolicy)Specifies an array of interceptors used toprocess SOAP messages

useJbiWrapper booleanSpecifies if the endpoint expects SOAPmessages to be wrapped in the JBI wrapperDefaults to ltcodegttrueltcodegt

validateWsdl boolean Specifies if the WSDL is checked WSI-BPcompliance Defaults to ltcodegttrueltcodegt

wsdl orgspringframeworkcoreioResource Specifies the WSDL document describing theservices interface

jmsjca-consumer

Endpoint properties

activationSpec javaxresourcespiActivationSpec Specifies the activation information neededby the endpoint

bootstrapContext javaxresourcespiBootstrapContext

Specifies theltcodegtBootStrapContextltcodegt used tostart the resource adapter If this property isnot set a defaultltcodegtBootstrpContextltcodegt will becreated

destinationResolver orgspringframeworkjmssupportdestinationDestinationResolver Specifies the class implementing logic forconverting strings into destinations The

default isltcodegtDynamicDestinationResolverltcodegt

jms102 booleanSpecifies if the consumer uses JMS 102compliant APIs Defaults toltcodegtfalseltcodegt

marshaler orgapacheservicemixjmsendpointsJmsConsumerMarshaler

Specifies the class implementing the messagemarshaler The message marshaller isresponsible for marshalling andunmarshalling JMS messages The default isltcodegtDefaultConsumerMarshalerltcodegt

replyDeliveryMode intSpecifies the JMS delivery mode used for thereply Defaults to2(ltcodegtPERSISTENTltcodegt)

Specifies the JMS ltcodegtDestinationltcodegtfor the replies If this value is not set theendpoint will use theltcodegtdestinationChooserltcodegt propertyor the ltcodegtreplyDestinationNameltcodegtproperty to determine the desitination to use

Specifies the name of the JMS destination touse for the reply The actual JMS destinationis resolved using theltcodegtDestinationResolverltcodegtspecified by theltcodegtdestinationResolverltcodegtproperty

replyExplicitQosEnabled booleanSpecifies if the QoS values specified for theendpoint are explicitly used when the reply issent The default is ltcodegtfalseltcodegt

replyPriority int Specifies the JMS message priority of thereply Defaults to 4

replyProperties javautilMap Specifies custom properties to be placed inthe replys JMS header

replyTimeToLive long Specifies the number of milliseconds the replymessage is valid The default is unlimited

resourceAdapter javaxresourcespiResourceAdapter Specifies the resource adapter used for theendpoint

stateless booleanSpecifies if the consumer retains stateinformation about the message exchangewhile it is in process

Specifies the persistent store used to store JBIexchanges that are waiting to be processedThe store will be automatically created if notset and the endpointsltcodegtstatelessltcodegt property is set toltcodegtfalseltcodegt

Specifies the store factory used to create thestore If none is set and the endpointsltcodegtstatelessltcodegt property is set toltcodegtfalseltcodegt a link

MemoryStoreFactory will be created and usedinstead

synchronous boolean

Specifies if the consumer will block whilewaiting for a response This means theconsumer can only process one message at atime Defaults to ltcodegttrueltcodegt

targetInterface javaxxmlnamespaceQName the QName of the interface to which requestsare sent

useMessageIdInResponse javalangBoolean

Specifies if the request messages ID is usedas the replys correlation ID The defaultbehavior is to use the requests correlation IDSetting this to ltcodegttrueltcodegt meansthe requests message ID will be used instead

212 servicemix-mail

Overview

he ServiceMix Mail component provides support for receiving and sending mails via the enterpriseservice bus

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgmail10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnsmail=httpservicemixapacheorgmail10gtgt

lt-- add mailpoller and mailsender definitions here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-mail component defines two endpoint type

mailpoller Connect to a POP3 or IMAP server and send a MessageExchange for everymail

mailsender Connect to an SMTP server and send a mail for every JBI MessageExchangeit receives

mailpoller

Endpoint properties

concurrentPolling boolean Sets whether more than one poll can be active at a time (true means yes) Defaultvalue is ltcodegtfalseltcodegt

connection javalangString

ltpgtSpecifies the connection URI used to connect to a mail server ltbr gtltbr gtltbgtltugtTemplatesltugtltbgt ltbr gtnbsp igtltrotocolgtltsergtltostgtltortgtltoldergtpassword=ltasswordgtigt ltbr

gtltbgt nbsp nbsp nbspORltbgtltbrgtnbsp igtltrotocolgtltostgtltortgtltoldergtuser=ltsergtpassword=ltasswordgtigt

ltbr gtltbr gt ltbgtltugtDetailsltugtltbgtltbr gtltbrgt lttable border=0cellpadding=0 cellspacing=0gt lttrgt lttd width=40align=leftgtltbgtltugtNameltugtltbgtlttdgt lttd width=60align=leftgtltbgtltugtDescriptionltugtltbgtlttdgt lttrgt lttrgtlttdgtprotocollttdgt lttdgtthe protocol to use (example pop3 or imap)lttdgtlttrgt lttrgt lttdgtuserlttdgt lttdgtthe user name used to log into an accountlttdgtlttrgt lttrgt lttdgthostlttdgt lttdgtthe name or ip address of the mail serverlttdgtlttrgt lttrgt lttdgtportlttdgt lttdgtthe port number to use (optional)lttdgt lttrgtlttrgt lttdgtfolderlttdgt lttdgtthe folder to poll from (optional)lttdgt lttrgt lttrgtlttdgtpasswordlttdgt lttdgtthe password for the loginlttdgt lttrgt lttablegtltbrgt ltbgtltugtExamplesltugtltbgtltbr gtnbsp igtimaplheinimapserver143INBOXpassword=mypassltigtltbr gtnbsp igtpop3pop3server

INBOXuser=memyhomeorgpassword=mypassltigtltpgt ltigt nbsp he defaultvalue is ltbgtnullltbgtltigtltbrgtltbrgt

customProperties javautilMap

ltpgtSpecifies a ltcodegtjavautilMapltcodegt which may contain additionalproperties for the connection ltbrgt ltbrgtltbgtltugtExample for disabling TOP forPOP3 headersltugtltbgtltbr gt igtltbgtkeyltbgt mailpop3disabletopltigt ltbrgt igtltbgtvalueltbgt trueltigtltpgt ltigt nbsp he default value isltbgtnullltbgtltigtltbrgtltbrgt

customTrustManagers javalangString

ltpgtSpecifies one or more trust manager classes separated by a semicolon(ltbgtltbgt)ltbrgt These classes have to implement theltcodegtTrustmanagerltcodegt interface and need to provide an empty defaultconstructor to be validltbrgtltbr gt If you want to accept all security certificateswithout a check you may consider using the ltcodegtDummyTrustManagerltcodegtclass It is actually only an empty stub without any checking logic ltbrgtltbgtButbe aware that this will be a security risk in production environments ltbgtltpgtltigt nbsp he default value is ltbgtnullltbgtltigtltbrgtltbrgt

debugMode boolean

ltpgtSpecifies if the JavaMail is run in ltcodegtDEBUGltcodegt mode This meansthat while connecting to server and processing mails a detailed log is written todebug output ltbr gt This mode is very handy if you are experiencing problemswith your mail server connection and you want to find out what is going wrong incommunication with the server ltbr gtltbr gt nbsp bgttrueltbgt - ltigtthe debugmode is ltbgtenabledltbgtltigt ltbr gt nbsp bgtfalseltbgt - ltigtthe debug modeis ltbgtdisabledltbgtltigtltpgt ltigt nbsp he default value isltbgtfalseltbgtltigtltbrgtltbrgt

deleteProcessedMessages boolean

ltpgtThis flag is used to indicate what happens to a processed mail polled from amail folder If it is set to ltcodegttrueltcodegt the mail will be deleted after it wassent into the bus successfully If set to ltcodegtfalseltcodegt the mail will resideinside the mail folder but will be marked as already seenltbrgt If the sending ofthe mail results in an error the mail will not be deleted marked and reprocessedon next run of the polling cycleltpgt ltigt nbsp he default value isltbgtfalseltbgtltigt

firstTime javautilDate Sets the date on which the first poll will be executed If a delay is also set usingltcodegtsetDelayltcodegt the delay interval will be added after the date specified

marshaler orgapacheservicemixmailmarshalerAbstractMailMarshaler

ltpgtWith this method you can specify a marshaler class which provides the logicfor converting a mail into a normalized message This class has to extend theabstract class ltcodegtAbstractMailMarshalerltcodegt or an extending class If youdont specify a marshaler the ltcodegtDefaultMailMarshalerltcodegt will beusedltpgt

maxFetchSize int

ltpgtThis sets the maximum amount of mails to process within one polling cycle Ifthe maximum amount is reached all other mails in unseen state will beskippedltpgt ltigt nbsp he default value is ltbgt-1(unlimited)ltbgtltigtltbrgtltbrgt

processOnlyUnseenMessages boolean

ltpgtThis flag is used to indicate whether all mails are polled from a mail folder oronly the unseen mails are processedltbrgtltbr gt If it is set toltbgtltcodegttrueltcodegtltbgt only the unseen mails will be processedltbr gt Ifit is set to ltbgtltcodegtfalseltcodegtltbgt all mails will be processedltbrgtltpgtltigt nbsp he default value is ltbgttrueltbgtltigtltbrgtltbrgt

scheduler orgapacheservicemixcommonschedulerScheduler Set a custom Scheduler implementation if you need more fine-grained control overthe polling schedule

storage orgapacheservicemixstoreStore

ltpgtSpecifies a ltcodegtorgapacheservicemixstoreStoreltcodegt object whichwill be used for storing the identifications of already processed messagesltbrgtltbgtThis store is only used with the POP3 protocol and if unseen mails areprocessed onlyltbgtltpgt ltigt nbsp he default value isltbgtnullltbgtltigtltbrgtltbrgt

mailsender

Endpoint properties

ltbr gtltbr gt ltbgtltugtDetailsltugtltbgtltbr gtltbrgt lttable border=0cellpadding=0 cellspacing=0gt lttrgt lttd width=40align=leftgtltbgtltugtNameltugtltbgtlttdgt lttd width=60align=leftgtltbgtltugtDescriptionltugtltbgtlttdgt lttrgt lttrgtlttdgtprotocollttdgt lttdgtthe protocol to use (example pop3 or imap)lttdgtlttrgt lttrgt lttdgtuserlttdgt lttdgtthe user name used to log into an accountlttdgtlttrgt lttrgt lttdgthostlttdgt lttdgtthe name or ip address of the mail serverlttdgtlttrgt lttrgt lttdgtportlttdgt lttdgtthe port number to use (optional)lttdgt lttrgtlttrgt lttdgtfolderlttdgt lttdgtthe folder to poll from (optional)lttdgt lttrgt lttrgtlttdgtpasswordlttdgt lttdgtthe password for the loginlttdgt lttrgt lttablegtltbrgt ltbgtltugtExampleltugtltbgtltbr gtnbsp igtsmtplheinmyserverpassword=myPassltigtltbr gtltpgt

ltigt nbsp he default value is ltbgtnullltbgtltigtltbrgtltbrgt

debugMode boolean

ignoreMessageProperties (javalangObject)

ltpgtSpecifies a ltcodegtjavautilListltcodegt which may contain messageproperties to skip ltbrgt ltbrgtltbgtltugtExample for skipping all kind ofaddresses from the normalized messageltugtltbgtltbr gt igtltbgtvalueltbgtorgapacheservicemixmailtoltigt ltbr gt igtltbgtvalueltbgtorgapacheservicemixmailccltigt ltbr gt igtltbgtvalueltbgtorgapacheservicemixmailbccltigt ltbr gt igtltbgtvalueltbgtorgapacheservicemixmailfromltigt ltbr gt igtltbgtvalueltbgtorgapacheservicemixmailreplytoltigt ltbr gtltpgt ltigt nbsp he default valueis ltbgtnullltbgtltigtltbrgtltbrgt

ltpgtWith this method you can specify a marshaler class which provides the logicfor converting a normalized message into a mail This class has to extend theabstract class ltcodegtAbstractMailMarshalerltcodegt or an extending class If youdont specify a marshaler the ltcodegtDefaultMailMarshalerltcodegt will beusedltpgt

receiver javalangString ltpgtSpecifies the receiver address(es) of the mail which is being sentltpgtltigt nbsp he default value is ltbgtnullltbgtltigtltbrgtltbrgt

sender javalangString ltpgtSpecifies the sender address of the mail which is being sentltpgtltigt nbsp he default value is ltbgtno-replylocalhostltbgtltigtltbrgtltbrgt

213 servicemix-osworkflow

Overview

The ServiceMix OSWorkflow component provides workflow functionality to the ESB You can specifyone or more workflows and its processing will start when a valid message is received

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgosworkflow10 This is an example of an xbeanxml file with a namespace definition with prefixbean

ltbeansltbeans xmlnsosworkflow=httpservicemixapacheorgosworkflow10gtgt

lt-- add osworkflowendpoint here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-osworkflow component defines a single endpoint type

osworkflowendpoint The endpoint will receive messages from the NMR and will thenstart the processing of the workflow

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

action int The initial action to trigger in the workflow

caller javalangString The caller user name to be used when executing the workflow

workflowName javalangString The name of the workflow to be used for handling theexchange

214 servicemix-quartz

Overview

The servicemix-quartz component is a standard JBI Service Engine able to schedule and trigger jobsusing the great Quartz scheduler

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgquartz10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnsosworkflow=httpservicemixapacheorgquartz10gtgt

lt-- add quartzendpoint here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-quartz component defines a single endpoint type

quartzendpoint The quartz endpoint can be used to fire message exchanges at a given(recurrent) time

quartzendpoint

Endpoint properties

calendars javautilMapA map with linkorgquartzCalendar instances todefine the trigger schedule

jobDetail orgquartzJobDetail Set a custom JobDetail bean to beused in the triggered events

marshaler orgapacheservicemixquartzsupportQuartzMarshalerSet a custom marshaler class totranslate the JobDetail informationinto a normalized message

targetEndpoint javalangString the name of the endpoint to whichrequests are sent

targetService javaxxmlnamespaceQName the QName of the service to whichrequests are sent

trigger orgquartzTriggerA single link orgquartzTriggerinstance to define the triggerschedule

triggers (javalangObject)

A list of of link orgquartzTriggerinstances to allow configuringmultiple schedules for the sameendpoint

215 servicemix-saxon

Overview

The servicemix-saxon component is a standard JBI Service Engine for XSLT XQuery Thiscomponent is based on Saxon and supports XSLT 20 and XPath 20 and XQuery 10

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgsaxon10 This is an example of xbeanxml file with a namespace definition with prefix saxon

ltbeansltbeans xmlnssaxon=httpservicemixapacheorgsaxon 10gtgt

lt-- add saxonxslt saxonxquery or saxonproxy definitions here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-saxon component defines these endpoints

bull saxonxslt Translates the in message content using XSLT to send back the translatedcontent in the out message

bull saxonproxy Acts as a proxy for an endpoint translating the message passed tofrom theendpoint using XSLT

bull saxonxquery Use xquery to extract parts of the XML

Endpoint saxonxslt

The XSLT endpoint can be used to apply an XSLT stylesheet to the incoming exchange and willreturn the transformed result as the output message

ltsaxonxsltltsaxonxslt service=testxslt endpoint=endpointresource=classpathtransformxsl gtgt

Endpoint properties

configuration netsfsaxonConfiguration Additional configuration for theSaxon XSL-TXQuery processor

Copy attachments into theresulting normalized messageDefaults toltcodegttrueltcodegt

Copy properties into theresulting normalized messageDefaults toltcodegttrueltcodegt

copySubject boolean

Copy the security subject intothe resulting normalizedmessage Defaults toltcodegttrueltcodegt

expression orgapacheservicemixexpressionExpressionExpression to dynamicallydetermine the stylesheet to usefor processing the exchange

parameters javautilMapAdd parameter names andvalues that are available duringXSLXQuery processing

reload boolean

Sets whether the endpointshould reload the resource eachtime it is used A value ofltcodegttrueltcodegt willensure that the resource is notcached which can be useful ifthe resource is updatedregularly and is stored outsideof the service unit

resource orgspringframeworkcoreioResource Spring Resource for the XSL-Tstylesheet or XQuery file to use

result javalangStringThe output result type possiblevalues are dom bytes stringDefaults to dom

sourceTransformer orgapacheservicemixjbijaxpSourceTransformerSet a SourceTransformerinstance to use for handlingXML conversions

transformerFactory javaxxmltransformTransformerFactory

Set a transform factory eg forinjecting a custom transformerconfiguration orimplementation

useDomSourceForContent javalangBoolean

Convert the message bodySource into a DOMSourceDefaults toltcodegtfalselttruegt

useDomSourceForXslt boolean

Convert the XSL-T stylesheetSource into a DOMSourceDefaults toltcodegttruelttruegt

wsdlResource orgspringframeworkcoreioResourceResource referring to the WSDLresource that defines thisendpoint

Mandatory properties

The endpoint requires one of these two properties to be specified

Attribute Type description

resource (Spring resource) the spring resource pointing to the XSLT stylesheet

expression (ServiceMix expression) expression used to dynamically load the stylesheet

Optional properties

wsdlResource (Spring resource)if set the wsdl will be retrieved from the given Springresource

transformerFactory(TransformerFactorydefaults to the Saxonimplementation)

TraX factory to create transformers

configuration (Saxon configuration) Saxon configuration object

result (String defaults to dom)Allows specifying the output result type possiblevalues are dom bytes string

copyAttachmentscopyProperties andcopySubject

(default to true Configure to copy message attachments properties andsecurity subject over to the result message

useDomSourceForXslt (defaults to truewhen set to true forces the transformation of the xsltstylesheet into a DOM document before giving it to thetransformer

useDomSourceForContent (defaults to false)when set to true forces the transformation of theincoming JBI message into a DOM document beforegiving it to the transformer

parameters a Map containing additional parameters to give to thetransformation engine

Using properties and parameters

All properties defined on the JBI exchange and input JBI message will be available for use inside theXSLT stylesheet as parameters

In addition to those properties and the one specified in the parameters property on the endpointthe following objects are also available

bull exchange the JBI exchange

bull in the input JBI NormalizedMessage

bull component the XsltEndpoint instance being called

Below is an example that demonstrates how the properties of the exchange and normalizedmessage can be accessed from inside the xslt

ltxml version=10 encoding=windows-1253gtltxslstylesheetltxslstylesheet xmlnsxsl=httpwwww3org1999XSLTransform version=20

xmlnsclass=httpsaxonsfnetjava-typexmlnsme=javajavaxjbimessagingMessageExchangexmlnsnm=javajavaxjbimessagingNormalizedMessagegtgt

ltxsloutputltxsloutput method=xml indent=yes encoding=ISO-8859-1gtgtltxslparamltxslparam name=exchange as=classjavaxjbimessagingMessageExchangegtgtltxslparamltxslparam name=in as=classjavaxjbimessagingNormalizedMessagegtgt

ltxsltemplateltxsltemplate match=gtgtltmessagegtltmessagegt

lt-- The value of messageId will be read from thr property MSG_ID of the in NormalizedMessage --gtltmessageIdgtltmessageIdgt

ltxslvalue-ofltxslvalue-of select=nmgetProperty($in MSG_ID)gtgtltmessageIdgtltmessageIdgt

ltmessagegtltmessagegtltxslstylesheetgtltxslstylesheetgt

All those parameters can be accessed using XSLT standard ways using ltxslparamgt

Endpoint saxonproxy

One common use case is the need to transform a request coming from a service and send it toanother service and do the same with the response A simple example is the need to translate therequest and responses between two SOAP endpoints Such a use case could be implemented usingtwo XSLT endpoints and an EIP StaticRoutingSlip However there are some drawbacks as theoperation is lost in the process and a static routing slip can not be used to process InOnlyexchanges

ltsaxonproxyltsaxonproxy service=testproxy endpoint=endpointresource=classpathtransform-inxsloutResource=classpathtransform-outxslfaultResource=classpathtransform-faultxslgtgt

ltsaxontargetgtltsaxontargetgtltsaxonexchange-targetltsaxonexchange-target service=testecho gtgt

ltsaxontargetgtltsaxontargetgtltsaxonproxygtltsaxonproxygt

Endpoint properties

configuration netsfsaxonConfiguration Additional configuration for the Saxon XSL-TXQueryprocessor

copyAttachments boolean Copy attachments into the resulting normalized messageDefaults to ltcodegttrueltcodegt

copyProperties boolean Copy properties into the resulting normalized messageDefaults to ltcodegttrueltcodegt

copySubject boolean Copy the security subject into the resulting normalizedmessage Defaults to ltcodegttrueltcodegt

expression orgapacheservicemixexpressionExpression Expression to dynamically determine the stylesheet to usefor processing the exchange

faultResource orgspringframeworkcoreioResource Spring Resource for the XSL-T stylesheet or XQuery file touse for transforming the fault message

outResource orgspringframeworkcoreioResource Spring Resource for the XSL-T stylesheet or XQuery file touse for transforming the out message

parameters javautilMap Add parameter names and values that are available duringXSLXQuery processing

reload boolean

Sets whether the endpoint should reload the resource eachtime it is used A value of ltcodegttrueltcodegt will ensurethat the resource is not cached which can be useful if theresource is updated regularly and is stored outside of theservice unit

resource orgspringframeworkcoreioResource Spring Resource for the XSL-T stylesheet or XQuery file touse

result javalangString The output result type possible values are dom bytesstring Defaults to dom

sourceTransformer orgapacheservicemixjbijaxpSourceTransformer Set a SourceTransformer instance to use for handling XMLconversions

Configure a custom Store implementation to storecorrelation information Usually a store factory isconfigured instead of a store Defaults to linkorgapacheservicemixstorememoryMemoryStore

storeFactory orgapacheservicemixstoreStoreFactoryConfigure a custom StoreFactory implementation to storecorrelation information Defaults to linkorgapacheservicemixstorememoryMemoryStoreFactory

target orgapacheservicemixsaxonsupportExchangeTarget Set the target endpoint that is being proxied by theltcodegtxsltproxyltcodegt endpoint

transformerFactory javaxxmltransformTransformerFactory Set a transform factory eg for injecting a customtransformer configuration or implementation

useDomSourceForContent javalangBoolean Convert the message body Source into a DOMSourceDefaults to ltcodegtfalselttruegt

useDomSourceForXslt boolean Convert the XSL-T stylesheet Sources into a DOMSourceDefaults to ltcodegttruelttruegt

wsdlResource orgspringframeworkcoreioResource Resource referring to the WSDL resource that defines thisendpoint

Depending on the MEP you have to set one or more XSL stylesheets to be used for converting themessage payloads

Attribute Type Description

resource Springresource

the XSLT stylesheet used to transform the input message

outResource Springresource

the XSLT stylesheet used to transform the output message

faultResource Springresource

the XSLT stylesheet used to transform the fault message

expression ServiceMixexpression

used to dynamically load the stylesheet If set it will prevail against allresource outResource and faultResource attributes

You also have to specify the target service that should be invoked from this endpoint

bull target ExchangeTarget that specifies the target service for the proxy endpoint

Optional properties

wsdlResource Spring resourceif set the wsdl will beretrieved from the given(Spring resource)

transformerFactory (defaults to theSaxon implementation) TraXTransformerFactory to create transformers

configuration (Saxon configuration)

result(defaults to dom) Allows specifyingthe output result type possible valuesare dom bytes string

Endpoint saxonxquery

The XQuery endpoint can be used to apply a selected XQuery to the input document

ltsaxonxqueryltsaxonxquery service=testxquery endpoint=endpointresource=classpathqueryxq gtgt

Endpoint properties

configuration netsfsaxonConfiguration Additional configuration for the SaxonXSL-TXQuery processor

copyAttachments booleanCopy attachments into the resultingnormalized message Defaults toltcodegttrueltcodegt

copyProperties booleanCopy properties into the resultingnormalized message Defaults toltcodegttrueltcodegt

copySubject booleanCopy the security subject into theresulting normalized messageDefaults to ltcodegttrueltcodegt

expression orgapacheservicemixexpressionExpressionExpression to dynamically determinethe stylesheet to use for processing theexchange

outputProperties javautilProperties

Configure serialization properties inJAXP format if the result is to beserialized This parameter can bedefaulted to null

parameters javautilMapAdd parameter names and values thatare available during XSLXQueryprocessing

query javalangString Configure the XQuery expression toevaluate

reload boolean

Sets whether the endpoint shouldreload the resource each time it isused A value of ltcodegttrueltcodegtwill ensure that the resource is notcached which can be useful if theresource is updated regularly and isstored outside of the service unit

result javalangStringThe output result type possible valuesare dom bytes string Defaults todom

sourceTransformer orgapacheservicemixjbijaxpSourceTransformer Set a SourceTransformer instance touse for handling XML conversions

wsdlResource orgspringframeworkcoreioResource Resource referring to the WSDLresource that defines this endpoint

You need to specify one of query resource or expression

query String containing the inlined XQuery expression

resource Spring resource resource pointing to the XQuery

expression ServiceMix expression expression to dynamically load the xquery

Optional properties

wsdlResource (Springresource)

WSDL describing the endpoint

outputProperties Map Saxon specific output properties

configuration (Saxonconfiguration)

Saxon configuration object

result(defaults todom)

Allows specifying the output result type possible values aredom bytes string

(default totrue)

Configure to copy message attachments properties andsecurity subject over to the result message

Sample configurations

Dynamic stylesheet selection (saxonxslt)

This endpoint configuration will dynamically load the XSL-T resource that is specified in thexsltsource property on the NormalizedMessage

ltsaxonxsltltsaxonxslt service=testxslt-dynamic endpoint=endpointgtgtltsaxonexpressiongtltsaxonexpressiongtltbeanltbean class=orgapacheservicemixexpressionPropertyExpressiongtgtltpropertyltproperty name=property value=xsltsource gtgt

ltbeangtltbeangtltsaxonexpressiongtltsaxonexpressiongt

ltsaxonxsltgtltsaxonxsltgt

Using parameters in the XSL-T stylesheet (saxonxslt)

You can define a Map of parameters on the saxonxslt endpoint

ltsaxonxsltltsaxonxslt service=testxslt-params endpoint=endpointresource=classpathparameter-testxslgtgt

ltpropertyltproperty name=parametersgtgtltmapgtltmapgtltentryltentry key=stringParam value=cheeseyCheesegtgtltentryltentry key=integerParamgtgtltbeanltbean class=javalangIntegergtgtltconstructor-argltconstructor-arg index=0 value=4002gtgt

ltbeangtltbeangtltentrygtltentrygt

ltmapgtltmapgtltpropertygtltpropertygt

In the XSL file you can access the parameter values with ltxslparamgt You can also accessheaders on the NormalizedMessage (like eg orgapacheservicemixfile) with the same syntax

ltxslstylesheetltxslstylesheet xmlnsxsl=httpwwww3org1999XSLTransform version=10gtgtltxslparamltxslparam name=stringParamgtgtltxslparamltxslparam name=integerParamgtgtltxslparamltxslparam name=orgapacheservicemixfile gtgt

ltxslstylesheetgtltxslstylesheetgt

Inlined XQuery and specific output configuration (saxonxquery)

ltsaxonxqueryltsaxonxquery service=testxquery-inline endpoint=endpointgtgtltsaxonquerygtltsaxonquerygt

for $x in bookstorebookwhere $xprice gt 30return $xtitle

ltsaxonquerygtltsaxonquerygtltsaxonoutputPropertiesgtltsaxonoutputPropertiesgtltsaxonpropertyltsaxonproperty key=httpsaxonsfnetwrap-result-sequencegtgtyesltsaxonpropertygtltsaxonpropertygt

ltsaxonoutputPropertiesgtltsaxonoutputPropertiesgtltsaxonxquerygtltsaxonxquerygt

Dynamic XQuery selection (saxonxquery)

This endpoint configuration will dynamically load the XQuery resource that is specified in thexquerysource property on the NormalizedMessage

ltsaxonxqueryltsaxonxquery service=testxquery-dynamic endpoint=endpointgtgtltsaxonexpressiongtltsaxonexpressiongtltbeanltbean class=orgapacheservicemixexpressionPropertyExpressiongtgtltpropertyltproperty name=property value=xquerysource gtgt

ltsaxonxquerygtltsaxonxquerygt

216 servicemix-scripting

Overview

The ServiceMix Scripting component provides support for processing scripts using JSR-223compliant scripting languages

The component is currently shipping with

bull Groovy (156)

bull JRuby (112)

bull Rhino JavaScript (17R1)

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgscripting10 This is an example of an xbeanxml file with a namespace definition with prefixbean

ltbeansltbeans xmlnsscripting=httpservicemixapacheorgscripting10gtgt

lt-- add scriptingendpoint here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-scripting component defines a single endpoint type

scriptingendpoint The scripting endpoint can be used to use scripts to handleexchanges or send new exchanges

scriptingendpoint

Endpoint properties

bindings javautilMap

A Map with additionalvariables that are madeavailable during scriptexecution

copyAttachments booleanCopy the attachments into theout message Defaults toltcodegttrueltcodegt

copyProperties booleanCopy the properties into theout message Defaults toltcodegttrueltcodegt

disableOutput boolean

Set this flag to true toltcodegttrueltcodegt to avoidsending back a responsemessage Defaults toltcodegtfalseltcodegt

language javalangString

The scripting language to beused Defaults toltcodegtautodetectltcodegt todetermine the language by thescript file extension

logResourceBundle javalangStringThe resource bundle to usewhen logginginternationalized messages

marshaler orgapacheservicemixscriptingScriptingMarshalerSupport

Custom marshalerimplementation to handlestartupshutdown loading thescript code and registeringadditional user beans

script orgspringframeworkcoreioResource Spring Resource referring tothe script location

scriptLogger javautilloggingLogger returns the script logger

targetEndpoint javalangStringTarget endpoint for the outputexchange that is created bythe script

targetInterface javaxxmlnamespaceQNameTarget interface for the outputexchange that is created bythe script

targetOperation javaxxmlnamespaceQNameTarget operation for theoutput exchange that iscreated by the script

targetService javaxxmlnamespaceQNameTarget service for the outputexchange that is created bythe script

targetUri javalangString

URI for configuring targetserviceendpointinterface forthe exchange that is createdby the script

217 servicemix-snmp

Overview

The ServiceMix SNMP component provides support for receiving SNMP events via the enterpriseservice bus by using the SNMP4J library

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgsnmp10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnssnmp=httpservicemixapacheorgsnmp10gtgt

lt-- add snmppoller or snmpsender definitions here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-snmp component defines two endpoint types

snmppoller Periodically polls a device status using SNMP and sends the OIDs as a JBIMessageExchange

snmptrap-consumer Consumes an SNMP trap message and sends the OIDs as a JBIMessageExchange

snmppoller

Endpoint properties

address javalangString

ltpgtSpecifies the connection URI used to connectto a snmp capable device ltbr gtltbr gtltbgtltugtTemplateltugtltbgt ltbr gtnbsp igtltrotocolgtltostgtltortgtigt ltbr gtltbr gt

ltbgtltugtDetailsltugtltbgtltbr gtltbrgt lttableborder=0 cellpadding=0 cellspacing=0gtlttrgt lttd width=40align=leftgtltbgtltugtNameltugtltbgtlttdgt lttdwidth=60align=leftgtltbgtltugtDescriptionltugtltbgtlttdgt

lttrgt lttrgt lttdgtprotocollttdgt lttdgtthe protocolto use (udp or tcp)lttdgt lttrgt lttrgtlttdgthostlttdgt lttdgtthe name or ip address ofthe snmp capable devicelttdgt lttrgt lttrgtlttdgtportlttdgt lttdgtthe port number touselttdgt lttrgt lttablegt ltbrgtltbgtltugtExampleltugtltbgtltbr gtnbsp igtudp1921682122161ltigtltpgt

ltigt nbsp he default value isltbgtnullltbgtltigtltbrgtltbrgt

concurrentPolling booleanSets whether more than one poll can be active at atime (true means yes) Default value isltcodegtfalseltcodegt

delay long Sets the amount of time in milliseconds that theendpoint should wait before making the first poll

Sets the date on which the first poll will beexecuted If a delay is also set usingltcodegtsetDelayltcodegt the delay interval will beadded after the date specified

marshaler orgapacheservicemixsnmpmarshalerSnmpMarshalerSupport

ltpgtSpecifies a marshaler class which provides thelogic for converting a snmp response into anormalized message This class has to implementthe ltcodegtSnmpMarshalerSupportltcodegtinterface If you dont specify a marshaler theltcodegtDefaultSnmpMarshalerltcodegt will beusedltpgt

oids (javalangObject)

ltpgtSpecifies a reference to a list of OID valueswhich will be used for the snmp request You havetwo possibilities how to specify the value ltbrgtltbr gt igta) referencing to a file containing alist of OID values separated by a line feedltbrgt nbsp nbsporltbrgt igtb) defining a coma(ltbgtltbgt) separated list of OID values ltbrgtltbr gt ltbgtltugtExamplesltugtltbgtltbr gtnbsp igta) oids=classpathmyOidstxtltbr gtnbsp nbsp nbsp ids=filehomelheinsnmp

device_aoidstxtltbrgt ltbr gt nbsp igtb)oids=136121130 1361212532151 1361212535111 13612143511111ltigtltpgt ltigt nbsp hedefault value is ltbgtnullltbgtltigtltbrgtltbrgt

period long Sets the number of milliseconds between pollingattempts

retries intltpgtSpecifies the connection retriesltpgtltigt nbsp he default value isltbgt2ltbgtltigtltbrgtltbrgt

scheduler orgapacheservicemixcommonschedulerSchedulerSet a custom Scheduler implementation if youneed more fine-grained control over the pollingschedule

service javaxxmlnamespaceQName The qualified name of the service the endpointexposes

snmpCommunity javalangStringltpgtSpecifies the snmp community to useltpgtltigt nbsp he default value isltbgtpublicltbgtltigtltbrgtltbrgt

snmpVersion intltpgtSpecifies the snmp protocol version touseltpgt ltigt nbsp he default value is ltbgt0(version 1)ltbgtltigtltbrgtltbrgt

targetEndpoint javalangString the name of the endpoint to which requests aresent

targetInterface javaxxmlnamespaceQName the QName of the interface to which requests aresent

targetOperation javaxxmlnamespaceQName the QName of the operation to which requests aresent

targetService javaxxmlnamespaceQName the QName of the service to which requests aresent

targetUri javalangString Set the target serviceendpointinterface using aURI

timeout intltpgtSpecifies the connection time out inmillisecondsltpgt ltigt nbsp he default value isltbgt1500ltbgtltigtltbrgtltbrgt

vfstrap-consumer

Endpoint properties

218 servicemix-validation

Overview

The ServiceMix Validation component provides schema validation of documents using JAXP 13 andXMLSchema or RelaxNG

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgvalidation10 This is an example of an xbeanxml file with a namespace definition with prefixbean

ltbeansltbeans xmlnsscripting=httpservicemixapacheorgvalidation10gtgt

lt-- add validationendpoint here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-validation component defines a single endpoint type

validationendpoint Validates the incoming XML message - can be configured to failthe exchange or to send validation errors back to the sender in the message body

validationendpoint

Endpoint properties

errorHandlerFactory orgapacheservicemixvalidationhandlerMessageAwareErrorHandlerFactorySet a custom error handler to deal withvalidation errors Defaults to altcodegtCountingErrorHandlerFactoryltcodegt

handlingErrorMethod javalangString

Configure how validation errors should behandled Default value isltcodegtFAULT_JBIltcodegt ltdlgtltdtgtltcodegtFAULT_JBIltcodegtltdtgt ltddgtAjbi exception is thrown on validation errors(depending on used MEP)ltddgtltdtgtltcodegtFAULT_FLOWltcodegtltdtgtltddgtThe validation result will be sent in out fault message (depending on used MEP)ltddgtltdlgt

noNamespaceSchemaResource orgspringframeworkcoreioResource Set the validation schema to be used when nonamespace is specified

schema javaxxmlvalidationSchema Set the validation schema instance

schemaLanguage javalangStringSet the validation schema language Defaultsto ltcodegthttpwwww3org2001XMLSchemaltcodegt

schemaResource orgspringframeworkcoreioResource Set the validation schema as a SpringResource

schemaSource javaxxmltransformSource Set the validation schema as an XML Source

219 servicemix-vfs

Overview

The ServiceMix VFS component provides support for reading from and writing to virtual file systemsvia the enterprise service bus by using the Apache commons-vfs library

The namespace URI for the servicemix-bean JBI component is httpservicemixapacheorgvfs10 This is an example of an xbeanxml file with a namespace definition with prefix bean

ltbeansltbeans xmlnsvfs=httpservicemixapacheorgvfs10gtgt

lt-- add vfspoller or vfssender here --gt

ltbeansgtltbeansgt

Endpoint types

The servicemix-vfs component defines two endpoint types

vfspoller Periodically polls a directory on one of the VFS-supported file systems forfiles and sends an exchange for every file

vfssender Writes the contents of an exchange to a file on one of the VFS-supported filesystems

vfspoller

Endpoint properties

comparator javautilComparator Specifies a ltcodegtComparatorltcodegt object

component orgapacheservicemixcommonDefaultComponent the default component

concurrentExchange boolean

fileSystemManager orgapachecommonsvfsFileSystemManager sets the file system manager

path javalangString

Specifies a String object representing the path of the filefolder to be polled

Examplesbull filehomelheinpollFolderbull zipfilehomelheinpollFoldermyFilezipbull jarhttpwwwmyhostcomfilesExamplesjarbull jarlibclassesjarMETA-INFmanifestmfbull targzhttpanyhostdirmytartargzmytartarpathintar

READMEtxtbull tgzfileanyhostdirmytartgzsomepathsomefilebull gzmygzfilegzbull httpmyusernamesomehostindexhtmlbull webdavsomehost8080distbull ftpmyusernamemypasswordsomehostpubdownloads

somefiletgzbull sftpmyusernamemypasswordsomehostpubdownloads

somefiletgzbull smbsomehosthomebull tmpdirsomefiletxtbull respathinclasspathimagepngbull ramanypathtofiletxtbull mimefileyourpathmailanymailmimefilenamepdf

vfssender

Endpoint properties

Specifies a ltcodegtFileMarshalerltcodegt object that will marshal filedata into the NMR The default file marshaller can read valid XML dataltcodegtFileMarshalerltcodegt objects are implementations ofltcodegtorgapacheservicemixcomponentsutilFileMarshalerltcodegt

path javalangString

Specifies a String object representing the path of the filefolder to bepolled

Examplesbull filehomelheinpollFolderbull zipfilehomelheinpollFoldermyFilezipbull jarhttpwwwmyhostcomfilesExamplesjarbull jarlibclassesjarMETA-INFmanifestmfbull targzhttpanyhostdirmytartargzmytartarpathin

tarREADMEtxtbull tgzfileanyhostdirmytartgzsomepathsomefilebull gzmygzfilegzbull httpmyusernamesomehostindexhtmlbull webdavsomehost8080distbull ftpmyusernamemypasswordsomehostpubdownloads

somefiletgzbull sftpmyusernamemypasswordsomehostpub

downloadssomefiletgzbull smbsomehosthomebull tmpdirsomefiletxtbull respathinclasspathimagepngbull ramanypathtofiletxtbull mimefileyourpathmailanymailmimefilenamepdf

220 servicemix-wsn2005

Overview

The servicemix-wsn2005 is a standard JBI Service Engine which implements the WS-Notificationspecification from Oasis

221 servicemix-xmpp

Overview

The ServiceMix XMPP component is used to communicate with XMPP (Jabber) servers through the JBIbus

xmppreceiver

Endpoint properties

createAccount boolean

ltpgtSpecify here if you want to createan account for the user if the user iscurrently not existing on the XMPPserverltpgt

filter orgjivesoftwaresmackfilterPacketFilterltpgtHere you can define altcodegtPacketFilterltcodegt to use forfiltering XMPP packets

host javalangStringltpgtWith that method you can specifythe host name of the XMPP server ashostname or ip addressltpgt

login boolean

ltpgtHere you can specify if the usershould login to the server or not Notlogging in means that endpoint itselfwill be created but it will beinactiveltpgt

marshaler orgapacheservicemixxmppmarshalerXMPPMarshalerSupport

ltpgtWith this method you can specify amarshaler class which provides thelogic for converting an xmpp messageinto a normalized message This classhas to implement the interfaceltcodegtXMPPMarshalerSupportltcodegtor another class which implements it Ifyou dont specify a marshaler theltcodegtDefaultXMPPMarshalerltcodegtwill be usedltpgt

password javalangString ltpgtThis method sets the password forconnecting to the XMPP serverltpgt

port int

ltpgtThis method will set the portnumber for the XMPP connection Ifnothing is defined the default XMPPport number 5222 will be usedltpgt

proxyHost javalangString

ltpgtHere you can specify the hostnameor ip address of a proxy to be used toconnect to the XMPP server If you dontdefine this no proxy is usedltpgt

proxyPass javalangString

ltpgtIf your proxy needs authenticationyou can specify here the user passwordLeave this undefined if your proxy doesnot need authenticationltpgt

proxyPort javalangString

ltpgtHere you can specify the port ofthe proxy server If you do not definethis the default port (3128) will beused

proxyType javalangString

ltpgtHere you can specify the type ofproxy you have Possible values areltcodegtNONEltcodegtltcodegtHTTPltcodegtltcodegtSOCKS4ltcodegtltcodegtSOCKS5ltcodegt

proxyUser javalangString ltpgtIf your proxy needs authenticationyou can specify here the user name

Leave this undefined if your proxy doesnot need authenticationltpgt

resource javalangString

ltpgtSpecify here the resource string tosubmit to the XMPP server Usually youdefine the identifier of the XMPP clienthereltpgt

room javalangStringltpgtSpecify here an optional room tojoin If set the user will join that roomand listens to messages thereltpgt

user javalangString

ltpgtThis method if used to specify theuser name to use for connecting to theXMPP server It is not required that thisuser already exists but if not then theserver should allow registration of newusers and this user should not alreadyexist with another passwordltpgt

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

ltpgtWith this method you can specify amarshaler class which provides thelogic for converting an xmpp messageinto a normalized message This classhas to implement the interfaceltcodegtXMPPMarshalerSupportltcodegtor another class which implements it Ifyou dont specify a marshaler the

ltcodegtDefaultXMPPMarshalerltcodegtwill be usedltpgt

participant javalangString

ltpgtSpecify here an optional participantto send messages to You have todefine a room or participant in order tohave send function workingltpgt

port int

proxyUser javalangString

ltpgtIf your proxy needs authenticationyou can specify here the user nameLeave this undefined if your proxy doesnot need authenticationltpgt

user javalangString

Introduction to JBI

What is JBI
Message Exchange Patterns
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
servicemix-osworkflow
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
servicemix-scripting
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
servicemix-validation
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

1 Introduction to JBI

11 What is JBI

TODO Describe what the JBI specification is all about

12 Message Exchange Patterns

TODO Describe the four standard JBI MEPs

13 JBI API

TODO Describe the standard JBI API (MessageExchange NormalizedMessage )

2 JBI Components

21 servicemix-bean

Overview

Endpoint types

Using a Java class

ltbeansgtltbeansgt

Using a spring bean

ltbeansgtltbeansgt

Endpoint properties

Examples

Disclaimer

Annotations

Callback Method

Content Parameter

Correlation Type

Operation Method

Property Parameter

XPath Parameter

Resource Field

Destination

More Examples

bull AnnotatedBean

bull ConsumerBean

bull ListenerBean

bull PlainBean

22 servicemix-camel

Overview

ltbeansgtltbeansgt

URI format

Examples

Using jbiservice

Using jbiendpoint

Using jbiname

jbinameMyEndpoint

URI options

serialization basic

Examples

Example routes

Simple Spring route

ltbeansgtltbeansgt

Stream handling

Overview

bull SSL support

bull WS-RM support

ltbeansgtltbeansgt

Endpoint types

cxfbcconsumer

Endpoint properties

cxfbcprovider

Endpoint properties

Examples

ltbeansgtltbeansgt

Overview

Features

ltbeansgtltbeansgt

Endpoint types

cxfseendpoint

Endpoint properties

cxfbcproxy

Endpoint properties

name javalangString

Overview

ltbeansgtltbeansgt

Endpoint types

droolsendpoint

Endpoint properties

26 servicemix-eip

Overview

Endpoint types

Endpoint properties

Message Filter

Endpoint properties

Pipeline

Endpoint properties

Static Routing Slip

Endpoint properties

Wire Tap

Endpoint properties

XPath Splitter

Endpoint properties

Split Aggregator

Endpoint properties

Content Enricher

Endpoint properties

Eip Resequencer

Endpoint properties

capacity int

timeout long

Async Bridge

Correlation Id

ltbeangtltbeangt

Endpoint properties

timeout long

ExchangeTarget

NamespaceContext

Predicates

ltbeangtltbeangt

27 servicemix-exec

Overview

ltbeansgtltbeansgt

Endpoints types

Endpoint properties

PropertyName

Type Description

Abstract WSDL

How it works

28 servicemix-file

Overview

ltbeansgtltbeansgt

Endpoint types

filepoller

Endpoint properties

filesender

Endpoint properties

append boolean

overwrite boolean

29 servicemix-ftp

Overview

ltbeansgtltbeansgt

Endpoint types

ftppoller

Endpoint properties

delay long

deleteFile boolean

recursive boolean

ftpsender

Endpoint properties

overwrite boolean

Examples

ltbeansgtltbeansgt

210 servicemix-http

Overview

bull SSL support

ltbeansgtltbeansgt

Endpoint types

httpendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

timeout int

httpconsumer

Endpoint properties

httpprovider

Endpoint properties

clientSoTimeout int

gzipRequest boolean

httpsoap-consumer

Endpoint properties

httpsoap-provider

Endpoint properties

gzipRequest boolean

211 servicemix-jms

Overview

ltbeansgtltbeansgt

Endpoint types

jmsendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

jmsconsumer

Endpoint properties

cacheLevel int

jmsprovider

Endpoint properties

jmssoap-consumer

Endpoint properties

cacheLevel int

jmssoap-provider

Endpoint properties

jmsjca-consumer

Endpoint properties

synchronous boolean

212 servicemix-mail

Overview

ltbeansgtltbeansgt

Endpoint types

mailpoller

Endpoint properties

debugMode boolean

maxFetchSize int

mailsender

Endpoint properties

debugMode boolean

Overview

ltbeansgtltbeansgt

Endpoint types

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

Overview

ltbeansgtltbeansgt

Endpoint types

quartzendpoint

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

Endpoint saxonxslt

Endpoint properties

copySubject boolean

reload boolean

Optional properties

Endpoint saxonproxy

Endpoint properties

reload boolean

Optional properties

Endpoint properties

reload boolean

Optional properties

(default totrue)

Overview

bull Groovy (156)

bull JRuby (112)

ltbeansgtltbeansgt

Endpoint types

scriptingendpoint

Endpoint properties

217 servicemix-snmp

Overview

ltbeansgtltbeansgt

Endpoint types

snmppoller

Endpoint properties

vfstrap-consumer

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

validationendpoint

Endpoint properties

219 servicemix-vfs

Overview

ltbeansgtltbeansgt

Endpoint types

vfspoller

Endpoint properties

path javalangString

vfssender

Endpoint properties

path javalangString

Overview

221 servicemix-xmpp

Overview

xmppreceiver

Endpoint properties

login boolean

port int

user javalangString

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

port int

user javalangString

Introduction to JBI

What is JBI
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

2 JBI Components

21 servicemix-bean

Overview

Endpoint types

Using a Java class

ltbeansgtltbeansgt

Using a spring bean

ltbeansgtltbeansgt

Endpoint properties

Examples

Disclaimer

Annotations

Callback Method

Content Parameter

Correlation Type

Operation Method

Property Parameter

XPath Parameter

Resource Field

Destination

More Examples

bull AnnotatedBean

bull ConsumerBean

bull ListenerBean

bull PlainBean

22 servicemix-camel

Overview

ltbeansgtltbeansgt

URI format

Examples

Using jbiservice

Using jbiendpoint

Using jbiname

jbinameMyEndpoint

URI options

serialization basic

Examples

Example routes

Simple Spring route

ltbeansgtltbeansgt

Stream handling

Overview

bull SSL support

bull WS-RM support

ltbeansgtltbeansgt

Endpoint types

cxfbcconsumer

Endpoint properties

cxfbcprovider

Endpoint properties

Examples

ltbeansgtltbeansgt

Overview

Features

ltbeansgtltbeansgt

Endpoint types

cxfseendpoint

Endpoint properties

cxfbcproxy

Endpoint properties

name javalangString

Overview

ltbeansgtltbeansgt

Endpoint types

droolsendpoint

Endpoint properties

26 servicemix-eip

Overview

Endpoint types

Endpoint properties

Message Filter

Endpoint properties

Pipeline

Endpoint properties

Static Routing Slip

Endpoint properties

Wire Tap

Endpoint properties

XPath Splitter

Endpoint properties

Split Aggregator

Endpoint properties

Content Enricher

Endpoint properties

Eip Resequencer

Endpoint properties

capacity int

timeout long

Async Bridge

Correlation Id

ltbeangtltbeangt

Endpoint properties

timeout long

ExchangeTarget

NamespaceContext

Predicates

ltbeangtltbeangt

27 servicemix-exec

Overview

ltbeansgtltbeansgt

Endpoints types

Endpoint properties

PropertyName

Type Description

Abstract WSDL

How it works

28 servicemix-file

Overview

ltbeansgtltbeansgt

Endpoint types

filepoller

Endpoint properties

filesender

Endpoint properties

append boolean

overwrite boolean

29 servicemix-ftp

Overview

ltbeansgtltbeansgt

Endpoint types

ftppoller

Endpoint properties

delay long

deleteFile boolean

recursive boolean

ftpsender

Endpoint properties

overwrite boolean

Examples

ltbeansgtltbeansgt

210 servicemix-http

Overview

bull SSL support

ltbeansgtltbeansgt

Endpoint types

httpendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

timeout int

httpconsumer

Endpoint properties

httpprovider

Endpoint properties

clientSoTimeout int

gzipRequest boolean

httpsoap-consumer

Endpoint properties

httpsoap-provider

Endpoint properties

gzipRequest boolean

211 servicemix-jms

Overview

ltbeansgtltbeansgt

Endpoint types

jmsendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

jmsconsumer

Endpoint properties

cacheLevel int

jmsprovider

Endpoint properties

jmssoap-consumer

Endpoint properties

cacheLevel int

jmssoap-provider

Endpoint properties

jmsjca-consumer

Endpoint properties

synchronous boolean

212 servicemix-mail

Overview

ltbeansgtltbeansgt

Endpoint types

mailpoller

Endpoint properties

debugMode boolean

maxFetchSize int

mailsender

Endpoint properties

debugMode boolean

Overview

ltbeansgtltbeansgt

Endpoint types

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

Overview

ltbeansgtltbeansgt

Endpoint types

quartzendpoint

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

Endpoint saxonxslt

Endpoint properties

copySubject boolean

reload boolean

Optional properties

Endpoint saxonproxy

Endpoint properties

reload boolean

Optional properties

Endpoint properties

reload boolean

Optional properties

(default totrue)

Overview

bull Groovy (156)

bull JRuby (112)

ltbeansgtltbeansgt

Endpoint types

scriptingendpoint

Endpoint properties

217 servicemix-snmp

Overview

ltbeansgtltbeansgt

Endpoint types

snmppoller

Endpoint properties

vfstrap-consumer

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

validationendpoint

Endpoint properties

219 servicemix-vfs

Overview

ltbeansgtltbeansgt

Endpoint types

vfspoller

Endpoint properties

path javalangString

vfssender

Endpoint properties

path javalangString

Overview

221 servicemix-xmpp

Overview

xmppreceiver

Endpoint properties

login boolean

port int

user javalangString

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

port int

user javalangString

Introduction to JBI

What is JBI
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

ltbeansgtltbeansgt

Endpoint properties

Examples

Disclaimer

Annotations

Callback Method

Content Parameter

Correlation Type

Operation Method

Property Parameter

XPath Parameter

Resource Field

Destination

More Examples

bull AnnotatedBean

bull ConsumerBean

bull ListenerBean

bull PlainBean

22 servicemix-camel

Overview

ltbeansgtltbeansgt

URI format

Examples

Using jbiservice

Using jbiendpoint

Using jbiname

jbinameMyEndpoint

URI options

serialization basic

Examples

Example routes

Simple Spring route

ltbeansgtltbeansgt

Stream handling

Overview

bull SSL support

bull WS-RM support

ltbeansgtltbeansgt

Endpoint types

cxfbcconsumer

Endpoint properties

cxfbcprovider

Endpoint properties

Examples

ltbeansgtltbeansgt

Overview

Features

ltbeansgtltbeansgt

Endpoint types

cxfseendpoint

Endpoint properties

cxfbcproxy

Endpoint properties

name javalangString

Overview

ltbeansgtltbeansgt

Endpoint types

droolsendpoint

Endpoint properties

26 servicemix-eip

Overview

Endpoint types

Endpoint properties

Message Filter

Endpoint properties

Pipeline

Endpoint properties

Static Routing Slip

Endpoint properties

Wire Tap

Endpoint properties

XPath Splitter

Endpoint properties

Split Aggregator

Endpoint properties

Content Enricher

Endpoint properties

Eip Resequencer

Endpoint properties

capacity int

timeout long

Async Bridge

Correlation Id

ltbeangtltbeangt

Endpoint properties

timeout long

ExchangeTarget

NamespaceContext

Predicates

ltbeangtltbeangt

27 servicemix-exec

Overview

ltbeansgtltbeansgt

Endpoints types

Endpoint properties

PropertyName

Type Description

Abstract WSDL

How it works

28 servicemix-file

Overview

ltbeansgtltbeansgt

Endpoint types

filepoller

Endpoint properties

filesender

Endpoint properties

append boolean

overwrite boolean

29 servicemix-ftp

Overview

ltbeansgtltbeansgt

Endpoint types

ftppoller

Endpoint properties

delay long

deleteFile boolean

recursive boolean

ftpsender

Endpoint properties

overwrite boolean

Examples

ltbeansgtltbeansgt

210 servicemix-http

Overview

bull SSL support

ltbeansgtltbeansgt

Endpoint types

httpendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

timeout int

httpconsumer

Endpoint properties

httpprovider

Endpoint properties

clientSoTimeout int

gzipRequest boolean

httpsoap-consumer

Endpoint properties

httpsoap-provider

Endpoint properties

gzipRequest boolean

211 servicemix-jms

Overview

ltbeansgtltbeansgt

Endpoint types

jmsendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

jmsconsumer

Endpoint properties

cacheLevel int

jmsprovider

Endpoint properties

jmssoap-consumer

Endpoint properties

cacheLevel int

jmssoap-provider

Endpoint properties

jmsjca-consumer

Endpoint properties

synchronous boolean

212 servicemix-mail

Overview

ltbeansgtltbeansgt

Endpoint types

mailpoller

Endpoint properties

debugMode boolean

maxFetchSize int

mailsender

Endpoint properties

debugMode boolean

Overview

ltbeansgtltbeansgt

Endpoint types

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

Overview

ltbeansgtltbeansgt

Endpoint types

quartzendpoint

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

Endpoint saxonxslt

Endpoint properties

copySubject boolean

reload boolean

Optional properties

Endpoint saxonproxy

Endpoint properties

reload boolean

Optional properties

Endpoint properties

reload boolean

Optional properties

(default totrue)

Overview

bull Groovy (156)

bull JRuby (112)

ltbeansgtltbeansgt

Endpoint types

scriptingendpoint

Endpoint properties

217 servicemix-snmp

Overview

ltbeansgtltbeansgt

Endpoint types

snmppoller

Endpoint properties

vfstrap-consumer

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

validationendpoint

Endpoint properties

219 servicemix-vfs

Overview

ltbeansgtltbeansgt

Endpoint types

vfspoller

Endpoint properties

path javalangString

vfssender

Endpoint properties

path javalangString

Overview

221 servicemix-xmpp

Overview

xmppreceiver

Endpoint properties

login boolean

port int

user javalangString

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

port int

user javalangString

Introduction to JBI

What is JBI
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

Examples

Disclaimer

Annotations

Callback Method

Content Parameter

Correlation Type

Operation Method

Property Parameter

XPath Parameter

Resource Field

Destination

More Examples

bull AnnotatedBean

bull ConsumerBean

bull ListenerBean

bull PlainBean

22 servicemix-camel

Overview

ltbeansgtltbeansgt

URI format

Examples

Using jbiservice

Using jbiendpoint

Using jbiname

jbinameMyEndpoint

URI options

serialization basic

Examples

Example routes

Simple Spring route

ltbeansgtltbeansgt

Stream handling

Overview

bull SSL support

bull WS-RM support

ltbeansgtltbeansgt

Endpoint types

cxfbcconsumer

Endpoint properties

cxfbcprovider

Endpoint properties

Examples

ltbeansgtltbeansgt

Overview

Features

ltbeansgtltbeansgt

Endpoint types

cxfseendpoint

Endpoint properties

cxfbcproxy

Endpoint properties

name javalangString

Overview

ltbeansgtltbeansgt

Endpoint types

droolsendpoint

Endpoint properties

26 servicemix-eip

Overview

Endpoint types

Endpoint properties

Message Filter

Endpoint properties

Pipeline

Endpoint properties

Static Routing Slip

Endpoint properties

Wire Tap

Endpoint properties

XPath Splitter

Endpoint properties

Split Aggregator

Endpoint properties

Content Enricher

Endpoint properties

Eip Resequencer

Endpoint properties

capacity int

timeout long

Async Bridge

Correlation Id

ltbeangtltbeangt

Endpoint properties

timeout long

ExchangeTarget

NamespaceContext

Predicates

ltbeangtltbeangt

27 servicemix-exec

Overview

ltbeansgtltbeansgt

Endpoints types

Endpoint properties

PropertyName

Type Description

Abstract WSDL

How it works

28 servicemix-file

Overview

ltbeansgtltbeansgt

Endpoint types

filepoller

Endpoint properties

filesender

Endpoint properties

append boolean

overwrite boolean

29 servicemix-ftp

Overview

ltbeansgtltbeansgt

Endpoint types

ftppoller

Endpoint properties

delay long

deleteFile boolean

recursive boolean

ftpsender

Endpoint properties

overwrite boolean

Examples

ltbeansgtltbeansgt

210 servicemix-http

Overview

bull SSL support

ltbeansgtltbeansgt

Endpoint types

httpendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

timeout int

httpconsumer

Endpoint properties

httpprovider

Endpoint properties

clientSoTimeout int

gzipRequest boolean

httpsoap-consumer

Endpoint properties

httpsoap-provider

Endpoint properties

gzipRequest boolean

211 servicemix-jms

Overview

ltbeansgtltbeansgt

Endpoint types

jmsendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

jmsconsumer

Endpoint properties

cacheLevel int

jmsprovider

Endpoint properties

jmssoap-consumer

Endpoint properties

cacheLevel int

jmssoap-provider

Endpoint properties

jmsjca-consumer

Endpoint properties

synchronous boolean

212 servicemix-mail

Overview

ltbeansgtltbeansgt

Endpoint types

mailpoller

Endpoint properties

debugMode boolean

maxFetchSize int

mailsender

Endpoint properties

debugMode boolean

Overview

ltbeansgtltbeansgt

Endpoint types

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

Overview

ltbeansgtltbeansgt

Endpoint types

quartzendpoint

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

Endpoint saxonxslt

Endpoint properties

copySubject boolean

reload boolean

Optional properties

Endpoint saxonproxy

Endpoint properties

reload boolean

Optional properties

Endpoint properties

reload boolean

Optional properties

(default totrue)

Overview

bull Groovy (156)

bull JRuby (112)

ltbeansgtltbeansgt

Endpoint types

scriptingendpoint

Endpoint properties

217 servicemix-snmp

Overview

ltbeansgtltbeansgt

Endpoint types

snmppoller

Endpoint properties

vfstrap-consumer

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

validationendpoint

Endpoint properties

219 servicemix-vfs

Overview

ltbeansgtltbeansgt

Endpoint types

vfspoller

Endpoint properties

path javalangString

vfssender

Endpoint properties

path javalangString

Overview

221 servicemix-xmpp

Overview

xmppreceiver

Endpoint properties

login boolean

port int

user javalangString

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

port int

user javalangString

Introduction to JBI

What is JBI
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

Disclaimer

Annotations

Callback Method

Content Parameter

Correlation Type

Operation Method

Property Parameter

XPath Parameter

Resource Field

Destination

More Examples

bull AnnotatedBean

bull ConsumerBean

bull ListenerBean

bull PlainBean

22 servicemix-camel

Overview

ltbeansgtltbeansgt

URI format

Examples

Using jbiservice

Using jbiendpoint

Using jbiname

jbinameMyEndpoint

URI options

serialization basic

Examples

Example routes

Simple Spring route

ltbeansgtltbeansgt

Stream handling

Overview

bull SSL support

bull WS-RM support

ltbeansgtltbeansgt

Endpoint types

cxfbcconsumer

Endpoint properties

cxfbcprovider

Endpoint properties

Examples

ltbeansgtltbeansgt

Overview

Features

ltbeansgtltbeansgt

Endpoint types

cxfseendpoint

Endpoint properties

cxfbcproxy

Endpoint properties

name javalangString

Overview

ltbeansgtltbeansgt

Endpoint types

droolsendpoint

Endpoint properties

26 servicemix-eip

Overview

Endpoint types

Endpoint properties

Message Filter

Endpoint properties

Pipeline

Endpoint properties

Static Routing Slip

Endpoint properties

Wire Tap

Endpoint properties

XPath Splitter

Endpoint properties

Split Aggregator

Endpoint properties

Content Enricher

Endpoint properties

Eip Resequencer

Endpoint properties

capacity int

timeout long

Async Bridge

Correlation Id

ltbeangtltbeangt

Endpoint properties

timeout long

ExchangeTarget

NamespaceContext

Predicates

ltbeangtltbeangt

27 servicemix-exec

Overview

ltbeansgtltbeansgt

Endpoints types

Endpoint properties

PropertyName

Type Description

Abstract WSDL

How it works

28 servicemix-file

Overview

ltbeansgtltbeansgt

Endpoint types

filepoller

Endpoint properties

filesender

Endpoint properties

append boolean

overwrite boolean

29 servicemix-ftp

Overview

ltbeansgtltbeansgt

Endpoint types

ftppoller

Endpoint properties

delay long

deleteFile boolean

recursive boolean

ftpsender

Endpoint properties

overwrite boolean

Examples

ltbeansgtltbeansgt

210 servicemix-http

Overview

bull SSL support

ltbeansgtltbeansgt

Endpoint types

httpendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

timeout int

httpconsumer

Endpoint properties

httpprovider

Endpoint properties

clientSoTimeout int

gzipRequest boolean

httpsoap-consumer

Endpoint properties

httpsoap-provider

Endpoint properties

gzipRequest boolean

211 servicemix-jms

Overview

ltbeansgtltbeansgt

Endpoint types

jmsendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

jmsconsumer

Endpoint properties

cacheLevel int

jmsprovider

Endpoint properties

jmssoap-consumer

Endpoint properties

cacheLevel int

jmssoap-provider

Endpoint properties

jmsjca-consumer

Endpoint properties

synchronous boolean

212 servicemix-mail

Overview

ltbeansgtltbeansgt

Endpoint types

mailpoller

Endpoint properties

debugMode boolean

maxFetchSize int

mailsender

Endpoint properties

debugMode boolean

Overview

ltbeansgtltbeansgt

Endpoint types

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

Overview

ltbeansgtltbeansgt

Endpoint types

quartzendpoint

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

Endpoint saxonxslt

Endpoint properties

copySubject boolean

reload boolean

Optional properties

Endpoint saxonproxy

Endpoint properties

reload boolean

Optional properties

Endpoint properties

reload boolean

Optional properties

(default totrue)

Overview

bull Groovy (156)

bull JRuby (112)

ltbeansgtltbeansgt

Endpoint types

scriptingendpoint

Endpoint properties

217 servicemix-snmp

Overview

ltbeansgtltbeansgt

Endpoint types

snmppoller

Endpoint properties

vfstrap-consumer

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

validationendpoint

Endpoint properties

219 servicemix-vfs

Overview

ltbeansgtltbeansgt

Endpoint types

vfspoller

Endpoint properties

path javalangString

vfssender

Endpoint properties

path javalangString

Overview

221 servicemix-xmpp

Overview

xmppreceiver

Endpoint properties

login boolean

port int

user javalangString

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

port int

user javalangString

Introduction to JBI

What is JBI
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

Disclaimer

Annotations

Callback Method

Content Parameter

Correlation Type

Operation Method

Property Parameter

XPath Parameter

Resource Field

Destination

More Examples

bull AnnotatedBean

bull ConsumerBean

bull ListenerBean

bull PlainBean

22 servicemix-camel

Overview

ltbeansgtltbeansgt

URI format

Examples

Using jbiservice

Using jbiendpoint

Using jbiname

jbinameMyEndpoint

URI options

serialization basic

Examples

Example routes

Simple Spring route

ltbeansgtltbeansgt

Stream handling

Overview

bull SSL support

bull WS-RM support

ltbeansgtltbeansgt

Endpoint types

cxfbcconsumer

Endpoint properties

cxfbcprovider

Endpoint properties

Examples

ltbeansgtltbeansgt

Overview

Features

ltbeansgtltbeansgt

Endpoint types

cxfseendpoint

Endpoint properties

cxfbcproxy

Endpoint properties

name javalangString

Overview

ltbeansgtltbeansgt

Endpoint types

droolsendpoint

Endpoint properties

26 servicemix-eip

Overview

Endpoint types

Endpoint properties

Message Filter

Endpoint properties

Pipeline

Endpoint properties

Static Routing Slip

Endpoint properties

Wire Tap

Endpoint properties

XPath Splitter

Endpoint properties

Split Aggregator

Endpoint properties

Content Enricher

Endpoint properties

Eip Resequencer

Endpoint properties

capacity int

timeout long

Async Bridge

Correlation Id

ltbeangtltbeangt

Endpoint properties

timeout long

ExchangeTarget

NamespaceContext

Predicates

ltbeangtltbeangt

27 servicemix-exec

Overview

ltbeansgtltbeansgt

Endpoints types

Endpoint properties

PropertyName

Type Description

Abstract WSDL

How it works

28 servicemix-file

Overview

ltbeansgtltbeansgt

Endpoint types

filepoller

Endpoint properties

filesender

Endpoint properties

append boolean

overwrite boolean

29 servicemix-ftp

Overview

ltbeansgtltbeansgt

Endpoint types

ftppoller

Endpoint properties

delay long

deleteFile boolean

recursive boolean

ftpsender

Endpoint properties

overwrite boolean

Examples

ltbeansgtltbeansgt

210 servicemix-http

Overview

bull SSL support

ltbeansgtltbeansgt

Endpoint types

httpendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

timeout int

httpconsumer

Endpoint properties

httpprovider

Endpoint properties

clientSoTimeout int

gzipRequest boolean

httpsoap-consumer

Endpoint properties

httpsoap-provider

Endpoint properties

gzipRequest boolean

211 servicemix-jms

Overview

ltbeansgtltbeansgt

Endpoint types

jmsendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

jmsconsumer

Endpoint properties

cacheLevel int

jmsprovider

Endpoint properties

jmssoap-consumer

Endpoint properties

cacheLevel int

jmssoap-provider

Endpoint properties

jmsjca-consumer

Endpoint properties

synchronous boolean

212 servicemix-mail

Overview

ltbeansgtltbeansgt

Endpoint types

mailpoller

Endpoint properties

debugMode boolean

maxFetchSize int

mailsender

Endpoint properties

debugMode boolean

Overview

ltbeansgtltbeansgt

Endpoint types

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

Overview

ltbeansgtltbeansgt

Endpoint types

quartzendpoint

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

Endpoint saxonxslt

Endpoint properties

copySubject boolean

reload boolean

Optional properties

Endpoint saxonproxy

Endpoint properties

reload boolean

Optional properties

Endpoint properties

reload boolean

Optional properties

(default totrue)

Overview

bull Groovy (156)

bull JRuby (112)

ltbeansgtltbeansgt

Endpoint types

scriptingendpoint

Endpoint properties

217 servicemix-snmp

Overview

ltbeansgtltbeansgt

Endpoint types

snmppoller

Endpoint properties

vfstrap-consumer

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

validationendpoint

Endpoint properties

219 servicemix-vfs

Overview

ltbeansgtltbeansgt

Endpoint types

vfspoller

Endpoint properties

path javalangString

vfssender

Endpoint properties

path javalangString

Overview

221 servicemix-xmpp

Overview

xmppreceiver

Endpoint properties

login boolean

port int

user javalangString

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

port int

user javalangString

Introduction to JBI

What is JBI
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

Callback Method

Content Parameter

Correlation Type

Operation Method

Property Parameter

XPath Parameter

Resource Field

Destination

More Examples

bull AnnotatedBean

bull ConsumerBean

bull ListenerBean

bull PlainBean

22 servicemix-camel

Overview

ltbeansgtltbeansgt

URI format

Examples

Using jbiservice

Using jbiendpoint

Using jbiname

jbinameMyEndpoint

URI options

serialization basic

Examples

Example routes

Simple Spring route

ltbeansgtltbeansgt

Stream handling

Overview

bull SSL support

bull WS-RM support

ltbeansgtltbeansgt

Endpoint types

cxfbcconsumer

Endpoint properties

cxfbcprovider

Endpoint properties

Examples

ltbeansgtltbeansgt

Overview

Features

ltbeansgtltbeansgt

Endpoint types

cxfseendpoint

Endpoint properties

cxfbcproxy

Endpoint properties

name javalangString

Overview

ltbeansgtltbeansgt

Endpoint types

droolsendpoint

Endpoint properties

26 servicemix-eip

Overview

Endpoint types

Endpoint properties

Message Filter

Endpoint properties

Pipeline

Endpoint properties

Static Routing Slip

Endpoint properties

Wire Tap

Endpoint properties

XPath Splitter

Endpoint properties

Split Aggregator

Endpoint properties

Content Enricher

Endpoint properties

Eip Resequencer

Endpoint properties

capacity int

timeout long

Async Bridge

Correlation Id

ltbeangtltbeangt

Endpoint properties

timeout long

ExchangeTarget

NamespaceContext

Predicates

ltbeangtltbeangt

27 servicemix-exec

Overview

ltbeansgtltbeansgt

Endpoints types

Endpoint properties

PropertyName

Type Description

Abstract WSDL

How it works

28 servicemix-file

Overview

ltbeansgtltbeansgt

Endpoint types

filepoller

Endpoint properties

filesender

Endpoint properties

append boolean

overwrite boolean

29 servicemix-ftp

Overview

ltbeansgtltbeansgt

Endpoint types

ftppoller

Endpoint properties

delay long

deleteFile boolean

recursive boolean

ftpsender

Endpoint properties

overwrite boolean

Examples

ltbeansgtltbeansgt

210 servicemix-http

Overview

bull SSL support

ltbeansgtltbeansgt

Endpoint types

httpendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

timeout int

httpconsumer

Endpoint properties

httpprovider

Endpoint properties

clientSoTimeout int

gzipRequest boolean

httpsoap-consumer

Endpoint properties

httpsoap-provider

Endpoint properties

gzipRequest boolean

211 servicemix-jms

Overview

ltbeansgtltbeansgt

Endpoint types

jmsendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

jmsconsumer

Endpoint properties

cacheLevel int

jmsprovider

Endpoint properties

jmssoap-consumer

Endpoint properties

cacheLevel int

jmssoap-provider

Endpoint properties

jmsjca-consumer

Endpoint properties

synchronous boolean

212 servicemix-mail

Overview

ltbeansgtltbeansgt

Endpoint types

mailpoller

Endpoint properties

debugMode boolean

maxFetchSize int

mailsender

Endpoint properties

debugMode boolean

Overview

ltbeansgtltbeansgt

Endpoint types

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

Overview

ltbeansgtltbeansgt

Endpoint types

quartzendpoint

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

Endpoint saxonxslt

Endpoint properties

copySubject boolean

reload boolean

Optional properties

Endpoint saxonproxy

Endpoint properties

reload boolean

Optional properties

Endpoint properties

reload boolean

Optional properties

(default totrue)

Overview

bull Groovy (156)

bull JRuby (112)

ltbeansgtltbeansgt

Endpoint types

scriptingendpoint

Endpoint properties

217 servicemix-snmp

Overview

ltbeansgtltbeansgt

Endpoint types

snmppoller

Endpoint properties

vfstrap-consumer

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

validationendpoint

Endpoint properties

219 servicemix-vfs

Overview

ltbeansgtltbeansgt

Endpoint types

vfspoller

Endpoint properties

path javalangString

vfssender

Endpoint properties

path javalangString

Overview

221 servicemix-xmpp

Overview

xmppreceiver

Endpoint properties

login boolean

port int

user javalangString

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

port int

user javalangString

Introduction to JBI

What is JBI
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

ltbeansgtltbeansgt

URI format

Examples

Using jbiservice

Using jbiendpoint

Using jbiname

jbinameMyEndpoint

URI options

serialization basic

Examples

Example routes

Simple Spring route

ltbeansgtltbeansgt

Stream handling

Overview

bull SSL support

bull WS-RM support

ltbeansgtltbeansgt

Endpoint types

cxfbcconsumer

Endpoint properties

cxfbcprovider

Endpoint properties

Examples

ltbeansgtltbeansgt

Overview

Features

ltbeansgtltbeansgt

Endpoint types

cxfseendpoint

Endpoint properties

cxfbcproxy

Endpoint properties

name javalangString

Overview

ltbeansgtltbeansgt

Endpoint types

droolsendpoint

Endpoint properties

26 servicemix-eip

Overview

Endpoint types

Endpoint properties

Message Filter

Endpoint properties

Pipeline

Endpoint properties

Static Routing Slip

Endpoint properties

Wire Tap

Endpoint properties

XPath Splitter

Endpoint properties

Split Aggregator

Endpoint properties

Content Enricher

Endpoint properties

Eip Resequencer

Endpoint properties

capacity int

timeout long

Async Bridge

Correlation Id

ltbeangtltbeangt

Endpoint properties

timeout long

ExchangeTarget

NamespaceContext

Predicates

ltbeangtltbeangt

27 servicemix-exec

Overview

ltbeansgtltbeansgt

Endpoints types

Endpoint properties

PropertyName

Type Description

Abstract WSDL

How it works

28 servicemix-file

Overview

ltbeansgtltbeansgt

Endpoint types

filepoller

Endpoint properties

filesender

Endpoint properties

append boolean

overwrite boolean

29 servicemix-ftp

Overview

ltbeansgtltbeansgt

Endpoint types

ftppoller

Endpoint properties

delay long

deleteFile boolean

recursive boolean

ftpsender

Endpoint properties

overwrite boolean

Examples

ltbeansgtltbeansgt

210 servicemix-http

Overview

bull SSL support

ltbeansgtltbeansgt

Endpoint types

httpendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

timeout int

httpconsumer

Endpoint properties

httpprovider

Endpoint properties

clientSoTimeout int

gzipRequest boolean

httpsoap-consumer

Endpoint properties

httpsoap-provider

Endpoint properties

gzipRequest boolean

211 servicemix-jms

Overview

ltbeansgtltbeansgt

Endpoint types

jmsendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

jmsconsumer

Endpoint properties

cacheLevel int

jmsprovider

Endpoint properties

jmssoap-consumer

Endpoint properties

cacheLevel int

jmssoap-provider

Endpoint properties

jmsjca-consumer

Endpoint properties

synchronous boolean

212 servicemix-mail

Overview

ltbeansgtltbeansgt

Endpoint types

mailpoller

Endpoint properties

debugMode boolean

maxFetchSize int

mailsender

Endpoint properties

debugMode boolean

Overview

ltbeansgtltbeansgt

Endpoint types

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

Overview

ltbeansgtltbeansgt

Endpoint types

quartzendpoint

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

Endpoint saxonxslt

Endpoint properties

copySubject boolean

reload boolean

Optional properties

Endpoint saxonproxy

Endpoint properties

reload boolean

Optional properties

Endpoint properties

reload boolean

Optional properties

(default totrue)

Overview

bull Groovy (156)

bull JRuby (112)

ltbeansgtltbeansgt

Endpoint types

scriptingendpoint

Endpoint properties

217 servicemix-snmp

Overview

ltbeansgtltbeansgt

Endpoint types

snmppoller

Endpoint properties

vfstrap-consumer

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

validationendpoint

Endpoint properties

219 servicemix-vfs

Overview

ltbeansgtltbeansgt

Endpoint types

vfspoller

Endpoint properties

path javalangString

vfssender

Endpoint properties

path javalangString

Overview

221 servicemix-xmpp

Overview

xmppreceiver

Endpoint properties

login boolean

port int

user javalangString

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

port int

user javalangString

Introduction to JBI

What is JBI
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

URI format

Examples

Using jbiservice

Using jbiendpoint

Using jbiname

jbinameMyEndpoint

URI options

serialization basic

Examples

Example routes

Simple Spring route

ltbeansgtltbeansgt

Stream handling

Overview

bull SSL support

bull WS-RM support

ltbeansgtltbeansgt

Endpoint types

cxfbcconsumer

Endpoint properties

cxfbcprovider

Endpoint properties

Examples

ltbeansgtltbeansgt

Overview

Features

ltbeansgtltbeansgt

Endpoint types

cxfseendpoint

Endpoint properties

cxfbcproxy

Endpoint properties

name javalangString

Overview

ltbeansgtltbeansgt

Endpoint types

droolsendpoint

Endpoint properties

26 servicemix-eip

Overview

Endpoint types

Endpoint properties

Message Filter

Endpoint properties

Pipeline

Endpoint properties

Static Routing Slip

Endpoint properties

Wire Tap

Endpoint properties

XPath Splitter

Endpoint properties

Split Aggregator

Endpoint properties

Content Enricher

Endpoint properties

Eip Resequencer

Endpoint properties

capacity int

timeout long

Async Bridge

Correlation Id

ltbeangtltbeangt

Endpoint properties

timeout long

ExchangeTarget

NamespaceContext

Predicates

ltbeangtltbeangt

27 servicemix-exec

Overview

ltbeansgtltbeansgt

Endpoints types

Endpoint properties

PropertyName

Type Description

Abstract WSDL

How it works

28 servicemix-file

Overview

ltbeansgtltbeansgt

Endpoint types

filepoller

Endpoint properties

filesender

Endpoint properties

append boolean

overwrite boolean

29 servicemix-ftp

Overview

ltbeansgtltbeansgt

Endpoint types

ftppoller

Endpoint properties

delay long

deleteFile boolean

recursive boolean

ftpsender

Endpoint properties

overwrite boolean

Examples

ltbeansgtltbeansgt

210 servicemix-http

Overview

bull SSL support

ltbeansgtltbeansgt

Endpoint types

httpendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

timeout int

httpconsumer

Endpoint properties

httpprovider

Endpoint properties

clientSoTimeout int

gzipRequest boolean

httpsoap-consumer

Endpoint properties

httpsoap-provider

Endpoint properties

gzipRequest boolean

211 servicemix-jms

Overview

ltbeansgtltbeansgt

Endpoint types

jmsendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

jmsconsumer

Endpoint properties

cacheLevel int

jmsprovider

Endpoint properties

jmssoap-consumer

Endpoint properties

cacheLevel int

jmssoap-provider

Endpoint properties

jmsjca-consumer

Endpoint properties

synchronous boolean

212 servicemix-mail

Overview

ltbeansgtltbeansgt

Endpoint types

mailpoller

Endpoint properties

debugMode boolean

maxFetchSize int

mailsender

Endpoint properties

debugMode boolean

Overview

ltbeansgtltbeansgt

Endpoint types

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

Overview

ltbeansgtltbeansgt

Endpoint types

quartzendpoint

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

Endpoint saxonxslt

Endpoint properties

copySubject boolean

reload boolean

Optional properties

Endpoint saxonproxy

Endpoint properties

reload boolean

Optional properties

Endpoint properties

reload boolean

Optional properties

(default totrue)

Overview

bull Groovy (156)

bull JRuby (112)

ltbeansgtltbeansgt

Endpoint types

scriptingendpoint

Endpoint properties

217 servicemix-snmp

Overview

ltbeansgtltbeansgt

Endpoint types

snmppoller

Endpoint properties

vfstrap-consumer

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

validationendpoint

Endpoint properties

219 servicemix-vfs

Overview

ltbeansgtltbeansgt

Endpoint types

vfspoller

Endpoint properties

path javalangString

vfssender

Endpoint properties

path javalangString

Overview

221 servicemix-xmpp

Overview

xmppreceiver

Endpoint properties

login boolean

port int

user javalangString

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

port int

user javalangString

Introduction to JBI

What is JBI
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

Examples

Example routes

Simple Spring route

ltbeansgtltbeansgt

Stream handling

Overview

bull SSL support

bull WS-RM support

ltbeansgtltbeansgt

Endpoint types

cxfbcconsumer

Endpoint properties

cxfbcprovider

Endpoint properties

Examples

ltbeansgtltbeansgt

Overview

Features

ltbeansgtltbeansgt

Endpoint types

cxfseendpoint

Endpoint properties

cxfbcproxy

Endpoint properties

name javalangString

Overview

ltbeansgtltbeansgt

Endpoint types

droolsendpoint

Endpoint properties

26 servicemix-eip

Overview

Endpoint types

Endpoint properties

Message Filter

Endpoint properties

Pipeline

Endpoint properties

Static Routing Slip

Endpoint properties

Wire Tap

Endpoint properties

XPath Splitter

Endpoint properties

Split Aggregator

Endpoint properties

Content Enricher

Endpoint properties

Eip Resequencer

Endpoint properties

capacity int

timeout long

Async Bridge

Correlation Id

ltbeangtltbeangt

Endpoint properties

timeout long

ExchangeTarget

NamespaceContext

Predicates

ltbeangtltbeangt

27 servicemix-exec

Overview

ltbeansgtltbeansgt

Endpoints types

Endpoint properties

PropertyName

Type Description

Abstract WSDL

How it works

28 servicemix-file

Overview

ltbeansgtltbeansgt

Endpoint types

filepoller

Endpoint properties

filesender

Endpoint properties

append boolean

overwrite boolean

29 servicemix-ftp

Overview

ltbeansgtltbeansgt

Endpoint types

ftppoller

Endpoint properties

delay long

deleteFile boolean

recursive boolean

ftpsender

Endpoint properties

overwrite boolean

Examples

ltbeansgtltbeansgt

210 servicemix-http

Overview

bull SSL support

ltbeansgtltbeansgt

Endpoint types

httpendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

timeout int

httpconsumer

Endpoint properties

httpprovider

Endpoint properties

clientSoTimeout int

gzipRequest boolean

httpsoap-consumer

Endpoint properties

httpsoap-provider

Endpoint properties

gzipRequest boolean

211 servicemix-jms

Overview

ltbeansgtltbeansgt

Endpoint types

jmsendpoint

Endpoint properties

dynamic boolean

role javalangString

soap boolean

synchronous boolean

jmsconsumer

Endpoint properties

cacheLevel int

jmsprovider

Endpoint properties

jmssoap-consumer

Endpoint properties

cacheLevel int

jmssoap-provider

Endpoint properties

jmsjca-consumer

Endpoint properties

synchronous boolean

212 servicemix-mail

Overview

ltbeansgtltbeansgt

Endpoint types

mailpoller

Endpoint properties

debugMode boolean

maxFetchSize int

mailsender

Endpoint properties

debugMode boolean

Overview

ltbeansgtltbeansgt

Endpoint types

osworkflowendpoint

Endpoint properties

PropertyName

Type Description

Overview

ltbeansgtltbeansgt

Endpoint types

quartzendpoint

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

Endpoint saxonxslt

Endpoint properties

copySubject boolean

reload boolean

Optional properties

Endpoint saxonproxy

Endpoint properties

reload boolean

Optional properties

Endpoint properties

reload boolean

Optional properties

(default totrue)

Overview

bull Groovy (156)

bull JRuby (112)

ltbeansgtltbeansgt

Endpoint types

scriptingendpoint

Endpoint properties

217 servicemix-snmp

Overview

ltbeansgtltbeansgt

Endpoint types

snmppoller

Endpoint properties

vfstrap-consumer

Endpoint properties

Overview

ltbeansgtltbeansgt

Endpoint types

validationendpoint

Endpoint properties

219 servicemix-vfs

Overview

ltbeansgtltbeansgt

Endpoint types

vfspoller

Endpoint properties

path javalangString

vfssender

Endpoint properties

path javalangString

Overview

221 servicemix-xmpp

Overview

xmppreceiver

Endpoint properties

login boolean

port int

user javalangString

xmppsender

Endpoint properties

PropertyName

Type Description

login boolean

port int

user javalangString

Introduction to JBI

What is JBI
JBI API
JBI Components
servicemix-bean
Overview
Endpoint types
Using a Java class
Using a spring bean
Endpoint properties
Examples
Disclaimer
Annotations
More Examples
servicemix-camel
Overview
URI
URI format
Examples
Using jbiservice
Using jbiendpoint
Using jbiname
URI options
Examples
Example routes
Simple Spring route
Stream handling
servicemix-cxf-bc
Overview
Endpoint types
cxfbcconsumer
Endpoint properties
cxfbcprovider
Endpoint properties
Examples
servicemix-cxf-se
Overview
Endpoint types
cxfseendpoint
Endpoint properties
cxfbcproxy
Endpoint properties
servicemix-drools
Overview
Endpoint types
droolsendpoint
Endpoint properties
servicemix-eip
Overview
Endpoint types
Endpoint properties
Message Filter
Endpoint properties
Pipeline
Endpoint properties
Endpoint properties
Static Routing Slip
Endpoint properties
Wire Tap
Endpoint properties
XPath Splitter
Endpoint properties
Split Aggregator
Endpoint properties
Content Enricher
Endpoint properties
Eip Resequencer
Endpoint properties
Async Bridge
Correlation Id
Endpoint properties
Tips
ExchangeTarget
NamespaceContext
Predicates
servicemix-exec
Overview
Endpoints types
Endpoint properties
Abstract WSDL
How it works
servicemix-file
Overview
Endpoint types
filepoller
Endpoint properties
filesender
Endpoint properties
servicemix-ftp
Overview
Endpoint types
ftppoller
Endpoint properties
ftpsender
Endpoint properties
Examples
servicemix-http
Overview
Endpoint types
httpendpoint
Endpoint properties
httpconsumer
Endpoint properties
httpprovider
Endpoint properties
httpsoap-consumer
Endpoint properties
httpsoap-provider
Endpoint properties
servicemix-jms
Overview
Endpoint types
jmsendpoint
Endpoint properties
jmsconsumer
Endpoint properties
jmsprovider
Endpoint properties
jmssoap-consumer
Endpoint properties
jmssoap-provider
Endpoint properties
jmsjca-consumer
Endpoint properties
servicemix-mail
Overview
Endpoint types
mailpoller
Endpoint properties
mailsender
Endpoint properties
Overview
Endpoint types
osworkflowendpoint
Endpoint properties
servicemix-quartz
Overview
Endpoint types
quartzendpoint
Endpoint properties
servicemix-saxon
Overview
Endpoint types
Endpoint saxonxslt
Endpoint properties
Optional properties
Endpoint saxonproxy
Endpoint properties
Optional properties
Endpoint properties
Optional properties
Overview
Endpoint types
scriptingendpoint
Endpoint properties
servicemix-snmp
Overview
Endpoint types
snmppoller
Endpoint properties
vfstrap-consumer
Endpoint properties
Overview
Endpoint types
validationendpoint
Endpoint properties
servicemix-vfs
Overview
Endpoint types
vfspoller
Endpoint properties
vfssender
Endpoint properties
servicemix-wsn2005
Overview
servicemix-xmpp
Overview
xmppreceiver
Endpoint properties
xmppsender
Endpoint properties

JBI User's Guide - Welcome to Apache ServiceMix!

Documents

Open Source Used in Cisco Prime Infrastructure 2...1.32...

An Introduction to Apache ServiceMix 4 - FUSE ESB

JBI User's Guide - Apache...

Service-Oriented Integration With Apache ServiceMix

Easy Enterprise Integration Patterns with Apache Camel,...

Apache ServiceMix - anova · © 2010 – anova r&d bvba...

JBoss Fuse Overview - Austin Java Users...

ServiceMix 4.2 - Open Source ESB

Apache ServiceMix 4.2.0

Apache ServiceMix Francesco DAddio Danilo Ricci. Obiettivo.....

A MQ, S M , C CXF - Amazon S3 · WITH APACHE ACTIVEMQ,...

SOA With ServiceMix - Jfokus · • servicemix-camel -...

(Service - University of Massachusetts...

JBI User's Guide - Apache...

JBI Inleiding Natuurkunde

Introduction to Jboss Fuse - Red...