Introduction to DSP - msvincognito.nl · Introduction to DSP . Source: . Free textbook on DSP . 1 Version 2
Post on 16-Oct-2020
29 Views
Preview:
Transcript
Introduction to DSP
Source: http://www.dspguide.com Free textbook on DSP
1 Version 2
Digital Signal Processing
• Key aspect is signals • Signals acquired from the environment
through sensors • Digitized through ADCs • DSP answers “what next”?
2
DSP Roots
3
DSP overlaps with many fields…
4
Signals and Systems
• Signal – Description of how one parameter varies with another parameter – Voltage vs. time – Brightness vs. distance
• System – Any process that produces output signal in response to an input signal
5
Continuous and Discrete systems
6
Understanding a System
• We need to understand a system i.e., how it transforms the input signal to generate an output signal
• Examples: – How to remove noise from an ECG – How does telephone line transmit your voice
signal and changes along the way… • Too many systems with varied characteristics
– Is it really possible?
7
Linear System
• Fortunately, many useful systems are linear in nature
• They possess properties that make them amenable to be abstracted and studied
• What properties make a system linear?
8
Linear System
• A linear system satisfies two mathematical properties: – Homogeneity – Additivity
• If we show that a system exhibits the above two properties, then we prove that the system is linear
• A third property known as shift invariance is not required for linear system but usually satisfied
• It is mandatory of linear systems for DSP
9
Homogeneity
10
Additivity
11
Shift Invariance
12
Additional Properties
• Unfortunately, the three properties of linear systems, namely, homogeneity, additivity, and shift invariance are not enough to understand/study linear systems
• Two additional properties usually displayed by linear systems – Static linearity – Sinusoidal fidelity
13
Static Linearity • defines how a linear system reacts when the signals aren't changing, i.e.,
when they are DC or static. • static response of a linear system is very simple: the output is the input
multiplied by a constant. • All linear systems have static linearity, the opposite is not always true
14
Examples of Static nonlinearity
15
Sinusoidal Fidelity
• Important characteristic exhibited by linear systems
• If the input to a linear system is a sinusoidal wave, the output will also be a sinusoidal wave, and at exactly the same frequency as the input.
• However, the output may differ in amplitude and phase
16
Examples of Linear Systems
17
Examples of Non-linear systems
18
Special Properties of Linearity
• Linearity is commutative
19
Special Properties of Linearity
• A system with multiple inputs and/or outputs will be linear if it is composed of linear subsystems and additions of signals. The complexity does not matter, only that nothing nonlinear is allowed inside of the system.
20
Multiply Operation
• With a constant is linear… • Multiplication of two signals is non-linear
21
Synthesis & Decomposition
22
Superposition – Foundation
of DSP
23
Common Decompositions
• Using Impulses Impulse=single non zero
value in a sequence of zeroes
δ[n] δ[n-s]
• Using Step signals
24
0 s
25
Fourier Decomposition
• Not very obvious • N-point signal decomposed to N+2 signals • Half are sine waves • Half are cosine waves
26
Fourier Decomposition
27
Convolution
• Convolution is a mathematical way of combining two signals to form a third signal
• The most important concept in DSP • Input and impulse response are combined to
compute the output signal
28
Impulse Response of a Linear System
29
Computing output signal
Question: If a linear system has an impulse response of h[n] then compute the output for -3*δ[n-8]
Answer: If δ[n] gives output h[n] then δ[n-8] gives output h[n-8] … shift invariant
and -3* δ[n-8] gives output 3*h[n-8] … homogeneity
30
Computing Output Response
Given an input signal, we can compute the output of a linear system if we know its impulse response
Step 1: Decompose signal into sum of scaled and shifted impulses
Step 2: Compute output for each scaled and shifted impulse input
Step 3: Add all the output signals
31
Convolution
• Is another mathematical operation just like add, subtract, multiply
• Represented by * (asterisk) • y[n] = x[n] * h[n] • “x[n] is convolved with h[n] to produce y[n]”
32
Filtering Example
33
Input = Sine wave
(High Frequency) +
Ramp (Low Frequency)
More Examples
34
Input and Output Lengths • Output Length = Input Length + Impulse Length – 1
• Usually Impulse length is very short (~100) • While input can be very large (~millions of samples)
35
= 81 + 31 – 1 = 111
= 81 + 31 – 1 = 111
Understanding Convolution
• We can understand from the perspective of – Input Signal (Input side algorithm) – Output Signal (Output side algorithm)
36
Input Side Algorithm
• This first viewpoint of convolution is based on the fundamental concept of DSP – decompose the input, – pass the components through the system, – and synthesize the output.
37
Input Side Algorithm – An illustrative example
38
39
Same example – input and impulse response swapped
40
We observe that we get the
same output
Convolution Is commutative
Output Side Algorithm
• Input side perspective answers the following question – How does each input sample contribute to the
output? – This approach is not a natural way of computing
output • Output side perspective tries to answer the
following question – For each output sample, what input samples
contribute to its generation? – This approach is more natural
41
Example revisited
42
Which inputs contribute to output y[6]? To answer this, we can look at sample 6 in each plot We see that X[3], x[4], x[5], and x[6] contribute to y[6] i.e., y[6]=x[3]h[3] + x[4]h[2] + x[5]h[1] + x[6]h[0]
Example revisited
• y[6] = x[3]h[3] + x[4]h[2] + x[5]h[1] + x[6]h[0] • Note that samples of h in the above equation
are in decreasing order • While input samples are in an increasing order • From the output perspective, thus, the
impulse response is “flipped”
43
44
45
Samples Not Available!!
46
Samples Not Available!!
Convolution – Mathematical Formula
47
End effects of convolution
48
Convolution - Applications
• A linear system's characteristics are completely specified by the system's impulse response, as governed by the mathematics of convolution
• The above is the basis for many signal processing techniques
• Examples – Filters – systems with appropriate impulse response – Enemy aircraft detected by radar by analyzing measured
impulse response – Echo suppression in long distance phone calls
• Create impulse response that counteracts impulse response of echo
49
50
Example Low Pass Filter Kernels
• Kernel another word for Impulse Response
51
High Pass Filter Kernels
52
top related