Intelligent Flow Technology. Adjusting Distance While Simultaneously Adjusting Flow Rate Intelligent Flow Technology.
Post on 13-Dec-2015
225 Views
Preview:
Transcript
The traditional approach is to use the Break-up Screw to reduce the Radius
for Head to Head Coverage
While using the Break-up Screw does reduce Radius it does not reduce Flow
causing overwatering to the reduced area
The Screw also disrupts Nozzle Spray Uniformity causing uneven watering
RPS75i Intelligent Flow Technology
*
The Solution
K-Rain’s Patented Intelligent Flow TechnologyAllows You To Reduce Both
Distance And Flow Rate
RPS75i Intelligent Flow Technology
At the Same Time
*
Total Design Flexibility
Infinitely Adjustable Through All Radius and Flow Rates
Proportionately and Simultaneously
RPS75i Intelligent Flow Technology
Typical Design using Break-up Screw60’ X 60’ @40PSI
#1.5 Nozzle 38’#3 Nozzle 38’#6 Nozzle 43’Total Flow = 20.1 GPM
#1.5
#3 #6
*
(23% water savings)
Typical Design using 60’ X 60’ @ 40PSI
#1.5
#3 #6
#1.5 Nozzle 38’#3 Nozzle 38’#6 Nozzle 43’Total Flow = 20.1 GPM
#1.5 Nozzle 30’#3 Nozzle 30’#6 Nozzle 30’Total Flow = 15.4 GPM
*
Intelligent Flow Technology?
• Reduces both spray distance & water flow unlike the “Break-up Screw” which only reduces distance.
• It does so both simultaneously & proportionately.
• Zero disruption of nozzle discharge.
• Limitless reduction within nozzle performance range.
Critical placement at the nozzle Maintains water velocity and pressure which ensures nozzle performance while maintaining a uniform discharge pattern
Nozzle
• Zero education or buy-in because adjustment is done exactly the same as the break-up screw
• Helps maintain match precipitation
• Prevents added run times (SC) used to compensate for poor nozzle spray uniformity associated with the break-up screw
*
top related