Industry Orientation Presented by Saskatchewan Ministry of ......•ECON will continue working with stakeholders to improve and enhance these programs •ECON intends to participate

Post on 22-Sep-2020

0 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

Transcript

Industry Orientation Presented by Saskatchewan

Ministry of the Economy

Oil and Gas Measurement and Reporting and Enhanced Production Audit Program (EPAP)

February 10, 2016

Introduction

Bruce Lerner

Director

Petroleum Data Management and Compliance

Agenda

• Introduction • Directive PNG017: Measurement Requirements for Oil

and Gas Operations Overview • Directive PNG076: Enhanced Production Audit Program

(EPAP) Overview • Break • Guideline PNG028: Implementing and Operating the

Enhanced Production Audit Program (EPAP) Overview • Petrinex EPAP Comparison (SK vs AB) • Question Period • Overview of Petrinex EPAP Functionality

3

Regulatory Priorities

• Renew outdated regulatory requirements

• Address compliance issues respecting measurement and reporting

• Reduce health and safety concerns

• Enhance accuracy of reported volumetric data

• Better understand the state of compliance

• Increase the level of compliance assurance

• Harmonize programs between provinces

4

Benefits for Industry

• Harmonized requirements between jurisdictions

• Increased public confidence

• Higher quality volumetric data

• More accurate volumetric allocations

• Reduced operating costs

• Improved health and safety respecting field operations

5

Benefits For ECON

• Appropriate level of assurance respecting compliance

• Continuous improvement with respect to compliance

• Improved volumetric business processes and controls

• Higher accuracy and completeness of volumetric data

• Improved audit efficiency

• Assurance that Saskatchewan oil and gas resources are well managed

• Improved assurance with respect to health and safety concerns related to air quality

6

Regulatory Documents

• Directive PNG017

– Harmonized with Alberta’s Directive 017

• Directive PNG076

– Harmonized with Alberta’s Directive 076

• Guideline PNG028

– Similar to Alberta’s EPAP Operator’s Handbook

• Latest drafts are available on ECON’s website

7

Responding to Questions

8

Directive PNG017 Measurement Requirements for

Oil and Gas Operations Overview

Steve Rymes

Manager, Facility Data

Petroleum Data Management and Compliance

Outline

• Structure of Directive PNG017

• New Requirements for Saskatchewan

• Major Differences between SK and AB

• Implementation of New Requirements

• Available Information and Resources

• Summary

10

Structure of Directive PNG017

• Comprehensive and detailed document

• Provides clear direction to industry and the regulator

• Includes:

– Fundamental principles

– Base requirements

– Recommended procedures

– Reporting requirements

11

Directive PNG017 - Table of Contents

1. Standards of Accuracy

2. Calibration and Proving

3. Proration Factors, Allocation Factors and Metering Difference

4. Gas Measurement

5. Site-specific Deviation from Base Requirements

6. Non-Heavy Oil Measurement

7. Gas Proration Batteries

8. Gas and Liquid Sampling and Analysis

12

Directive PNG017 - Table of Contents

9. Cross-Border Measurement

10.Trucked Liquid Measurement

11.Acid Gas and Sulphur Measurement

12.Heavy Oil Measurement

13.Condensate and High Vapour Pressure Liquid Measurement and Reporting

14.Liquid Measurement

15.Water Measurement

13

Ch-ch-ch-changes

New Requirements for Saskatchewan

• Replaces provisions in The Oil and Gas Conservation Regulations, 2012 and authorizations under the Act

• Petrinex functionality has been expanded:

– Adopted proration battery subtypes

– Crude Oil Type based on actual density

– Criteria for paper battery facility subtype

15

New Requirements for Saskatchewan

• Sampling and analysis

– Explicit requirements throughout document

• Measurement points identified

– Delivery point measurement

– Metered vs estimated measurement

• Measurement schematics

16

17

Major Differences Between SK and AB

• Differences between Saskatchewan and Alberta requirements are highlighted in Directive PNG017

• Examples: – Saskatchewan has facility subtypes specific to

Heavy Oil • 313 - Heavy Crude Oil Paper Battery

• 325 - Heavy Crude Oil Single-Well Battery

• 326 - Heavy Crude Oil Multiwell Group Battery

• 327 - Heavy Crude Oil Multiwell Proration Battery

18

Major Differences Between SK and AB

– Condensate produced and separated at a gas well in Saskatchewan:

• If recombined with gas, reported as GAS Production

• If delivered in liquid form, reported as COND Production

– Royalty Triggers:

• SK does not charge royalties on natural gas liquids

• SK Gas royalties payable at the wellhead

– Sulphur measurement requirements in section 11 do not apply in Saskatchewan

19

Under Pressure?

20

Implementation of New Requirements

• Directive PNG017 comes into force effective April 1, 2016

• All existing measurement exemptions will be rescinded

• An exemption may not be necessary under the new requirements

• If an exemption is required, an operator must receive approval from ECON through the Integrated Resource Information System (IRIS)

21

Implementation of New Requirements

• Facilities that currently exist: – Must be fully compliant with current

measurement requirements

– Necessary improvements to meet Directive PNG017 requirements can be phased in over a four-year period.

– Operators expected to make significant progress each year

– ECON will not prescribe how the annual percentage is determined or measured

22

Implementation of New Requirements

– Not mandatory for operators to submit supporting documentation regarding the progress they have made each year

– All operators must fully implement Directive PNG017 requirements by March 31, 2020

• Facilities licensed after April 1, 2016

– Must be constructed and operated in compliance with Directive PNG017 requirements

23

Available Information and Resources

• Ministry of the Economy Website

– http://economy.gov.sk.ca/Directive-PNG017

– Directive PNG017

• Official version will be posted prior to April 1, 2016

– FAQs about Directive PNG017

• Answers to some common questions

– Compliance Reporting Tool

• Spreadsheet to measure an operator’s implementation progress during the four-year phase-in period

24

http://economy.gov.sk.ca/Directive-PNG017

25

Available Information and Resources

• ECON Measurement Committee – e-mail directive17.econ@gov.sk.ca

• Petroleum and Natural Gas (PNG) Support Desk – e-mail png.support@gov.sk.ca

• Measurement Exemption – http://www.saskatchewan.ca/business/agriculture-

natural-resources-and-industry/oil-and-gas/oil-and-gas-licensing-operations-and-requirements/oil-and-gas-drilling-and-operations/exemption-from-measurement

26

Summary

• More accurate measurement and reporting benefits Industry and the Regulator

• Directive PNG017 will remain current and harmonized through continuous improvement

• Operators must understand the new requirements and plan the necessary improvements to achieve compliance

27

Directive PNG076 Enhanced Production Audit Program

Overview

Blake Linke

Manager, Compliance Programs

Petroleum Data Management and Compliance

Outline

• Background

• EPAP Goals

• Major EPAP Components

• Important Dates

29

Background - EPAP Philosophy

“Trust but verify” - Ronald Reagan

Trust => Declaration

Verify => Compliance Assessment

30

Background

• In the recent past: – ECON demonstrated compliance to Industry by:

• Site inspections

• Review industry measurement documents

• Exceptional basis

• EPAP approach: – Industry demonstrates compliance to ECON by:

• Annual declaration by executive

• Reporting evaluation of controls work

• Remediation of deficiencies

31

Background

• In the recent past:

• Reactive

• Involved few facilities & operators

• EPAP approach:

• Proactive

• Involves all facilities (~20,800) and all operators (~380)

32

EPAP Goals

• Shift how operators demonstrate Measurement & Reporting compliance (Directive PNG017)

• Raise level of compliance assurance over Directive PNG017

• Encourage continuously improving compliance

33

Major EPAP Components

• Controls & Evaluation of Controls

• Declaration

• Compliance Assessment

• Workflows

• Escalation

34

Controls & Evaluation of Controls

• Every business has controls

• EPAP requires operators to evaluate controls

• Proactive instead of reactive

• Controls must cover all measurement and reporting requirements

35

Controls & Evaluation of Controls

36

Declaration

• Results of evaluation of controls reported by theme

• Contains assertions about the state of compliance

• Requires signature of senior executive(s)

• Executed via Petrinex

37

Declaration - Reporting Themes

1. Measurement System Design and Installation

2. Measurement Device Maintenance (Calibration etc.)

3. Measurement Device Operation

4. Sampling and Analysis

5. Proration testing – Oil/Heavy Oil/In-situ/Sulphur Reporting

6. Proration testing – Gas Well

7. EFM records

38

Declaration - Reporting Themes

8. Field records

9. Trucked Production

10.Fuel/Flare/Vent

11.Schematic

12.Facility Master Data Set Up

13.Calculation Factors

14.Monthly Volumetric Activity Reporting

39

Declaration

40

Declaration Timeline

1 11 10 9 8 7 6 5 4 3 2 14 13 12

Declaration Period - 12 months

Submission Period

Declaration Month

Submission Deadline

41

Declaration Considerations

• Data Entry Completeness

• Number of Evaluations of Controls

• Reasonable sample size to conduct evaluation of controls

– Inclusion of more facility subtypes is preferable

• Evaluations determine effectiveness of controls

42

Compliance Assessment

• There are 53 CAIs… Examples:

– Low Solution Gas Conservation Efficiency

– Excessive Flaring

– Low Gas/Oil Ratio

– Invalid Water Metering Difference

– Questionable use of Destination Codes

– Excessive Gas Proration Factor

43

Compliance Assessment

• Monthly CAI Report

• Runs algorithms and displays results for CAIs

• CAI being triggered is not necessarily a noncompliance

• ECON can initiate a Workflow directing operators to address CAIs

44

Workflows

• Carried out through EPAP functionality on Petrinex:

– Communicates between ECON & Operator

– Documents discussion and actions

– Provides basis for follow-up

– Request more information re: controls & evaluation information

– Also used for Voluntary Self Disclosures (VSDs)

45

Escalation

• Notice of noncompliance

• Financial penalties up to $250,000

• Facility suspensions

• Cease applications

46

Important Dates

• Effective date: April 1, 2016

• Trial declaration period from April 1, 2016 to November 30, 2016

• Your Declaration month has been emailed to your EPAP Change Leader from PNG Support as of today (Wednesday, February 10, 2016) to operators that identified EPAP change leaders.

47

More Information Email

• PNG.Support@gov.sk.ca

www.economy.gov.sk.ca/EPAP

48

Guideline PNG028 Initiating and Operating the

Enhanced Production Audit Program (EPAP) Overview

Yogi Schulz

Partner

Corvelle Consulting

Yogi Schulz Biography

• Partner in Corvelle Consulting

• Information technology consulting

• EPAP implementation and operation

• Relevant development work:

– Led EPAP at AER

– Led PSAP at AER

– Led measurement at ECON

– Leading EPAP at ECON

50

Outline

• Major EPAP Operation Processes

• Suggested initiation tasks

• Suggested initiation schedule

• Discussion

51

Major EPAP Operation Processes

Design Choices for Operating EPAP

• Measurement and Reporting Controls

• Procedure to Evaluate Controls

• Evaluation of Controls

• Remediation Effort

• CAI Investigation and Remediation Effort

• Regulator-initiated Workflows

• Roles and Responsibilities for EPAP Operation

53

Annual EPAP Declaration

• Confirm the Design

• Create List of Possible Facilities for Evaluation

• Conduct Evaluations of Controls at Sample Facilities

• Consolidate Conclusions of Evaluations of Controls

• Complete EPAP Declaration in Petrinex

• Present EPAP Declaration to Senior Executives

• Submit EPAP Declaration in Petrinex

• Respond to Regulator Queries about EPAP Declaration

• Receive Regulator Approval of EPAP Declaration

54

“We’re going to parachute in and conduct a surprise evaluation of controls,

but I want to keep the whole event low key.”

Ongoing Remediation Arising from Evaluations of Controls

• Scope/Plan Remediation Projects

• Execute Remediation Projects

• Present Remediation Results to Senior Executives

• Respond to Regulator Queries about Remediation

56

Monthly CAI Report

• Download CAI Report from Petrinex

• Filter CAI Items

• Prioritize CAI Items

• Investigate CAI Items

• Remediate CAI Items

• Present CAI Progress Report

• Respond to Regulator-initiated CAI Workflow Items

57

Ongoing Regulator-initiated Workflows

• Receive Regulator-initiated Workflow Item

• Investigate Regulator-initiated Workflow Item

• Respond to Regulator-initiated Workflow Item

• Remediate Noncompliance

• Receive Regulator Approval of Workflow Item

58

Suggested Initiation Tasks

EPAP Initiation Project Tasks

• Assign project manager and project resources

• Conduct an initial EPAP assessment

• Brief managers and senior executives

• Build awareness of operator staff

• Develop project plan

• Execute project plan

• Estimate of annual EPAP operation effort

60

Acceptable Practices

• PNG028 describes examples of acceptable practice that achieves EPAP compliance

• PNG076 provides significant latitude for operator professional judgment

• Operators may adopt other acceptable practices in the operation of EPAP

61

Suggested Initiation Schedule

EPAP Initiation Schedule

Event Name Dates

Directive PNG076 EPAP Effective April 1, 2016

Trial Declaration April 1, 2016 to November 30, 2016 Suggested period for initiation project

63

EPAP Declaration Timeline

1

Declaration Period - 12 months

Submission Period

Declaration Month

Submission Deadline

2 3 4 5 6 7 8 9 10

11

12

13

14

Declaration Period 12 months

……. 1 2 3 4

64

Question Period

Stakeholder Engagement

• Stakeholders were consulted during program development

• ECON will continue working with stakeholders to improve and enhance these programs

• ECON intends to participate in the Alberta EPAP stakeholder committee as well as the CAI subcommittee

• ECON will work with AER and Industry to refine CAIs and make them more effective.

66

Thank you for your participation

top related