IDCS 100 Cabinet construction based on existing Compact 2 3 Expansion slots in main cabinet 2 types of types of expansion cabinet –Expn A –Expn B.

iDCS 100

• Cabinet construction based on existing Compact 2

• 3 Expansion slots in main cabinet

• 2 types of types of expansion cabinet– Expn A– Expn B

System Structure

PSU

Ringer

2SLIMEM

MISCUniversal Slots

Universal Slots DCS

slot

6 Universal slots 6 x 8 ch slots

1 slot for TEPRI or SVMi-8

32 ch slot

Main Cabinet Expansion Cabinet

Basic Cabinet

PSU

Ringer

2SLIMEM

MISCSlots for

expansion cards

Expanded memory size from 2MB to 3MB

Support both existing cardsand new cards

(Backward Compatibility)

Power Supply Unit

PSU

110V/220V Free Voltage

Accommodate up to 48 KTS 40 KTS when using the SVMi-8

Expansion Cabinet A

Slots for CII &

iDCS100 cards

Highway channel relocation First 3 Slots support 8 port

cards Last Slot(4th) supports 32 port

cards – PRI, TEPRI or SVMi-8

Support both existing cardsand new cards

(Backward Compatibility)

Slot for

DCS card

Expansion Cabinet B

Slots for CII &

iDCS100 cards

Highway channel relocation First 2 Slots support 8 port

cardsSlot 3 for SVMi-8

Last Slot(4th) supports 32 portcards – PRI or TEPRI

Support both existing cardsand new cards

(Backward Compatibility)

Slot for

DCS card

Memory Cards

MEM 4Flash memoryw/ LAN

MEM 33MB EPROM

YES YES YES YES YES 19.2K 19.2K YES

YES YES YES NO NO NO 9.6K NO

VoIP TEPRI Q-SIG LANSIOLAN

SIOMISC

S/WUpload

WindowsPCMMC

Memory Card - Two Options:

MEM 3 (EPROM) - 3MB

MEM 4 (flash memory) - 8 MB plus LAN and SIO interface

TEPRI Card

TEPRI

Same card with iDCS 500

TEPRI card required for networking features (Q-SIG) Plus MEM4

TEPRI card must be placed on the last (4th) slot

Available to use existing PRI

ITM3

VoIP Board

iDCS 100Sized Card

New ITM3 card for iDCS 100 H.323 V3 8 Channels maximum

Minimize

System Capacities

• Total Capacity - approximately 100 ports• Extensions Digital - 48 max• Analogue - 48 max• OPX – 2• PSTN trunks – 36• BRI - 24 channels• PRI - 30 channels• VoIP - 8 channels

System Capacities

• Auto Attendant - 4 channels– 12 levels– ACD group comfort messages

• I/O ports– 2 serial on MISC card– LAN 10/100 base T plus extra I/O port- MEM 4 Card

required– Internal Modem for remote system access

• Voicemail– SVMi-4 (Flash memory) - 4 ports– SVMi-8 (HDD) - 8 ports

• takes up last slot in Expansion cabinet

System Capacities

• DECT– 3 Base Stations– 24 Handsets

• Miscellaneous– MOH

• 1 internal, 2 External, Voicemail

– Internal Paging - 4 groups– External Paging - 4 groups– Common Bell – Alarm Contact

Motherboard

• 8 Digital keyphone Interfaces [2B + D]• 1 External MOH port• 1 Internal MOH source• 1 Paging Port• 3 Universal Slots• Provision for PLL board• Provision for Ringer Module

Interface Cards

• 2 SLI• Memory Board• Misc. 1 Card• Misc. 2 Card• Modem Card• PLL

Interface Cards

• 3 TRK - loop start + 2 PFT• 6 TRK - loop start + 2 PFT• 8 DLI [1B + D]• 8 SLI• AA Card

Interface Cards

• PRI• TEPRI• 2 BRI• 4 BRI• ITM3• AC 15

Misc. 1 card

• Additional 4 DTMF receiver/senders• 2 x RS232 ports (3 ports with MEM4)• Additional BGM port• Additional Page port• 3 Common purpose relays• provision for modem card

Misc. 2 card

• As per the Miscellaneous 1• Plus a 4 port AA

Keyphone Daughter Boards

• KDB-DLI for extra keyphone• KDB-SLI for extra SLI• Can only be fitted to keyphone on

Motherboard• Don’t install with keyphone “live”

iDCS 100Installation

• P1 for connections on motherboard

iDCS 100Installation

• P2 for connections on the 3 expansion slots

iDCS 100Installation

• Ringer Unit required for any SLI extensions

iDCS 100Installation

• PLL card required for any ISDN card

iDCS 100Installation

• 2 cct SLI card

iDCS 100Installation

• MISC slot for either MISC 1 or 2

iDCS 100Installation

• MEM slot for either MEM3 or MEM4

iDCS 100Installation

• 3 expansion slots for DLI card, SLI card, BRI card etc

iDCS 100Installation

• Connection leads to main cab

iDCS 100Installation

• Earth lead

iDCS 100Installation

• Illustration of connected expn cabinet

• DON’T FORGET THE SCREWS

iDCS 100Installation

• P5 for connections on 3 expansion cards

Doorphone Interface Module

• DPIM can be fitted to all systems

• Connects to DLI port

24 Button Display Keyphone

12 Button Display Keyphone

6 Button Display Keyphone

6 Button Basic Keyphone

DS 2100B

48 Button AOM

The End