HSS SERIES · and stainless steel EC 3000 - The allround HSS solution matErials: paramEtErs: All structural steel , non-alloy tool steel and stainless steel thin walled tubes. Tensile
Post on 25-Aug-2020
2 Views
Preview:
Transcript
HSS SERIESCutting tubes and solids on manualand (semi-)automatic sawing machines
For more information:
www.kinkelder.com
typical application ExamplEs
Material Blade life(cuts)
Dimensions (mm)
Cutting speed(m/min)
Cutting time(s)
Blade type Blade life(m2)
The steam treated Alpha saw blade has a blue Oxide surface layer for a longer blade life compared to the uncoated saw blade. It is mainly being used for cutting steel on manual and semi-automatic sawing machines.
matErials:
paramEtErs:
machinEs:
All materials like tubes, profiles and solids. All structural steels and non-alloy tool steel with a tensile strength up to 700 N / mm2.
Suggested cutting speed: 30 - 60 m/min.
Manual, semi-automatic
Due to the higher oxidation temperature, this TiN coated Solar saw blade is able to cut materials with high tensile strengths.
matErials:
paramEtErs:
machinEs:
All materials like tubes, profiles and solids with a tensile strength up to 750 N / mm2
Suggested cutting speed: 80 - 140 m/min. Feed: 0,04 - 0,09 mm/tooth.
Manual, semi-automatic, automatic
Alpha
Alpha
Solar
Solar
Tube
Tube
Tube, S275
Tube, S275
25 x 1,5
32 x 2,0
33,9 x 2,0
45 x 2,5
38
38
150
150
4,0
4,2
1,5
2,0
2,0
2,5
2,2
2,0
18,000
14,000
11,000
6,000
typical application ExamplEs hss Ec 3000
Material Blade life(m2)
Dimensions (mm)
Cutting speed(m/min)
Cutting time(s)
Tube, S235
Tube, S235
Tube, S235
Tube, S275
18 x 1,6
25 x 2,0
40 x 4,0
60 x 2,6
180
140
70
120
0,4
0,9
3,96
2,7
3,0
3,6
2,2
2,6
Blade life(cuts)
35.000
25.000
5.000
5.000
Due to a sophisticated PVD coating for wear protection which achieves a very low friction coefficient, the EC 3000 saw blade is a cost efficient solution for cutting structural and non-alloy tool steel thin walled tubes.
When cutting tubes and profiles on manual and semi-automatic sawing machines, EC 3000 allows a higher cutting speed than a steam treated saw blade. It can even be used for cutting thin walled tubes on automatic machines.
EC 3000 is also very suitable for cutting stainless steel tubes and profiles.
Advantages compared with steam treated• Higher blade life • Little or no side pick-up• Increased uptime • Higher production output• Lower cost per cut • Ideal for cutting both structural- and stainless steel
EC 3000 - The allround HSS solution
matErials:
paramEtErs:
All structural steel , non-alloy tool steel and stainless steel thin walled tubes. Tensile strength up to 600 N / mm2.
machinEs: Automatic
Steel 60 - 120 m/min Austenitic stainless steel 30 - 50 m/min ≈ 1 m2
(300 series)Ferritic w/o Ti (409 & 412) 220 - 260 m/min ≈ /< 1 m2 Ferritic with Ti (441) 60 - 120 m/min
suggested cutting speed Blade life
www.kinkelder.com V 16.01 - HSS Standard Series
Kinkelder BVCorporate Headquarters
nijverheidsstraat 2(industrial area Zuidspoor)nl-6905 Dl Zevenaarp.o. Box 242nl-6900 aE Zevenaarthe netherlands
t: +31 (0)316 58 22 00F: +31 (0)316 58 22 17info@kinkelder.nlwww.kinkelder.com
Alabama Cutting Technologiespell city (al), Usat: +1 (205) 884 49 71info@alcuttingtech.comwww.alcuttingtech.com
Kinkelder Francemessein, Francet: +33 (383) 539713info@kinkelder.frwww.kinkelder.com/fr
Kinkelder Cutting Technology Co., Ltd.suzhou city, chinat: +86 (0)512 693 68 780info@kinkelder.com.cnwww.kinkelder.com/cn
Grasche GmbHremscheid, Germanyt: +49 (0) 2191-5615-0info@grasche.dewww.grasche.de
Kinkelder CuttingSolutions Inc.louisville (Ky), Usat: +1 (502) 329 8244cridge@kinkelderusa.comwww.kinkelder.com/en
AMV Service le chambon Feugerolles Francet: +33 (477) 405229info@amvservice.comwww.amvservice.com
KTS Sägetechnik GmbHZülpich, Germanyt: +49 (2252) 835178-0info@kts-saegetechnik.dewww.kts-saegetechnik.de
Saws InternationalUSA Headquartersmachesney park (il), Usat: +1 (815) 965 6900info@sawsinternational.comwww.sawsinternational.com
Kinkelder Belgium N.V./S.A.sint-pieters-leeuw, Belgiumt: +32 (0)2 465 64 42info@kinkelder.bewww.kinkelder.be
KR Sawscoventry, United Kingdomt: +44 (0)24 7661 0907sales@krsaws.co.ukwww.krsaws.co.uk
Kinkelder France SAorchies, Francet: +33 (320) 71 02 12sales@kinkelder.frwww.kinkelder.com/fr
Kinkelder Saw Inc. canton (mi), Usat: +1 (734) 453 1199info@kinksaw.comwww.kinkelder.com/en
Sepio spol s.r.o.Zborovice, czech republict: +420 (0)57 366 91 35sepio@sepio.czwww.sepio.cz
top related