HP ConvergedSystem 250-HC StoreVirtual System · PDF fileHewlett-Packard Company and is offered in confidence, ... •Creation of a management group through the preinstalled HP OneView

HP ConvergedSystem 250-HC StoreVirtual SystemInstallation and Startup Service

August 2015

Confidential Disclosure AgreementHP does not warrant or represent that it will introduce any

product to which the information relates

The information contained herein is subject to change

without notice. HP makes no warranties regarding the

accuracy of this information.

The only warranties for HP products and services are set

forth in the express warranty statements accompanying

such products and services

Nothing herein should be construed as constituting an

additional warranty

HP shall not be liable for technical or editorial errors or

omissions contained herein

Strict adherence to the HP standards of business conduct

regarding this classification level is critical.

The information contained in this presentation is proprietary to

Hewlett-Packard Company and is offered in confidence,

subject to the terms and conditions of a binding Confidential

Disclosure Agreement (CDA)

HP requires customers and partners to have signed a CDA in

order to view this presentation. The information contained in this presentation is HP confidential.

This information may only be shared verbally with HP-external customers and/or partners under NDA, and only with HP

Storage director-level approval.

Do not remove any classification labels, warnings or

disclaimers on any slide or modify this presentation to change

the classification level.

Do not remove this slide from the presentation

This presentation is NOT to be used as a “leave behind,” and therefore, should not be distributed or released in either hard-copy or electronic format.

Objectives

• Discuss product feature overview

• Explain overall service goals

• Discuss in detail the installation procedure

• Discuss some troubleshooting tips and techniques

• Discuss some potential upgrading scenarios

After completing this course, you should be able to:

Course agenda

1. Introduction—Product overview

2. Installation service overview and timings

3. Installation prerequisites

4. Installation procedure mains steps

5. Installation procedure details

− Licensing vCenter and vSphere

− InstantOn

− Licensing VSAs

− Creating Datastores

6. Troubleshooting

7. Upgrading

Introduction—Product overview

NEW: Hyperconverged Systems from HPSimply the fastest way to deploy and manage virtual infrastructure

HP ConvergedSystem HC StoreVirtualAdvanced data services, high availability,and heterogeneous interoperability across

physical and virtual application domains

HP is actively investing and building on integrated system momentum using our unique intellectual property while offering customers flexibility and choice

HyperConverged

Deploy applications—Not infrastructure

Applications with high compute requirements andhigh I/O density benefit from hyper-convergence

Medium-sized business

Infrastructure services, manufacturing systems,back office applications, dedicated virtual desktops

Enterprise ROBO

Infrastructure services, directory services, print services,small virtualized file services, point-of-sale applications

Line of Business

Virtual desktops for task workers, virtualized database andweb servers, development and test environments

App App

Simple building block for thesoftware-defined data center

Compact, powerful server platform

HP ConvergedSystem 250-HC StoreVirtual• Compact 2U platform with up to 4 compute/storage nodes

based on latest HP Apollo Gen9 technology

• Three or four identically configured nodes with

– Two Intel Xeon E5-2640v3 or E5-2680v3 processors

– 128GB, 256GB or 512GB memory

– Two 10GbE SFP+ network connectivity

• 1-year 9x5 NBD on-site warranty, 1-year 9x5 software support*

• 4- and 3-node ConvergedSystem 250-HC StoreVirtualcome with redundant fans and require 200-240V power supply (included)

• Orderable on August 17, 2015 and September 28, 2015

• Co-existence with current ConvergedSystem 200-HC StoreVirtual(ConvergedSystem 240-HC and 242-HC StoreVirtual models)

Hybrid Storage Configuration Capacity Configuration

4x 1.2TB SAS SFF + 2x 400GB SFF SSDs~ 7.5TB HA storage for 4-node systems~ 5.5TB HA storage for 3-node systems

6x 1.2TB SAS SFF~ 11.5TB HA storage for 4-node systems~ 8.5TB HA storage for 3-node systems

* Software support covers HP software included with product only; it does not cover hypervisor support. 3- and 5-year HP Care Pack Services available.

Virtualization. Optimized. Delivered.

Purpose-built virtualization applianceInfrastructure building blocks: Optimized computewith software-defined storage, simple to deploy and manage.

Simple, straight-forward out of box experience• 15 minutes of installation time for VMware vSphere environment

• Same experience regardless whether first or fourth appliance

• Easy configuration of all components: vSphere, StoreVirtual

Powerful compute and storage• Scale out to up to eight appliances* in one management zone

• Linear scalability by adding more appliances

• Full vMSC support for stretched vSphere and StoreVirtual clusters

• Customer-installable, -expandable, -serviceable

* OneView InstantOn installs up to four appliances in the same pool; four additional appliances (a total of 32 nodes in the same management zone) is an advanced operation and not recommended in standard installations.

Software ready-to-go for true “plug-and-play”

All software preinstalled, “no assembly required”

Hyper-converged systems from HP provide virtualization and HA storage with rich data services.

Preintegrated software components

• VMware vSphere 5.5 or 6.0*(upgradeable, mix not supported)

• HP StoreVirtual VSA 2014 with LeftHand OS 12.0for clustered, highly available storage

• HP OneView InstantOn

• HP OneView for vCenter

* Hypervisor licenses not included. Valid software license required for pre-installed software. Customer with ELA and vCloud Air Partner can reuse their licenses on this platform. When including VMware Horizon licenses on the same quote, Horizon components are not pre-installed on the system.

Mgmt VM

VMware vSphere

HP ConvergedSystem 250-HC node

App AppApp

StoreVirtual

Installation and setup service overview

Installation service benefits

• Installation and startup carried out by an HP technical specialist or Certified HP Channel Partner

• More efficient installation, provided all service prerequisites have been met before commencement of service

• Help customer’s IT resources to stay focused on their core tasks and priorities

• Delivery of the service at a mutually scheduled time convenient to the customer’s organization

• Availability of an HP service specialist to answer basic questions during the delivery of the on-site installation service

Service feature highlights

Four macro areas

• Service planning

• Service deployment

• Installation verification tests (IVT)

• Customer orientation session

Service features—Planning (1 of 2)

An HP service specialist will contact the customer to schedule the delivery of the services and validate that all pre-delivery requirements and prerequisites have been or will be met before installation.

During this service planning activity, the HP service specialist will work remotely with the customer to plan all the necessary activities, which will include:• Communication and verification of the OS, hardware, software, driver, and environmental prerequisites

required for the installation of HP ConvergedSystem 250-HC StoreVirtual System

• Collection, using a pre-delivery checklist, of the information needed to plan the deployment, including confirmation that the server firmware is supported and determination of any steps needed to bring them within specifications, if applicable before delivery of the installation services

Service features—Planning (2 of 2)

• Datastore design, up to a limit of 10 datastores, that the customer wishes to have implemented as part of the installation services

• Preinstall verification that the proposed network configuration meets product specifications

• Preinstall verification on the configuration, subject to limitations (discussed later) and review of the service deployment activities

• Scheduling the service delivery at a time mutually agreed upon by HP and the customer

Service features—Deployment

• Installation of the hardware into a customer-supplied rack

• Connection of customer-supplied and pre-run network cabling to the enclosure and server nodes, if applicable

• Creation of a management group through the preinstalled HP OneView InstantOn software

• Creation of up to 10 datastores, as specified by the Customer through the VMware vCenter process

Service features—Installation verification and testingHP will run the appropriate installation verification tests required for this service.

Service features—Customer orientation

• Upon completion of the installation, the HP service specialist will conduct a brief orientation session on the HP 250 Series HC StoreVirtual Storage product usage and special features and will be available to answer questions, as appropriate.

• This orientation session will be completed on the same day of the installation and will specifically cover a demonstration of the vCenter basic features.

• The customer is responsible for ensuring attendance at this session and providing the necessary logistics to enable HP to provide the orientation session. The following topics may be covered as part of this session:

− Management groups, clusters, and datastores

− Review of basic maintenance tasks to be performed on a regular basis

NOTE: The orientation session is informal and is not intended as a classroom activity or as a substitute for formal product training. (Other subject areas, such as hardware management, security, volume management, and snapshots, are covered by HP Education Services training courses.)

Service limitations—What’s not included (1 of 2)

Services will be performed during local HP business days and hours, excluding HP holidays.

The on-site service is delivered as a single event at one physical site on a single 250-HC StoreVirtual product.

Activities such as, but not limited to, the following are excluded from this service:• Implementation of software revisions, including hot fixes, patches, service packs, or upgrades from prior

versions, on the customer’s existing SAN, host, and application environment

• Application integration or integration of third-party products or peripherals not included with the system

• Backup, recovery, and support of the operating system, other software, and data

• Operational testing of applications, or additional tests requested or required by the customer

Service limitations—What’s not included (2 of 2)

• Planning, design, or implementation of the Customer’s overall SAN, blade, or fabric architecture

• Reorganization of existing racks to create space for the HP ConvergedSystem 250-HC StoreVirtual system hardware

• Installation and configuration of switches, routers, or network gateways

• Integration with any hardware or software components not supported by the HP 250 Series HC StoreVirtual product

Service features—Customer responsibilities

The customer will:• Contact an HP service specialist within 90 days of date of purchase to schedule the delivery of the service

• Ensure that all service prerequisites as identified in the Service eligibility section have been met prior to delivery of the on-site services.

• Ensure all hardware, firmware, and software required for installation by the HP service specialist are available on the scheduled delivery date, and for software, all operating and software products are properly licensed.

Refer to the Service Data Sheet for more details.

Document Number- 4AA5-6760ENN, July 2015, Rev. 1

Installation service timings

Installation and Startup Service Overview TimingsPhase Activity Estimated Time

Pre-sales Pre-sales Planning n/a

Pre-deliveryPM: 30 minutes

Service Planning varies

Customer Interview PM: 30 minutes

Schedule date for Service n/a

DeliveryCE: 4 hours

Service Preparation CE: 30 minutes

Hardware Installation CE: up to 2 hours

System Startup – VMWare Licensing CE: 15 minutes

OneView InstantOn and StorageVirtual Licensing CE: 30 minutes

Datastore Creation (up to 10) CE: 15 minutes

Verification and Customer Orientation CE: 30 minutes

Installation prerequisites

Pre-delivery checklist

An HP service specialist will contact the customer to schedule the delivery of the services and validate that all pre-delivery requirements and prerequisites have been or will be met before installation.

During this service planning activity, the HP service specialist will work remotely with the customer to plan all the necessary activities, which will include:• Communication and verification of the OS, hardware, software, driver, and environmental prerequisites

required for the installation of HP ConvergedSystem 200-HC StoreVirtual System

• Collection, using a pre-delivery checklist, of the information needed to plan the deployment, including confirmation that the server firmware is supported and determination of any steps needed to bring them within specifications, if applicable prior to delivery of the installation services

Preinstallation Worksheet

-Included in the Installation Guide

-Includes

-Physical hardware and connections

-IP addresses

-Licenses

-General settings including DNS, Mail Server,

and NTP

Pre-delivery checklist contents (1 of 2)

Product Pre-requisites

8 x 10 Gbe ports – and cables

4 x 1 Gbe ports – and cables

Verify 10 Gbe switches are IPv6 capable

23 IPv4 addresses –contiguous or 3 ranges one for each subnet (vMotion, ESX mgmt. and iSCSI)

Note: additional systems must be on the same subnet(s); plan the first system accordingly

3 vLANs (optional) vMotion, ESXi Management and iSCSI (ESX tagging and switch configuration)

Network drops and cables are prepared and ready for connections in supplied rack

Power availability 220v (x2)

Specify up to 10 data stores to be setup during installation service

Note: This installation service does not include design or creation of VMs

Pre-delivery checklist contents (2 of 2)

Other areas included in pre-delivery checklist are:• System Credentials (System Usernames and first time setup passwords)

• License Details (vCenter)

• Customer Contact Details

Service Pre-requisites

Laptop to access HP OneView Instant On

Management access to Node 1 Note: network cable will be required

Name of the HP StoreVirtual management group

DNS, NTP and eMail settings

VMware vCenter and vSphere License

Note: The HP StoreVirtual VSA Licenses will be obtained during the installation.

All you need are 8 network connections—and you are ready to go

Physical network connectivity

10GbE ports are used for all traffic classes• Applications

• Storage

• Management

• vMotion

− Four iLO ports should be connected to1GbE infrastructure

− Appliances comes without SFP+ transceiversor DAC option, can be included with the order

− 1GbE port 2 on node 1 is used for initial setup

− All other ports are covered with a“Do not use” plugs for simplicity

2x 1GbERJ 45 ports

(not used)

Serial/USB/Video(fits HP 36-pin Dongle)

HP SmartArray P440(with 4GB cache)

USB 3.0 connector(for USB-based Factory Reset)

DedicatediLO4 port

1GbE for initial installationof first appliance

(RJ 45 port)

2x 10GbE forprimary network connectivity

(SFP+ ports)2x 1400W

Power Supplies

Installing ConvergedSystem 250-HC StoreVirtual—Main steps

Gather information about network setup and prepare workstation

Step 1: Prepare the installation

Networks for ESXi, vMotion, Storage• VLAN w: 5 IPv4 contiguous addresses for ESX hosts

− 1 per vSphere host and 1 for Management VM/vCenter

• VLAN x: 4 IPv4 contiguous addresses for vMotion

− 1 per node tag

• VLAN y: 14 IPv4 contiguous addresses for storage

− 5 IPv4 for StoreVirtual VSA (4+1 VIP), 8 iSCSI Initiators (2 per vSphere node), 1 Management VM

• VLAN z: Virtual machines

Network switches must be IPv6 enabled

Network services: DNS, mail server, (NTP)

Workstation/Laptop• 1 Windows or Linux station

• Remote Desktop Client

• IP configuration: Address on 192.168.42.0/24 that is not 192.168.42.100

SFP+ orDAC

IPv6 enabled

VLANsw,x,y,z

Making the connection to the existing infrastructure

Step 2: Connect networking and power

Network (minimum configuration)• Connect 2x 10GbE connections for nodes 1 through 4

• SFP+ or DAC options are not included (must be ordered or be available at the customer site)

• Connect port #2 on node 1 to a private network segment or workstation

− Management VM IP is 192.168.42.100 and is reachable through this port

− Credentials: administrator/hpcs200HC!

Power• Connect PDU power cables to the two power supplies

2x 10GbE ports

2x PDUI power

1x 1GbE ports

Customization of the appliance

Step 3: OneView InstantOn

(Connect to the management VM from your laptop/workstation) 1. OneView InstantOn starts up

2. Accept VMware/HP EULAs and go through the wizard for

− IP address assignments

− StoreVirtual credentials

− Network services

3. Roll out configuration to the system

NOTE: Apply vCenter license before using InstantOn because the 60-day license applied at the factory might have expired.

OneView InstantOn

InstantOn will complete the configuration of the system including IP addresses and:• Configure ESX (4 nodes)

• Configure VSA (4 nodes)

• Create management group

• Create storage cluster

And apply vSphere and StoreVirtual licenses

Step 4: Provision virtual machines

Almost done…• Log in to vCenter to provision first virtual workloads.

• Last page of OneView InstantOn shows reminder to apply VMware vSphere licenses and StoreVirtual licenses

StoreVirtual must be licensed within 60 days!1. To license vSphere:

− Log in to vCenter and apply vSphere/vCenter license keys(link to vCenter shown on last page of the installation wizard)

2. To license StoreVirtual:

− Use MAC addresses on the last page in OneView InstantOn to generate four license files on http://www.myhplicensing.hp.com/

− Log in to the management group using StoreVirtual Centralized Management Console to apply the four license files in bulk

Learning check

(1 of 2)

Learning check

How many IP addresses are required to set up the system?

(1 of 2)

Learning check

How many IP addresses are required to set up the system?

(2 of 2)

Learning check

How many and what kind of customer network connections are required?

a) 8 * 10Gb/s

b) 6 * 10Gb/s and 4 * 1Gb/s

c) 16 * 10Gb/s

d) 4 * 10Gb/s

(2 of 2)

Learning check

How many and what kind of customer network connections are required ?

a) 8 * 10Gb/s

b) 6 * 10Gb/s and 4 * 1Gb/s

c) 16 * 10Gb/s

d) 4 * 10Gb/s

8 (2 per node) * 10Gb/s for the iSCSI connections

4 * 1 Gb/s for the ILO connections (optional)

Applying vCenter and vSphere licenses

Applying VMware vCenter/vSphere licenses (1 of 6)

Steps to apply the VMware vCenter license: 1. Connect laptop/workstation with a 1 GbE port that is capable of running Microsoft Windows Remote

Desktop Services.

2. Configure the 1 GbE laptop/workstation port to use the static IP address 192.168.42.99 with subnet mask 255.255.255.0 (a gateway address is not required).

3. From the laptop/workstation, start Remote Desktop Connection. In the Computer box, enter 192.168.42.100, and then click Connect.

4. In the Windows Security dialog box, enter the credentials: administrator is the user name and hpcs200HC! is the password.

• From the 200 HC Windows Start menu,launch VMware vSphere Client and log in with

− User nameadministrator@vsphere.local

− Passwordhpcs200HC!

• Select Home

• Select Licensingon the Administratorsection

• To add new licenses click the “+” button

• Enter your vSphere license and vCenter license in the New License field

• Select the Next button

• Select the vCenter Serverdrop-down box, then select the HPCS200HC-SV-MG to license and select the vCenter License added before

• After the license is applied, you will see the license assigned to HPCS200HC-SV-MG vCenter

InstantOn procedure details

OneView InstantOn—Introduction

OneView InstantOn—Accept license agreements

OneView InstantOn—Health check

• The health of all controllers will be checked as well as the connection to vCenter

NOTE: If the health status is red, possible causes are incorrect cabling, licenses not applied, trial vCenter license expired, and nodes not fully seated.

OneView InstantOn—IP assignments

• Insert the starting IP addresses for theESX components, vMotionand the Storage Network

OneView InstantOn—Set StoreVirtual credentials

• Enter the user name and password that will be used to set up the StoreVirtual

OneView InstantOn—General and mail settings

OneView InstantOn—Configuration review

OneView InstantOn—Deployment in progress

OneView InstantOn—Next steps

OneView InstantOn—Obtaining the MAC addressesfor licensing

MAC Address IPVSA 1 00:0C:29:3D:65:42 10.100.9.170VSA 2 00:0C:29:73:A5:4C 10.100.9.171VSA 3 00:0C:29:F9:FF:F7 10.100.9.172VSA 4 00:0C:29:00:02:81 10.100.9.173

Right-click and select Copy All This gives you the MAC addresses to register the VSAs

OneView InstantOn—Updates

1. Download the latest version ofHP OneView InstantOn athttp://www.hp.com/go/cs200updates

2. Copy the file that you downloaded (InstantOn_Installer_1.x.x.x.xx.EXE) to the Management VM

3. To start the installation, double-click the InstantOn_Installer_1.x.x.x.xx.EXE file

4. When the installation is complete, on the desktop, click the HP OneView InstantOn shortcut

NOTE: If HP OneView InstantOn is running on the Management VM, close it.

Licensing the VSAs

Licensing the VSAs—Registering the system

• Click the Launch the HP Licensing Portal hyperlink on the last page of InstantOnto go to the licensing site

Licensing the VSAs—Entering the EON

• Enter the EONreceived with the system to get the license information

Centralized Management Console—Enter the licenses (1 of 2)

Centralized Management Console—Enter the licenses (2 of 2)

Selecting the license file

NOTE: You might have to change the file extension from .dat to .lic.

Licensing—Selecting each VSA

Demo: HP OneView InstantOn

OneView InstantOn SimulatorAvailable internally and on the Partner Portals

Creating datastores

• Select theHP Management tab

Creating datastores—Specifying storage

• Enter the number of datastores

• Choose thenetwork RAID Levelrequired

• Click Next

Creating datastores—Defining datastore names

• Enter the datastore name and starting number

• Click Next

Learning check

(1 of 3)

Learning check

The installation service includes the setup of how many datastores?

d) As many as requested

(1 of 3)

Learning check

The installation service includes the setup of how many datastores?

(2 of 3)

Learning check

Which license should be applied before starting the InstantOn setup procedure?

a) VSA licenses

b) vCenter license

c) vSphere license

d) VSA license and vSphere license

(2 of 3)

Learning check

Which license should be applied before starting the InstantOn setup procedure?

a) VSA licenses

b) vCenter license

c) vSphere license

d) VSA license and vSphere license

(3 of 3)

Learning check

The installation service includes the setup of how many virtual machines?

a) None

(3 of 3)

Learning check

The installation service includes the setup of how many virtual machines?

a) None

Service offerings

Installation and Startup Ordering Details

Service Part Number - HA114A1#5WG

Care Pack - U7PE9E

for ConvergedSystem 250-HC StoreVirtual

Service offerings

Available CarePack options• Default/None: 1-year 9x5 NBD parts warranty, 1-year 9x5 software support

• Foundation Care with 9x5 or 24x7

• ProActive Care and ProActive Care Advanced(with 4- and 6-hour call to repair option)

• 3-, 4-, and 5-year options are available

Troubleshooting

Troubleshooting—InstantOn Health screen red

Problem Solution

HP OneView InstantOn does not proceed with deployment because the vCenter license status on the Health screen is red.

Apply a valid vCenter and vSphere license in vCenter.Close and restart vCenter.

HP OneView InstantOn detects the new license and allows deployment.

Troubleshooting—InstantOn certificate error Problem Solution

When launching the vCenter Web client on the Next Steps screen of the HP OneView InstantOn wizard, a certificate error appears when you attempt to log in.

You can still log in and use the vCenter Web client. The certificate error will not affect use of the ConvergedSystem 200-HC StoreVirtual system.

To resolve the certificate error:When launching the vCenter Web client on the Next Steps screen of the HP OneView InstantOn wizard, a certificate error is displayed when you attempt to log in.

1. After logging in, go to the Home tab of the vCenterWeb client and select HP Management Administration.

2. On the HP OneView for vCenter window, select Install a signed certificate.

3. Follow the steps on the Certificate Management window that appears. You can choose to install a self-signed certificate or a certificate signed by a trusted authority.

Troubleshooting—InstantOn Process hangs

Problem Solution

When configuring the ConvergedSystem 250-HC StoreVirtual system using HP OneView InstantOn, the deployment process hangs and does not complete.

• Verify that your firewall is configured correctly.

• Ensure that the VLAN tags are configured correctly.

• Ping the affected IPv4 addresses to investigate cause.

• Ensure that the switches are configured correctly.

• If the connection to a node does not open, troubleshoot that specific node.

• If there are IP address conflicts, ensure that the IPaddresses that are validated on the IP Assignmentscreen are not in use.

Troubleshooting—vCenter Plug-in tab not showing

Problem Solution

Under certain circumstances, the HP vCenter plug-intab does not show in the vSphere Web Client.

1. Log out of vCenter Web Client using the logout option.

2. In your web browser, clear the cache and history, and then close it.

3. From Windows Services, stop the VMware vSphere Web Client service.

4. On the Management VM, delete all files in this directory: C:\ProgramData\VMware\vSphere WebClient\vc-packages\vsphere-client-serenity

5. Start the VMware vSphere Web Client service.

Upgrading

with HP OneView InstantOn

Adding more compute and storage resources

Add up to four appliances intoone management zone

Easy steps to configure

1. Connect to the management VM in the existing management zone

2. Run OneView InstantOn

3. Select Expand Appliance from the menu

4. Wait for the new resources to be discovered

5. Assign new IP addresses

6. Go to vCenter instance

Hyperconverged scale-out

Adaptive OptimizationTier 0

Scale-out Compute/Storage

• Compact form-factor

• Powerful compute and storage

• Redundant 10GbEnetworking

CS 250-HC StoreVirtual

Virtual machines and applications reside on all CS 250-HC systems

10 GbE ToR switchesNetworking

HP OneView 4 VC

for ConvergedSystem 250-HC StoreVirtual

Additional storage

Adding or connecting storage resources is easy• Use the StoreVirtual Centralized Management Console

on the Management VM

• Add StoreVirtual instances to thesame or new storage pool

• Add storage pool to OneView for vCenter storage management

At this time, only iSCSI connectivity is supported

Resources

For more information

• HP 250/200 Series HC StoreVirtual Storage Installation and Startup Service Data Sheet - # 4AA5-6760ENN

• HP 250/200 Series HC StoreVirtual Storage Installation Guide - # M0T03-90017

• HC StoreVirtual Service Delivery Guide (HP internal) – https://ea2013.sharepoint.hp.com/teams/SDG-WW/SDG/cs200-HC-StoreVirtual-IS/default.aspx

• HC StoreVirtual CS250 Quick Specs - # c04622598

Reference documentation

Where to go

www.hp.com/go/hyperconverged

Thank you

Questions?

HP ConvergedSystem 250-HC StoreVirtual System · PDF fileHewlett-Packard Company and is offered in confidence, ... •Creation of a management group through the preinstalled HP OneView

Documents

HPE ConvergedSystem 500 for SAP HANA Scale-up and Scale...

Executive Biography Alon Bar-Shany - hp. · PDF...

40 40 42 42 rrp0TgroM 4 cervrecrrpy 52 IleAarorit1Ha ... ·...

PageWriter 100 l HP M1772A Cardiograph 0 User’s Guide 0 l....

Technical white paper HP ConvergedSystem 300 for Microsoft.....

HPE Reference Architecture ConvergedSystem 700 …VMware...

QuickSpecs HPE ConvergedSystem 500 for SAP HANA Scale...

HP Verified Reference Architecture for VMware … Reference....

PageWriter TC30 · PDF fileHewlett Packard Str. 2 71034...

HPE ConvergedSystem 500 for SAP HANA Scale-up and · PDF...

HP ConvergedSystem 500 и900 дляSAP...

HEWLETT 'PACKARD - HP · PDF fileHewlett Packard has a...

HP ConvergedSystem 300 for Microsoft Analytics Platform...

HP ConvergedSystem 100 for Hosted Desktops Getting …The...

Hewlett Packard Enterprise Client Advisory Board April ........

Retired QuickSpecs Configurations with the Intel® Xeon® E7...