HOW TO ENROLL FINGERPRINTS - Idemia | Home · biometric device profile needs to be configured with your wiegand value wiegand connection connect wiegand_out0 (green wire –pin 14)

TO WORK WITH ALL SIGMA FAMILY

HOW TO ENROLL FINGERPRINTS

ACRONYMS

UP=USER POLICYUAM=USER AUTHENTICATION MODEBDP=BIOMETRIC DEVICE PROFILEMM=MORPHO MANAGERACP=ACCESS CONTROL PANEL

MORPHOMANAGER DEFAULT LOG IN

USERNAME-ADMINISTRATOR

PASSWORD-PASSWORD

ADD AN BIOMETRIC DEVICE

Administration>Biometric Device

Biometric devices from three different hardware families can be added here; the MA 100, MA J, MA 500, and MA VP family, the MA Sigma, MA Sigma Lite And MA Sigma Lite + MA Sigma Extreme, the Morpho 3D Face, the MorphoWave Tower, MorphoWave Compact, and the Morpho Tablet Terminal.

ADD THE DEVICE AS THE EXAMPLE BELOW

CLIENTS

Path Administration>Clients

Clients are computers that have the MorphoManager Client software installed and communicate with aMorphoManager server

Next pages is if you do not own a MSO for capturing fingerprints

ADD YOUR SIGMA TO YOUR CLIENT

Click Next 3 Times

USE A SIGMA TO CAPTURE

FINGERPRINTS

**IF YOU DO HAVE A MSO NO

CHANGES NEED TO TAKE PLACE

DROP DOWN

SELECTED

MORPHOACCESS

SEARCH FOR THE

READER

BIOMETRIC DEVICE PROFILE

Path Administration>Biometric Device Profile

The Biometric Device Profile will define common settings and parameters for one or more biometric devices. This profile can be applied when adding units into the system from the Biometric Device section of Administration

BIOMETRIC DEVICE PROFILE

CREATE OR EDIT THE BIOMETRIC DEVICE PROFILE

WIEGAND PROFILE: IS WHAT FORMAT YOUR ACP IS LOOKING FOR

BIOMETRIC DEVICE PROFILE

SET THE MULTI-FACTOR MODE TO BIOMETRIC ONLY

BIOMETRIC DEVICE PROFILE

USER POLICY

Path Administration>User Policy

Create new User Policy

Select the User Policy that this user will belong to. This is an important selection, as the policy will determine Biometric Device access and other access control and time & attendance settings.

USER POLICY CREATE A NEW USER POLICY

SELECT THE WIEGAND PROFILE YOU WISH TO USE FOR USERS IN THIS USER POLICY.

USER AUTHENTICATION MODE IS BIOMETRIC(1:MANY)

CLICK TWO FOR FINGER BIOMETRICS

USER POLICY

NONE FOR WAVE ENROLLMENTS

USER POLICY

ENROLLMENT PROCESS

USER MANAGEMENT

Users are people who will have their biometric data sent to the selected Biometric Device for identification purposes for either access control or time and attendance.

CREATE A NEW USER WITH THE USER POLICY CREATED EARLIER

USER MANAGEMENT

MANUALLY TYPE IN THE USER ID NUMBER, THIS NUMBER WILL BE SENT TO YOUR ACP

USER MANAGEMENT

CAPTURE YOUR FINGER PRINTS

USER MANAGEMENT

FINAL RESOLUTION

ONE USER POLICY NEED TO BE CREATED FOR BIOMETRIC ONLY

BIOMETRIC DEVICE PROFILE NEEDS TO BE CONFIGURED WITH YOUR WIEGAND VALUE

WIEGAND CONNECTION

CONNECT WIEGAND_OUT0 (GREEN WIRE – PIN 14) TO ACP DATA 0,

CONNECT WIEGAND_OUT1 (WHITE WIRE – PIN 16) TO ACP DATA 1,

CONNECT WIEGAND_GND (BLACK / RED WIRE – PIN 20) TO ACP READER COMMON (0VDC).

Please visit our website, service.morphotrak.com for

software, firmware, videos and PDF’S

WEBSITE