HAPS A300 Montageanleitung / Mounting instruction · HAPS A300 Montageanleitung / Mounting instruction Technologie in Aluminium Haps GmbH + Co. KG Langenberger Straße 131-133 D-42551
Post on 18-Oct-2020
5 Views
Preview:
Transcript
Ø 10 mm
Top/Oben
4/5/6 mm
Ø 6 mm
1 Direktverschraubung/direct screwing
Hinterlegplatten/backing plates
min. 1,7 mm
min. 1,7 mm
Technische Änderungen vorbehalten. Für Irrtüm
er und Druckfehler
über nehmen w
ir keine Haftung. Subject to technical m
odification without
prior notive. We w
ill disclaim any liability for errors and m
isprints.
Technologie in Aluminium
HAPS A300Montageanleitung / Mounting instruction
Technologie in Aluminium
Haps GmbH + Co. KG Langenberger Straße 131-133D-42551 Velbert/Germany
Telefon (0 20 51) 2801- 0 Telefax (0 20 51) 2801-50 www.haps.de info@haps.de
Technische Änderungen vorbehalten. Für Irrtümer und Druckfehler über nehmen wir keine Haftung.
Subject to technical modification without prior notice. We will disclaim any liability for errors and misprints.A042016/D 8010831000Montageanleitung / Mounting instruction
HAPS A300 | 2-teilig Direktverschraubung/HinterlegplattenHAPS A300 | 2-leaf direct screwing/backing plates
09
1309-CPD-0112 EN 1935:2002
HAPS GmbH + Co. KGLangenberger Str. 131-133 / 42551 Velbert / Germanyhttp://www.haps.de
4 7 6 0 1 4 1 13
4
8
5
9
6
7
2
max.15 Nmmax.max.
15 Nm15 Nm
max.15 Nmmax.max.
15 Nm15 Nm
3
3x=
-1 +4 mm
-3 +3 mm
-0,75 +0,75 mm
-0,5 +0,5 mm
max.1 Nmmax.max.1 Nm1 Nm
71 9027 00 00
Widerstandsklasse/resistance class 2
6.1
6.26.26.2
max.15 Nmmax.max.
15 Nm15 Nm
-0,5/0/+0,5 mm
2 3
Montageanleitung / Mounting instructionHAPS A300 | 3-teilig Direktverschraubung/HinterlegplattenHAPS A300 | 3-leaf direct screwing/backing plates
2x=
09
1309-CPD-0115 EN 1935:2002
HAPS GmbH + Co. KGLangenberger Str. 131-133 / 42551 Velbert / Germanyhttp://www.haps.de
4 7 7 0 1 4 1 14
Ø 6 mm
Top/Oben
4/5/6 mm
71 9027 00 00
3x= Widerstandsklasse/
resistance class 3
Widerstandsklasse/resistance class 2
Ø 10 mm
1
4
8
5
9
6
10
7
11
max.15 Nmmax.max.
15 Nm15 Nm
max.1 Nmmax.max.1 Nm1 Nm
max.1 Nmmax.max.1 Nm1 Nm
!-3 +3 mm
-1 +4 mm
-0,75/-0,25/+0,25/+0,75 mm
Direktverschraubung/direct screwing
Hinterlegplatten/backing plates
min. 1,7 mm
min. 1,7 mm
5.1 5.2
top related