Furniture – light as a feather - ΔΟΜΕΣdomesindex.com/media/companies/catalogs/companies...• Kitchen worktops • Office and conference tables • Shelving systems Processing

Fitting systems for constructing furniture using lightweight panels

NewproductAerofix 100

Furniture –light as a feather

The lightweight panel innovation

2 For further information visit www.hafele.com

Lightweight panel innovation

New material – new connectors

Rafix 20:The Rafix connector, which has beenused millions of times, has beenredesigned in order to to connectlightweight panels without frame in astylish and positively-fitting way.

Tab 20HC:The Tab 20HC combines the advan-tages of the Tab18 shelf connectorwith those of the well-tried Minifix,and is extremely suitable for light-weight panels without frame.

Aerofix 100:This adhesive insert connects bothtop layers by means of the integra-ted adhesive. Suitable for lightweightpanels with a top layer from 4 mm.

This high-tech material is one of the greatest innovations in furni-ture construction.Light weight, high strength and extremely flexible design capabilityare demands that designers make of furniture that has thickpanels but still has to be mobile. As a pioneer in connecting fit-tings for lightweight panels without frame, Häfele is the first com-pany to develop connectors that make it possible to create extre-mely robust, load-bearing structures with this innovative material –and has been presented with innovation awards for it.

The lightweight panel innovation

New material –well-tried connectors

Varianta HC Special screw:The Varianta screw is suitable for lightweight panels witha top layer from 4 mm. The special thread design allowsattaching shelf supports, rail end supports, rear panelconnectors and drawer runners.

Worktop connectors for lightweight panels

Maxifix 35HC:The successful heavy-duty Maxifix connector is ideal asthe basis for making stable connections in multi-sectionworktops in kitchens. The new construction provides anabsolutely flush working surface because of its integratedheight adjusting facility. The drilling pattern corresponds tothe kitchen standard. The advantages are obvious: Thecombination of lightweight panels and the Maxifix 35HCworktop connector cuts down the weight and saves timeand money.

InformationLightweight panel fittingsNew products and systemsNew products and systemsDimensional data not binding. We reserve the right to alter specifications without notice.

Lightweight panel fittingsHäfele is a pioneer in connecting fittings for lightweight panels without frame, and was one of the first companies to develop connectors that make it possible to create extremely robust, load-bearing structures using this innovative material.Specifically developed lightweight panel fittings and the existing well-known fittings are available to the building trade and industry for furniture construction with lightweight panels.

Structure Characteristics ApplicationLightweight panels consist of three basic elements.• Top layer (top side and bottom side)• Core (e.g. hexagonal honeycomb,

corrugated honeycomb,...)• Frame (optional with or without frame)

Lightweight panels provide excellent properties for use in furniture construction.• Reduced weight• Optimised transportation• Conserves resources• High stability, high load-bearing capacity

and long service life• Large span widths (very little sagging)• Considerable amount of design freedom

Lightweight panels can be used in a wide range of areas in furniture construction and shopfitting. Possible applications are:• Free standing cabinets of all types• Kitchen worktops• Office and conference tables• Shelving systems

Processing Connectors for lightweight panels

Adhesive insert and screws for lightweight panels

Sawing As with solid chipboard, with scribing saw if possible (according to the tool manufacturer's specifications)

Rafix 20 HC, Tab 20 HC Aerofix 100

Drilling As with solid chipboard

Milling Up-cut

Coating Note manufacturer's pressure specification

Maxifix 35 HC Varianta special screw

Edging With reinforcing and decorative edging strip for 4 mm top layer, with decorative edging strip for 8 mm top layer

InformationLightweight panel fittings

g g p g p y p y g g p

Connectors, adhesive insert and screws for lightweight panels

Overview according to application

Different connectors are required for the different structures of lightweight panels.Standard fittings can be used for lightweight panels with frame, for example. However, it must be taken into consideration that these fittings must be fitted in the frame area.

Specifically developed connectors, adhesive inserts and screws are used for lightweight panels without frame.2 solutions have been developed for connecting and attaching to panels with a top layer of 4 mm and above.• Rafix 20 HC and Tab 20 HC, as connectors with variable use.• Varianta special screw, for screwing into the top layer.• The Aerofix 100 adhesive insert bridges the gap (mechanically and chemically)

between the 4 mm top layers.For top layers of 8 mm and above• Standard fittings and Tab 20 HC, as connectors with variable use.• Varianta special screw, for screwing into the top layer.• Chipboard screws and Varianta screws, for screwing into the top layer.

Lightweight panel with frame

Connectors Page Inserts and screws Page

• In the frame area: All standard fittings can be used

• In the frame area: Chipboard screws and Varianta screws

• Outside the frame area: Rafix 20 HC or Tab 20 HC Varianta special screw or

Aerofix 100 adhesive insert

Top layer 4 mm• In the frame area:

All standard fittings can be used• Varianta special screw or

chipboard screws and Varianta screws• Outside the frame area:

Tab 20 HC

Top layer 8 mm

Lightweight kitchen worktop

• Maxifix 35 HCFor lightweight panels with one-sided frame or without frame in the connector area

• Varianta special screw or chipboard screws and Varianta screws

Top layer 8 mm

Lightweight panel without frame

• Rafix 20 HC or Tab 20 HCAerofix 100 adhesive insert

Top layer 4 mm• Tab 20 HC • Varianta special screw or

chipboard screws and Varianta screws

Top layer 8 mm

86/7 • Outside the frame area:

8/96/7 • Varianta special screw or

InformationLightweight panel fittings

Connection Technology, Shelf SupportsLightweight Panel FittingsTab 20 HC ConnectorNew products and systemsNew products and systemsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

Connector housingFor 32 mm thick wood

For 40 mm thick wood

For panel thickness 32 mm

• Area of application: For lightweight panels with a top layer (chipboard or MDF) of 4 mm and above• Suitable for: Lightweight panels without frame• Diameter: Boss insert 20 mm• For wood thickness: 32 – 60 mm• Dim. A: Distance from centre of Varianta special screw to top edge of lightweight panel• Drilling depth: 22 or 26.5 mm

Packing: 100 pieces

• Material: Support and tightening element: Zinc alloy, boss insert: Plastic

• Finish: Support and tightening element: Nickel plated or black, boss insert: Untreated

• Drill hole Ø: Boss insert 20 mm, Varianta special screw 3 or 5 mm

• Drive: PZ2, PH2 or flat blade

For wood thicknessmm

Dim. A mm

Drilling depthmm

Black Nickel plated

32 - 50 16 22 263.95.332 263.95.732

• Material: Support and tightening element: Zinc alloy, boss insert: Plastic

• Finish: Support and tightening element: Nickel plated or black, boss insert: Untreated

• Drill hole Ø: Boss insert 20 mm, Varianta special screw 3 or 5 mm

• Drive: PZ2, PH2 or flat blade

Dim. A mm

Drilling depthmm

Black Nickel plated

40 – 60 20 26.5 263.95.335 263.95.735Varianta special screws for lightweight panels 9page

Lightweight Panel FittingsTab 20 HC Connector

Connection Technology, Shelf SupportsLightweight Panel FittingsRafix 20 HC ConnectorNew products and systemsNew products and systemsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

Connector housingFor wood thicknesses from 32 mm

Connection Technology, Shelf SupportsRTA connectorRafix Industrie boltNew products and systemsNew products and systemsPlanning and ConstructionM20 connecting boltFor Ø 5 mm drill hole

• Area of application: For lightweight panels with a top layer (chipboard or MDF) of 4 mm and above• Suitable for: Lightweight panels without frame• Diameter: Boss insert 20 mm, dowel 5 mm• For wood thickness: 32 - 50 mm• Dim. A: Distance from centre of Varianta special screw to top edge of lightweight panel• Drilling depth: 22,5 mm

Packing: 500 pieces

Packing: 100 or 2000 pieces

• Material: Boss insert: PlasticTightening element: Zinc alloy

• Drill hole Ø: Boss insert 20 mm, dowel 5 mm• Drive: PZ2 cross slot

Dim. Amm

Drilling depthmm

Colour Cat. No.

32 - 50 16 22.5 Brown 263.18.102White 263.18.702Black 263.18.302Nickel colour lacquered

263.18.602

• Material: Zinc alloy• Thread: Special thread• Drive: PZ2 cross slot

Thread length L mm Galvanized7.5 263.20.131

Lightweight Panel FittingsRafix 20 HC Connector

Connection Technology, Shelf SupportsLightweight Panel FittingsAerofix 100 Adhesive insertNew products and systemsNew products and systemsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.Technology

Areas of application

Installation

Häfele developed the Aerofix 100 adhesive insert (also referred to as insert or adhesive dowel) specifically for lightweight panels with a top layer of 4 mm.It is easy to install, and can be processed manually or by automatic machines.The Aerofix 100 adhesive insert is available for panel thicknesses of 25 – 60 mm.

The Aerofix 100 adhesive insert bridges the gap (mechanically and chemically) between the 4 mm top layers of the lightweight panel.

The following can be screwed into the adhesive insert:• 3.5 and 4.0 mm chipboard screws• 3.0 mm Varianta screws• 3.0 mm connecting bolts Cat. No. 263.20.805

• Connectors• Shelf supports• Mounting plates and hinges• Rear panel connectors• Runners• Sliding door fittings• Castors• Table legs and furniture feet• Locking systems• Furniture handles and decorative fittings

3.5 and 4.0 mm chipboard screws

3.0 mm Varianta screwsA Adhesive cartridgeB HousingC Inner element

3.0 mm connecting boltsCat. No. 263.20.805

Drill 10 mm hole into upper top layer in required position. Use a drilling depth that ensures that the core and its residual adhesive are also removed as far as the lower top layer.

Push Aerofix 100 adhesive insert into drill hole until it mechanically engages. This ensures that screws and bolts can be screwed into the adhesive insert immediately after installation.Please note that the adhesive insert may not be subjected to the full mechanical load immediately after installation.

The chemical adhesion process takes place when the insert is pressed in. The single-component PUR adhesive distributes itself between the upper and lower top layers and is fully cured within 16 hours.Once the adhesive is cured the insert can be subjected to the maximum load.

• Area of application: For lightweight panels with a top layer of 4 mm• Material: Plastic, integrated single-component PUR adhesive• For drill hole Ø: 10 mm• Suitable for: Lightweight panels without frame• Axial pull-out resistance 700 – 950 N

(honeycomb panels with thin chipboard top layer of 4 mm)

For panel thickness Cat. No.mm25 039.70.25428 039.70.28430 039.70.30432 039.70.32434 039.70.34438 039.70.38440 039.70.40450 039.70.50460 039.70.604

Lightweight Panel FittingsAerofix 100 Adhesive insert

Connection Technology, Shelf SupportsLightweight Panel FittingsVarianta Special screw for lightweight panelsNew products and systemsNew products and systemsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.Technology

Installation

Häfele developed the Varianta special screw for lightweight panels with a top layer of 4 mm and above. It can be processed like a chipboard screw and used for all panel thicknesses.

The special thread design of the Varianta special screw provides a firm grip in top layers of 4 mm and above.

Drill 3 mm or 5 mm hole into top layer in required position.

Screw in the Varianta special screw for lightweight panels. The screw can be subjected to maximum load after installation.

Application• Connectors• Shelf supports• Rear panel connectors• Wardrobe rails/rail end supports• Runners

• Material: Steel• Finish: Galvanized

For drill hole Ø Thread length L Cat. No.mm mm3 14 013.30.9005 13 013.30.910

Lightweight Panel FittingsVarianta Special screw for lightweight panels

Lightweight Panel FittingsShelf supportsConnection Technology, Shelf SupportsLightweight Panel FittingsShelf supportsPrices · Availability · OrderingNew products and systemsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.HC Shelf support with visible screws For lightweight panels with top layers from 4 mm, without frame

Drilling pattern

Order referenceThe Varianta special screw for lightweight panels is not supplied. Please order separately.

Connection Technology, Shelf SupportsLightweight Panel FittingsShelf supportsNew products and systemsNew products and systemsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.HC Shelf support with concealed screws For lightweight panels with top layers from 4 mm, without frame

Drilling pattern

Order referenceThe Varianta special screw for lightweight panels is not supplied. Please order separately.

• Area of application: For shelves made from lightweight panels with or without frame, or solid wood

• Material: Zinc alloy• Installation: For plug fitting and screw fixing (Varianta

special screws for lightweight panels) into 32 mm series drilled holes

Finish Cat. No.Nickel plated 282.54.701

• Area of application: For shelves made from lightweight panels with or without frame, or solid wood

• Material: Zinc alloy• Installation: For plug fitting and screw fixing (Varianta

special screws for lightweight panels) into 32 mm series drilled holes

Finish Cat. No.Nickel plated 282.54.761

Lightweight Panel FittingsRear panel fittingsConnection Technology, Shelf SupportsLightweight Panel FittingsRear panel fittingsNew products and systemsNew products and systemsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.HC Rear panel holder For lightweight panels with 4 mm top layers, without frame

Installation

Packing: 100 or 1000 pieces H

• Area of application: For fixing 2.8 – 3.8 mm thick rear lightweight panels without frame

• Material: Spring steel 0.3 mm• Finish: Galvanized• Function: The rear panel holder clings beneath the

4 mm top layer and therefore prevents the rear panel from sagging into the core of the lightweight panel

• Installation: In groove without tools

Routing dimensions

Cat. No.Rear panel holder 260.06.900

Lightweight panel fittings and standard fittings1 Rafix 20 HC2 Tab 20 HC3 Aerofix 1004 Aerofix 200 (study)5 Varianta Special screw for lightweight panels6 HC Shelf support7 HC Rear panel holder8 Rail end support9 Concealed hinge and mounting plate10 Drawer runners11 Rear panel connectors12 Plinth adjusters

Connection Technology, Shelf SupportsLightweight Panel FittingsMaxifix 35 HC Worktop connectorNew products and systemsNew products and systemsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.Maxifix 35 HC Worktop connector For lightweight kitchen worktops

The Maxifix 35 HC worktop connector is particularly suitable for strong connections in lightweight worktops in kitchens. The top layer of the lightweight kitchen worktop must be at least 8 mm thick.

Advantages:• Connections secured against loosening• Height adjustment ±2 mm• Drilling pattern complies with the standards of kitchen

manufacturers• Fitting components engage when fitted• Convenient, quick tightening by turning the Maxifix connector

housing

2 versions available• For lightweight kitchen worktops, with frame at one side and

height adjustment facility• For lightweight kitchen worktops, without frame, with height

adjustment facility

Supplied with2 Housing cups1 Maxifix connector housing1 Connecting bolt with pre-mounted knurled nut and pressure plate1 Height adjustment facility

Packing: 20 pieces

• Material: Housing cup and height adjustment facility: Plastic, connecting bolt, knurled nut and pressure plate: Steel, connector housing: Zinc alloy

• Finish: Black, connector housing: Nickel plated, connecting bolt: Galvanized

• Length: Connecting bolts 90 or 165 mm• Diameter: Housing cup: 40 mm• Drive: PZ2 cross slot, SW6 Allen key

For panel thicknessmm

Lengthmm

Cat. No.

For lightweight kitchen worktops with frame at one side50 90 262.89.121

165 262.89.12260 90 262.89.131

165 262.89.132For lightweight kitchen worktops without frame50 90 262.89.021

165 262.89.02260 90 262.89.031

165 262.89.032

With height adjustment facility for lightweight kitchen worktops with frame at one side or for lightweight kitchen worktops without frame

Lightweight Panel FittingsMaxifix 35 HC Worktop connector

• Dimension A: Wood thickness• Dimension B: Drilling depth for housing cup• Dimension C: Routing depth for connecting bolt• Dimension D: Centre of drill hole for housing cup to front edge of

lightweight kitchen worktop• Dimension E: Centre of insert to top edge of lightweight kitchen

worktop

1 Housing cup2 Maxifix 35 connector housing3 Connecting bolt with pre-mounted knurled nut and pressure plate4 Height adjustment facility for lightweight kitchen worktops with frame at one side5 Height adjustment facility for lightweight kitchen worktops without frame6 Adapter for housing cup for 60 mm thick panels7 Adapter for height adjustment facility for 60 mm thick panels

Routing and drilling dimensions

Lightweight kitchen worktop with notched frame Lightweight kitchen worktop without frame

R 50 D

q 4015

Dimension Amm

Dimension Bmm

Dimension Cmm

Dimension Dmm

Dimension Emm

50 46+0.5 42 42 – 51 25–0.5

50 46+0.5 42 80 – 90 25–0.5

60 56+0.5 52 42 – 51 30–0.5

60 56+0.5 52 80 – 90 30–0.5

Lightweight Panel FittingsMaxifix 35 HC Worktop connector

Pictures

The pictures in this brochure were used withthe kind permission of:

Egger GmbH & Co.

Imprint

Reprinting of this brochure or extracts thereof, reprinting or imitation of the illu-strations or imitation of the design is forbidden.

The technical representations and dimensional information in this brochure arenon-binding, including those in the illustrations and drawings.Right reserved to make design improvements.All dimensions in mm unless otherwise specified.

Issued by:Häfele GmbH & Co KGAdolf-Häfele-Straße 172202 Nagold, Germany

Installation

Push housing cup into pre-drilled lightweight kitchen worktop.Allow housing cup to engage.

Push Maxifix connector housing into housing cup.Allow connector housing to engage.

Insert connecting bolt with attached height adjustment facility at top of lightweight kitchen worktop (can be inserted from above or beneath).Allow connecting bolt to engage.

Push in height adjustment facility between top layers as far as it will go.

Join lightweight kitchen worktops vertically together.

Press lightweight kitchen worktops horizontally together.Pre-tighten Maxifix connector housing.

Then align the height of the lightweight kitchen worktops with screw driver.

The lightweight kitchen worktops are firmly connected by turning the Maxifix connector housing.

EuropeHeadquarters GermanyHäfele GmbH & Co KG72202 NagoldPhone +49 (0)74 52 / 95-0Fax +49 (0)74 52 / 95-2 00info@haefele.de

AustriaHäfele Austria GmbH5322 Hof bei SalzburgPhone +43 (0)62 29 / 3 90 39-0Fax +43 (0)62 29 / 3 90 39-30info@haefele.at

BelgiumHäfele Belgium N. V.9240 ZelePhone +32 (0)52 / 45 01 14Fax +32 (0)52 / 45 01 51info@hafele.be

CroatiaHäfele GmbH & Co KGRepresentative in Kroatien10090 ZagrebPhone +38 51 / 3 43 57 40 Fax +38 51 / 3 43 57 41info-croatia@hafele.com

DenmarkHäfele Danmark A/S7800 SkivePhone +45 97 / 51 15 22Fax +45 97 / 51 12 13info@haefele.dk

FinlandHäfele GmbH & Co KGSivuliike Suomessa15200 LahtiPhone +3 58 (0)3 / 8 77 77-0Fax +3 58 (0)3 / 8 77 77-88info@hafele.fi

FranceHäfele France s.à.r.l.95157 Taverny CédexPhone +33 (0)1 / 30 40 54 50Fax +33 (0)1 / 30 40 54 61info@hafele.fr

Great BritainHäfele U.K. Ltd.Rugby, Warks. CV211RD Phone +44 (0)17 88 / 54 20 20Fax +44 (0)17 88 / 54 44 40info@hafele.co.uk

GreeceHäfele GmbH & Co KGInformation Office15124 MaroussiPhone +30 2 10 / 6 17 95 44Fax +30 2 10 / 6 17 95 45info@hafele.gr

HungaryHäfele GmbH & Co KGRepresentative in Hungary1132 BudapestPhone +36 (0)1 / 2 25 34 14Fax +36 (0)1 / 2 02 01 82info-hungary@hafele.com

IrelandHäfele Ireland Ltd.Kilcoole, Co. WicklowPhone +3 53 (0)1 / 2 87 34 88Fax +3 53 (0)1 / 2 87 35 63info@hafele.ie

ItalyHäfele Italia s.r.l.20030 Lentate S.S. -MI-Phone +39 03 62 / 57 74-1Fax +39 03 62 / 57 74-4 77info@hafele.it

NetherlandsHäfele Nederland BV7333 NZ ApeldoornPhone +31 (0)55 / 5 38 46 00Fax +31 (0)55 / 5 42 49 50info@hafele.nl

PolandHäfele Polska Sp. z o.o.55-090 Dlugoleka Phone +48 (0)71 / 3 15 32 42Fax +48 (0)71 / 3 15 32 62info@hafele.pl

PortugalHäfele GmbH & Co KGEscritorio de Vendas Portugal4470-177 MaiaPhone +3 51 (0)22 / 9 47 55 96Fax +3 51 (0)22 / 9 48 15 74info-portugal@hafele.com

RomaniaHäfele GmbH & Co KGReprezentanta în RomâniaRO-500264 BrasovPhone +40 (0)2 68 / 31 19 00Fax +40 (0)2 68 / 31 19 10info@hafele.ro

RussiaHafele Rus OOO MKAD 14. km, Building 10109429 MoskowPhone +7 (495)7 87 / 07 85Fax +7 (495)7 87 / 07 84info@hafele.ru

SerbiaHäfele GmbH & Co KGRepresentative in Serbien37000 KrusevacPhone +3 81 37 / 41 70 10Fax +3 81 37 / 41 70 10info-serbia@hafele.com

SpainHäfele Herrajes España S.L.28923 Alcorcón-MadridPhone +34 91 / 6 44 80 21Fax +34 91 / 6 44 80 28info@hafele.es

SwedenHäfele GmbH & Co KGTyskland Fillial Sverige55303 JönköpingPhone +46 (0)46 36 / 18 00 88Fax +46 (0)46 36 / 18 00 99info@haefele.se

SwitzerlandHäfele Schweiz AG8280 KreuzlingenPhone +41 (0)71 / 6 86 82 20Fax +41 (0)71 / 6 86 82 82info@haefele.ch

TurkeyHafele San. ve Tic. A.S.34776, Ümraniye, IstanbulPhone +90 (0)2 16 / 5 28 59 00Fax +90 (0)2 16 / 5 28 59 30info@hafele.com.tr

UkraineHäfele Ukraine LLC80362 Kulykiv Zhovkva District, Lviv RegionPhone +3 80 32 2 35 15 59Fax +3 80 32 2 35 15 60info@hafele.com.ua

AfricaSouth AfricaHäfele South Africa (Pty) LtdHoneydew 2040Phone +27 (0)11 / 7 96 81 00Fax +27 (0)11 / 7 94 14 90 info@hafele.co.za

AmericaArgentinaHäfele Argentina S.A.B1611GFG-Don Torcuato-Buenos AiresPhone +54 (0)11 / 63 47 26 00Fax +54 (0)11 / 63 47 26 26info@haefele.com.ar

BrazilHäfele Brasil Ltda.Piraquara-Paraná, CEP: 83302-000Phone +55 (0)41 / 30 34 - 81 50Fax +55 (0)41 / 30 34 - 81 52info@hafele.com.br

CanadaHäfele Canada Inc.Burlington, ON L7L 6A8Phone +1 9 05 / 3 36 66 08Fax +1 9 05 / 3 19 44 46info_can@hafeleamericas.com

MexicoHäfele de México S.A.de C.V.El Marqués, Querétaro, México.Phone +52 (0)4 42 / 2 96 86 00Fax +52 (0)4 42 / 2 96 86 20hmxinfomexico@hafele.com.mx

United States of AmericaHäfele America CoArchdale, N.C. 27263Phone +1 3 36 / 4 34 23 22Fax +1 3 36 / 4 31 38 31info_us@hafeleamericas.com

Australia, New ZealandAustraliaHäfele Australia Pty. Ltd.Dandenong, VIC 3175Phone +61 (0)3 / 92 12 20 00Fax +61 (0)3 / 92 12 20 01info@hafele.com.au

New ZealandHäfele (N.Z.) LimitedEast Tamaki, AucklandPhone +64 (0)9 / 2 74 20 40Fax +64 (0)9 / 2 74 20 41 info@hafele.co.nz

Middle EastDubaiHäfele GmbH & Co KGDubai Representative OfficeDubai/U.A.E.Phone +9 71 (0)4 / 2 84 44 06Fax +9 71 (0)4 / 2 86 08 49info@hafele.ae

Far EastChinaHäfele Hardware Technology(Beijing) Co., Ltd.101318 BeijingPhone +86 (0)10 / 80 48 26 86Fax +86 (0)10 / 80 48 28 85 info_bj@hafele.com.cn

Hong KongHäfele GmbH & Co KG HK Representative Office Hong KongPhone +8 52 / 23 68 64 33Fax +8 52 / 23 68 99 72info_hk@hafele.com.cn

IndiaHäfele India Private Limited Mumbai 400 099Phone +91 (0)22 / 66 95 09 20/21Fax +91 (0)22 / 66 95 09 22info@hafeleindia.com

IndonesiaP.T. Häfele IndotamaTangerang 15314Phone +62 (0)21 / 75 87 88 88Fax +62 (0)21 / 75 87 77 77info@hafele.co.id

JapanHafele Japan K.K.Totsuka-ku, Yokohama 244-0806Phone +81 (0)45 / 8 28 31 17Fax +81 (0)45 / 8 28 31 13info@hafele.co.jp

MalaysiaHäfele (Malaysia) Sdn Bhd40150 Shah Alam, SelangorPhone +60 (0)3 / 55 69 25 26Fax +60 (0)3 / 55 69 35 26info@hafele.com.my

PhilippinesHäfele Philippines Inc.Manggahan Pasig City 1611Metro ManilaPhone +63 (0)2 / 6 81 53 52Fax +63 (0)2 / 6 81 53 41info@hafele.com.ph

SingaporeHäfele Singapore Pte LtdSingapore 729504Phone +65 / 64 94 74 00Fax +65 / 64 94 74 01info@hafele.com.sg

South KoreaHäfele Korea Inc.659 Jinu-ri, Dochuk-myon, Gwangju-si, Gyeonggi-doPhone +82 (0)31 / 7 60 76 00Fax +82 (0)31 / 7 60 76 09info@hafele.co.kr

TaiwanHäfele Taiwan Ltd.Taipei County 248, Taiwan (R.O.C.)Phone +8 86 (0)2 / 22 98 00 30Fax +8 86 (0)2 / 22 98 00 31info@haefele.com.tw

ThailandHäfele (Thailand) Limited57 Soi Sukhumvit 64Bangkok 10260Phone +66 (0)2 / 7 41 71 71Fax +66 (0)2 / 7 41 72 72info@hafele.co.th

VietnamHafele Vina Co., Ltd.Ho Chi Minh CityPhone +84 (0)8 / 39 57 31 66Fax +84 (0)8 / 39 57 31 67info@hafele.com.vn

www.hafele.com

Furniture – light as a feather - ΔΟΜΕΣdomesindex.com/media/companies/catalogs/companies...• Kitchen worktops • Office and conference tables • Shelving systems Processing

Documents

Ø Montageanleitung Monteringsveiledning Ú Installation...

Granite worktops London

Sandstone worktops

Granite worktops yorkshire

Buy kitchen worktops

tossB -...

UNDERCOUNTERS, WORKTOPS, SANDWICH/SALAD & PIZZA ... - TUC,.....

Composite Worktops

Granite Worktops Cleaning

Granite Worktops Wiltshire

Marble worktops

Granite kitchen worktops

COMPACT WORKTOPS

Stone Worktops brochure

Granite worktops leeds

Granite Worktops Hertfordshire