Floang, Trunnion Mounted and Top Entry Ball Valvesvahn-tech.com/images/literature/379089832_Trunnion Mounted Ball... · Floang, Trunnion Mounted and Top Entry Ball Valves. Trunnion
Post on 25-Nov-2018
217 Views
Preview:
Transcript
Cast and Forged SteelFloating, Trunnion Mountedand Top Entry Ball Valves
Trunnion Mounted Ball Valve, Cast Steel
L V G A E A
S P L IT 3- P IE C E
F B R B
R F R T J B W
STD TEFLON GRAPH ITE
AS
FS
DBB
DOU- PACKING
A
B
C
D
E
F
G
H
F G DBB H
Vahn-Tech steel ball valves are designed to provide maximum service life and durability.All ball valves have full port design and are manufactured to the American Petroleum Institute Standards API 608 & API 6D, British Standards BS 5351 and also conform to the American Society of Mechanical Engineer’s Standard ASME B16.34.
Design MaterialsStandard body/bonnet materials include nine grades of carbon, low alloy and stainlesssteel. For special applications, they can be supplied in other grades of alloy and stainless steel. Trim, packing and gasket materials can be selected from a wide rangeto match service conditions.
Material of TrimEnd connectionsPacking and Gasket MaterialOperator MountingHandwheel Extensions
Pressure EqualizingAnti-Static or Fire Safe Design
Welded EndsOxygen & Chlorine Cleaning & Packaging
A Operation
E Packing
Extended lever for easy operationalso available with gear box, motoractuators, pneumatic or hydraulicactuators.
combined with live loading, maintainspacking compression under high cycleand sever service applications. Graphitepacking is used for high temperaturesituations.
Body & BonnetB Split or 3-piece, split body & bonnet for12” and smaller sizes. This enableseasy disassemble of components for repair.
FAnti-static - A metallic contact is always
granted between ball and stem/body
to discharge eventual static build-ups
during service.
AS
Full bore or reduced bore. Full bore
control.
BoreC
Double block and bleed - the body cavity is
isolated when the ball is in either fully closed
or fully open position, the medium entrapped
in it can easily be bled to avoid over pressure.
End ConnectionsD
FSH Fire safe designed to API 607 or
BS 6755 to ensure operation
metal-to-metal seal acts as backup if
ordered for compliance with API 607
will be provided with graphite packing
and gaskets.
4
G
L(RF)
L1(BW)
H
W
wt(kg) R F
L 1
20
21
19
Dimension ANS I Class 150Lbal datas of
L(RF)
L1(BW)
H
W
wt(kg) R F
NPS DN
250
7.001788.502167.0017714
35015
13.5
12 /265
7.501909.502417.5019016
40019
15.5
380
8.00203
11.122838.2521020
50027
24.5
41009.00229
12.003059.2523520
50038
32.5
6150
15.50394
18.00457
20.8853024
6008176
8200
18.00457
20.50521
24.6262524
600140132
10250
21.00533
22.00559
25.6265024
600160147
12300
24.00610
25.00635
30.7578024
600205182
14350
27.00686
30.00762
31.0079032
800260241
16400
30.00762
33.00838
36.2592032
800390370
18450
34.00864
36.00914
38.2597032
800510495
20500
36.00914
39.00991
43.381100
32800750726
24600
42.00106745.00114345.251150
32800
12001125
26650
45.00114349.00124550.751290
32800
14001250
28700
49.00124553.00134655.121400
32800
18601640
30750
51.00129555.00139764.121630
32800
21001930
32800
54.00137260.00152470.881840
32800
25302390
36900
60.00152468.00172780.752050
32800
29702760
inmm
inmm
inmm
inmm
inmm
BW
1
2
3
4
56
7
8
9
10
11
12
13
14
15
16
17
18
19
L
NP
S
HM aterials of parts
No Part Name Carbon S teel AS TM M aterials18Cr- 9Ni- 2M o
Carbon S teel
123456789
101112131415161718192021
BodyBonnet
BallStemSeat
Seat InsertSeat Spring
Seat O- RingStem O- Ring
Bonnet GasketBonnet O- RingAntistatic Spring
Lower CoverBonnet Stud
Bonnet Stud NutTrunnion
Trunnion BearingGland Flange
Gland BoltStop Plate
Handle
A351- CF8MA351- CF8MA182- F316A276- 316
A182- F316Glass Filled PTFE
Inconel X- 750VitonViton 2)
Graphite+316Viton
A313- 316A182- F316
A193- B8A194- 8
A276- 316316+PTFE
A351- CF8MA193- B8
Carbon Steel+ZnCarbon Steel
A352- LCBA352- LCB
1)A182- F304A276- 304
A350- LF2+ENP
A313- 304VitonViton 2)Graphite+304Viton
A313- 304A182- F304
A320- L7A194- 4
A276- 304304+PTFEA352- LCBA193- B7
Carbon Steel
Note:1)A105+EN P optional 2)Sp iral wound construction.
A216- WCBA216- WCB
1)A182- F304A276- 304A105+ENP
A313- 304NPRNBR 2)
Graphite+304NBR
A313- 304A216- WCB
A193- B7A194- 2HA276- 304304+PTFE
A216- WCBA193- B7
Carbon Steel
NPS DN
250
8.502168.502167.0017714
3501914
12 /265
9.502419.502417.5019016
4002416
380
11.12283
11.122838.2521020
5003425
4100
12.00305
12.003059.2523520
5004834
6150
15.88403
18.00403
20.8853024
60010182
8200
19.75502
20.50521
24.6262524
600175145
10250
22.38568
22.00559
25.6265024
600200155
12300
25.50648
25.00635
30.7578024
600255185
14350
30.00762
30.00762
31.0079032
800325238
16400
33.00838
33.00838
36.2592032
800485375
18450
36.00914
36.00914
38.2597032
800635516
20500
39.00991
39.00991
43.381100
32800935782
24600
45.00114345.00114345.251150
32800
15001280
26650
49.00124549.00124550.751290
32800
17501375
28700
53.00134653.00134655.121400
32800
22251825
30750
55.00139755.00139764.121630
32800
24502180
32800
60.00152460.00152470.881800
32800
28702260
36900
----------
inmm
inmm
inmm
inmm
inmm
BW
Trunnion Mounted Ball Valve, Cast Steel 150Lb/300Lb
Dimension ANS I Class 300Lbal datas of
Applicable Standards:STEEL BALL VALVE ISO 14313FIRE SAFE, API 607
Design Details:STEEL BALL VALVES API 609/API 6D
ANTI STATIC, API 608STEEL VALVES, ASME B16.34FACE TO FACE, ASME B16.10END FLANGES, ASME B 16.5BUTTWELDING ENDS, ASME B 16.25INSPECTION AND TEST, API 598/API 6D
FULL PORT DESIGNBG BOLTED BONNET/SPLIT BODYFLOATING BALL TYPEBLOW-OUT PROOF STEMFIRE DURABLE CONSTRUCTIONANTISTATIC DEVICESTOPPER DEVICEISO 5211 MOUNTING PADFLANGED OR BUTTWELDING ENDSAVAILABLE WITH WG OPERATOR
5
L/L1(RF/BW)
L2(RTJ)
H
W
wt(kg) R F/RTJ
L/l1(RF/BW)
L2(RTJ)
H
W
wt(kg) R F/RTJ
NPS DN
250
11.50292
11.622957.1218014
3502619
12 /265
13.00330
13.123337.6219316
4003525
380
14.00356
14.123598.5021520
5005842
4100
17.00432
17.124359.5024120
5008151
6150
22.00559
22.12562
21.2554024
60014285
8200
26.00660
26.12664
25.0063524
600287200
10250
31.00787
31.12791
26.1266524
600540395
12300
33.00838
33.12841
31.1279024
600780610
14350
35.00889
35.12892
31.8881032
8001000805
16400
39.00991
39.12994
36.3892532
80013001010
18450
43.00109243.12109538.7598532
80017001350
20500
47.00119447.25120044.501130
32800
21001656
24600
55.00139755.38140746.621185
32800
34002775
26650
57.00144857.50146152.501335
32800
38003125
28700
61.00154961.50156257.001450
32800
45003790
inmm
inmm
inmm
inmm
inmm
BW
Dimensional datas of ANS I Class 600Lb
NPS DN
250
14.50368
14.623718.6221920
5003123
12 /265
16.50419
16.624229.2523520
5004331
380
15.00381
15.12384
10.2526020
5006851
4100
18.00457
18.12460
15.3839024
6009861
6150
24.00610
24.12613
25.7565524
600171102
8200
29.00737
29.12740
30.2577024
600345240
10250
33.00838
33.12841
31.7580524
600650480
12300
38.00965
38.12968
38.0096532
800940735
14350
40.50102940.88103838.5098032
8001205965
16400
44.50113011.88114045.001145
32800
15651215
18450
48.00121948.50123247.001195
32800
20501625
20500
52.00132152.50133453.501360
32800
25351995
24600
61.00154961.75156856.001425
32800
39503335
inmm
inmm
inmm
inmm
inmm
BW
Dimensional datas of ANS I Class 900Lb
20
21
L 1
19
1
2
3
4
56
7
8
9
10
11
12
13
14
15
16
17
18
19
L
NP
S
HM aterials of parts
No Part Name Carbon S teel AS TM M aterials18Cr- 9Ni- 2M o
Carbon S teel
123456789
101112131415161718192021
BodyBonnet
BallStemSeat
Seat InsertSeat Spring
Seat O- RingStem O- Ring
Bonnet GasketBonnet O- RingAntistatic Spring
Lower CoverBonnet Stud
Bonnet Stud NutTrunnion
Trunnion BearingGland Flange
Gland BoltStop Plate
Handle
A351- CF8MA351- CF8MA182- F316A276- 316
A182- F316Glass Filled PTFE
Inconel X- 750VitonViton 2)
Graphite+316Viton
A313- 316A182- F316
A193- B8A194- 8
A276- 316316+PTFE
A351- CF8MA193- B8
Carbon Steel+ZnCarbon Steel
A352- LCBA352- LCB
1)A182- F304A276- 304
A350- LF2+ENP
A313- 304VitonViton 2)Graphite+304Viton
A313- 304A182- F304
A320- L7A194- 4
A276- 304304+PTFEA352- LCBA193- B7
Carbon Steel
Note:1)A105+EN P optional 2)Sp iral wound construction.
A216- WCBA216- WCB
1)A182- F304A276- 304A105+ENP
A313- 304NPRNBR 2)
Graphite+304NBR
A313- 304A216- WCB
A193- B7A194- 2HA276- 304304+PTFE
A216- WCBA193- B7
Carbon Steel
Trunnion Mounted Ball Valve, Cast Steel 600Lb/900Lb
Applicable Standards:STEEL BALL VALVE ISO 14313FIRE SAFE, API 607
Design Details:STEEL BALL VALVES API 609/API 6D
ANTI STATIC, API 608STEEL VALVES, ASME B16.34FACE TO FACE, ASME B16.10END FLANGES, ASME B 16.5BUTTWELDING ENDS, ASME B 16.25INSPECTION AND TEST, API 598/API 6D
FULL PORT DESIGNBG BOLTED BONNET/SPLIT BODYFLOATING BALL TYPEBLOW-OUT PROOF STEMFIRE DURABLE CONSTRUCTIONANTISTATIC DEVICESTOPPER DEVICEISO 5211 MOUNTING PADFLANGED OR BUTTWELDING ENDSAVAILABLE WITH WG OPERATOR
6
Trunnion Mounted Ball Valve, Cast Steel,1500Lb/2500Lb
N P S D NL / L 1
(R F / B W )L 2
(R T J ) H W W T (k g) L / L 1(R F / B W )
L 2(R T J ) H W W T (k g)
212 /2
3468
10121416in
506580
100150200250300350400mm
14.5016.5018.5021.5027.7532.7539.0044.5049.5054.50
in
368419470546705832991
113012571384mm
14.6216.6218.6221.6228.0033.1239.3845.1220.2544.38
in
371422473549711841
1000114612761407mm
11.2512.0013.2520.0033.5039.3841.1249.3850.0058.50
in
285305338506852
10001045125512701485mm
20202424243232323232in
500500600600600800800800800800mm
4967
106153268540
1020147518852455
RF/RTJ
33447387
145345685
105013851735B W
17.7520.0022.7526.5036.0040.2550.0056.00
--in
451508578673914
102212701422
--
mm
17.8821.2523.0026.8836.5040.8850.8856.88
--in
454540584683927
103812921445
--
mm
12.0012.8814.2521.2535.8842.1244.0053.00
--in
304327362540911
107011201345
--
mm
2024242432323232--in
500600600600800800800800
--
mm
5576
120173302612
11501665
--
RF/RTJ
415591
110182430855
1315--
B W
AN SI Clas s1 500Lb AN SI Clas s2 500Lb
Dimensional datas
L 2
M aterials of partsNo Part Name Carbon S teel AS TM M aterials
18Cr- 9Ni- 2M oCarbon S teel
123456789
101112131415161718192021
BodyBonnet
BallStemSeat
Seat InsertSeat Spring
Seat O- RingStem O- Ring
Bonnet GasketBonnet O- RingAntistatic Spring
Lower CoverBonnet Stud
Bonnet Stud NutTrunnion
Trunnion BearingGland Flange
Gland BoltStop Plate
Handle
A351- CF8MA351- CF8MA182- F316A276- 316
A182- F316Glass Filled PTFE
Inconel X- 750VitonViton
2)Graphite+316Viton
A313- 316A182- F316
A193- B8A194- 8
A276- 316316+PTFE
A351- CF8MA193- B8
Carbon Steel+ZnCarbon Steel
A352- LCBA352- LCB
1)A182- F304A276- 304
A350- LF2+ENP
A313- 304VitonViton
2)Graphite+304Viton
A313- 304A182- F304
A320- L7A194- 4
A276- 304304+PTFEA352- LCBA193- B7
Carbon Steel
Note:1)A105+EN P optional 2)Sp iral wound construction.
1
2
3
4
56
7
8
9
10
11
12
13
14
15
16
17
18
19
L
NP
S
H
A216- WCBA216- WCB
1)A182- F304A276- 304A105+ENP
A313- 304NPRNBR
2)Graphite+304NBR
A313- 304A216- WCB
A193- B7A194- 2HA276- 304304+PTFE
A216- WCBA193- B7
Carbon Steel
20
21
L 1
19
Applicable Standards:STEEL BALL VALVE ISO 14313FIRE SAFE, API 607
Design Details:STEEL BALL VALVES API 609/API 6D
ANTI STATIC, API 608STEEL VALVES, ASME B16.34FACE TO FACE, ASME B16.10END FLANGES, ASME B 16.5BUTTWELDING ENDS, ASME B 16.25INSPECTION AND TEST, API 598/API 6D
FULL PORT DESIGNBG BOLTED BONNET/SPLIT BODYFLOATING BALL TYPEBLOW-OUT PROOF STEMFIRE DURABLE CONSTRUCTIONANTISTATIC DEVICESTOPPER DEVICEISO 5211 MOUNTING PADFLANGED OR BUTTWELDING ENDSAVAILABLE WITH WG OPERATOR
7
Trunnion Mounted Ball Valves, Forged Steel
LV GA E A STD TEFLON GRAPH ITEDOU- PACKING
S P L IT 3- P IE C E
R F R TJ BW
AS
FS
GR E AS E - JE T
FB R B
DBB
DOU-G ASKET
A
B
C
D
E
J
I
H
G
F
Vahn-Tech steel ball valves are designed to provide maximum service life and durability.All ball valves have full port design and are manufactured to the American Petroleum Institute Standards API 608 & API 6D, British Standards BS 5351 and also conform to the American Society of Mechanical Engineer’s Standard ASME B16.34.
Design MaterialsStandard body/bonnet materials include nine grades of carbon, low alloy and stainlesssteel. For special applications, they can be supplied in other grades of alloy and stainless steel. Trim, packing and gasket materials can be selected from a wide rangeto match service conditions.
Material of TrimEnd connectionsPacking and Gasket MaterialOperator MountingHandwheel Extensions
Pressure EqualizingAnti-Static or Fire Safe Design
Welded EndsOxygen & Chlorine Cleaning & Packaging
A Operation D B Grease-jet Joint E End Connections
F G AS I FS J Gasket
Extended lever for easy operationalso available with gear box, motoractuators, pneumatic or hydraulicactuators.
Installed in the respective
part according to the
with ecumenical situations
and realize seal in spot with
maintenance easily.
Body & BonnetC Split or 3-piece, split body &
bonnet for 12” and smaller
sizes. This enables easy
disassemble of components
for repair.
Bore Full bore or reduced bore.
Full bore design provides
Packing
combined with live loading, maintainspacking compression under high cycleand sever service applications. Graphitepacking is used for high temperaturesituations.
Anti-static - A metallic contact
is always granted between
ball and stem/body to discharge
eventual static build-ups during
service.
Fire safe designed to API 607
or BS 6755 to ensure operation
Secondary metal-to-metal
seal acts as backup if primary
ordered for compliance with
API 607 will be provided with
graphite packing and gaskets.
Standard gasket or double
gasket. Standard gasket
adopts high-performance
rubber seal ring. Double
gasket adopts high perfor-
mance rubber seal ring and
spiral wound graphite.
Standard packing vs. te on packing
H DBBDouble block and bleed.
The body cavity is isolated
when the ball is in either
fully closed or fully opened
position to avoid excess
pressure on the ow of
the medium.
A
11
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16
17
18
19
H
L
NP
S
L 1 L 2L 2
20
21
19
L(RF)
L1(BW)
H
W
wt(kg) R F
NPS DN
250
7.001788.502164.0012016
4002825
12 /2
657.501909.502416.0015016
4003528
380
8.00203
11.122837.0018024
6005549
41009.00229
12.003059.2523524
6008071
6150
15.50394
18.004579.8825024
600190182
8200
18.00457
20.50521
11.0028024
600290277
10250
21.00533
22.00559
12.6232032
800445553
12300
24.00610
25.00635
15.3839032
800570553
14350
27.00686
30.00762
16.5042032
800780747
16400
30.00762
33.00838
21.8855532
80015201481
18450
34.00864
36.00914
23.6260032
80023002266
20500
36.00914
39.00991
25.0063532
80025002460
24600
42.00106745.00114328.0071032
80039503904
26650
45.00114349.00124529.5075040
100048904939
28700
49.00124553.00134631.5080040
100063006362
30750
51.00129555.00139734.0086540
100071008149
32800
54.00137260.00152436.0091540
100089509000
36900
60.00152468.00172738.5098040
10001350013570
inmm
inmm
inmm
inmm
inmm
BW
Dimension ANS I Class 150Lbal datas of
M aterials of partsNo Part Name Carbon S teel AS TM M aterials
18Cr- 9Ni- 2M oCarbon S teel
123456789
101112131415161718192021
BodyBonnet
BallStemSeat
Seat InsertSeat Spring
Seat O- RingStem O- Ring
Bonnet GasketBonnet O- ring
Antistatic SpringLower CoverBonnet Stud
Bonnet Stud NutTrunnion
Trunnion BearingGland
Gland BoltStop Plate
Handle
A105A105
1)A182- F304A276- 304A105+ENP
A313- 304NBRNBR
2)Graphite+304NBR
A313- 304A182- F304
A193- B7A194- 2HA276- 304304+PTFE
A105A193- B7
Carbon Steel
A182- F316A182- F316A182- F316A276- 316
A182- F316Glass Filled PTFE
Inconel X- 750VitonViton
2)Graphite+316Viton
A313- 316A182- F316
A193- B8A194- 8
A276- 316316+PTFE
A182- F316A193- B8
Carbon Steel+ZnCarbon Steel
A350- LF2A350- LF2
1)A182- F304A276- 304
A350- LF2+ENP
A313- 304VitonViton
2)Graphite+304Viton
A313- 304A182- F304
A320- L7A194- 4
A276- 304304+PTFEA350- LF2A193- B7
Carbon Steel
Note:1)A105+EN P optional 2)Sp iral wound construction.
L(RF)
L1(BW)
H
W
wt(kg) R F
NPS DN
250
8.502168.502164.0012016
4003024
12 /2
659.502419.502416.0015016
4004031
380
11.12283
11.122837.0018024
6006049
4100
12.00305
12.003059.2523524
6009072
6150
15.88403
18.004039.8825024
600200169
8200
19.75502
20.50521
11.0028024
600325280
10250
22.38568
22.00559
12.6232032
800490424
12300
25.50648
25.00635
15.3839032
800690598
14350
30.00762
30.00762
16.5042032
800900872
16400
33.00838
33.00838
21.8855532
80018101665
18450
36.00914
36.00914
23.6260032
80026202440
20500
39.00991
39.00991
25.0063532
80028602635
24600
45.00114345.00114328.0071032
80044304075
26650
49.00124549.00124529.5075040
100054304880
28700
53.00134653.00134631.5080040
100068106225
30750
55.00139755.00139734.0086540
100076557115
32800
60.00152460.00152436.0091540
100095909230
36900
----------
inmm
inmm
inmm
inmm
inmm
BW
Dimension ANS I Class 300Lbal datas of
Trunnion Mounted Ball Valve, Forged Steel, 150Lb/300Lb
Applicable Standards:STEEL BALL VALVE ISO 14313FIRE SAFE, API 607
Design Details:STEEL BALL VALVES API 609/API 6D
ANTI STATIC, API 608STEEL VALVES, ASME B16.34FACE TO FACE, ASME B16.10END FLANGES, ASME B 16.5BUTTWELDING ENDS, ASME B 16.25INSPECTION AND TEST, API 598/API 6D
FULL PORT DESIGNBG BOLTED BONNET/SPLIT BODYFLOATING BALL TYPEBLOW-OUT PROOF STEMFIRE DURABLE CONSTRUCTIONANTISTATIC DEVICESTOPPER DEVICEISO 5211 MOUNTING PADFLANGED OR BUTTWELDING ENDSAVAILABLE WITH WG OPERATOR
12
L/L1(RF/BW)
L2(RTJ)
H
W
wt(kg) RF/RTJ
L/L1(RF/BW)
L2(RTJ)
H
W
wt(kg) R F
NPS DN
250
14.50368
14.623716.7217024
6004537
12 /2
6516.50419
16.624227.5019024
6006553
380
15.00381
15.123848.2521024
6007356
4100
18.00457
18.12460
11.3829032
80013598
6150
24.00610
24.12613
12.6232032
800360291
8200
29.00737
29.12740
15.3839032
800650545
10250
33.00965
38.12968
18.5047032
80013501145
12300
38.00965
38.12968
18.5047032
50013501145
14350
40.50102940.88103820.8853032
80018901650
16400
44.50113044.88114024.0061040
100031002750
18450
48.00121948.50123226.0066040
100043003875
20500
52.00132152.50133427.5070040
100049504410
24600
61.00154961.75156830.7578040
100071006485
inmm
inmm
inmm
inmm
inmm
BW
Dimension ANS I Class 600Lbal datas ofNPS DN
250
11.50292
11.622956.5016516
4003427
12 /2
6513.00330
13.123337.0018024
6005343
380
14.00356
14.123597.8820024
6006549
4100
17.00432
17.12435
11.0028024
60012595
6150
22.00559
22.12562
12.2531032
800245188
8200
26.00660
26.12664
14.0035532
800505418
10250
31.00787
31.12791
16.1241032
800640495
12300
33.00838
33.12841
18.0045532
800910740
14350
35.00889
35.12892
19.2549032
80013801185
16400
39.00991
39.12994
21.0053532
80022501960
18450
43.00109243.12109524.8863040
100034003050
20500
47.00119447.25120025.6265040
100038503406
24600
55.00139755.38140730.1276540
100049004275
26650
57.00144857.50146131.8881040
100067006025
28700
61.00154961.50156234.6288040
100083007590
inmm
inmm
inmm
inmm
inmm
BW
Dimension ANS I Class 900Lbal datas of
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16
17
18
19
H
L
NP
S
L 1 L 2L 2
20
21
19
M aterials of partsNo Part Name Carbon S teel AS TM M aterials
18Cr- 9Ni- 2M oCarbon S teel
123456789
101112131415161718192021
BodyBonnet
BallStemSeat
Seat InsertSeat Spring
Seat O- RingStem O- Ring
Bonnet GasketBonnet O- ring
Antistatic SpringLower CoverBonnet Stud
Bonnet Stud NutTrunnion
Trunnion BearingGland
Gland BoltStop Plate
Handle
A105A105
1)A182- F304A276- 304A105+ENP
A313- 304NBRNBR
2)Graphite+304NBR
A313- 304A182- F304
A193- B7A194- 2HA276- 304304+PTFE
A105A193- B7
Carbon Steel
A182- F316A182- F316A182- F316A276- 316
A182- F316Glass Filled PTFE
Inconel X- 750VitonViton
2)Graphite+316Viton
A313- 316A182- F316
A193- B8A194- 8
A276- 316316+PTFE
A182- F316A193- B8
Carbon Steel+ZnCarbon Steel
A350- LF2A350- LF2
1)A182- F304A276- 304
A350- LF2+ENP
A313- 304VitonViton
2)Graphite+304Viton
A313- 304A182- F304
A320- L7A194- 4
A276- 304304+PTFEA350- LF2A193- B7
Carbon Steel
Note:1)A105+EN P optional 2)Sp iral wound construction.
Trunnion Mounted Ball Valve, Forged Steel, 600Lb/900Lb
Applicable Standards:STEEL BALL VALVE ISO 14313FIRE SAFE, API 607
Design Details:STEEL BALL VALVES API 609/API 6D
ANTI STATIC, API 608STEEL VALVES, ASME B16.34FACE TO FACE, ASME B16.10END FLANGES, ASME B 16.5BUTTWELDING ENDS, ASME B 16.25INSPECTION AND TEST, API 598/API 6D
FULL PORT DESIGNBG BOLTED BONNET/SPLIT BODYFLOATING BALL TYPEBLOW-OUT PROOF STEMFIRE DURABLE CONSTRUCTIONANTISTATIC DEVICESTOPPER DEVICEISO 5211 MOUNTING PADFLANGED OR BUTTWELDING ENDSAVAILABLE WITH WG OPERATOR
13
Dimensional datasN P S D N
L / L 1(R F / B W )
L 2(R T J ) H W W T (k g) L / L 1
(R F / B W )L 2
(R T J ) H W W T (k g)
212 /2
3468
10121416in
506580
100150200250300350400mm
14.5016.5018.5021.5027.7532.7539.0044.5049.5054.50
in
368419470546705832991
113012571384mm
14.6216.6218.6221.6228.0033.1239.3845.1250.2555.38
in
371422473549711841
1000114612761407mm
6.757.505.25
11.3813.0015.7517.3822.0025.2527.12
in
170190210290330400440560640690mm
24243232323232404040in
600600800800800800800
100010001000mm
557595
150540880
1360198031004650
RF/RTJ
405565
115420685
1025155526003930
bw
17.7520.0022.7526.5036.0040.2550.0056.00
--in
451508578673914
102212701422
--
mm
17.8821.2523.0026.8836.5040.8850.8856.88
--in
454540584683927
103812921445
--
mm
7.509.00
11.0014.1215.7518.8820.5026.38
--in
190230280360400480520670
--
mm
2432323232404040--in
600800800800800
100010001000
--
mm
6895
120185675
110016502300
--
RF/RTJ
577491
122555918
13551950
--
B W
AN SI Clas s1 500Lb AN SI Clas s2 500Lb
L 1 L 2L 2
M aterials of partsNo Part Name Carbon S teel AS TM M aterials
18Cr- 9Ni- 2M oCarbon S teel
123456789
101112131415161718192021
BodyBonnet
BallStemSeat
Seat InsertSeat Spring
Seat O- RingStem O- Ring
Bonnet GasketBonnet O- ring
Antistatic SpringLower CoverBonnet Stud
Bonnet Stud NutTrunnion
Trunnion BearingGland
Gland BoltStop Plate
Handle
A105A105
1)A182- F304A276- 304A105+ENP
A313- 304NBRNBR
2)Graphite+304NBR
A313- 304A182- F304
A193- B7A194- 2HA276- 304304+PTFE
A105A193- B7
Carbon Steel
A182- F316A182- F316A182- F316A276- 316
A182- F316Glass Filled PTFE
Inconel X- 750VitonViton
2)Graphite+316Viton
A313- 316A182- F316
A193- B8A194- 8
A276- 316316+PTFE
A182- F316A193- B8
Carbon Steel+ZnCarbon Steel
A350- LF2A350- LF2
1)A182- F304A276- 304
A350- LF2+ENP
A313- 304VitonViton
2)Graphite+304Viton
A313- 304A182- F304
A320- L7A194- 4
A276- 304304+PTFEA350- LF2A193- B7
Carbon Steel
Note:1)A105+EN P optional 2)Sp iral wound construction.
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16
17
18
19
H
L
NP
S
20
21
19
Trunnion Mounted Ball Valve, Forged Steel, 1500Lb/2500Lb
Applicable Standards:STEEL BALL VALVE ISO 14313FIRE SAFE, API 607
Design Details:STEEL BALL VALVES API 609/API 6D
ANTI STATIC, API 608STEEL VALVES, ASME B16.34FACE TO FACE, ASME B16.10END FLANGES, ASME B 16.5BUTTWELDING ENDS, ASME B 16.25INSPECTION AND TEST, API 598/API 6D
FULL PORT DESIGNBG BOLTED BONNET/SPLIT BODYFLOATING BALL TYPEBLOW-OUT PROOF STEMFIRE DURABLE CONSTRUCTIONANTISTATIC DEVICESTOPPER DEVICEISO 5211 MOUNTING PADFLANGED OR BUTTWELDING ENDSAVAILABLE WITH WG OPERATOR
14
20
19
18
17
12
13
6
16
7
14
8
22 6 9 4 15 1 3 10 11 21 5 2
WCB/LC B/CF8M /CF8/C F3M/CF 3/WC6/ WC9/CD 3MN
WCB/LC B/CF8M /CF8/C F3M/CF 3/WC6/ WC9/CD 3MN
A105+E NP/LF2 +ENP/F 304/F3 16/F30 4L/F31 6L/F51
A105+E NP/LF2 +ENP/F 304/F3 16/F30 4L/F31 6L/F51
A105+E NP/LF2 +ENP/F 304/F3 16/F30 4L/F31 6L/F51
PTFE/M YLON/P EEK/TEF LON
VITON/ NBR
B7M/B8 M/L7M/B16M
A105+E NP/LF2 +ENP/F 304/F3 16/F30 4L/F31 6L/F51
17-4PH /17-7P H/Inco nel
304+PT FE/316 +PTFE
Flexib le graphi te+PTF E
Manufacturing Standards:
Body
Lid
Ball
Seat
Stem
Seat ring
O- ring
Bolt
Support cover
Spring
Bearing
Gasket
Materials could be choose d ac cording to customers' requirement & working conditions.
M aterials of parts
Features and Application:
Top Entry Combination Ball Valve
N o
1
2
3
4
5
6
7
8
9
10
11
Pa rt Na me
Body
Lid
Ball
Seat
Sealing ring
O- ring
Stem
Seat grease injection valve
Spring
Blow- down valve
Ball lubrieating bearing
N o
12
13
14
15
16
17
18
19
20
21
22
Screw
Body gasket
Support cover
Seat retainer ring
Spring support cover
Packing
C onnected disk
Elastic cylindrical pin
Flat key
Stem gasket
Antistatic spring
Pa rt Na me
Design & Manufacture: API 6D/ISO 14313, ASME B16.34End Connections: ASME B16.5, DN EN 1092Fire Resistance: API 607/ ISO 10497Inspection & Testing: API 6D, ISO 5208, API 598Material: ISO 15156
The top entry combination ball valve is a new product in which the seat can be installed and move around the body. Through the thread, the outer marginof the seat is connected to the retainer ring. The spring on the support cover is installed on the valve body which is compressed by the retainer ring. The fabrication holes are on the outer margin of the seat and retainer ring. This new design reduces the possibility of leakages, increases vibration resistance andsafety of the valve. The ball is installed from the top, which enables easier maintenance without removing the pipe.
15
234
NPSinch
A B H1 W WT TDN
5080
100150200250300
mm mm mm mm kg N.mA N S I C la s s 1 50L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
292356432559660787838
5176
100150201252303
207223280275321355470
300400450460460600600
3057
100215407560710
5065
151320
102010851562
14 889991
10921194139715491651
334385436487589684735
455460503560610730800
600600600700700700760
760110015121930320046005630
24263016457460169750
1454018005
23468
1012
NPSinch
A B H1 W WT TDN
5080
100150200250300
mm mm mm mm kg N.mA N S I C la s s 3 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
292356432559660787838
5176
100150201252303
211226286282325360420
300500550460460600600
3663
106221412566715
86110270500
162018242632
161820242830
14 889991
10921194139715491651
334385436487589684735
460480508565617678738
766110615192010320846075638
380053768000
10610172802510231664
600600600600760760760
W
ABW RJ
H1
B
A
H1
B
Φ W
Top Entry Combination Ball Valve 150Lb/300Lb
Note: Turbine drives
Manufacturing Standards:
350400450500600700750
350400450500600700750
161820242830
68
1012
Design & Manufacture: API 6D/ISO 14313, ASME B16.34End Connections: ASME B16.5, DN EN 1092Fire Resistance: API 607/ ISO 10497Inspection & Testing: API 6D, ISO 5208, API 598Material: ISO 15156
16
23468
1012
NPSinch
A B H1 W WT TDN
5080
100150200250300
mm mm mm mm kg N.mA N S I C la s s 6 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
292356432559660787838
5176
100150201252303
215232294287324365480
500600600600600600700
4167
110226417570720
148200460908
256030484300
161820242830
14 889991
10921194139715491651
334385436487589684735
465470512570622742817
700700760760760760850
770111215231940321346125640
72559174
1352018034295124226458864
23468
10
NPSinch
A B H1 W WT TDN
5080
100150200250
mm mm mm mm kg N.mA N S I C la s s 9 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
368381457610737838
4974
100150201252
212227277283334380
650700800600600600
52110200430800
1000
208280650
129835964306
1416182024
12 96510291130121913211549
303322373423471589
507520538580625690
130016952560340044007200
60001022012968190542545238655
700700760760760850
23468
NPSinch
A B H1 W WT TDN
5080
100150200
mm mm mm mm kg N.mA N S I C la s s 1 500L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
368470546705832
4974
100144192
212236295303354
600930460600600
56153278600
1100
330440
103420845496
1012141618
9911130125713841477
239287315360405
398520560570592
14382017261238905100
672014520326004965066350
700700760760760
W
ABW RJ
H1
B
A
H1
B
Φ W
Note: Turbine drives
Top Entry Combination Ball Valve, 600Lb/900Lb/1500Lb
350400450500600700750
300350400450500600
250300350400450
Manufacturing Standards:Design & Manufacture: API 6D/ISO 14313, ASME B16.34End Connections: ASME B16.5, DN EN 1092Fire Resistance: API 607/ ISO 10497Inspection & Testing: API 6D, ISO 5208, API 598Material: ISO 15156
17
20
7
18
19
17
15
13
14
10
6
8 9 6 4 2 1 3 11 12 16 5 21 21
A1 05/LF2 /F304/F3 16/F304L /F316L /F11/F22/F51
A1 05+E NP /LF2 +E NP /F304/F3 16/F304L /F316L /F51
A1 05+E NP /LF2 +E NP /F304/F3 16/F304L /F316L /F51
A1 05+E NP /LF2 +E NP /F304/F3 16/F304L /F316L /F51
PT FE /NYL ON /PEE K/TE FL ON
VI TO N/NB R
B7 M/B8 M/L7 M/B1 6M
A1 05+E NP /LF2 +E NP /F304/F3 16/F304L /F316L /F51
A1 05+E NP /LF2 +E NP /F304/F3 16/F304L /F316L /F51
17-4 PH /17- 7P H/Inco nel
304+ PT FE /316+P TF E
Flex ible grap hite+3 04/PTF E
Body
Ball
S eat
S tem
S ealing ring
O- ring
S crew
S upport cover
Die holder
S pring
Bearing
G asket
M aterials of parts
Materials could be choosed according to customers' requirement & working condition.
G round extended product structure diagram
123456789
1011
1213141516171819202122
No Part NameBodyLeft- right bodyBallSeatSealin g ringO-rin gStemSeat greas e injection valveSprin gstrai ght pinBlow- down valve
Ball lubricating bearin gScrewBonnet gasketSuppo rt coverDie holderPackingTermin al padSprin g pinFlat keyStem gasketStatic-fre e sprin g
No Part Name
Full Welded Trunnion Mounted Ball Valve
M aterials of parts
Manufacturing Standards:Design & Manufacture: API 6D/ISO 14313, ASME B16.34End Connections: ASME B16.5, DN EN 1092Fire Resistance: API 607/ ISO 10497Inspection & Testing: API 6D, ISO 5208, API 598Material: ISO 15156
18
23468
1012
NPSinch
A B H1 W WT TDN
5080
100150200250300
mm mm mm mm kg N.mA N S I C la s s 1 50L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
216283305457521559635
5176
100150201252303
146170204260300340385
300400450460460600600
122842
125220340520
5065
151320
102010851562
161820242830
14 762838914991
114313461397
334385436487589684735
410460520560600730840
600600600700700700760
860980
12101760201032004120
24263016457460169750
1454018005
23468
1012
NPSinch
A B H1 W WT TDN
5080
100150200250300
mm mm mm mm kg N.mA N S I C la s s 3 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
216283305457521559635
5176
100150201252303
170185210260310345390
300500550460460600600
163560
150250350580
86110270500
162018242632
762838914991
114313461397
334385436487589684735
420470530590600750850
600600600600760760760
980121015202010252036004620
380053768000
10610172802501231664
W
H1
B
A
B
A
H1
ΦW
Note: Turbine drives
Full Welded Trunnion Mounted Ball Valve 150Lb/300Lb
350400450500600700750
350400450500600700750
Manufacturing Standards:Design & Manufacture: API 6D/ISO 14313, ASME B16.34End Connections: ASME B16.5, DN EN 1092Fire Resistance: API 607/ ISO 10497Inspection & Testing: API 6D, ISO 5208, API 598Material: ISO 15156
19
161820242830
14
23468
1012
NPSinch
A B H1 W WT TDN
5080
100150200250300
mm mm mm mm kg N.mA N S I C la s s 6 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
292356432559660787838
5176
100150201252303
185190220270320350400
500600600600600600700
274895
210405655915
148200460908
256030484300
161820242830
14 889991
10921194139715491651
334385436487589684735
450500560620750880960
700700760760760760850
1228170523802875483059007200
72559174
1352018034295124226458864
23468
10
NPSinch
A B H1 W WT TDN
5080
100150200250
mm mm mm mm kg N.mA N S I C la s s 9 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
368381457610737838
4974
100150201252
180208222270325360
650700800600600600
4070
110255525810
208280650
129835964306
1416182024
12 96510291130121913211549
303322373423471589
450550650750830950
700700760760760850
127015152420274033254800
60001022012968190542545238655
2346
NPSinch
A B H1 W WT TDN
5080
100150
mm mm mm mm kg N.mA N S I C la s s 1 500L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
368470546705
4974
100144
175232395300
600930460600
50115170402
330440
10342084
101214
8 832991
11301257
192239287315
360410500560
600700700760
580112014922140
54966720
1452032600
W
H1
B
A
B
A
H1
ΦW
Note: Turbine drives
Full Welded Trunnion Mounted Ball Valve 600Lb/900Lb/1500Lb
350400450500600700750
300350400450500600
200250300350
Manufacturing Standards:Design & Manufacture: API 6D/ISO 14313, ASME B16.34End Connections: ASME B16.5, DN EN 1092Fire Resistance: API 607/ ISO 10497Inspection & Testing: API 6D, ISO 5208, API 598Material: ISO 15156
20
12
15
16
10
13
7
14 9 6 5 4 11 8 14 10 1 3 2
BodyLeft- right bodyBallSeatGraphite sealing ringPressure ringStemLower lid
No Part Name No Part NameSpringSeat washerScrewPacking bushingPackingBushingNutStud
12345678
910111213141516
Characteristics:1. Suitable for harsh working conditions such as high temperatures, corrosive media, etc. 2 .The tungsten-chromium alloy solid stainless steel seat is rmed by the spring. This design improves seal performance, has a long service life, is 3 .Stable torque is user friendly and cost e cient.
4 .High quality sealing performance depends on a high level of processing technology. This enables the ball to have close contact with the seat.5. Torque can open and close easily in a wide temperature range.
6. °c (932°F).
7. The surface-hardening treatment allows the valve to be used for mediums such as cement, paper pulp and well as corrosive applications. The xedball has a unique design that makes the valve suitable for media containing dust.
WC B/A105/CF 8M/F316/CF 8/F304/CF 3MF316L/CF 3/F304L/CD 3MN/F51WC B/A105/CF 8M/F316/CF 8/F304/CF 3MF316L/CF 3/F304L/CD 3MN/F51(F304/F316/F304L/F316L/F51)+Io nitriding/Hard Ch romium/Nialloy surfacing(F304/F316/F304L/F316L/F51)+St elliteF6a/A105+EN P/F304/F316/F304L /F316L /F51Flexible gra phiteA105+EN P/F316/F304/F316L /F304L /F51B7 M/B8MB7 M/B8MFlexible gra phite17-4 PH/Inconel se ries(304/316)+Io n nitriding304+Flexible gra phite
BallSeatStemSealing ringLowe r lidBoltNutPackingSpringBushingSeal gasket
Body
Bonnet
Materials could be choose d ac cording to customers' requirement & working condition.
M aterials of parts
Hard Seal Ball Valve
Manufacturing Standards:Design & Manufacture: API 6D/ISO 14313, ASME B16.34End Connections: ASME B16.5, DN EN 1092Fire Resistance: API 607/ ISO 10497Inspection & Testing: API 6D, ISO 5208, API 598Material: ISO 15156
maintenance-free and can be applied to a wide range of operating conditions.
Valve can be used for temperatures up to 500
21
Thrust Be aring
Stem
Bo dy
BodySpring
Seat ring
Seat
BallPressure ring
212 /23468
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 1 50L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
178191203229394457
516576
100150201
172184196225290320
350400500650460600
16263551
103170
7292
123240640
1082
533610686762864914
252303334385436487
350380415450490540
600600600700700700
280460580790930
1288
143721523234379745746875
1214161820
10
212 /23468
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 3 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
216241283305403502
516576
100150201
172184196225295325
350400500650600600
22344592
180246
119149255402680
1620
568648762838914991
252303334385436487
356388425466502550
600600700700700760
310512612
101011831353
21702985403064249963
13213
10
Fixed Structure Series
B W R J
B
H1
ΦW
A
H1
W
The ball valve can maintain astable working temperaturerange of -29 C ~ 500 C due tothe co-operation of the seat ring and body.
Flexible graphite is ofhigh-temperature andfire resistant.
exible graphite is of high-t emperature and
re resistance function.
The stem is designed to preventblow-out should the packing become loose during operation.
StemBu shing
Bo dyPa ck ing
Manual operated
Fixed Structure, 150Lb/300Lb
250300350400450500
250300350400450500
506580
100150200
506580
100150200
Note: Worm-gear actuator.
23
1214161820
23468
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 6 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
292356432559660
5176
100150201
185205235300350
500600600600600
305684
230350
148200460908
2560
787838889991
1092
252303334385436
362398435478522
700700700760760
600830
114015302120
402155679695
1210319031
12141618
10
2346
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 9 00L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
368381457610
4974
100150
190208238312
650700600600
4578
120255
296342
12302319
737838965
1029
201252303322
340372420465
600700700760
520810
10501386
53517683
1317818383
101214
8
234
NPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
A N S I C la s s 1 500L b
Dimensional datasNPSinch
A B H1 W WT TDN mm mm mm mm kg N.m
368470546
4974
100
190210240
650750600
45116170
50710801981
705832991
144192239
315350388
600600700
430630
1188
38149380
144668
10
6
Fixed Structure Series
B W R J
B
H1
ΦW
A
H1
W
StemBu shing
Bo dyPa ck ing
Thrust Be aring
Stem
Bo dy
Bo dySp ring
Se at ring
Se at
Ba ll
Manual operated
Pres sure ring
Fixed Structure, 600Lb/900Lb/1500Lb
250300350400450
200250300350
150200250
5080
100150200
5080
100150
5080
100
Note: Worm-gear actuator.
24
The ball valve can maintain astable working temperaturerange of -29 C ~ 500 C due tothe co-operation of the seat ring and body.
Flexible graphite is ofhigh-temperature and
The stem is designed to preventblow-out should the packing become loose during operation.
VAHN-TECH INTERNATIONAL INC.2906-15 Fort York Blvd; Toronto, ON M5V 3Y4, CANADATel/Fax: +1 416 342 0001Email: info@vahn-tech.com
VAHN-TECH INTERNATIONAL INC.68 Netley Road, Barking Side,
ILFORD, ESSEX IG 2 7 NP, LondonUnited Kingdom
Tel: +44 208 554 1163/+44 (795) 649 3190Email: info@vahn-tech.com
!!!"#$%&'()*%"*+,
top related