FLIRA655sc15° - Warmtebeeldcamera.be€¦ · USB,imagestreaming 16-bit640×480pixels@25Hz • Signallinear • Temperaturelinear • Radiometric USB,protocols TCP,UDP,SNTP,RTSP,RTP,HTTP,ICMP,IGMP,
Post on 03-May-2018
227 Views
Preview:
Transcript
FLIR A655sc 15°
General description
The FLIR A655sc is an excellent choice for those working in R&D but don't need the highest framerates but do require 640 × 480 pixel resolution. When using the camera in R&D, it is highlyrecommended to use the FLIR ResearchIR software from FLIR Systems.
The camera is equipped with a 15° lens.
Key features:
• Affordable.• 16-bit 640 × 480 pixel images at 25 Hz.• Start-and-stop recording in FLIR ResearchIR using digital input.• Windowing mode: 640 × 240 pixels at 100 Hz or 640 × 120 pixels at 200 Hz.
Typical applications:
• Mid- or high-end industrial R&D.
Imaging and optical data
IR resolution 640 × 480 pixels
Thermal sensitivity/NETD < 0.03°C @ +30°C (+86°F) / 30 mK
Field of view (FOV) 15° × 11° (19° diagonal)
Minimum focus distance 0.50 m (1.64 ft.)
Focal length 41.3 mm (1.63 in.)
Spatial resolution (IFOV) 0.41 mrad
Lens identification Automatic
F-number 1.0
Image frequency 50 Hz (100/200 Hz with windowing)
Focus Automatic or manual (built in motor)
Detector data
Detector type Focal plane array (FPA), uncooledmicrobolometer
Spectral range 7.5–14 µm
Detector pitch 17 µm
Detector time constant Typical 8 ms
Measurement
Object temperature range • –40°C to +150°C (–40°F to +302°F)• 100 to +650°C (+212 to +1202°F)
Accuracy ±2°C (±3.6°F) or ±2% of reading
P/N: 55001-0301Copyright© 2015, FLIR Systems, Inc.All rights reserved worldwide. Names and marksappearing herein are either registered trademarksor trademarks of FLIR Systems and/or itssubsidiaries. All other trademarks, trade names orcompany names referenced herein are used foridentification only and are the property of theirrespective owners.Document identityPubl. No.: 55001-0301Release:Commit: 26732Language: en-USModified: 2015-06-12Formatted: 2015-06-13Corporate HeadquartersFLIR Systems, Inc.27700 SW Parkway Ave.Wilsonville, OR 97070USATelephone: +1-503-498-3547Websitehttp://www.flir.comCustomer supporthttp://support.flir.comDisclaimerSpecifications subject to change without furthernotice. Camera models and accessories subjectto regional market considerations. Licenseprocedures may apply. Products described hereinmay be subject to US Export Regulations. Pleaserefer to exportquestions@flir.com with anyquestions.
1 (15) www.flir.com
FLIR A655sc 15°
P/N: 55001-0301© 2015, FLIR Systems, Inc.#55001-0301; r. /26732; en-US
Measurement analysis
Atmospheric transmission correction Automatic, based on inputs for distance,atmospheric temperature and relative humidity
Optics transmission correction Automatic, based on signals from internalsensors
Emissivity correction Variable from 0.01 to 1.0
Reflected apparent temperature correction Automatic, based on input of reflectedtemperature
External optics/windows correction Automatic, based on input of optics/windowtransmission and temperature
Measurement corrections Global object parameters
USB
USB • Control and image
USB, standard USB 2 HS
USB, connector type • USB Mini-B
USB, communication TCP/IP socket-based FLIR proprietary
USB, image streaming 16-bit 640 × 480 pixels @ 25 Hz• Signal linear• Temperature linear• Radiometric
USB, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),uPnP
Ethernet
Ethernet Control and image
Ethernet, type Gigabit Ethernet
Ethernet, standard IEEE 802.3
Ethernet, connector type RJ-45
Ethernet, communication TCP/IP socket-based FLIR proprietary andGenICam protocol
Ethernet, image streaming 16-bit 640 × 480 pixels @ 50 Hz
16-bit 640 × 240 pixels @ 100 Hz
16-bit 640 × 120 pixels @ 200 Hz
• Signal linear• Temperature linear• Radiometric
GigE Vision and GenICam compatible
Ethernet, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),uPnP
Digital input/output
Digital input, purpose Image tag (start, stop, general), Image flowcontrol, (stream on/off), Input ext. device(programmatically read)
Digital input 2 opto-isolated, 0–1.5 V = low, 3–25 V = high
Digital output, purpose Output to ext. device (programmatically set)
Digital output 2 opto-isolated, ON = supply (max. 100 mA), OFF= open
Digital I/O, isolation voltage 500 VRMS
2 (15) www.flir.com
FLIR A655sc 15°
P/N: 55001-0301© 2015, FLIR Systems, Inc.#55001-0301; r. /26732; en-US
Digital input/output
Digital I/O, supply voltage 6–24 VDC, max. 200 mA
Digital I/O, connector type 6-pole jackable screw terminal
Power system
External power operation 12/24 VDC, 24 W absolute max.
External power, connector type 2-pole jackable screw terminal
Voltage Allowed range 10–30 VDC
Environmental data
Operating temperature range –15°C to +50°C (+5°F to +122°F)
Storage temperature range –40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F)
EMC • EN 61000-6-2:2001 (Immunity)• EN 61000-6-3:2001 (Emission)• FCC 47 CFR Part 15 Class B (Emission)
Encapsulation IP 30 (IEC 60529)
Shock 25 g (IEC 60068-2-27)
Vibration 2 g (IEC 60068-2-6)
Physical data
Weight 0.92 kg (2.03 lb.)
Camera size (L × W × H) 222× 73 × 75 mm (8.7 × 2.9 × 3.0 in.)
Camera size, excl. lens (L × W × H) 203× 73 × 75 mm (8.0 × 2.9 × 3.0 in.)
Tripod mounting UNC ¼"-20 (on three sides)
Base mounting 2 × M4 thread mounting holes (on three sides)
Housing material Aluminum
Comments to physical data Outline dimensional drawings and STEP files canbe found at http://support.flir.com
Shipping information
Packaging, type Cardboard box
List of contents • Infrared camera with lens• Ethernet cable• FLIR ResearchIR Max 4 (licence only)• FLIR Tools download card• Hard transport case• Mains cable• Power cable, pig-tailed• Power supply• Printed documentation• USB cable• User documentation CD-ROM
Packaging, weight
Packaging, size 360 × 180 × 550 mm (14.2 × 7.1 × 21.7 in.)
EAN-13 7332558003305
UPC-12 845188002787
Country of origin Sweden
Supplies & accessories:
• T197914; IR lens, f=41.3 mm (15°) with case
3 (15) www.flir.com
FLIR A655sc 15°
P/N: 55001-0301© 2015, FLIR Systems, Inc.#55001-0301; r. /26732; en-US
• T197922; IR lens, f=24.6 mm (25°) with case• T197915; IR lens, f=13.1 mm (45°) with case• T198065; IR lens, f=6.5 mm (80°) with case• T198165; IR lens, f=88.9 mm (7°) with case and support for A6xx/A6xxsc• T197896; High temperature option +300°C to 2000°C (+572°F to 3632°F)• 1910400; Power cord EU• 1910401; Power cord US• 1910402; Power cord UK• T910922; Power supply, incl. multi plugs, for A3xx, A3xxsc, A6xx and A6xxsc• T911182; Power supply for A3xx f, IP66• 1910423; USB cable Std A <-> Mini-B• T951004ACC; Ethernet cable CAT-6, 2m/6.6 ft.• 1910586ACC; Power cable, pigtailed• T197871ACC; Hard transport case for A3xx/A6xx series• T197870ACC; Cardboard box for A3xx/A6xx series• T126889ACC; Filter holder for A6xx lenses• T198584; FLIR Tools• T198583; FLIR Tools+ (license only)• DSW-10000; FLIR IR Camera Player• T198697; FLIR ResearchIR Max + HSDR 4• T199014; FLIR ResearchIR Max + HSDR 4• T199044; FLIR ResearchIR Max + HSDR 4 Upgrade• T198696; FLIR ResearchIR Max 4• T199013; FLIR ResearchIR Max 4• T199043; FLIR ResearchIR Max 4 Upgrade• T198731; FLIR ResearchIR Standard 4• T199012; FLIR ResearchIR Standard 4• T199042; FLIR ResearchIR Standard 4 Upgrade• T198567; ThermoVision™ System Developers Kit Ver. 2.6• T198566; ThermoVision™ LabVIEW® Digital Toolkit Ver. 3.3
4 (15) www.flir.com
12mm±0,1 (3x)0,47in±0,004
24mm±0,1 (3x)0,94in±0,004
59m
m±1
2,32
in±0
,04
203m
m±1
7,97
in±0
,04
67mm0+0,1
2,64in0,000+0,004
36,9mm1,45in
73m
m±0
,12,
87in
±0,0
04
36,5
mm
1,44
in
36,9mm±0,11,45in±0,004
74,5mm±0,12,93in±0,004
UN
C 1
/4-2
0 0,
75xD
Hel
icoi
l (3x
)
M4
1xD
Hel
icoi
l (6x
)
1,32
in33
,5m
m
1i
n25
,5m
m
FPA
act
ive
area
at
focu
s fa
r (in
finity
)
Cam
era
hous
ing
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
1(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
11
,67i
n ±0
,04
296,
5mm
±1
2,
32in
±0,
0459
mm
±1
6,
02in
±0,
0415
2,9m
m ±
1
4,
5in
114,
4mm
4,
78in
121,
4mm
6,
03in
153,
1mm
Cam
era
with
Len
s IR
f=6,
5 m
m (8
0°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
2(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
81m
m±1
3,19
in±0
,04
224,
5mm
±18,
84in
±0,0
4
67mm±0,12,64in±0,004
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
49,3
mm
1,94
in
42,3
mm
1,66
in
81m
m3,
19in
Cam
era
with
Len
s IR
f=13
,1 m
m (4
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
3(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
72,5
mm
±12,
85in
±0,0
4
67mm±0,12,64in±0,004
216m
m±1
8,5i
n±0
,04
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
40,8
mm
1,6i
n
33,8
mm
1,33
in
72,5
mm
2,85
in
Cam
era
with
Len
s IR
f=24
,6 m
m (2
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
4(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
78,2
mm
±13,
08in
±0,0
4
67mm±0,12,64in±0,004
221,
8mm
±18,
73in
±0,0
4
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
46,5
mm
1,83
in
39,5
mm
1,56
in
78,2
mm
3,08
in
Cam
era
with
Len
s IR
f=41
,3 m
m (1
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
5(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,56in ±0,0164,9mm ±0,2
2,
76in
70m
m
2,
32in
±0,
0459
mm
±1
5i
n ±0
,04
127,
7mm
±1
10
,68i
n ±0
,04
271m
m ±
1
1,03in ±0,0126,1mm ±0,3
4,96in ±0,00126mm ±0,1
Bas
e su
ppor
tO
ptio
nal
Lens
sup
port
Opt
iona
l
3,
78in
96m
m
3,
5in
89m
m
5,
03in
127,
7mm
4,29in ±0,01109mm ±0,2
5,03in
127,7mm
3,54in ±0,0190mm ±0,2
1,77in ±0,0145mm ±0,2
UN
C 1
/4"-
20 0
,75x
D H
elic
oil (
3x)
Cam
era
with
Len
s IR
f=88
,9 m
m (7
°) in
cl s
uppo
rt
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
6(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
2,64in ±0,0067mm ±0,1
10
,28i
n ±0
,04
261,
2mm
±1
2,
32in
±0,
0459
mm
±1
4,
63in
±0,
0411
7,6m
m ±
1
3,
11in
78,9
mm
3,
38in
85,9
mm
4,
63in
117,
6mm
Cam
era
with
Clo
se-u
p le
ns 1
,5X
(25
µm)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
7(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
2,64in ±0,0067mm ±0,1
9,
63in
±0,
0424
4,5m
m ±
1
2,
32in
±0,
0459
mm
±1
3,
98in
±0,
0410
1mm
±1
2,
45in
62,3
mm
2,
72in
69,2
mm
3,
98in
101m
m
Clo
se-u
p le
ns
IR L
ens
f=24
,6 m
m
1,
26in
32m
m
1,
12in
28,5
mm
3,
98in
101m
m
Clo
se-u
p le
ns
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 2
,9X
(50
µm)
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
8(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
9,
44in
±0,
0423
9,9m
m ±
1
2,64in ±0,0067mm ±0,1
2,
32in
±0,
0459
mm
±1
3,
8 ±0
,04
96,5
±1
2,
27in
57,8
mm
2,
55in
64,8
mm
3,
8in
96,5
mm
Clo
se-u
p le
ns
IR L
ens
f=24
,6 m
m
0,
94in
24m
m
1,
08in
27,4
mm
3,
8in
96,5
mm
Clo
se-u
p le
ns
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 5
,8X
(100
µm
)
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
9(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
FLIR A655sc 25°
General description
The FLIR A655sc is an excellent choice for those working in R&D and require the highest frame ratesand 640 × 480 pixel resolution. When using the camera in R&D, it is highly recommended to use theFLIR ResearchIR software from FLIR Systems.
The camera is equipped with the standard 25° lens.
Key features:
• Affordable.• 16-bit 640 × 480 pixel images at 50 Hz.• Start-and-stop recording in FLIR ResearchIR using digital input.• Windowing mode: 640 × 240 pixels at 100 Hz or 640 × 120 pixels at 200 Hz.
Typical applications:
• Mid- or high-end industrial R&D.
Imaging and optical data
IR resolution 640 × 480 pixels
Thermal sensitivity/NETD < 0.03°C @ +30°C (+86°F) / 30 mK
Field of view (FOV) 25° × 19° (31° diagonal)
Minimum focus distance 0.25 m (0.82 ft.)
Focal length 24.6 mm (0.97 in.)
Spatial resolution (IFOV) 0.68 mrad
Lens identification Automatic
F-number 1.0
Image frequency 50 Hz (100/200 Hz with windowing)
Focus Automatic or manual (built in motor)
Detector data
Detector type Focal plane array (FPA), uncooledmicrobolometer
Spectral range 7.5–14 µm
Detector pitch 17 µm
Detector time constant Typical 8 ms
Measurement
Object temperature range • –40°C to +150°C (–40°F to +302°F)• 100 to +650°C (+212 to +1202°F)
Accuracy ±2°C (±3.6°F) or ±2% of reading
P/N: 55001-0302Copyright© 2015, FLIR Systems, Inc.All rights reserved worldwide. Names and marksappearing herein are either registered trademarksor trademarks of FLIR Systems and/or itssubsidiaries. All other trademarks, trade names orcompany names referenced herein are used foridentification only and are the property of theirrespective owners.Document identityPubl. No.: 55001-0302Release:Commit: 26732Language: en-USModified: 2015-06-12Formatted: 2015-06-13Corporate HeadquartersFLIR Systems, Inc.27700 SW Parkway Ave.Wilsonville, OR 97070USATelephone: +1-503-498-3547Websitehttp://www.flir.comCustomer supporthttp://support.flir.comDisclaimerSpecifications subject to change without furthernotice. Camera models and accessories subjectto regional market considerations. Licenseprocedures may apply. Products described hereinmay be subject to US Export Regulations. Pleaserefer to exportquestions@flir.com with anyquestions.
1 (15) www.flir.com
FLIR A655sc 25°
P/N: 55001-0302© 2015, FLIR Systems, Inc.#55001-0302; r. /26732; en-US
Measurement analysis
Atmospheric transmission correction Automatic, based on inputs for distance,atmospheric temperature and relative humidity
Optics transmission correction Automatic, based on signals from internalsensors
Emissivity correction Variable from 0.01 to 1.0
Reflected apparent temperature correction Automatic, based on input of reflectedtemperature
External optics/windows correction Automatic, based on input of optics/windowtransmission and temperature
Measurement corrections Global object parameters
USB
USB • Control and image
USB, standard USB 2 HS
USB, connector type • USB Mini-B
USB, communication TCP/IP socket-based FLIR proprietary
USB, image streaming 16-bit 640 × 480 pixels @ 25 Hz• Signal linear• Temperature linear• Radiometric
USB, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),uPnP
Ethernet
Ethernet Control and image
Ethernet, type Gigabit Ethernet
Ethernet, standard IEEE 802.3
Ethernet, connector type RJ-45
Ethernet, communication TCP/IP socket-based FLIR proprietary andGenICam protocol
Ethernet, image streaming 16-bit 640 × 480 pixels @ 50 Hz
16-bit 640 × 240 pixels @ 100 Hz
16-bit 640 × 120 pixels @ 200 Hz
• Signal linear• Temperature linear• Radiometric
GigE Vision and GenICam compatible
Ethernet, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),uPnP
Digital input/output
Digital input, purpose Image tag (start, stop, general), Image flowcontrol, (stream on/off), Input ext. device(programmatically read)
Digital input 2 opto-isolated, 0–1.5 V = low, 3–25 V = high
Digital output, purpose Output to ext. device (programmatically set)
Digital output 2 opto-isolated, ON = supply (max. 100 mA), OFF= open
Digital I/O, isolation voltage 500 VRMS
2 (15) www.flir.com
FLIR A655sc 25°
P/N: 55001-0302© 2015, FLIR Systems, Inc.#55001-0302; r. /26732; en-US
Digital input/output
Digital I/O, supply voltage 6–24 VDC, max. 200 mA
Digital I/O, connector type 6-pole jackable screw terminal
Power system
External power operation 12/24 VDC, 24 W absolute max.
External power, connector type 2-pole jackable screw terminal
Voltage Allowed range 10–30 VDC
Environmental data
Operating temperature range –15°C to +50°C (+5°F to +122°F)
Storage temperature range –40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F)
EMC • EN 61000-6-2:2001 (Immunity)• EN 61000-6-3:2001 (Emission)• FCC 47 CFR Part 15 Class B (Emission)
Encapsulation IP 30 (IEC 60529)
Shock 25 g (IEC 60068-2-27)
Vibration 2 g (IEC 60068-2-6)
Physical data
Weight 0.90 kg (1.98 lb.)
Camera size (L × W × H) 216× 73 × 75 mm (8.5 × 2.9 × 3.0 in.)
Camera size, excl. lens (L × W × H) 203× 73 × 75 mm (8.0 × 2.9 × 3.0 in.)
Tripod mounting UNC ¼"-20 (on three sides)
Base mounting 2 × M4 thread mounting holes (on three sides)
Housing material Aluminum
Comments to physical data Outline dimensional drawings and STEP files canbe found at http://support.flir.com
Shipping information
Packaging, type Cardboard box
List of contents • Infrared camera with lens• Ethernet cable• FLIR ResearchIR Max 4 (licence only)• FLIR Tools download card• Hard transport case• Mains cable• Power cable, pig-tailed• Power supply• Printed documentation• USB cable• User documentation CD-ROM
Packaging, weight 5.4 kg (11.9 lb.)
Packaging, size 360 × 180 × 550 mm (14.2 × 7.1 × 21.7 in.)
EAN-13 7332558003312
UPC-12 845188002794
Country of origin Sweden
Supplies & accessories:
• T197914; IR lens, f=41.3 mm (15°) with case
3 (15) www.flir.com
FLIR A655sc 25°
P/N: 55001-0302© 2015, FLIR Systems, Inc.#55001-0302; r. /26732; en-US
• T197922; IR lens, f=24.6 mm (25°) with case• T197915; IR lens, f=13.1 mm (45°) with case• T198059; Close-up IR lens, 2.9× (50 µm) with case• T198060; Close-up IR lens, 5.8× (100 µm) with case• T198065; IR lens, f=6.5 mm (80°) with case• T198165; IR lens, f=88.9 mm (7°) with case and support for A6xx/A6xxsc• T198066; Close-up IR lens, 1.5× (25 µm) with case• T197896; High temperature option +300°C to 2000°C (+572°F to 3632°F)• 1910400; Power cord EU• 1910401; Power cord US• 1910402; Power cord UK• T910922; Power supply, incl. multi plugs, for A3xx, A3xxsc, A6xx and A6xxsc• T911182; Power supply for A3xx f, IP66• 1910423; USB cable Std A <-> Mini-B• T951004ACC; Ethernet cable CAT-6, 2m/6.6 ft.• 1910586ACC; Power cable, pigtailed• T197871ACC; Hard transport case for A3xx/A6xx series• T197870ACC; Cardboard box for A3xx/A6xx series• T126889ACC; Filter holder for A6xx lenses• T198584; FLIR Tools• T198583; FLIR Tools+ (license only)• DSW-10000; FLIR IR Camera Player• T198697; FLIR ResearchIR Max + HSDR 4• T199014; FLIR ResearchIR Max + HSDR 4• T199044; FLIR ResearchIR Max + HSDR 4 Upgrade• T198696; FLIR ResearchIR Max 4• T199013; FLIR ResearchIR Max 4• T199043; FLIR ResearchIR Max 4 Upgrade• T198731; FLIR ResearchIR Standard 4• T199012; FLIR ResearchIR Standard 4• T199042; FLIR ResearchIR Standard 4 Upgrade• T198567; ThermoVision™ System Developers Kit Ver. 2.6• T198566; ThermoVision™ LabVIEW® Digital Toolkit Ver. 3.3
4 (15) www.flir.com
12mm±0,1 (3x)0,47in±0,004
24mm±0,1 (3x)0,94in±0,004
59m
m±1
2,32
in±0
,04
203m
m±1
7,97
in±0
,04
67mm0+0,1
2,64in0,000+0,004
36,9mm1,45in
73m
m±0
,12,
87in
±0,0
04
36,5
mm
1,44
in
36,9mm±0,11,45in±0,004
74,5mm±0,12,93in±0,004
UN
C 1
/4-2
0 0,
75xD
Hel
icoi
l (3x
)
M4
1xD
Hel
icoi
l (6x
)
1,32
in33
,5m
m
1i
n25
,5m
m
FPA
act
ive
area
at
focu
s fa
r (in
finity
)
Cam
era
hous
ing
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
1(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
11
,67i
n ±0
,04
296,
5mm
±1
2,
32in
±0,
0459
mm
±1
6,
02in
±0,
0415
2,9m
m ±
1
4,
5in
114,
4mm
4,
78in
121,
4mm
6,
03in
153,
1mm
Cam
era
with
Len
s IR
f=6,
5 m
m (8
0°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
2(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
81m
m±1
3,19
in±0
,04
224,
5mm
±18,
84in
±0,0
4
67mm±0,12,64in±0,004
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
49,3
mm
1,94
in
42,3
mm
1,66
in
81m
m3,
19in
Cam
era
with
Len
s IR
f=13
,1 m
m (4
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
3(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
72,5
mm
±12,
85in
±0,0
4
67mm±0,12,64in±0,004
216m
m±1
8,5i
n±0
,04
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
40,8
mm
1,6i
n
33,8
mm
1,33
in
72,5
mm
2,85
in
Cam
era
with
Len
s IR
f=24
,6 m
m (2
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
4(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
78,2
mm
±13,
08in
±0,0
4
67mm±0,12,64in±0,004
221,
8mm
±18,
73in
±0,0
4
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
46,5
mm
1,83
in
39,5
mm
1,56
in
78,2
mm
3,08
in
Cam
era
with
Len
s IR
f=41
,3 m
m (1
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
5(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,56in ±0,0164,9mm ±0,2
2,
76in
70m
m
2,
32in
±0,
0459
mm
±1
5i
n ±0
,04
127,
7mm
±1
10
,68i
n ±0
,04
271m
m ±
1
1,03in ±0,0126,1mm ±0,3
4,96in ±0,00126mm ±0,1
Bas
e su
ppor
tO
ptio
nal
Lens
sup
port
Opt
iona
l
3,
78in
96m
m
3,
5in
89m
m
5,
03in
127,
7mm
4,29in ±0,01109mm ±0,2
5,03in
127,7mm
3,54in ±0,0190mm ±0,2
1,77in ±0,0145mm ±0,2
UN
C 1
/4"-
20 0
,75x
D H
elic
oil (
3x)
Cam
era
with
Len
s IR
f=88
,9 m
m (7
°) in
cl s
uppo
rt
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
6(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
2,64in ±0,0067mm ±0,1
10
,28i
n ±0
,04
261,
2mm
±1
2,
32in
±0,
0459
mm
±1
4,
63in
±0,
0411
7,6m
m ±
1
3,
11in
78,9
mm
3,
38in
85,9
mm
4,
63in
117,
6mm
Cam
era
with
Clo
se-u
p le
ns 1
,5X
(25
µm)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
7(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
2,64in ±0,0067mm ±0,1
9,
63in
±0,
0424
4,5m
m ±
1
2,
32in
±0,
0459
mm
±1
3,
98in
±0,
0410
1mm
±1
2,
45in
62,3
mm
2,
72in
69,2
mm
3,
98in
101m
m
Clo
se-u
p le
ns
IR L
ens
f=24
,6 m
m
1,
26in
32m
m
1,
12in
28,5
mm
3,
98in
101m
m
Clo
se-u
p le
ns
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 2
,9X
(50
µm)
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
8(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
9,
44in
±0,
0423
9,9m
m ±
1
2,64in ±0,0067mm ±0,1
2,
32in
±0,
0459
mm
±1
3,
8 ±0
,04
96,5
±1
2,
27in
57,8
mm
2,
55in
64,8
mm
3,
8in
96,5
mm
Clo
se-u
p le
ns
IR L
ens
f=24
,6 m
m
0,
94in
24m
m
1,
08in
27,4
mm
3,
8in
96,5
mm
Clo
se-u
p le
ns
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 5
,8X
(100
µm
)
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
9(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
FLIR A655sc 45°
General description
The FLIR A655sc is an excellent choice for those working in R&D and require the highest frame ratesand 640 × 480 pixel resolution. When using the camera in R&D, it is highly recommended to use theFLIR ResearchIR software from FLIR Systems.
The camera is equipped with a 45° lens.
Key features:
• Affordable.• 16-bit 640 × 480 pixel images at 50 Hz.• Start-and-stop recording in FLIR ResearchIR using digital input.• Windowing mode: 640 × 240 pixels at 100 Hz or 640 × 120 pixels at 200 Hz.
Typical applications:
• Mid- or high-end industrial R&D.
Imaging and optical data
IR resolution 640 × 480 pixels
Thermal sensitivity/NETD < 0.03°C @ +30°C (+86°F) / 30 mK
Field of view (FOV) 45° × 34° (55° diagonal)
Minimum focus distance 0.15 m (0.49 ft.)
Focal length 13.1 mm (0.52 in.)
Spatial resolution (IFOV) 1.23 mrad
Lens identification Automatic
F-number 1.0
Image frequency 50 Hz (100/200 Hz with windowing)
Focus Automatic or manual (built in motor)
Detector data
Detector type Focal plane array (FPA), uncooledmicrobolometer
Spectral range 7.5–14 µm
Detector pitch 17 µm
Detector time constant Typical 8 ms
Measurement
Object temperature range • –40°C to +150°C (–40°F to +302°F)• 100 to +650°C (+212 to +1202°F)
Accuracy ±2°C (±3.6°F) or ±2% of reading
P/N: 55001-0303Copyright© 2015, FLIR Systems, Inc.All rights reserved worldwide. Names and marksappearing herein are either registered trademarksor trademarks of FLIR Systems and/or itssubsidiaries. All other trademarks, trade names orcompany names referenced herein are used foridentification only and are the property of theirrespective owners.Document identityPubl. No.: 55001-0303Release:Commit: 26732Language: en-USModified: 2015-06-12Formatted: 2015-06-13Corporate HeadquartersFLIR Systems, Inc.27700 SW Parkway Ave.Wilsonville, OR 97070USATelephone: +1-503-498-3547Websitehttp://www.flir.comCustomer supporthttp://support.flir.comDisclaimerSpecifications subject to change without furthernotice. Camera models and accessories subjectto regional market considerations. Licenseprocedures may apply. Products described hereinmay be subject to US Export Regulations. Pleaserefer to exportquestions@flir.com with anyquestions.
1 (15) www.flir.com
FLIR A655sc 45°
P/N: 55001-0303© 2015, FLIR Systems, Inc.#55001-0303; r. /26732; en-US
Measurement analysis
Atmospheric transmission correction Automatic, based on inputs for distance,atmospheric temperature and relative humidity
Optics transmission correction Automatic, based on signals from internalsensors
Emissivity correction Variable from 0.01 to 1.0
Reflected apparent temperature correction Automatic, based on input of reflectedtemperature
External optics/windows correction Automatic, based on input of optics/windowtransmission and temperature
Measurement corrections Global object parameters
USB
USB • Control and image
USB, standard USB 2 HS
USB, connector type • USB Mini-B
USB, communication TCP/IP socket-based FLIR proprietary
USB, image streaming 16-bit 640 × 480 pixels @ 25 Hz• Signal linear• Temperature linear• Radiometric
USB, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),uPnP
Ethernet
Ethernet Control and image
Ethernet, type Gigabit Ethernet
Ethernet, standard IEEE 802.3
Ethernet, connector type RJ-45
Ethernet, communication TCP/IP socket-based FLIR proprietary andGenICam protocol
Ethernet, image streaming 16-bit 640 × 480 pixels @ 50 Hz
16-bit 640 × 240 pixels @ 100 Hz
16-bit 640 × 120 pixels @ 200 Hz
• Signal linear• Temperature linear• Radiometric
GigE Vision and GenICam compatible
Ethernet, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),uPnP
Digital input/output
Digital input, purpose Image tag (start, stop, general), Image flowcontrol, (stream on/off), Input ext. device(programmatically read)
Digital input 2 opto-isolated, 0–1.5 V = low, 3–25 V = high
Digital output, purpose Output to ext. device (programmatically set)
Digital output 2 opto-isolated, ON = supply (max. 100 mA), OFF= open
Digital I/O, isolation voltage 500 VRMS
2 (15) www.flir.com
FLIR A655sc 45°
P/N: 55001-0303© 2015, FLIR Systems, Inc.#55001-0303; r. /26732; en-US
Digital input/output
Digital I/O, supply voltage 6–24 VDC, max. 200 mA
Digital I/O, connector type 6-pole jackable screw terminal
Power system
External power operation 12/24 VDC, 24 W absolute max.
External power, connector type 2-pole jackable screw terminal
Voltage Allowed range 10–30 VDC
Environmental data
Operating temperature range –15°C to +50°C (+5°F to +122°F)
Storage temperature range –40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F)
EMC • EN 61000-6-2:2001 (Immunity)• EN 61000-6-3:2001 (Emission)• FCC 47 CFR Part 15 Class B (Emission)
Encapsulation IP 30 (IEC 60529)
Shock 25 g (IEC 60068-2-27)
Vibration 2 g (IEC 60068-2-6)
Physical data
Weight 0.94 kg (2.07 lb.)
Camera size (L × W × H) 225× 73 × 75 mm (8.8 × 2.9 × 3.0 in.)
Camera size, excl. lens (L × W × H) 203× 73 × 75 mm (8.0 × 2.9 × 3.0 in.)
Tripod mounting UNC ¼"-20 (on three sides)
Base mounting 2 × M4 thread mounting holes (on three sides)
Housing material Aluminum
Comments to physical data Outline dimensional drawings and STEP files canbe found at http://support.flir.com
Shipping information
Packaging, type Cardboard box
List of contents • Infrared camera with lens• Ethernet cable• FLIR ResearchIR Max 4 (licence only)• FLIR Tools download card• Hard transport case• Mains cable• Power cable, pig-tailed• Power supply• Printed documentation• USB cable• User documentation CD-ROM
Packaging, weight
Packaging, size 360 × 180 × 550 mm (14.2 × 7.1 × 21.7 in.)
EAN-13 7332558003329
UPC-12 845188002800
Country of origin Sweden
Supplies & accessories:
• T197914; IR lens, f=41.3 mm (15°) with case
3 (15) www.flir.com
FLIR A655sc 45°
P/N: 55001-0303© 2015, FLIR Systems, Inc.#55001-0303; r. /26732; en-US
• T197922; IR lens, f=24.6 mm (25°) with case• T197915; IR lens, f=13.1 mm (45°) with case• T198065; IR lens, f=6.5 mm (80°) with case• T198165; IR lens, f=88.9 mm (7°) with case and support for A6xx/A6xxsc• T198066; Close-up IR lens, 1.5× (25 µm) with case• T197896; High temperature option +300°C to 2000°C (+572°F to 3632°F)• 1910400; Power cord EU• 1910401; Power cord US• 1910402; Power cord UK• T910922; Power supply, incl. multi plugs, for A3xx, A3xxsc, A6xx and A6xxsc• T911182; Power supply for A3xx f, IP66• 1910423; USB cable Std A <-> Mini-B• T951004ACC; Ethernet cable CAT-6, 2m/6.6 ft.• 1910586ACC; Power cable, pigtailed• T197871ACC; Hard transport case for A3xx/A6xx series• T197870ACC; Cardboard box for A3xx/A6xx series• T126889ACC; Filter holder for A6xx lenses• T198584; FLIR Tools• T198583; FLIR Tools+ (license only)• DSW-10000; FLIR IR Camera Player• T198697; FLIR ResearchIR Max + HSDR 4• T199014; FLIR ResearchIR Max + HSDR 4• T199044; FLIR ResearchIR Max + HSDR 4 Upgrade• T198696; FLIR ResearchIR Max 4• T199013; FLIR ResearchIR Max 4• T199043; FLIR ResearchIR Max 4 Upgrade• T198731; FLIR ResearchIR Standard 4• T199012; FLIR ResearchIR Standard 4• T199042; FLIR ResearchIR Standard 4 Upgrade• T198567; ThermoVision™ System Developers Kit Ver. 2.6• T198566; ThermoVision™ LabVIEW® Digital Toolkit Ver. 3.3
4 (15) www.flir.com
12mm±0,1 (3x)0,47in±0,004
24mm±0,1 (3x)0,94in±0,004
59m
m±1
2,32
in±0
,04
203m
m±1
7,97
in±0
,04
67mm0+0,1
2,64in0,000+0,004
36,9mm1,45in
73m
m±0
,12,
87in
±0,0
04
36,5
mm
1,44
in
36,9mm±0,11,45in±0,004
74,5mm±0,12,93in±0,004
UN
C 1
/4-2
0 0,
75xD
Hel
icoi
l (3x
)
M4
1xD
Hel
icoi
l (6x
)
1,32
in33
,5m
m
1i
n25
,5m
m
FPA
act
ive
area
at
focu
s fa
r (in
finity
)
Cam
era
hous
ing
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
1(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
11
,67i
n ±0
,04
296,
5mm
±1
2,
32in
±0,
0459
mm
±1
6,
02in
±0,
0415
2,9m
m ±
1
4,
5in
114,
4mm
4,
78in
121,
4mm
6,
03in
153,
1mm
Cam
era
with
Len
s IR
f=6,
5 m
m (8
0°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
2(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
81m
m±1
3,19
in±0
,04
224,
5mm
±18,
84in
±0,0
4
67mm±0,12,64in±0,004
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
49,3
mm
1,94
in
42,3
mm
1,66
in
81m
m3,
19in
Cam
era
with
Len
s IR
f=13
,1 m
m (4
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
3(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
72,5
mm
±12,
85in
±0,0
4
67mm±0,12,64in±0,004
216m
m±1
8,5i
n±0
,04
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
40,8
mm
1,6i
n
33,8
mm
1,33
in
72,5
mm
2,85
in
Cam
era
with
Len
s IR
f=24
,6 m
m (2
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
4(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
78,2
mm
±13,
08in
±0,0
4
67mm±0,12,64in±0,004
221,
8mm
±18,
73in
±0,0
4
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
46,5
mm
1,83
in
39,5
mm
1,56
in
78,2
mm
3,08
in
Cam
era
with
Len
s IR
f=41
,3 m
m (1
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
5(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,56in ±0,0164,9mm ±0,2
2,
76in
70m
m
2,
32in
±0,
0459
mm
±1
5i
n ±0
,04
127,
7mm
±1
10
,68i
n ±0
,04
271m
m ±
1
1,03in ±0,0126,1mm ±0,3
4,96in ±0,00126mm ±0,1
Bas
e su
ppor
tO
ptio
nal
Lens
sup
port
Opt
iona
l
3,
78in
96m
m
3,
5in
89m
m
5,
03in
127,
7mm
4,29in ±0,01109mm ±0,2
5,03in
127,7mm
3,54in ±0,0190mm ±0,2
1,77in ±0,0145mm ±0,2
UN
C 1
/4"-
20 0
,75x
D H
elic
oil (
3x)
Cam
era
with
Len
s IR
f=88
,9 m
m (7
°) in
cl s
uppo
rt
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
6(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
2,64in ±0,0067mm ±0,1
10
,28i
n ±0
,04
261,
2mm
±1
2,
32in
±0,
0459
mm
±1
4,
63in
±0,
0411
7,6m
m ±
1
3,
11in
78,9
mm
3,
38in
85,9
mm
4,
63in
117,
6mm
Cam
era
with
Clo
se-u
p le
ns 1
,5X
(25
µm)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
7(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
2,64in ±0,0067mm ±0,1
9,
63in
±0,
0424
4,5m
m ±
1
2,
32in
±0,
0459
mm
±1
3,
98in
±0,
0410
1mm
±1
2,
45in
62,3
mm
2,
72in
69,2
mm
3,
98in
101m
m
Clo
se-u
p le
ns
IR L
ens
f=24
,6 m
m
1,
26in
32m
m
1,
12in
28,5
mm
3,
98in
101m
m
Clo
se-u
p le
ns
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 2
,9X
(50
µm)
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
8(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
9,
44in
±0,
0423
9,9m
m ±
1
2,64in ±0,0067mm ±0,1
2,
32in
±0,
0459
mm
±1
3,
8 ±0
,04
96,5
±1
2,
27in
57,8
mm
2,
55in
64,8
mm
3,
8in
96,5
mm
Clo
se-u
p le
ns
IR L
ens
f=24
,6 m
m
0,
94in
24m
m
1,
08in
27,4
mm
3,
8in
96,5
mm
Clo
se-u
p le
ns
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 5
,8X
(100
µm
)
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
9(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
FLIR A655sc 80°
General description
The FLIR A655sc is an excellent choice for those working in R&D and require the highest frame ratesand 640 × 480 pixel resolution. When using the camera in R&D, it is highly recommended to use theFLIR ResearchIR software from FLIR Systems.
The camera is equipped with a 80° lens.
Key features:
• Affordable.• 16-bit 640 × 480 pixel images at 50 Hz.• Start-and-stop recording in FLIR ResearchIR using digital input.• Windowing mode: 640 × 240 pixels at 100 Hz or 640 × 120 pixels at 200 Hz.
Typical applications:
• Mid- or high-end industrial R&D.
Imaging and optical data
IR resolution 640 × 480 pixels
Thermal sensitivity/NETD < 0.03°C @ +30°C (+86°F) / 30 mK
Field of view (FOV) 80° × 64.4° (92.8° diagonal)
Minimum focus distance 65 mm (2.6 in.)
Focal length 6.5 mm (0.26 in.)
Spatial resolution (IFOV) 2.62 mrad
Lens identification Automatic
F-number 1.0
Image frequency 50 Hz (100/200 Hz with windowing)
Focus Automatic or manual (built in motor)
Detector data
Detector type Focal plane array (FPA), uncooledmicrobolometer
Spectral range 7.5–14 µm
Detector pitch 17 µm
Detector time constant Typical 8 ms
Measurement
Object temperature range • –40°C to +150°C (–40°F to +302°F)• 100 to +650°C (+212 to +1202°F)
Accuracy ±2°C (±3.6°F) or ±2% of reading
P/N: 55001-0305Copyright© 2015, FLIR Systems, Inc.All rights reserved worldwide. Names and marksappearing herein are either registered trademarksor trademarks of FLIR Systems and/or itssubsidiaries. All other trademarks, trade names orcompany names referenced herein are used foridentification only and are the property of theirrespective owners.Document identityPubl. No.: 55001-0305Release:Commit: 26732Language: en-USModified: 2015-06-12Formatted: 2015-06-13Corporate HeadquartersFLIR Systems, Inc.27700 SW Parkway Ave.Wilsonville, OR 97070USATelephone: +1-503-498-3547Websitehttp://www.flir.comCustomer supporthttp://support.flir.comDisclaimerSpecifications subject to change without furthernotice. Camera models and accessories subjectto regional market considerations. Licenseprocedures may apply. Products described hereinmay be subject to US Export Regulations. Pleaserefer to exportquestions@flir.com with anyquestions.
1 (15) www.flir.com
FLIR A655sc 80°
P/N: 55001-0305© 2015, FLIR Systems, Inc.#55001-0305; r. /26732; en-US
Measurement analysis
Atmospheric transmission correction Automatic, based on inputs for distance,atmospheric temperature and relative humidity
Optics transmission correction Automatic, based on signals from internalsensors
Emissivity correction Variable from 0.01 to 1.0
Reflected apparent temperature correction Automatic, based on input of reflectedtemperature
External optics/windows correction Automatic, based on input of optics/windowtransmission and temperature
Measurement corrections Global object parameters
USB
USB • Control and image
USB, standard USB 2 HS
USB, connector type • USB Mini-B
USB, communication TCP/IP socket-based FLIR proprietary
USB, image streaming 16-bit 640 × 480 pixels @ 25 Hz• Signal linear• Temperature linear• Radiometric
USB, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),uPnP
Ethernet
Ethernet Control and image
Ethernet, type Gigabit Ethernet
Ethernet, standard IEEE 802.3
Ethernet, connector type RJ-45
Ethernet, communication TCP/IP socket-based FLIR proprietary andGenICam protocol
Ethernet, image streaming 16-bit 640 × 480 pixels @ 50 Hz
16-bit 640 × 240 pixels @ 100 Hz
16-bit 640 × 120 pixels @ 200 Hz
• Signal linear• Temperature linear• Radiometric
GigE Vision and GenICam compatible
Ethernet, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),uPnP
Digital input/output
Digital input, purpose Image tag (start, stop, general), Image flowcontrol, (stream on/off), Input ext. device(programmatically read)
Digital input 2 opto-isolated, 0–1.5 V = low, 3–25 V = high
Digital output, purpose Output to ext. device (programmatically set)
Digital output 2 opto-isolated, ON = supply (max. 100 mA), OFF= open
Digital I/O, isolation voltage 500 VRMS
2 (15) www.flir.com
FLIR A655sc 80°
P/N: 55001-0305© 2015, FLIR Systems, Inc.#55001-0305; r. /26732; en-US
Digital input/output
Digital I/O, supply voltage 6–24 VDC, max. 200 mA
Digital I/O, connector type 6-pole jackable screw terminal
Power system
External power operation 12/24 VDC, 24 W absolute max.
External power, connector type 2-pole jackable screw terminal
Voltage Allowed range 10–30 VDC
Environmental data
Operating temperature range –15°C to +50°C (+5°F to +122°F)
Storage temperature range –40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F)
EMC • EN 61000-6-2:2001 (Immunity)• EN 61000-6-3:2001 (Emission)• FCC 47 CFR Part 15 Class B (Emission)
Encapsulation IP 30 (IEC 60529)
Shock 25 g (IEC 60068-2-27)
Vibration 2 g (IEC 60068-2-6)
Physical data
Weight 1.17 kg (2.58 lb.)
Camera size (L × W × H) 297 × 73 × 75 mm (11.7 × 2.9 × 3.0 in.)
Camera size, excl. lens (L × W × H) 203× 73 × 75 mm (8.0 × 2.9 × 3.0 in.)
Tripod mounting UNC ¼"-20 (on three sides)
Base mounting 2 × M4 thread mounting holes (on three sides)
Housing material Aluminum
Comments to physical data Outline dimensional drawings and STEP files canbe found at http://support.flir.com
Shipping information
Packaging, type Cardboard box
List of contents • Infrared camera with lens• Ethernet cable• FLIR ResearchIR Max 4 (licence only)• FLIR Tools download card• Hard transport case• Mains cable• Power cable, pig-tailed• Power supply• Printed documentation• USB cable• User documentation CD-ROM
Packaging, weight
Packaging, size
EAN-13 7332558006054
UPC-12 845188006266
Country of origin Sweden
Supplies & accessories:
• T197914; IR lens, f=41.3 mm (15°) with case
3 (15) www.flir.com
FLIR A655sc 80°
P/N: 55001-0305© 2015, FLIR Systems, Inc.#55001-0305; r. /26732; en-US
• T197922; IR lens, f=24.6 mm (25°) with case• T197915; IR lens, f=13.1 mm (45°) with case• T198065; IR lens, f=6.5 mm (80°) with case• T198165; IR lens, f=88.9 mm (7°) with case and support for A6xx/A6xxsc• T197896; High temperature option +300°C to 2000°C (+572°F to 3632°F)• 1910400; Power cord EU• 1910401; Power cord US• 1910402; Power cord UK• T910922; Power supply, incl. multi plugs, for A3xx, A3xxsc, A6xx and A6xxsc• T911182; Power supply for A3xx f, IP66• 1910423; USB cable Std A <-> Mini-B• T951004ACC; Ethernet cable CAT-6, 2m/6.6 ft.• 1910586ACC; Power cable, pigtailed• T197871ACC; Hard transport case for A3xx/A6xx series• T197870ACC; Cardboard box for A3xx/A6xx series• T126889ACC; Filter holder for A6xx lenses• T198584; FLIR Tools• T198583; FLIR Tools+ (license only)• DSW-10000; FLIR IR Camera Player• T198697; FLIR ResearchIR Max + HSDR 4• T199014; FLIR ResearchIR Max + HSDR 4• T199044; FLIR ResearchIR Max + HSDR 4 Upgrade• T198696; FLIR ResearchIR Max 4• T199013; FLIR ResearchIR Max 4• T199043; FLIR ResearchIR Max 4 Upgrade• T198731; FLIR ResearchIR Standard 4• T199012; FLIR ResearchIR Standard 4• T199042; FLIR ResearchIR Standard 4 Upgrade• T198567; ThermoVision™ System Developers Kit Ver. 2.6• T198566; ThermoVision™ LabVIEW® Digital Toolkit Ver. 3.3
4 (15) www.flir.com
12mm±0,1 (3x)0,47in±0,004
24mm±0,1 (3x)0,94in±0,004
59m
m±1
2,32
in±0
,04
203m
m±1
7,97
in±0
,04
67mm0+0,1
2,64in0,000+0,004
36,9mm1,45in
73m
m±0
,12,
87in
±0,0
04
36,5
mm
1,44
in
36,9mm±0,11,45in±0,004
74,5mm±0,12,93in±0,004
UN
C 1
/4-2
0 0,
75xD
Hel
icoi
l (3x
)
M4
1xD
Hel
icoi
l (6x
)
1,32
in33
,5m
m
1i
n25
,5m
m
FPA
act
ive
area
at
focu
s fa
r (in
finity
)
Cam
era
hous
ing
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
1(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
11
,67i
n ±0
,04
296,
5mm
±1
2,
32in
±0,
0459
mm
±1
6,
02in
±0,
0415
2,9m
m ±
1
4,
5in
114,
4mm
4,
78in
121,
4mm
6,
03in
153,
1mm
Cam
era
with
Len
s IR
f=6,
5 m
m (8
0°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
2(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
81m
m±1
3,19
in±0
,04
224,
5mm
±18,
84in
±0,0
4
67mm±0,12,64in±0,004
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
49,3
mm
1,94
in
42,3
mm
1,66
in
81m
m3,
19in
Cam
era
with
Len
s IR
f=13
,1 m
m (4
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
3(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
72,5
mm
±12,
85in
±0,0
4
67mm±0,12,64in±0,004
216m
m±1
8,5i
n±0
,04
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
40,8
mm
1,6i
n
33,8
mm
1,33
in
72,5
mm
2,85
in
Cam
era
with
Len
s IR
f=24
,6 m
m (2
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
4(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
59m
m±1
2,32
in±0
,04
78,2
mm
±13,
08in
±0,0
4
67mm±0,12,64in±0,004
221,
8mm
±18,
73in
±0,0
4
73m
m±0
,12,
87in
±0,0
04
74,5mm±0,12,93in±0,004
46,5
mm
1,83
in
39,5
mm
1,56
in
78,2
mm
3,08
in
Cam
era
with
Len
s IR
f=41
,3 m
m (1
5°)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
5(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,56in ±0,0164,9mm ±0,2
2,
76in
70m
m
2,
32in
±0,
0459
mm
±1
5i
n ±0
,04
127,
7mm
±1
10
,68i
n ±0
,04
271m
m ±
1
1,03in ±0,0126,1mm ±0,3
4,96in ±0,00126mm ±0,1
Bas
e su
ppor
tO
ptio
nal
Lens
sup
port
Opt
iona
l
3,
78in
96m
m
3,
5in
89m
m
5,
03in
127,
7mm
4,29in ±0,01109mm ±0,2
5,03in
127,7mm
3,54in ±0,0190mm ±0,2
1,77in ±0,0145mm ±0,2
UN
C 1
/4"-
20 0
,75x
D H
elic
oil (
3x)
Cam
era
with
Len
s IR
f=88
,9 m
m (7
°) in
cl s
uppo
rt
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
6(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
2,64in ±0,0067mm ±0,1
10
,28i
n ±0
,04
261,
2mm
±1
2,
32in
±0,
0459
mm
±1
4,
63in
±0,
0411
7,6m
m ±
1
3,
11in
78,9
mm
3,
38in
85,9
mm
4,
63in
117,
6mm
Cam
era
with
Clo
se-u
p le
ns 1
,5X
(25
µm)
For a
dditi
onal
dim
ensi
ons
see
page
1
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
7(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
2,64in ±0,0067mm ±0,1
9,
63in
±0,
0424
4,5m
m ±
1
2,
32in
±0,
0459
mm
±1
3,
98in
±0,
0410
1mm
±1
2,
45in
62,3
mm
2,
72in
69,2
mm
3,
98in
101m
m
Clo
se-u
p le
ns
IR L
ens
f=24
,6 m
m
1,
26in
32m
m
1,
12in
28,5
mm
3,
98in
101m
m
Clo
se-u
p le
ns
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 2
,9X
(50
µm)
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
8(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
2,
87in
±0,
0073
mm
±0,
1
2,93in ±0,0074,5mm ±0,1
9,
44in
±0,
0423
9,9m
m ±
1
2,64in ±0,0067mm ±0,1
2,
32in
±0,
0459
mm
±1
3,
8 ±0
,04
96,5
±1
2,
27in
57,8
mm
2,
55in
64,8
mm
3,
8in
96,5
mm
Clo
se-u
p le
ns
IR L
ens
f=24
,6 m
m
0,
94in
24m
m
1,
08in
27,4
mm
3,
8in
96,5
mm
Clo
se-u
p le
ns
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 5
,8X
(100
µm
)
Shee
t
Dra
win
g N
o.
Size
Che
ckD
raw
n by
Den
omin
atio
nA3
9(9)
T126
925
Basi
c di
men
sion
s FL
IR A
/SC
6xx
CAH
A20
12-0
4-18
R&D
The
rmog
raph
yM
odifi
ed
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
6Si
ze
A
1:2
Scal
e
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
-
top related