Transcript
FLATPANEL DISPLAYS
Contents
• INTRODUCTION• TYPES OF FLAT PANEL DISPLAYS• APPLICATIONS OF FLAT PANEL • DISPLAYS• ADVANTAGES OF FLAT PANEL DISPLAYS• DISADVANTAGES OF • FLAT PANEL DISPLAYS• HOW FLAT PANEL WORK AND MANUFACTURED• DIFFERENCE BETWEEN FLAT PANEL DISPLAYS AND CRT
INTRODUCTION
• The first ever flat panel display was invented in 1964 at the University of Illinois.
• Flat panel displays also called Flat Screen.• It encompass a growing number of electronic visual
display technologies.• It enables much lighter and thinner than
traditional television set and video displays that use cathode ray tubes (CRT).
• These are usually less than 100 mm (4 inches) thick.
Types
• VOLATILE FLAT PANEL DISPLAYS• STATIC FLAT PANEL DISPLAYS
Volatile Flat Panel Displays
• Volatile displays require that pixels be periodically refreshed.
• This refresh typically occurs many times a second.
• Some examples of volatile flat panel displays :-• Light-emitting diode displays (LED)• Liquid crystal displays (LCDs)• Organic light-emitting diode (OLED)• Plasma displays
STATIC FLAT PANEL DISPLAYS
• These rely on materials whose color states are bistable.
• This results in a much more energy-efficient display.
• These require slow refresh rates.
Other Different types of flat panel displays
• Liquid crystal display (LCD)• Plasma display panel (PDP)• Light emitting diode (LED) display• Organic light emitting diodes (OLEDs)
Liquid crystal display (LCD)
• LCDs are the established technology for a broad range of uses.• LCDs take up less space, weigh less and use less power.
Plasma display panel (PDP)
• Their visual displays are comparable to cathode ray tubes, but can be built much thinner and flatter.• These are not suitable for portable and handheld devices.
Light emitting diode (LED) display
• These used for large, outdoor screens and billboards.
• Each pixel is formed using a cluster of red, green and blue LEDs.
Organic light emitting diodes (OLEDs)
• OLEDs are self-emissive, highly efficient and have excellent optical properties.
• There are two principle technologies of OLED:-• Vacuum Deposition Systems • Solution Processable OLED Systems
APPLICATIONS OF FLAT PANEL DISPLAYS
• Laptops
• Televisions • Cellular phones
• Digital cameras
• Camcorders
• Compact cameras
• Pocket video camera
ADVANTAGES OF FLAT PANEL DISPLAYS
• Space Saving • Display size • Power consumption
DISADVANTAGES OF FLATPANEL DISPLAY
• Durability• Color• Viewing Angle• Price
Working
• Liquid crystals• Passive LCDs• Active matrix LCDs• Colored LCDs
Liquid crystals
Setup of a typical LCD panel: PolarizerGlass substrateSealSpacer ITO Hard coat PolyimideTFT
Passive Display
• A passive matrix LCD is composed of several layers.
• The main parts are:-Two glass platesConnected by seals
Active matrix LCDs
• Active matrix technology is using thin-film transistors (TFT).
• They are produced in tube furnaces.
Color LCD’s
• Color filters are applied to the inside of the front glass sheet.
• Three colors red, blue, green and a black matrix are used.
How LCD’s are manufactured?
• The rear glass plates are the substrate for the TFT production in case of active matrix LCDs.
• The front glass plate wears the color filter layers, same as the rear glass plate ITO, hard coat and polyimide and the sealing.
• The singularized displays are filled with liquid crystal liquid and the opening in the seal is closed.
DIFFERENCE BETWEEN FLAT PANEL DISPLAYS AND CRT?
• Resolution & Viewing Quality• Refresh Rate• Physical Size• Price
top related