Fasteners Home - DIRECT...Screw Fixings with forming screws for thermoplastics and light alloy materials and cutting types for use with thermosetting materials. The adoption of these
Post on 19-Aug-2020
3 Views
Preview:
Transcript
DIRECT
SCREW
FIXINGS
Wherever you are... we have the solution!
FOR PLASTICS & LIGHT ALLOYS
DSF1008
INTRODUCTIONDirect Screw Fixings provide a fast, economical, production line solution to fixing plastic and light alloy components where the need for re-use and high assembly torque is not a major factor.
The thread forms contained within this catalogue have been engineered to maximise the advantages of Direct Screw Fixings with forming screws for thermoplastics and light alloy materials and cutting types for use with thermosetting materials.
The adoption of these thread forms ensures that the margins between installation and stripping torque are optimised (an essential for trouble free installation) together with higher than normal re-usability - typically greater than 10 times-into thermoplastic materials, and maximum resistance to vibration.
The information in this catalogue is intended as a general guide. For further advice please consult your local PSM Sales Engineer or our Applications Engineers. The PSM Technology Centres can also provide pre-production test facilities for accurate performance data.
TMP SERIEST M P S E R I E S - D e s i g n e d f o r u s e i n thermoplastics, its key design features include a profiled thread root to assist plastic flow, a 30° flank angle to reduce boss bursting forces and an 8° pitch angle.
TMS SERIES-The cutting notch combined with the profiled thread root gives low installation torques whilst the special thread f o r m p r o v i d e s h i g h stripping torques when used in thermosetting materials.
Technical details may change. Please contact PSM
International for latest drawings and specifications.
DIRECT SCREW FIXINGS
DSF-01
TMA SERIES-Developed to provide an effective sc rew f i x ing in l i ght alloy materials with low installation torque and high stripping torque.
www.psminternational.com Version 1008
TMS SERIES
TMA SERIES
DIRECT SCREW FIXINGSTMP SERIES
TMP-01
REDUCED INSTALLATION TORQUE.HIGH STRIPPING TORQUE.GREATER SAFETY MARGIN BETWEEN INSTALLATION TORQUE AND STRIPPING TORQUE.HIGH PARENT MATERIAL SHEAR STRENGTH.MINIMISES MATERIAL FLOW RESISTANCE.DES IGNED TO REDUCE STRESS WITHIN THE THERMOPLASTIC TO AN ABSOLUTE MINIMUM.HIGH RESISTANCE TO VIBRATION AND RELAXATION.ALLOWS FOR SMALLER BOSSES.
The TMP SERIES is a range of direct screw fasteners for use in thermoplastics. The key design aspects include a profiled thread root
to assist plastic flow, a 30° flank angle to reduce boss bursting forces and an 8° pitch angle which combine to give low installation torques with high stripping torques. For those applications not requiring the high levels of thread re-use and high clamping torque, (properties associated with threaded inserts) TMP screws offer an economical solution to plastics assembly and has distinct advantages over other direct screw fixings.
ADVANTAGES
The specialised equipment necessary to measure the effect of these factors is available at PSM's Technology Centres.This allows customers to obtain the best design possible.Pre-production testing is therefore strongly recommended.Please note the inclusion of a counterbore - this is important for the following reasons:
- Prevents damage to the top of the boss- Helps alignment of the screw in the boss- Assists in repeated assemblies of the screw- Acts as a relief for any material extruded to the head of the screw and allows flush finishes.
N.B. If moulded tool design or application into an existing boss renders the recommended boss design impractical,
please contact PSM for specific advice.
When choosing a direct screw fixing one of the major criterium is to obtain the maximum margin between driving torque and stripping torque. Screw design, material characteristics, moulding practice, hole size and installation speed all have an influence.
www.psminternational.com
Recommended Boss Design
d = Nominal External Thread Dia.Hole Taper 1° inclusive
d+0.2mm0.5d
HoleDiameter
(Measured atmid-point ofscrewpenetrationdepth)
Scre
w P
enet
rati
onD
epth
Boss Diameter
Version 1008
DESIGN GUIDE
8° OPTIMUM PITCH ANGLE DESIGN RECOMMENDATION
Lowest installation torque/highest stripping torqueMaximum resistance to vibration loosening and material relaxation in the component
DIRECT SCREW FIXINGS TMP SERIES
TMP-02
PROFILED THREAD ROOT
8°
Improved plastic flow reduces stress, providing long term reliabilityGreater surface area contact between screw thread and plastic, to give a high shear and stripping torqueLower installation torques
30° COMBINED FLANK ANGLE
Lower radial stresses, reducing boss bursting forceGreater thread penetration into the plastic material, permitting enhanced clamping torqueLower installation torquesReduced centre of pressure, producing lower installation torque
Resolution of Resultant Forces for the Same Volume Displacement
F Rad 1 = 0.500R F Rad 2 = 0.259RF Axi 1 = 0.867R F Axi 2 = 0.966R
ABSABS/PC BlendASAPA 4.6PA 4.6 - GF 30PA 6PA 6 - GF 30PA 6.6PA 6.6 - GF 30PBTPBT - GF 30PCPC - GF 30
2d2d2d
1.85d1.85d1.85d
2d1.85d
2d1.85d1.8d2.5d2.2d
2d2d2d
1.8d1.8d1.7d1.9d1.7d1.8d1.7d1.7d
2.2d*2.0d*
MATERIAL
0.8d0.8d
0.78d0.73d0.78d0.75d0.8d
0.75d0.82d0.75d0.8d
0.85d0.85d
HoleDiameter
BossDiameter
Min. ScrewPenetration
Depth
For other materials contact PSM.
* Where materials are known to be sensitive to environmental stress cracking, ageing tests should be carried out as recommended by the material manufacturer.
60O Flank Angle V 30O Flank Angle
LDPEHDPEPETPET - GF30PMMAPOMPPPP-TF20PPOPSPVC(Hard)SANPPS
2d1.8d
1.85d1.8d
2d1.95d
2d2d
2.5d2d2d2d
MATERIAL
0.7d0.75d0.75d0.8d
0.85d0.75d0.7d
0.72d0.85d0.8d0.8d
0.77dComtact PSM
HoleDiameter
BossDiameter
Min. ScrewPenetration
Depth
2d1.8d1.7d1.7d
2d2d2d2d
2.2d*2d2d
1.9d
d = Nominal External Thread Diameter.
DESIGN FEATURES
Flat Root thread v TMP Profiled Root thread
Material flow restrictedHelpsmaterial flow
Thread RootThread Root
Hole Hole
Mat
eria
l flo
w
Mat
eria
l flo
w
60°
30°
30° 15°
Area 1 Area 2
F Rad 1 F Rad 2
F Axi 1 F Axi 2
R1 R2
Area 1=Area 2
www.psminternational.com Version 1008
TMP-03
STANDARD MATERIALThrough Hardened & Tempered SteelSTANDARD FINISHESZinc Plate and Clear Passivation (Z)OTHER FINISHES– Available to order.
*** When ordering Case Hardened Screws specify SCREW TYPE code CTMP 14.
HOW TO SPECIFY
STANDARD RECESS STYLES- Other available recesses are shown on page DSF-02.
A PHILLIPS B POZI C 6-LOBE
SIZE RANGE
DIMENSIONS
TMP SCREWS K 18 K 22 K 25 K 30 K 35 K 40 K 50 K 60 K 70 K 100
Length 'L' (mm)
Nominal Ø(mm) 1.80 2.20 2.50 3.00 3.50 4.00 5.00 6.00 7.00 10.00
4 ± 0.385 ± 0.386 ± 0.387 ± 0.458 ± 0.4510 ± 0.4512 ± 0.5514 ± 0.5516 ± 0.5518 ± 0.5520 ± 0.6525 ± 0.6530 ± 0.6535 ± 0.8040 ± 0.8050 ± 0.8060 ± 0.9570 ± 0.9580 ± 0.9590 ± 0.95100 ± 0.95
SCREW TYPE***HEAD STYLERECESS CODETHREAD DIAMETERLENGTH OF SCREWFINISH
TMP1412-KB30x10-ZTMP1412-KB30x10-ZTMP1412-KB30x10-ZTMP1412-KB30x10-ZTMP1412-KB30x10-ZTMP1412-KB30x10-Z
Head Style 13 L min=Lmin + 2.0mm
Nominal Diameter K18 K22 K25 K30 K35 K40 K50 K60 K70 K80 K100
PRODUCT CODETMP 14
External Thread d 1.8 2.2 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 10.0Thread Root R 1.04 1.25 1.40 1.66 1.91 2.17 2.68 3.19 3.70 4.21 5.23 Thread pitch P 0.80 0.98 1.12 1.34 1.57 1.79 2.24 2.69 3.14 3.59 4.49
HEAD STYLE11 Pan Flange
Head diameter HD 4.4 5.0 6.0 7.0 8.0 10.0 12.0 14.0 Head height HD 1.6 1.8 2.1 2.4 2.5 3.2 4.0 4.6 Flange thickness S 0.5 0.6 0.7 0.8 0.9 1.1 1.3 1.5 A PHILIPS Driver No. PH1 PH1 PH1 PH2 PH2 PH2 PH3 PH3 B POZI Driver No. PZ1 PZ1 PZ1 PZ2 PZ2 PZ2 PZ3 PZ3 Head diameter HD 4.5 5.0 6.0 7.0 8.0 10.0 12.0 14.0 16.0 20.0Head height H 1.4 1.5 2.1 2.4 2.6 3.3 3.6 4.2 4.8 5.5Washer thickness S 0.5 0.5 0.6 0.7 0.8 1.0 1.2 1.4 1.5 2.0C 6-LOBE Driver No. T6 T6 T10 T10 T20 T20 T25 T30 T40 T40Screw Length>3d X 1.8 2.2 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 10.0Screw Length≤3d X 0.9 1.1 1.3 1.5 1.8 2.0 2.5 3.0 3.5 4.0 5.0
HEAD STYLE12 Pan.
Head diameter HD 3.2 3.9 4.4 5.3 6.1 7.0 8.8 10.5 12.3 Head heiight H 1.2 1.5 1.7 2.0 2.5 2.7 3.4 4.0 4.5 A PHILIPS Driver No. PH0 PH1 PH1 PH1 PH2 PH2 PH2 PH3 PH3 B POZI Driver No. PZ0 PZ1 PZ1 PZ1 PZ2 PZ2 PZ2 PZ3 PZ3 Head diameter HD 3.6 4.0 4.2 5.6 6.9 7.5 8.2 10.8 12.5 14.0 16.0Head height H 1.3 1.0 1.6 2.1 2.3 2.8 2.9 3.8 4.4 5.0 6.0C 6-LOBE Driver No. T6 T6 T7 T10 T10 T20 T20 T25 T30 T40 T40Screw Length>3d X 1.8 2.2 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 10.0Screw Length≤3d X 0.9 1.1 1.3 1.5 1.8 2.0 2.5 3.0 3.5 4.0 5.0
HEAD STYLE13 Countersunk
Head diameter HD 3.0 3.8 4.7 5.5 7.3 8.4 9.3 11.3 13.6 Cylinder head height F 0.20 0.25 0.45 0.45 0.55 0.60 0.65 0.75 0.80 A PHILIPS Driver No. PH0 PH1 PH1 PH1 PH2 PH2 PH2 PH2 PH3 B POZI Driver No. PZ0 PZ1 PZ1 PZ1 PZ2 PZ2 PZ2 PZ2 PZ3 Head diameter HD 3.4 3.8 4.7 5.5 7.3 8.4 9.3 11.3 13.6 15.8 18.3 C 6-LOBE Driver No. T6 T6 T8 T8 T15 T20 T20 T30 T40 T40 T50Screw Length>3d X 1.8 2.2 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 10.0Screw Length≤3d X 0.9 1.1 1.3 1.5 1.8 2.0 2.5 3.0 3.5 4.0 5.0
HD
H
S
Rd
P
L
30°
X
HD
H
L
L
HDF
90°
X
www.psminternational.comVersion 1008
ASSEMBLY DATA RECOMMENDED INSTALLATION TOOL SPEEDS
To determine the optimum performance of direct screw fixings there are a number of influential factors which have to be considered if problems on the production line or in service are to be avoided. In order to establish the optimum clamping torque it is first necessary to establish the following:
1 Amount of torque required to form the first thread2 The amount of torque required for the screwhead to come into contact with the mating component.3 The amount of torque required for the joint to fail.
These figures should be obtained by the use of specialised equipment which simulates production line conditions since testing by hand omits the important effect of friction due to installation speed.PSM's Technology Centres are fully equipped to conduct these tests for you.
The repeat torque accuracy of the installation tool can vary and should always be considered when specifying the recommended clamping torque.
DIRECT SCREW FIXINGSTMP SERIES
TMP-04
The speed at which screws are installed should be carefully considered - speeds which are too high can destroy the material into which the screws are being driven.
Although a speed of 600rpm is recommended for most materials, pre-production testing and consultation with PSM should be undertaken for optimum results.
1 2 3
Screw head incontactwith material
Joint Clamping
Thread Friction
ThreadFormingTorque
Screw Penetration Depth
Installation Torque
Stripping Torque
Torq
ue
Ts
T1
1
2
3
www.psminternational.com Version 1008
DIRECT SCREW FIXINGSTMS SERIES
TMS-01
ADVANTAGES
REDUCES STRESS IN THERMOSETTING PLASTICS TO AN ABSOLUTE MINIMUM.
WIDE SAFETY MARGIN BETWEEN INSTALLATION AND STRIPPING TORQUE.
SUITABLE FOR ALL TYPES OF THERMOSETTING PLASTICS.
CAN BE USED IN THERMOPLASTICS WITH A HIGH FILL CONTENT.(>30%)
The TMS Series is a range of direct screw fasteners for use in thermosetting plastics.
The design incorporates many unique features which provide designers with a really effective direct screw fixing for these materials. The cutting notch combined with the profiled threadroot and special thread form provides low installation and highstripping torques.The efficient removal of cutting debris ensures greatly reduced bursting forces, providing the solution to a common problem associated with conventional self tapping screws, when used in thermosets.
www.psminternational.comVersion 1008
SPECIAL CUTTING NOTCH
Removes 60-80% of material cut during the thread cutting operation
Reduces installation torque
Reduces radial pressure
DIRECT SCREW FIXINGSTMS SERIES
TMS-02
SPECIAL PROFILED ROOT
Provides space for debris
Reduces radial stress
Reduces installation torque
Increases stripping torque
SPECIAL SHAPED TOOTH
Reduces radial stress
Maximum surface bearing area
High stripping torque
High clamping force
High back-off torque
30
DESIGN GUIDE
BOSS DESIGN DEPENDS ON THE FOLLOWING FACTORS:- Type of thermoset material used- The density of the material- The amount and type of fillerBecause of these variables the following recommendations are minimum and maximum guidelines only.
Minimum Maximum
HOLE DIAMETER
BOSS DIAMETER
SCREWPENETRATION
DEPTH
0.85 x d 0.88 x d
2.5 x d
2.0 x d
3.0 x d
3.0 x d
FOR SPECIFIC APPLICATION ADVICE,CONTACT P.S.M.
Recommended Boss DesignBoss Diameter
d = Nominal External Thread Dia.Hole Taper 1° inclusive
Scre
wPe
netr
atio
nD
epth
HoleDiameter
d+0.2mm0.5d
120°
0.5d
Chip Space
(Measured atthe midpoint
ofscrew
penetrationdepth)
www.psminternational.com Version 1008
TMS-03
STANDARD MATERIALThrough Hardened & Tempered Steel
STANDARD FINISHESZinc Plate and Clear Passivation (Z)
OTHER FINISHES– Possible on quotation.
*** When ordering Case Hardened Screws specify SCREW TYPE code CTMS 17.
HOW TO SPECIFY
STANDARD RECESS STYLES- Other available recesses are shown on page DSF-02.
A PHILLIPS B POZI C 6-LOBE
SIZE RANGE
DIMENSIONS
TMS SCREWS K 22 K 25 K 30 K 35 K 40 K 50 K 60 K 80
Length 'L' (mm) Nominal Ø (mm) 2.20 2.50 3.00 3.50 4.00 5.00 6.00 8.00
5 ± 0.386 ± 0.387 ± 0.458 ± 0.4510 ± 0.4512 ± 0.5514 ± 0.5516 ± 0.5518 ± 0.5520 ± 0.6525 ± 0.6530 ± 0.6535 ± 0.9040 ± 0.9050 ± 0.9060 ± 0.9570 ± 0.9580 ± 0.95
Nominal Diameter K22 K25 K30 K35 K40 K50 K60 K80
PRODUCT CODETMS 17
External Thread d 2.2 2.5 3.0 3.5 4.0 5.0 6.0 8.0Thread Root R 1.59 1.81 2.18 2.56 2.93 3.68 4.42 5.91Thread pitch P 0.71 0.77 0.86 0.95 1.04 1.23 1.42 1.79
HEAD STYLE42 Pan
Head diameter HD 4.0 5.0 6.0 7.0 8.0 10.0 12.0 16.0Head height H 1.6 2.0 2.4 2.7 3.1 3.8 4.6 6.0
A PHILIPS Driver No. PH1 PH1 PH1 PH2 PH2 PH2 PH3 PH4
B POZI Driver No. PZ1 PZ1 PZ1 PZ2 PZ2 PZ2 PZ3 PZ4
Head diameter HD 4.0 5.0 6.0 7.0 8.0 10.0 12.0 16.0
Head height H 1.6 2.0 2.4 2.7 3.1 3.8 4.6 6.0
C 6-LOBE Driver No. T6 T8 T10 T15 T20 T25 T30 T40
Plain Section X MAX. 1.1 1.3 1.5 1.8 2 2.5 3 4
HEAD STYLE43 Countersunk
Head diameter HD 3.8 4.7 5.6 6.5 7.5 9.2 11.0 14.5Cylinder head height F 0.25 0.45 0.45 0.45 0.55 0.65 0.75 0.80A PHILIPS Driver No. PH1 PH1 PH1 PH2 PH2 PH2 PH3 PH4B POZI Driver No. PZ1 PZ1 PZ1 PZ2 PZ2 PZ2 PZ3 PZ4Head diameter HD 3.8 4.7 5.5 7.3 8.4 9.3 11.3 15.8Cylinder head height F 0.25 0.45 0.45 0.55 0.6 0.65 0.75 0.85C 6-LOBE Driver No. T6 T8 T10 T15 T20 T25 T30 T40Plain Section X MAX. 1.1 1.3 1.5 1.8 2 2.5 3 4
HD
H
X
Rd
P
L
HD
90 °
F
X L
SCREW TYPE***
HEAD STYLE
RECESS CODE
THREAD DIAMETER
LENGTH OF SCREW
FINISH
TMS1742-KB30x10-Z
TMS1742-KB30x10-Z
TMS1742-KB30x10-Z
TMS1742-KB30x10-Z
TMS1742-KB30x10-Z
TMS1742-KB30x10-Z
Head Style 43 L min=Lmin + 2.0mm
www.psminternational.comVersion 1008
DIRECT SCREW FIXINGSTMA SERIES
ADVANTAGES
THREAD FORMING - NO DEBRISRELIABLE & EASY INSTALLATION INTO PUNCHED, DRILLED, EXTRUDED & MOULDED HOLESRE-USABILITY OF SCREW
The TMA Series is a range of direct screw fasteners for use in light alloys. The design incorporates many unique features which provide
designers with a really effective direct screw fixing for these materials.
The profiled thread root gives low installation torque whilst the special thread form provides high stripping torque.
SPECIAL PROFILED ROOTReduces stressAl lows mater ia l to f low during thread formingReduces installation torqueIncreases stripping torqueIncreases pull-out load
TMA-01
SPECIAL SHAPED TOOTH
Reduces radial stressMaximum surface bearing areaHigh stripping torqueHigh clamping forceHigh back-off torque
30°
DESIGN GUIDE
SoftMaterials
MediumSoft Materials
HardMaterials
HOLE DIA.
MINIMUM BOSSDIAMETER
MINIMUM SCREWPENETRATION
MAXIMUM SCREWPENETRATION
0.94 x d 0.92 x d 0.90 x d
2.5 x d
2.5 x d
1.5 x d
2.5 x d
2.5 x d
1.5 x d
2.5 x d
2.5 x d
1.5 x d
DESIGN GUIDE
Recommended Boss DesignBoss Diameter
d = Nominal External Thread Dia.Hole Taper 1° inclusive
Scre
wPe
netr
atio
nD
epth
HoleDiameter
d+0.2mm0.5d
120°
(Measured atthe midpoint
ofscrew
penetrationdepth)
SOFT MATERIALS = ≤50 VPN
MEDIUM SOFT MATERIALS = 51 TO 75 VPN
HARD MATERIALS = 76 TO 100 VPN
FOR SPECIFIC APPLICATION ADVICE, CONTACT P.S.M.
Hole Diameter
Punching Direction= Drive in Direction
HoleDiameter
PUNCHED HOLEEXTRUDED HOLE
www.psminternational.com Version 1008
TMA-02
STANDARD MATERIALThrough Hardened & Tempered Steel
STANDARD FINISHESZinc Plate and Clear Passivation (Z)
OTHER FINISHES– Possible on quotation.
*** When ordering Case Hardened Screws specify SCREW TYPE code CTMA 15.
HOW TO SPECIFY
STANDARD RECESS STYLES- Other available recesses are shown on page DSF-02.
A PHILLIPS B POZI C 6-LOBE
SIZE RANGE
DIMENSIONS
TMA SCREWS K 22 K 25 K 30 K 35 K 40 K 50 K 60 K 80
Length 'L' (mm) Nominal Ø (mm) 2.20 2.50 3.00 3.50 4.00 5.00 6.00 8.00
5 ± 0.386 ± 0.387 ± 0.458 ± 0.4510 ± 0.4512 ± 0.5514 ± 0.5516 ± 0.5518 ± 0.5520 ± 0.6525 ± 0.6530 ± 0.6535 ± 0.9540 ± 0.9550 ± 0.9560 ± 0.9570 ± 0.9580 ± 0.95
Nominal Diameter K22 K25 K30 K35 K40 K50 K60 K80
PRODUCT CODETMA 15
External Thread d 2.2 2.5 3.0 3.5 4.0 5.0 6.0 8.0Thread Root R 1.59 1.81 2.18 2.56 2.93 3.68 4.42 5.91Thread pitch P 0.71 0.77 0.86 0.95 1.04 1.23 1.42 1.79
HEAD STYLE42 Pan
Head diameter HD 4.0 5.0 6.0 7.0 8.0 10.0 12.0 16.0
Head height H 1.6 2.0 2.4 2.7 3.1 3.8 4.6 6.0
A PHILIPS Driver No. PH1 PH1 PH1 PH2 PH2 PH2 PH3 PH4
B POZI Driver No. PZ1 PZ1 PZ1 PZ2 PZ2 PZ2 PZ3 PZ4
Head diameter HD 4.0 5.0 6.0 7.0 8.0 10.0 12.0 16.0
Head height H 1.6 2.0 2.4 2.7 3.1 3.8 4.6 6.0
C 6-LOBE Driver No. T6 T8 T10 T15 T20 T25 T30 T40
Plain Section X MAX. 1.1 1.3 1.5 1.8 2 2.5 3 4
HEAD STYLE43 Countersunk
Head diameter HD 3.8 4.7 5.6 6.5 7.5 9.2 11.0 14.5Cylinder head height F 0.25 0.45 0.45 0.45 0.55 0.65 0.75 0.80A PHILIPS Driver No. PH1 PH1 PH1 PH2 PH2 PH2 PH3 PH4B POZI Driver No. PZ1 PZ1 PZ1 PZ2 PZ2 PZ2 PZ3 PZ4Head diameter HD 3.8 4.7 5.5 7.3 8.4 9.3 11.3 15.8Cylinder head height F 0.25 0.45 0.45 0.55 0.6 0.65 0.75 0.85C 6-LOBE Driver No. T6 T8 T10 T15 T20 T25 T30 T40Plain Section X MAX. 1.1 1.3 1.5 1.8 2 2.5 3 4
HD
H
X
Rd
P
L
HDF
90°
X L
SCREW TYPE***
HEAD STYLE
RECESS CODE
THREAD DIAMETER
LENGTH OF SCREW
FINISH
TMA1542-KB30x10-Z
TMA1542-KB30x10-Z
TMA1542-KB30x10-Z
TMA1542-KB30x10-Z
TMA1542-KB30x10-Z
TMA1542-KB30x10-Z
www.psminternational.comVersion 1008
DIRECT SCREW FIXINGSALL SERIES
OPTIONAL FEATURES
OTHER AVAILABLE RECESSES
DSF-02
SPECIAL VARIATIONS
Ratchet Head Head withhollow groove
Pilot Point Cone Point Dog Point
PH Combination Recess (AL)
Tamper Proof
PZ CombinationRecess (BL)
Combination6-LOBE
SlottedCheese Head
SlottedPan Head
SlottedCountersunk
DoubleEnded Stud
SlottedShoulder Screw
HexHead
HexFlange
Captive ClawWasher
www.psminternational.com Version 1008
While this catalogue focuses primarily on Direct Screw Fixings, PSM International is also a market leader in Inserts for Plastics and other assembly components. If you do not see exactly what you are looking for, please contact PSM International – we would be happy to review your application and propose a solution.
http://www.psminternational.com
Wherever you are PSM can support you with...Global Sales Offices
Market Leading Applications EngineeringState of the Art Technical Centers
Rapid PrototypingComplete Product Line
Inserts for Plastics
Sheet Metal fasteners
Direct Screw fixings
fasteners for Special Materials
Spring Steel & Special components
The application of plastics in engineering design is on the increase, which is why we offer the widest selection of inserts for plastics and every installation technique.Our applications Engineers are on hand to help you choose the most suitable fastener for your specific requirements, can offer pre-production test facilities and provide accurate performance data for your particular installation conditions.
Self-clinching fasteners for sheet metal provide deep tapped female threads or studs for use in conjunction with thin sheet metallic materials.Permanently attached to the parent material they allow the associated nut or bolt to be removed in service, without risk of the fastener becoming dislodged.This feature has already enabled a range of industries to streamline production methods and to fabricate complex shapes such as closed box sections.
Direct Screw Fixings are a fast, economical, production line solution for fixing plastic and light alloy components recommended where the need for re-use and high assembly torque are not major considerations.The range's unique thread forms have been engineered to maximise the advantages of Direct Screw Fixings.The range includes forming screws for thermoplastics/light alloy materials and cutting types for use with thermosetting materials.
The success of new materials is often dependent on the ability to devise methods of fixing and fastening. This is particularly true of mechanical fastening systems that allow dismantling for adjustment, servicing or repair. The fasteners shown here have been designed to meet the needs of designers who require the strength of a steel thread when using lightweight alloys such as magnesium and resin-based printed circuit boards.
P.S.M International's range of spring steel purpose designed pressings offer designers unique, cost effective fasteners include simple lineside assembly, multi-functional capability, high strength to weight performance and ability to assemble multi material types.
Head OfficeUNITED KINGDOM
PSM INTERNATIONAL LIMITED14 Barton Industrial Park, Etruria Way,
Mount Pleasant, Bilston, Wolverhampton,
WV14 7 LH, UK
Tel: (+44) 1902 407 370
Fax: (+44) 1902 407 380
Mail: info@psminternational.com
PSM INTERNATIONAL LIMITEDUnit 4, Alpha Centre, Rothsay Dock,
Clydebank, Strathclyde, G81 1YP SCOTLAND
Tel: (+44) 141 951 1626
Fax: (+44) 141 951 1627
Mail: info@psminternational.com
Joint VenturesITALY
PSM CELADA FASTENERS S.R.LVia Porpora 24, 20131 Milano, ITALY
Tel: (+39) 02 2940 0630
Fax: (+39) 02 2951 4888
Mail: Commerciale@psmcelada.it
SWEDENPSM FASTENERS ABP.O.Box 550,175 26 Jarfalla, SWEDEN
Tel: (+46) 828 2815
Fax: (+46) 829 1414
Mail: Info@rpab.se
EUROPE
USA
PSM FASTENER CORPORATION12223 C.R.Koon Highway, Newberry,
South Carolina 29108, U.S.A.
Tel: (+1) 803 321 1300
Fax: (+1) 803 364 7377
“Toll Free” number : (+1) 800 526 1886
Mail: sales@psminternational.com
ASIA PACIFIC
Joint VenturesAUSTRALIA
PSM FASTENERS(PTY) LIMITED159-163 Victoria Road, Marrickville,
New South Wales 2204, AUSTRALIA
Tel: (+61) 2 9560 7244
Fax: (+61) 2 9569 8441
Mail: Fasteners@bigpond.com
JAPANJAPAN PSM CO., LTD.8-10 Denenchofu Minami, OHTA, Tokyo 145 JAPAN
Tel: (+81) 3 3756 7227
Fax: (+81) 3 3750 2200
WORLDWIDE MANUFACTURING SITESWUXI
PSM FASTENERS (WUXI) CO.LTD.Wuxi-Singapore Industrial Park No.21, Xi Kun Road
Jiang Su, P.R. CHINA, 214028
Tel: (+86) 510 8527 0888
Fax: (+86) 510 8528 2903
TAIWAN PSM FASTENERS (TAIWAN) LTD.No. 17, Lane 180, Nanyang Street, Shijr City,
Taipei, TAIWAN, R.O.C
Tel: (+886) 2 2694 5378
Fax: (+886) 2 2694 5554
Mail: Taiwan@psmpacific.com
TECHNOLOGY CENTRESP.S.M INTERNATIONAL LIMITED14 Barton Industrial Park, Etruria Way,
Mount Pleasant, Bilston, Wolverhampton,
WV14 7 LH, UK
Tel: (+44) 1902 407 370
Fax: (+44) 1902 407 380
P.S.M FASTENERS (ASIA) LTD.No. 17, Lane 180, Nanyang Street, Shijr City,
Taipei, TAIWAN, R.O.C
Tel: (+886) 2 2694 5378
Fax: (+886) 2 2694 5554
Mail: Taiwan@psmpacific.com
P.S.M FASTENERS (WUXI) CO., LTD. Wuxi-Singapore Industrial Park No.21, Xi Kun Road
Jiang Su, P.R. CHINA
Tel: (+86) 510 8527 0888
Fax: (+86) 510 8528 2903
PSM Sales OfficeSHANGHAI
PSM FASTENERS SHANGHAI21G Orient InternationalScience & Technology Building, No. 58 Xiang Cheng Road, Pudong, Shanghai P.R. CHINA 200122Tel: (+86) 21 6840 6515 Fax: (+86) 21 6840 6519Mail: Shanghai@psmpacific.com
SUZHOUPSM FASTENERS SUZHOUNo. 1710B Huilong Gate,China Bank Building, Suzhou road, Suzhou Industrial Park,Suzhou, P.R. CHINA 215021Tel: (+86) 512 6299 8650 Fax: (+86) 512 6299 8651
SHENZHENPSM FASTENERS SHENZHENUnit 2601, Block C, World Trade Plaza, Fuhong Road,Futian District, Shenzhen, P.R. CHINA 581033Tel: (+86) 755 8377 8417 Fax: (+86) 755 8377 8415Mail: Shenzhen@psmpacific.com
TIANJINPSM FASTENERS TIANJINRoom 2506,Golden Emperor Building,20 Nanjing Road, Hexi District,Tianjin, P.R. CHINA 300042Tel: (+86) 22 2312 6603 Fax: (+86) 22 2312 6609Mail: Tianjin@psmpacific.com
BEIJINGPSM FASTENERS BEIJINGRoom 1211,Beijing Silver Tower,No.2 Dongsanhuan North Road,Chaoyang District,Beijing, P.R. CHINA 100027Tel: (+86) 10 6410 7006/08/09 Fax: (+86) 10 6410 7005Mail: Beijing@psmpacific.com
HONG KONGP.S.M FASTENERS (HONG KONG) Unit 1908, Westley Square 48 Hoi Yuen Road, Kwun Tong, Kowloon, HONG KONGTel: (+852) 2652 5051 Fax: (+852) 2652 5056Mail: Hongkong@psmpacific.com
SINGAPORE P.S.M FASTENER (SINGAPORE) PTE LTD.100E Pasir Panjang Road, #04-05 Century Warehouse, SINGAPORE 118521Tel: (+65) 6278 8141Fax: (+65) 6278 8142 Mail: Singapore@psmpacific.com
TAIWAN PSM FASTENERS (TAIWAN) LTD.No. 17, Lane 180, Nanyang, Street, Shijr City, Taipei, TAIWAN, R.O.CTel: (+886) 2 2694 5378Fax: (+886) 2 2694 4976 Mail: Taiwan@psmpacific.com
www.psminternational.com
Wherever you are...
we have the solution!
top related