ESS ESS KAY ENGG. CO. LTD, kapurthala.ppt
Post on 04-Jan-2016
240 Views
Preview:
DESCRIPTION
Transcript
1
Six Months Industrial Training Report Dec. -- May
ESS ESS KAY CO. LTD.Post Box no-8, Factory area, Kapurthala (ISO 9001:2000)
Submitted by: -SAVYASACHI 90210718927 B.Tech, EEE 2009 - 2013
2
INTRODUCTION TO COMPANY
3
MAIN DEPARTMENTS
• Sheet metal shop• Paint shop• Electroplating shop• Moulding shop • Switchgear assembly Shop• Panel shop• Quality assurance department/Test Labs
4
SHEET METAL SHOP/DEPARTMENTC.R.C.A sheet (ESSAR STEEL INDIA LTD.)
(60 sheets, Wt. 2.8MT,(2/1.5*1250*2500mm)
Shearing Machine(Mechanical cutter)
(HH, 415V, 6200kg,6mm,3Φ,working area 3100mm)Bending machine
(HH,415V,8700kg,6mm,w.a.3100mm,10 ton, DELEM)
(AMADA,5100kg,w.a.2505mm,80 ton)Punching machine
(VIPROS 225,9800kg,50-60hz,196KN,27kva)
(HH, 3Φ,9000kg,2000KN,415V,3.8A,DELEM)
5
Welding machine(Sunrise , Spot/Projection,pf-0.4,415V,50hz,3Φ,1.5litre)
(MIG welding, copper electrode)
(Gas welding, O2,Acetylene)
Drilling machine
(Sunrise,pf-0.6,415V,50-60hz,3Φ)
Power press
(Sunrise,415V,50-60hz,pf-0.4,3Φ,14.gauge2100Kg)
(18.gauge,2300Kg)(20 gauge,2500Kg)
6
PAINT SHOP/DEPARTMENT
Power Coating Gun
(Based on electrostatic charging,0.5-1A,230V) Paint Process Phosphating
(Degreasing Tank- Caustic soda & Soda ash,10 PH,75-850C,10min)
(Derusting Tank-Acid,1 PH,50-600C,5min)
(Phosphating Tank- Zinc Phosphate,1 PH,30-350C,3min)
(Water rinsing Tank- Water,7 PH,270C,1min)
7
Painting(Coating) (2 pipes,-vely charged powder, +vely charged body) (Thermoplastic/Thermoses polymer )
(NUT WHITE SEMI GLOSSY) Baking (182-2200C, 4-5A, 350V, 55μns layer, 15min)
Sealing (Sodium dichromate,4 PH ,70-800 C, 5min)
Test Applied After Coating the Body
o Scratch Test:- (with cello tape)
o Bend Test:- (bend it up to 900)
8
ELECTROPLATING SHOP Types Of Electroplating• Acid Zinc Electroplating (for ‘Iron’)
(24-270C, 9-12V,15μns, Anode:- Zinc, Cathode:- Iron)
• Acid Tin Electroplating(for ‘Brass’)
(24-270C, 5-8V,12μns, Anode:-Tin, Cathode:- Brass )• Silver Electroplating(for Brass & Cu)
(24-270C, 1.5V,4μns, Anode:- Silver, Cathode:-Brass or Cu)• Copper Electroplating (for ‘mild steel’)
(500C, 7-8V,6ns,Anode:-Cupper, Cathode:-Steel) Inspection• Coating Thickness• Surface Finish
9
MOULDING SHOP
Raw Materials• (Polycarbonate resin/granules,
Heated at 400C in preheater
then fed to barrel of Molding machine)• PBT:- used in high rating switch & socket.
(high tensile strength due to glass fibre) Moulding Machine
(L & T, 5000*1400*2000mm,
locking force-440KN,
Ejection force-28KN,
Oil tank-180L,
Injection pressure -50bar,
415V, 3Φ, 0.45pf, 50-60hz)
10
Molds/Dye
(Mainly frames, Two plates, injection mold, ejector mold, silicon spray for
cooling)
All types of frames of household electrical accessories are prepared by this type of machine by changing Dye.
e.g. Batten holder, Ceiling rose, Sockets, Switches, Regulators, Bell push,switch socket combined, Plugs, Indicator, Telephone jack, Angle lamp holder, TV socket, Computer jack, foot light, cage frame. e.t.c
11
Waste Grinder Machine
Dharma engg. works,
Size of grinder :- 9”
Size of blade :- 6*4
Connecting load :- 5HP
Max o/p :- 50-70 kg
Voltage 415V
Current rating;- 1.5-2A
Frequency:- 50-60hz
phase:- 3
Wt of machine:- 2400kg
12
13
SWITCHGEAR ASSEMBLY SHOP
Rewirable Fuse & HBC fuse• Base:- Porcelain, Bakelite• Contacts:-Electrolytic copper
Silver plated• Screw:-Brass• Screw insulating material:- Wet ceramic Cubicle Fuse Switch
Fuses are placed in enclosure.
Range :16-100A
No of poles :SPN,DP,TPN
Rated voltage :240,415V
Insulation Voltage: 660V
14
Metal clad plugs & sockets Molded Polyester compound,Deep recessed socket contact tubes & surrounded plug pins to avoid accidental contacts.Range 1.5A,3A,6A/230V
Cubical Isolator Switch Range 16A to 200A,220v-415V Poles:- SP, DP, TP, TPN
Double Break Switch Fuse Incoming supply can either be connected Top & Bottom Range : 63 – 400A Poles : TP,TPN,FP
15
Change over switch 63 A, 415 V
Asbestos sheet
Metal clad change over switch
range:- 32A- 200A
220V-415V
TPN
Insulated Iron rod Bakelite case
16
Element names of change over
Silver cupper bimetal rivets
Wooden block
Holding spring
Brass clamp
17
TESTING LIST Heating Oven Test
for switches & holders
kept on 800C for 8hrs. Mechanical Strength test
for lamp holders
1 kg wt. hanged for hrs. Tumbling barrel test
checks mech. Strength of plug socket.
wire tightened to socket & whole
combination is put in tumbling barrel,
it revolves & mechanical strength is checked
18
Endurance test for switches
general operation 4000 times
in test lab 3 times more i.e. 12000 operations
Ampere test
tested for 6A when rating is 2A
30 sec
Conditional Wire test
cu wire, placed at 150C.
1 min.
twisted & checked for cracks
19
Short circuit test for change over
done at 3KV-4KV.
contacts are touched for 5 sec.
0KV shows short circuit.
Milli volt drop test
done for checking gap b/w
contacts while closed
Making & Breaking Capacity
tested at 130% of rated current
& 110% at rated voltage.
500 operations, interval 30 sec.
20
SSK COOL PACK AC SYSTEM
• Capacity-1 ton
• Temp range:- 100C to 450C
• Refrigerant :- R22,400 gm
• Voltage 230VA, 50HZ, 3.5 FLA
21
PANEL SHOP
Assembling of Panel for AC coach of Indian railways. Enclosure or Cabinet a/c to design.
Wire needed near about 6Km in one panel 70 sq mm, 2.5 sq mm for dc, 1.5 sq mm for acClipping tool(multi cutter) clipping of wire is done range 1.5mm-6mmWire Ducts (Halogen free pvc material)
22Outer Left side of panel
shell type(3 phase, p-750V,s-415-110V,0.3kva)
core type(1 phase, p-750V,s-24V, 200va)
Residual Current transformers 690V- 12KV
ACB(ABB company) 4 pole, 7 NO/NC, for relay operation, 800A, 415V, 50/60 hz
AEL(Alternator earth leakage) operating voltage:- 110V
Contactor (ABB Company) 415 V, 2 NO/NC
UVR(under voltage relay) 25VA@750V/AC/50Hz
23 Front view of panel
Pilot lights (indicators) operates at 24V
Buzzer 24 V dc, 96-104Db range:- 50m
Push buttons
Selector switch (4 way selector switch)
Ammeter(0-800A)
Voltmeter(0-800V)
Frequency meter 45-55Hz
Socomec kilowatt meter
kit Kat fuse (L & T, 32A,220V)
24
Inner view of panel
Wago terminals
OVR (over voltage relay)
DC Time Delay Relay
OSR(over speed relay)
LOP(low oil pressure)
AFR(alternator fault relay)
Bus bar (woehner)
Ground wire 70 sq mm, 100A
Generator protection relay current range(4.0-10.3A) max gen. voltage 1000V ac aux voltage 24 V dc
ATS(auto transfer switch)
25FINAL PRODUCT
26
Any Queries
top related