emi_lab

Haryana Institute of Technology EMI-1 lab

Haryana Institute of Technology(Approved by AICTE & Affiliated to MDU Rohtak)

ELECTRONICS & COMMUNICATION ENGINEERING DEPARTMENT

LAB REPORT(Electronics Measurement and Instrumentation)

NAME OF STUDENT _________________________________

ROLL No. _________________________________

SEMESTER _________________________________

SESSION _________________________________

STUDENT SIGNATURE_____________ FACULTY SIGNATURE ________________

This Guide is designed for helping the students to perform better in various practical Courses. It describes the structure of a good laboratory report, outlines the different

sections of the report and explains the need for each of them. It also introduces some

standard conventions and rules for writing reports of professional quality. The quality

of your written report will strongly affect your grade for the course.

EVALUATION OF PRACTICAL WORK

Each student will be required to perform the experiment individually.

Student will be required to write theory, algorithm, program, outputs etc. during

practical session itself.

Each experiment will be marked by the teacher on the basis of experiment

performed and write up on the same day. These marks will account for 40% of the

sessional marks.

Sessional marks will also include VIVA and Attendance marks as per rules.

GOOD LABORATORY PRACTICES

You must develop good laboratory habits by keeping complete laboratory notebooks.

Keep all your notes about the lab procedures and data in this notebook in pen. It is always better to read experiment in advance. The expectation is that you will work individually on separate computers. Each of

you will write a separate report. Please bring your lab manual to the lab on every turn.

THINGS TO DO AND DON’T DO IN THE LAB

DO’S Remember this is a practice lab & Keep silence.

Sit down in proper manner.

Lab instructor can help you to access software and printer.

If you require more in depth help you can ask concern lecturer

Proper shut down the computer system before leaving the lab.

Exit lab quickly, if short circuit or any emergency occurs.

You must entry when you enter and leave the lab.

DON’T Write any thing on the furniture.

Delete or change other student’s file.

Uninstall the any Software.

Inter change any Hardware.

Create, Change or remove any password.

Exhibit disruptive behavior.

Chatting and other banned sites.

Play computer games.

Eat and drink in Lab

EVALUATION REPORT

Sr. No.

Name of Experiment Date of Performance

Experiment Marks

Teacher’s Signature

1 Study blocks wise construction of a analog oscilloscope & Function generator

2 Measurement of dc motor by Electromagnetic pick up

3 Measurement of Strain using Strain Gauge

4 To measure the linear displacement by using inductive pick.

5 Study characteristics of Thermocouple

6 Study characteristics of Thermistor

7 Determine output characteristics of a LVDT and Measure displacement using LVDT

8 To study characterstic of platinium RTD

9 Measurement of displacement using capacitive pick up

10 To study light intensity measurement using photo register

Experiment No.:- 1 Date: - __/__/____

Aim Study blocks wise construction of a analog oscilloscope.

Apparatus Used:-

Theory:-

Diagram:-

Construction :-

Result:-

Viva Questions:

1. What is the function of storage mesh?

2. What is CRO?

3. What is the fuction of deflection plates ?

Faculty Signature……………. Date of Submission…………….

Aim Measurement of dc motor by Electromagnetic pick up

Apparatus Used:-

Theory:-

Diagram:-

Procedure:-

Observation:-

Precaution:-

Result:-

Viva Questions:

1. What is a LVDT?

3. What is Transducer?

2. On which axises time is measured?

Aim To Measurement pressure using Strain Gauge.

Apparatus Used:-

Theory:-

Diagram:-

Procedure:-

Observation:-

Precaution:-

Result:-

Viva Questions:

1. What is strain gauge?

2. In wire bound strin gauge,the change in resistance is due to which factor?

3. What are the application of unbounded strain gauge?

4. Explain different types of strain?

Aim To measure the linear displacement by using inductive pick.

Apparatus Used:-

Theory:-

Diagram:-

Procedure:-

Observation:-

Precaution:-

Result:-

Viva Questions:

1. what is the principle of self inductance?

Aim Study characteristics of Thermocouple

Apparatus Used:-

Theory:-

Diagram:-

Procedure:-

Observation:-

Precaution:-

Result:-

Viva Questions:

1. What is Thermocouple?

2. Which metal is in building the thermocouple?

3. What is the principle of thermocouple?

Aim To Study the characteristics of Thermistor

Apparatus Used:-

Theory:-

Diagram:-

Precaution:-

Result :-

Viva Questions:

1. What is Thermistor?

2. What is the difference between thermistor and thermocouple?

3. Draw the range of thermistor?

Experiment No.:-7 Date: - __/__/____

Aim Determine output characteristics of a LVDT and Measure displacement using LVDT

Apparatus Used:-

Theory:-

Diagram:-

Procedure:-

Observation:-

Precaution:-

Result :-

Viva Questions:

1. what is the principle of LVDT?

2. What is the value of voltage when core is in the center position?

3. In LVDT core is made up of which material?

Aim To study characterstic of platinium RTD

Apparatus Used:-

Theory:-

Diagram:-

Procedure:-

Observation:-

Precaution:-

Result:-

Viva Questions:

1 .What is RTD

Experiment No.:9 Date: - __/__/____

Aim Measurement of displacement using capacitive pick up

Apparatus Used:-

Theory:-

Diagram:-

Procedure:-

Observation:-

Precaution:-

Result:-

Viva Questions:

1. What is electric field?

2. Define Attenuator?

3. What is the function of buffer?

Aim To study light intensity measurement using photo register

Apparatus Used:-

Theory:-

Diagram:-

Procedure:-

Observation:-

Precaution:-

Result:-

Viva Questions:

1. What is the function of photoconductor?

2. What is the function of tacho generator.

emi_lab

lab procedures

practice lab

lab dos

lab manual

lab instructor

good laboratory report

measurement of displacement

separate report

Documents