EMC SMI-S Agent ETL for BMC Capacity Optimization€¦ · Release Notes v3.0.00 4 EMC SMI-S Agent ETL for BMC Capacity Optimization Version 3.0.00 Release Notes v3.0.00 What's New
Post on 01-Jun-2020
11 Views
Preview:
Transcript
User Documentation July 2013
EMC SMI-S Agent ETL for BMCCapacity Optimization
Version 3000
Table of Contents 2
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Table of Contents4Release Notes v3000
5Support Information
6Legal Notices
7Overview
9Supported Platforms and Versions
10Getting the Installation Package
11EMC SMI-S Agent
21Installing the ETL for BCO
24Configuring the ETL for BCO
28Disabling Enabling Volumes Monitoring
30Scheduling the Collect Frequency
32Setting the Data Saving Frequency
34Running the Extractor Service Task
37STOCONT Dataset Performance Metrics
38STOGLB Dataset Performance Metrics
43STOSSW Dataset Performance Metrics
44SYSDSK Dataset Performance Metrics
Introduction
4Release Notes v3000
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Release Notes v3000
Whats New The ST_FREE metric was added to expose the total available capacity (not consumed)
Changes and ImprovementsThe collection process has been improved to perform optimized queries
The first sample values of metrics now display the actual values instead of zeros
STOCONT Dataset
New metrics were added in the STOCONT dataset for controllers
STOGLB Dataset
The ST_CONFIG_SUM metric that was reporting on the available capacity (not consumed) nowexposes the Total Capacity
The ST_FREE metric now exposes the available capacity
Size is no more exposed by the ST_CONFIG_SUM_RAW metric but by the ST_RAW metric
New metrics were added in the STOGLB dataset for storage systems storage pools andvolumes
The ST_POOL_TYPE metric now uses the vendor terminology to define the Storage Pool typeThe possible values are Disk Group RAID Group Traditional Pool and Thin Pool
The Attached Hosts Number (ST_HOSTCNT) metric is now calculated at the system level toavoid duplicates
STOSSW Dataset
New metrics were added in the STOSSW dataset for ports
SY SDSK Dataset
The BYDISK_TYPE metric was added in the SYSDSK dataset to expose the type of disk (eg SSDSATA etc)
The disk transfer rate (BYDISK_RESPONSE_TIME metric) is now exposed in milliseconds
Fixed IssuesUnexpected error messages appeared in the console when log level was set to 1-Light
The capacity metrics Size Capacity Available Capacity Consumed Capacity andSubscribed Capacity are now always available for storage pools
Due to a saver issue some metrics were ignored on loading
5Support Information
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Support Information
You can obtain technical support by using the Support page on the BMC Software Web site or bycontacting Customer Support by telephone or email
Support Web Site
You can obtain technical support from BMC Software 24 hours a day 7 days a week at httpwwwbmccomsupport From this Web site you can
Read overviews about support services and programs that BMC Software offers
Find the most current information about BMC Software products
Search a database for problems similar to yours and possible solutions
Order or download product documentation
Report a problem or ask a question
Subscribe to receive email notices when new product versions are released
Find worldwide BMC Software support center locations and contact information including emailaddresses fax and telephone numbers
Support by Telephone or Email
In the United States and Canada if you need technical support and do not have access to the Web call800 537 1813 Outside the United States and Canada please contact your local support center forassistance To find telephone and email contact information for the BMC Software support center thatservices your location refer to the Contact Customer Support section of the Support page on the BMCSoftware Web site at httpwwwbmccomsupport
Additional Resources
You can also access product documents and search the Knowledge Base for help with an issue at httpwwwsentrysoftwarecom
6Legal Notices
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Legal Notices
copy Copyright 2011 BMC Software Inc
BMC BMC Software and the BMC Software logo are the exclusive properties of BMC Software Inc areregistered with the US Patent and Trademark Office and may be registered or pending registration inother countries All other BMC trademarks service marks and logos may be registered or pendingregistration in the US or in other countries All other trademarks or registered trademarks are theproperty of their respective owners
Linux is the registered trademark of Linus Torvalds
Oracle and Java are registered trademarks of Oracle andor its affiliates Other names may betrademarks of their respective owners
UNIX is the registered trademark of The Open Group in the US and other countries
The information included in this documentation is the proprietary and confidential information of BMCSoftware Inc its affiliates or licensors Your use of this information is subject to the terms andconditions of the applicable End User License agreement for the product and to the proprietary andrestricted rights notices included in the product documentation
BMC Software Inc2101 City West Blv d Houston TX 77042-2827 USA713 918 8800Custom er Support 800 537 1813 (United States and Canada) or contact y our local support center
7Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed for BMCCapacity Optimization and can be defined as an ETL Service named Sentry Software Integration forBCO - EMC SMI-S Agent Extractor Service that continuously polls and collects data from an SMI-SProvider Once an ETL Service is started it runs continuously on BMC Capacity Optimization Onceproperly configured the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service taskcollects all of the metric required for performing critical capacity optimization tasks such as analysistrending simulation and analytic modeling
EMC SMI-S A gent ETL for BMC Capacity Optim izationA rchitecture Diagram
Getting Started
9Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization supports the following EMC systems
Supported EMC Symmetrix Systems
EMC Symmetrix DMXtradeSeries (DMX-4 DMX-3 DMX-2)
EMC Symmetrix V-Max Series
Supported EMC CLARiiON Systems
EMC CX4 Series CX3 Series CX Series
Supported EMC VNX Systems
EMC VNX series
Supported versions of BMC Capacity Optimization
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
10Getting the Installation Package
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Getting the Installation Package
The installation package for EMC SMI-S Agent ETL for BMC Capacity Optimization can be downloadedfrom the BMC Electronic Product Distribution site or directly from Sentry Software Web site and consistsof the following archive EMC-SMIS-Agent-ETL-for-BCO-3000zip The file can be saved on anyserver accessible via the BCO Console
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
Table of Contents 2
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Table of Contents4Release Notes v3000
5Support Information
6Legal Notices
7Overview
9Supported Platforms and Versions
10Getting the Installation Package
11EMC SMI-S Agent
21Installing the ETL for BCO
24Configuring the ETL for BCO
28Disabling Enabling Volumes Monitoring
30Scheduling the Collect Frequency
32Setting the Data Saving Frequency
34Running the Extractor Service Task
37STOCONT Dataset Performance Metrics
38STOGLB Dataset Performance Metrics
43STOSSW Dataset Performance Metrics
44SYSDSK Dataset Performance Metrics
Introduction
4Release Notes v3000
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Release Notes v3000
Whats New The ST_FREE metric was added to expose the total available capacity (not consumed)
Changes and ImprovementsThe collection process has been improved to perform optimized queries
The first sample values of metrics now display the actual values instead of zeros
STOCONT Dataset
New metrics were added in the STOCONT dataset for controllers
STOGLB Dataset
The ST_CONFIG_SUM metric that was reporting on the available capacity (not consumed) nowexposes the Total Capacity
The ST_FREE metric now exposes the available capacity
Size is no more exposed by the ST_CONFIG_SUM_RAW metric but by the ST_RAW metric
New metrics were added in the STOGLB dataset for storage systems storage pools andvolumes
The ST_POOL_TYPE metric now uses the vendor terminology to define the Storage Pool typeThe possible values are Disk Group RAID Group Traditional Pool and Thin Pool
The Attached Hosts Number (ST_HOSTCNT) metric is now calculated at the system level toavoid duplicates
STOSSW Dataset
New metrics were added in the STOSSW dataset for ports
SY SDSK Dataset
The BYDISK_TYPE metric was added in the SYSDSK dataset to expose the type of disk (eg SSDSATA etc)
The disk transfer rate (BYDISK_RESPONSE_TIME metric) is now exposed in milliseconds
Fixed IssuesUnexpected error messages appeared in the console when log level was set to 1-Light
The capacity metrics Size Capacity Available Capacity Consumed Capacity andSubscribed Capacity are now always available for storage pools
Due to a saver issue some metrics were ignored on loading
5Support Information
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Support Information
You can obtain technical support by using the Support page on the BMC Software Web site or bycontacting Customer Support by telephone or email
Support Web Site
You can obtain technical support from BMC Software 24 hours a day 7 days a week at httpwwwbmccomsupport From this Web site you can
Read overviews about support services and programs that BMC Software offers
Find the most current information about BMC Software products
Search a database for problems similar to yours and possible solutions
Order or download product documentation
Report a problem or ask a question
Subscribe to receive email notices when new product versions are released
Find worldwide BMC Software support center locations and contact information including emailaddresses fax and telephone numbers
Support by Telephone or Email
In the United States and Canada if you need technical support and do not have access to the Web call800 537 1813 Outside the United States and Canada please contact your local support center forassistance To find telephone and email contact information for the BMC Software support center thatservices your location refer to the Contact Customer Support section of the Support page on the BMCSoftware Web site at httpwwwbmccomsupport
Additional Resources
You can also access product documents and search the Knowledge Base for help with an issue at httpwwwsentrysoftwarecom
6Legal Notices
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Legal Notices
copy Copyright 2011 BMC Software Inc
BMC BMC Software and the BMC Software logo are the exclusive properties of BMC Software Inc areregistered with the US Patent and Trademark Office and may be registered or pending registration inother countries All other BMC trademarks service marks and logos may be registered or pendingregistration in the US or in other countries All other trademarks or registered trademarks are theproperty of their respective owners
Linux is the registered trademark of Linus Torvalds
Oracle and Java are registered trademarks of Oracle andor its affiliates Other names may betrademarks of their respective owners
UNIX is the registered trademark of The Open Group in the US and other countries
The information included in this documentation is the proprietary and confidential information of BMCSoftware Inc its affiliates or licensors Your use of this information is subject to the terms andconditions of the applicable End User License agreement for the product and to the proprietary andrestricted rights notices included in the product documentation
BMC Software Inc2101 City West Blv d Houston TX 77042-2827 USA713 918 8800Custom er Support 800 537 1813 (United States and Canada) or contact y our local support center
7Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed for BMCCapacity Optimization and can be defined as an ETL Service named Sentry Software Integration forBCO - EMC SMI-S Agent Extractor Service that continuously polls and collects data from an SMI-SProvider Once an ETL Service is started it runs continuously on BMC Capacity Optimization Onceproperly configured the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service taskcollects all of the metric required for performing critical capacity optimization tasks such as analysistrending simulation and analytic modeling
EMC SMI-S A gent ETL for BMC Capacity Optim izationA rchitecture Diagram
Getting Started
9Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization supports the following EMC systems
Supported EMC Symmetrix Systems
EMC Symmetrix DMXtradeSeries (DMX-4 DMX-3 DMX-2)
EMC Symmetrix V-Max Series
Supported EMC CLARiiON Systems
EMC CX4 Series CX3 Series CX Series
Supported EMC VNX Systems
EMC VNX series
Supported versions of BMC Capacity Optimization
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
10Getting the Installation Package
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Getting the Installation Package
The installation package for EMC SMI-S Agent ETL for BMC Capacity Optimization can be downloadedfrom the BMC Electronic Product Distribution site or directly from Sentry Software Web site and consistsof the following archive EMC-SMIS-Agent-ETL-for-BCO-3000zip The file can be saved on anyserver accessible via the BCO Console
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
Introduction
4Release Notes v3000
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Release Notes v3000
Whats New The ST_FREE metric was added to expose the total available capacity (not consumed)
Changes and ImprovementsThe collection process has been improved to perform optimized queries
The first sample values of metrics now display the actual values instead of zeros
STOCONT Dataset
New metrics were added in the STOCONT dataset for controllers
STOGLB Dataset
The ST_CONFIG_SUM metric that was reporting on the available capacity (not consumed) nowexposes the Total Capacity
The ST_FREE metric now exposes the available capacity
Size is no more exposed by the ST_CONFIG_SUM_RAW metric but by the ST_RAW metric
New metrics were added in the STOGLB dataset for storage systems storage pools andvolumes
The ST_POOL_TYPE metric now uses the vendor terminology to define the Storage Pool typeThe possible values are Disk Group RAID Group Traditional Pool and Thin Pool
The Attached Hosts Number (ST_HOSTCNT) metric is now calculated at the system level toavoid duplicates
STOSSW Dataset
New metrics were added in the STOSSW dataset for ports
SY SDSK Dataset
The BYDISK_TYPE metric was added in the SYSDSK dataset to expose the type of disk (eg SSDSATA etc)
The disk transfer rate (BYDISK_RESPONSE_TIME metric) is now exposed in milliseconds
Fixed IssuesUnexpected error messages appeared in the console when log level was set to 1-Light
The capacity metrics Size Capacity Available Capacity Consumed Capacity andSubscribed Capacity are now always available for storage pools
Due to a saver issue some metrics were ignored on loading
5Support Information
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Support Information
You can obtain technical support by using the Support page on the BMC Software Web site or bycontacting Customer Support by telephone or email
Support Web Site
You can obtain technical support from BMC Software 24 hours a day 7 days a week at httpwwwbmccomsupport From this Web site you can
Read overviews about support services and programs that BMC Software offers
Find the most current information about BMC Software products
Search a database for problems similar to yours and possible solutions
Order or download product documentation
Report a problem or ask a question
Subscribe to receive email notices when new product versions are released
Find worldwide BMC Software support center locations and contact information including emailaddresses fax and telephone numbers
Support by Telephone or Email
In the United States and Canada if you need technical support and do not have access to the Web call800 537 1813 Outside the United States and Canada please contact your local support center forassistance To find telephone and email contact information for the BMC Software support center thatservices your location refer to the Contact Customer Support section of the Support page on the BMCSoftware Web site at httpwwwbmccomsupport
Additional Resources
You can also access product documents and search the Knowledge Base for help with an issue at httpwwwsentrysoftwarecom
6Legal Notices
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Legal Notices
copy Copyright 2011 BMC Software Inc
BMC BMC Software and the BMC Software logo are the exclusive properties of BMC Software Inc areregistered with the US Patent and Trademark Office and may be registered or pending registration inother countries All other BMC trademarks service marks and logos may be registered or pendingregistration in the US or in other countries All other trademarks or registered trademarks are theproperty of their respective owners
Linux is the registered trademark of Linus Torvalds
Oracle and Java are registered trademarks of Oracle andor its affiliates Other names may betrademarks of their respective owners
UNIX is the registered trademark of The Open Group in the US and other countries
The information included in this documentation is the proprietary and confidential information of BMCSoftware Inc its affiliates or licensors Your use of this information is subject to the terms andconditions of the applicable End User License agreement for the product and to the proprietary andrestricted rights notices included in the product documentation
BMC Software Inc2101 City West Blv d Houston TX 77042-2827 USA713 918 8800Custom er Support 800 537 1813 (United States and Canada) or contact y our local support center
7Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed for BMCCapacity Optimization and can be defined as an ETL Service named Sentry Software Integration forBCO - EMC SMI-S Agent Extractor Service that continuously polls and collects data from an SMI-SProvider Once an ETL Service is started it runs continuously on BMC Capacity Optimization Onceproperly configured the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service taskcollects all of the metric required for performing critical capacity optimization tasks such as analysistrending simulation and analytic modeling
EMC SMI-S A gent ETL for BMC Capacity Optim izationA rchitecture Diagram
Getting Started
9Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization supports the following EMC systems
Supported EMC Symmetrix Systems
EMC Symmetrix DMXtradeSeries (DMX-4 DMX-3 DMX-2)
EMC Symmetrix V-Max Series
Supported EMC CLARiiON Systems
EMC CX4 Series CX3 Series CX Series
Supported EMC VNX Systems
EMC VNX series
Supported versions of BMC Capacity Optimization
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
10Getting the Installation Package
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Getting the Installation Package
The installation package for EMC SMI-S Agent ETL for BMC Capacity Optimization can be downloadedfrom the BMC Electronic Product Distribution site or directly from Sentry Software Web site and consistsof the following archive EMC-SMIS-Agent-ETL-for-BCO-3000zip The file can be saved on anyserver accessible via the BCO Console
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
4Release Notes v3000
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Release Notes v3000
Whats New The ST_FREE metric was added to expose the total available capacity (not consumed)
Changes and ImprovementsThe collection process has been improved to perform optimized queries
The first sample values of metrics now display the actual values instead of zeros
STOCONT Dataset
New metrics were added in the STOCONT dataset for controllers
STOGLB Dataset
The ST_CONFIG_SUM metric that was reporting on the available capacity (not consumed) nowexposes the Total Capacity
The ST_FREE metric now exposes the available capacity
Size is no more exposed by the ST_CONFIG_SUM_RAW metric but by the ST_RAW metric
New metrics were added in the STOGLB dataset for storage systems storage pools andvolumes
The ST_POOL_TYPE metric now uses the vendor terminology to define the Storage Pool typeThe possible values are Disk Group RAID Group Traditional Pool and Thin Pool
The Attached Hosts Number (ST_HOSTCNT) metric is now calculated at the system level toavoid duplicates
STOSSW Dataset
New metrics were added in the STOSSW dataset for ports
SY SDSK Dataset
The BYDISK_TYPE metric was added in the SYSDSK dataset to expose the type of disk (eg SSDSATA etc)
The disk transfer rate (BYDISK_RESPONSE_TIME metric) is now exposed in milliseconds
Fixed IssuesUnexpected error messages appeared in the console when log level was set to 1-Light
The capacity metrics Size Capacity Available Capacity Consumed Capacity andSubscribed Capacity are now always available for storage pools
Due to a saver issue some metrics were ignored on loading
5Support Information
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Support Information
You can obtain technical support by using the Support page on the BMC Software Web site or bycontacting Customer Support by telephone or email
Support Web Site
You can obtain technical support from BMC Software 24 hours a day 7 days a week at httpwwwbmccomsupport From this Web site you can
Read overviews about support services and programs that BMC Software offers
Find the most current information about BMC Software products
Search a database for problems similar to yours and possible solutions
Order or download product documentation
Report a problem or ask a question
Subscribe to receive email notices when new product versions are released
Find worldwide BMC Software support center locations and contact information including emailaddresses fax and telephone numbers
Support by Telephone or Email
In the United States and Canada if you need technical support and do not have access to the Web call800 537 1813 Outside the United States and Canada please contact your local support center forassistance To find telephone and email contact information for the BMC Software support center thatservices your location refer to the Contact Customer Support section of the Support page on the BMCSoftware Web site at httpwwwbmccomsupport
Additional Resources
You can also access product documents and search the Knowledge Base for help with an issue at httpwwwsentrysoftwarecom
6Legal Notices
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Legal Notices
copy Copyright 2011 BMC Software Inc
BMC BMC Software and the BMC Software logo are the exclusive properties of BMC Software Inc areregistered with the US Patent and Trademark Office and may be registered or pending registration inother countries All other BMC trademarks service marks and logos may be registered or pendingregistration in the US or in other countries All other trademarks or registered trademarks are theproperty of their respective owners
Linux is the registered trademark of Linus Torvalds
Oracle and Java are registered trademarks of Oracle andor its affiliates Other names may betrademarks of their respective owners
UNIX is the registered trademark of The Open Group in the US and other countries
The information included in this documentation is the proprietary and confidential information of BMCSoftware Inc its affiliates or licensors Your use of this information is subject to the terms andconditions of the applicable End User License agreement for the product and to the proprietary andrestricted rights notices included in the product documentation
BMC Software Inc2101 City West Blv d Houston TX 77042-2827 USA713 918 8800Custom er Support 800 537 1813 (United States and Canada) or contact y our local support center
7Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed for BMCCapacity Optimization and can be defined as an ETL Service named Sentry Software Integration forBCO - EMC SMI-S Agent Extractor Service that continuously polls and collects data from an SMI-SProvider Once an ETL Service is started it runs continuously on BMC Capacity Optimization Onceproperly configured the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service taskcollects all of the metric required for performing critical capacity optimization tasks such as analysistrending simulation and analytic modeling
EMC SMI-S A gent ETL for BMC Capacity Optim izationA rchitecture Diagram
Getting Started
9Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization supports the following EMC systems
Supported EMC Symmetrix Systems
EMC Symmetrix DMXtradeSeries (DMX-4 DMX-3 DMX-2)
EMC Symmetrix V-Max Series
Supported EMC CLARiiON Systems
EMC CX4 Series CX3 Series CX Series
Supported EMC VNX Systems
EMC VNX series
Supported versions of BMC Capacity Optimization
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
10Getting the Installation Package
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Getting the Installation Package
The installation package for EMC SMI-S Agent ETL for BMC Capacity Optimization can be downloadedfrom the BMC Electronic Product Distribution site or directly from Sentry Software Web site and consistsof the following archive EMC-SMIS-Agent-ETL-for-BCO-3000zip The file can be saved on anyserver accessible via the BCO Console
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
5Support Information
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Support Information
You can obtain technical support by using the Support page on the BMC Software Web site or bycontacting Customer Support by telephone or email
Support Web Site
You can obtain technical support from BMC Software 24 hours a day 7 days a week at httpwwwbmccomsupport From this Web site you can
Read overviews about support services and programs that BMC Software offers
Find the most current information about BMC Software products
Search a database for problems similar to yours and possible solutions
Order or download product documentation
Report a problem or ask a question
Subscribe to receive email notices when new product versions are released
Find worldwide BMC Software support center locations and contact information including emailaddresses fax and telephone numbers
Support by Telephone or Email
In the United States and Canada if you need technical support and do not have access to the Web call800 537 1813 Outside the United States and Canada please contact your local support center forassistance To find telephone and email contact information for the BMC Software support center thatservices your location refer to the Contact Customer Support section of the Support page on the BMCSoftware Web site at httpwwwbmccomsupport
Additional Resources
You can also access product documents and search the Knowledge Base for help with an issue at httpwwwsentrysoftwarecom
6Legal Notices
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Legal Notices
copy Copyright 2011 BMC Software Inc
BMC BMC Software and the BMC Software logo are the exclusive properties of BMC Software Inc areregistered with the US Patent and Trademark Office and may be registered or pending registration inother countries All other BMC trademarks service marks and logos may be registered or pendingregistration in the US or in other countries All other trademarks or registered trademarks are theproperty of their respective owners
Linux is the registered trademark of Linus Torvalds
Oracle and Java are registered trademarks of Oracle andor its affiliates Other names may betrademarks of their respective owners
UNIX is the registered trademark of The Open Group in the US and other countries
The information included in this documentation is the proprietary and confidential information of BMCSoftware Inc its affiliates or licensors Your use of this information is subject to the terms andconditions of the applicable End User License agreement for the product and to the proprietary andrestricted rights notices included in the product documentation
BMC Software Inc2101 City West Blv d Houston TX 77042-2827 USA713 918 8800Custom er Support 800 537 1813 (United States and Canada) or contact y our local support center
7Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed for BMCCapacity Optimization and can be defined as an ETL Service named Sentry Software Integration forBCO - EMC SMI-S Agent Extractor Service that continuously polls and collects data from an SMI-SProvider Once an ETL Service is started it runs continuously on BMC Capacity Optimization Onceproperly configured the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service taskcollects all of the metric required for performing critical capacity optimization tasks such as analysistrending simulation and analytic modeling
EMC SMI-S A gent ETL for BMC Capacity Optim izationA rchitecture Diagram
Getting Started
9Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization supports the following EMC systems
Supported EMC Symmetrix Systems
EMC Symmetrix DMXtradeSeries (DMX-4 DMX-3 DMX-2)
EMC Symmetrix V-Max Series
Supported EMC CLARiiON Systems
EMC CX4 Series CX3 Series CX Series
Supported EMC VNX Systems
EMC VNX series
Supported versions of BMC Capacity Optimization
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
10Getting the Installation Package
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Getting the Installation Package
The installation package for EMC SMI-S Agent ETL for BMC Capacity Optimization can be downloadedfrom the BMC Electronic Product Distribution site or directly from Sentry Software Web site and consistsof the following archive EMC-SMIS-Agent-ETL-for-BCO-3000zip The file can be saved on anyserver accessible via the BCO Console
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
6Legal Notices
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Legal Notices
copy Copyright 2011 BMC Software Inc
BMC BMC Software and the BMC Software logo are the exclusive properties of BMC Software Inc areregistered with the US Patent and Trademark Office and may be registered or pending registration inother countries All other BMC trademarks service marks and logos may be registered or pendingregistration in the US or in other countries All other trademarks or registered trademarks are theproperty of their respective owners
Linux is the registered trademark of Linus Torvalds
Oracle and Java are registered trademarks of Oracle andor its affiliates Other names may betrademarks of their respective owners
UNIX is the registered trademark of The Open Group in the US and other countries
The information included in this documentation is the proprietary and confidential information of BMCSoftware Inc its affiliates or licensors Your use of this information is subject to the terms andconditions of the applicable End User License agreement for the product and to the proprietary andrestricted rights notices included in the product documentation
BMC Software Inc2101 City West Blv d Houston TX 77042-2827 USA713 918 8800Custom er Support 800 537 1813 (United States and Canada) or contact y our local support center
7Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed for BMCCapacity Optimization and can be defined as an ETL Service named Sentry Software Integration forBCO - EMC SMI-S Agent Extractor Service that continuously polls and collects data from an SMI-SProvider Once an ETL Service is started it runs continuously on BMC Capacity Optimization Onceproperly configured the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service taskcollects all of the metric required for performing critical capacity optimization tasks such as analysistrending simulation and analytic modeling
EMC SMI-S A gent ETL for BMC Capacity Optim izationA rchitecture Diagram
Getting Started
9Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization supports the following EMC systems
Supported EMC Symmetrix Systems
EMC Symmetrix DMXtradeSeries (DMX-4 DMX-3 DMX-2)
EMC Symmetrix V-Max Series
Supported EMC CLARiiON Systems
EMC CX4 Series CX3 Series CX Series
Supported EMC VNX Systems
EMC VNX series
Supported versions of BMC Capacity Optimization
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
10Getting the Installation Package
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Getting the Installation Package
The installation package for EMC SMI-S Agent ETL for BMC Capacity Optimization can be downloadedfrom the BMC Electronic Product Distribution site or directly from Sentry Software Web site and consistsof the following archive EMC-SMIS-Agent-ETL-for-BCO-3000zip The file can be saved on anyserver accessible via the BCO Console
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
7Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Overview
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed for BMCCapacity Optimization and can be defined as an ETL Service named Sentry Software Integration forBCO - EMC SMI-S Agent Extractor Service that continuously polls and collects data from an SMI-SProvider Once an ETL Service is started it runs continuously on BMC Capacity Optimization Onceproperly configured the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service taskcollects all of the metric required for performing critical capacity optimization tasks such as analysistrending simulation and analytic modeling
EMC SMI-S A gent ETL for BMC Capacity Optim izationA rchitecture Diagram
Getting Started
9Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization supports the following EMC systems
Supported EMC Symmetrix Systems
EMC Symmetrix DMXtradeSeries (DMX-4 DMX-3 DMX-2)
EMC Symmetrix V-Max Series
Supported EMC CLARiiON Systems
EMC CX4 Series CX3 Series CX Series
Supported EMC VNX Systems
EMC VNX series
Supported versions of BMC Capacity Optimization
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
10Getting the Installation Package
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Getting the Installation Package
The installation package for EMC SMI-S Agent ETL for BMC Capacity Optimization can be downloadedfrom the BMC Electronic Product Distribution site or directly from Sentry Software Web site and consistsof the following archive EMC-SMIS-Agent-ETL-for-BCO-3000zip The file can be saved on anyserver accessible via the BCO Console
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
Getting Started
9Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization supports the following EMC systems
Supported EMC Symmetrix Systems
EMC Symmetrix DMXtradeSeries (DMX-4 DMX-3 DMX-2)
EMC Symmetrix V-Max Series
Supported EMC CLARiiON Systems
EMC CX4 Series CX3 Series CX Series
Supported EMC VNX Systems
EMC VNX series
Supported versions of BMC Capacity Optimization
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
10Getting the Installation Package
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Getting the Installation Package
The installation package for EMC SMI-S Agent ETL for BMC Capacity Optimization can be downloadedfrom the BMC Electronic Product Distribution site or directly from Sentry Software Web site and consistsof the following archive EMC-SMIS-Agent-ETL-for-BCO-3000zip The file can be saved on anyserver accessible via the BCO Console
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
9Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Supported Platforms and Versions
EMC SMI-S Agent ETL for BMC Capacity Optimization supports the following EMC systems
Supported EMC Symmetrix Systems
EMC Symmetrix DMXtradeSeries (DMX-4 DMX-3 DMX-2)
EMC Symmetrix V-Max Series
Supported EMC CLARiiON Systems
EMC CX4 Series CX3 Series CX Series
Supported EMC VNX Systems
EMC VNX series
Supported versions of BMC Capacity Optimization
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
10Getting the Installation Package
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Getting the Installation Package
The installation package for EMC SMI-S Agent ETL for BMC Capacity Optimization can be downloadedfrom the BMC Electronic Product Distribution site or directly from Sentry Software Web site and consistsof the following archive EMC-SMIS-Agent-ETL-for-BCO-3000zip The file can be saved on anyserver accessible via the BCO Console
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
10Getting the Installation Package
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Getting the Installation Package
The installation package for EMC SMI-S Agent ETL for BMC Capacity Optimization can be downloadedfrom the BMC Electronic Product Distribution site or directly from Sentry Software Web site and consistsof the following archive EMC-SMIS-Agent-ETL-for-BCO-3000zip The file can be saved on anyserver accessible via the BCO Console
Before you can install EMC SMI-S Agent ETL for BMC Capacity Optimization you must have previouslyinstalled and configured BMC Capacity Optimization v9003
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
11EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent
The solution leverages the EMC SMI-S Agent that needs to be installed on a Windows or Linux systemThe following procedure explains in details how to get install and configure EMC SMI-S Agent to enableEMC SMI-S Agent ETL for BMC Capacity Optimization to efficiently interact with it
EMC SMI-S Agent ETL for BMC Capacity Optimization is only compatible with EMC SMI-S Agent v 4xx or later
1 Install the EMC SMI-S Agent1 Access the EMCrsquos Online Support website httpsupportemccom
2 Log in with the User ID and Password provided by EMCrsquos Online Support If you do not have anaccount you can register directly on EMCrsquos Online Support website
EMC Online Support - Welcom e Page
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
12EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Click Download
EMC Online Support - Download Page
4 Type SMI-S Provider and click Enter
EMC Online Support - SMI-S Prov ider Download Page
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
13EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 Download the SMI-S Provider executable file It is recommended to download the latest version ofthe x64 package available for your operating system
6 Launch the executable file
7 Select the items required by EMC Solutions Enabler with SMI and click Install The EMC SolutionsEnabler with SMI X64 welcome page appears
EMC Solutions Enabler with SMI X64 mdash Welcom e Page
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
14EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
8 Click Next to begin the installation The Destination Folder dialog box opens and prompts you toselect an install directory for EMC Solutions Enabler It is recommended that you choose the defaultdirectory
EMC Solutions Enabler with SMI X64 mdash Destination Folder
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
15EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
9 Click Next to continue The Provider List dialog box opens
EMC Solutions Enabler with SMI X64 - Prov ider List
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
16EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
10 Select both Array Provider and Host Provider and click Next to continue The Service Listdialog box opens
EMC Solutions Enabler with SMI X64- Serv ice List
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
17EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
11 Click Next The Ready to Install the Program dialog box opens
EMC Solutions Enable with SMI X64 mdash Start Installation
12 Click Install to begin installing files to your selected folder This may take several minutes
EMC Solutions Enable with SMI X64 mdash Installation Program Com plete
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
18EMC SMI-S Agent
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
13 When the Installation Wizard Complete dialog box opens click Finish to complete the setup
14 When the installation procedure is complete update your environment variable for path to includethe EMCSolutions Enabler installation directory which by default is CProgram FilesEMCSYMCLIbin in order to run the command line utilities from any directory
2 Add CLARiiONVNX Disk Array to the InstalledSMI-S Provider1 Navigate to the CProgram FilesEMCSYMCLIstorbin and run TestSmiProviderexe
2 For connection type type ssl
3 For Host type enter
4 Repeat the operation for Port Username Password Log output to console Log output to file andLogfile path
5 Type addsystype y (yes)type 1 (Default for CLARiiONVNX)type xxxxxxxxxxxx (SPA IP Address of the CLARiiONVNX array)type xxxxxxxxxxxx (SPB IP Address of the CLARiiONVNX Array)
type entertype 2 type 2 type the username (type a user that has at least a read access on the CLARiiONVNX Array) type the password (password of the above user)
then type enter
5 A message meaning that the CLARiiONVNX Array has been added is displayed
3 Add a User to SMI-S provider 1 Access httpsltip-hostgt5989ecomconfig where ltip-hostgt is either the IP address of the name
of the SMI-S Provider host
2 Log in using the username admin and 1Password as password
3 Click Add User and create a user with the role of Administrator This newly created username cannow be used to obtain access to the Array Provider
4 Add authorization information1 Shut down the EMC CIM Server (The service name is ECOMexe and it displays as ECOM in the
Services control panel)
2 Use the SYMCLI symcfg command as shown in the following syntax example to add the usernameand password for each CLARiiON storage processor gtsymcfg authorization add -host HostName -username UserName -password PassWord
3 Add authorization for CLARiiON storage processor A with IP address ltip1gt username clariion andpassword clarpass using the following command symcfg auth add -host 1722319386 -usernameclariion -password clarpass
4 Then repeat the operation with CLARiiON storage processor B
You must list the information for storage processor A first then storage processor B Any time alocally-attached CLARiiON is added to the EMC SMI-S Provider the EMC CIM Server must first beshut down Once shut down the authorization information can be added as described previouslyand the EMC CIM Server must be restarted
5 Start EMC CIM Server
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
Integrating the ETL for BCO
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
20
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
EMC SMI-S Agent ETL for BMC Capacity Optimization is a connector specifically designed to interact withthe BMC Capacity Optimization (BCO) environment It relies on the BCO interface and features forintegrating managing and processing the performance metrics of your EMC systems
Before installing make sure that all the prerequisite operations have been properly completed (refer tothe Getting Started chapter)
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
21Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Installing EMC SMI-S Agent ETL forBMC Capacity OptimizationThis section provides the step-by-step procedure to upload EMC SMI-S Agent ETL for BMC CapacityOptimization into the BCO Console The upload procedure is quick and easy as it relies on the Uploadpatch or additional component file mechanism accessible in the BCO Console under the sectionAdministration gtSystem gtMaintenance
Upload and Install EMC SMI-S Agent ETL for BMCCapacity Optimization in the BCO Console
To integrate EMC SMI-S Agent ETL for BMC Capacity Optimization to the BCO Console follow thesesteps
1 Access the BCO Console
2 In the Administration tab click System gt Maintenance
At the bottom of the Maintenance page locate the Upload patch or additional component filesection
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
22Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click Browse locate and select the file to download named EMC-SMIS-Agent-ETL-for-BCO-3000zip
Click Upload
3 Read the Overview and click Next to continue
4 Read and accept the End User License Agreement
5 Select the server on which the operation must be executed that is on which server the package willbe saved
6 Click Proceed to continue
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
23Installing EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
7 A successful installation will result in a green line in the Additional components table
It is possible (and recommended in case of unsuccessful outcome eg a yellow WARNING line) to inspect the
deployment log which can be done by clicking the icon
Once you have properly installed EMC SMI-S Agent ETL for BMC Capacity Optimization you need toproceed with the configuration of the corresponding ETL Service
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
24Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Configuring EMC SMI-S Agent ETLfor BMC Capacity OptimizationThis chapter details every steps required to configure an ETL Service and add it as an ETL taskresponsible for extracting capacity and performance metrics on EMC storage systems from the the EMCSMI-S Provider and feeding it into the BMC Capacity Optimization Data Warehouse
To configure the ETL
1 Access the configuration window
In the Administration tab click Scheduler gt ETL tasks
Press the Add button and select Add ETL
2 In the Run configuration tab
Name the Run configuration (By default Default)
Select the environment on which the module will run Production or Test
Enter a description (optional)
Select a Log level specifying how detailed the execution log will be Available options areLight Medium and Verbose
Set the Execute in simulation mode option to no
When the ETL is executed in simulation mode actual data is not stored in the data warehouse This option is usefulwhile testing a new ETL task
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
25Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
From the ETL module drop-down menu select Sentry Software Integration for BCO - Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
Select all the datasets available
3 In the Lookup sharing tab select
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
26Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
PRIVATE if only this ETL will extract data from the specified resources
SHARED to avoid duplicates if several ETLs extract data from the same resources Youll thenhave to specify the ETL with which this ETL will share the information
4 In the Object relationship tab indicate the Domain tree the imported entities will populate
choosing new Domain displays the domain default name Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service
choosing existing Domain allows you to select a specific domain
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
27Configuring EMC SMI-S Agent ETL for BMCCapacity Optimization
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
5 In the Connection settings tab
Enter the hostname or the IP address of the server where the EMC SMI-S Provider is running
Indicate the port number used by the EMC SMI-S Provider (default 5989)
Enter the username and password to connect to the EMC SMI-S Provider (default username isAdmin)
Enter the transport protocol used by the EMC SMI-S Provider (for HTTP the default port is 5988for HTTPS the default port is 5989)
6 Click Save
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
28Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Disabling Enabling VolumesMonitoringDiscovering and collecting volumes metrics are resource-intensive actions that can create extraworkload on the system To reduce the system resource consumption administrators can disablevolumes monitoring
To disable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 Select the ETL additional settings tab
Disabling Volum e Monitoring
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
29Disabling Enabling Volumes Monitoring
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 From the Disable Volumes Monitoring pull-down list select Yes
4 Click Save
Discovery and collect requests are no longer performed and the following metrics are no longeravailable for the STOGLB dataset
ST_ACC_USED (accessible used space)
ST_ACCESSIBLE (accessible space)
ST_DEVICE_TOTAL ST_PRIMARY_ALLOCATED (subscribed capacity)
ST_DEVICECOUNT (number of volumes)
ST_HOSTCNT (number of hosts)
ST_THINPOOL_SUBSCRIBED_TOTAL (thin pools subscribed capacity)
ST_POOL_OVERSUBSCRIBED_TOTAL (oversubscription total)
ST_POOL_DEV_COUNT (number of volumes)
To enable volumes monitoring1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run Configuration tab make sure that the STOGLB and OBJREL datasets are selected
3 Select the ETL additional settings tab
Enabling Volum es Monitoring
4 From the Disable Volumes Monitoring pull-down list select No
5 Check the Volume box to make the volume entity appear in the Domain tree Please note thatcreating entities for additional object classes may have a deep impact on the performance of theapplication
6 Click Save
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
30Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Scheduling the Collect Frequency
1 Edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
In the Administration tab click Scheduler gt ETL tasks
Click the link Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
31Scheduling the Collect Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Click the Stop button to stop the service execution
Click the Edit button
2 Click the link provided at the bottom of the page You can view the ETL properties from thispage to display a list of editable options
3 Locate the serviceperiod option and enter the number of milliseconds corresponding thefrequency at which data will be collected
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
32Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Setting the Data Saving Frequency
To set the data saving frequency
1 Create or edit the EMC SMI-S Agent ETL for BMC Capacity Optimization Run Configuration
2 In the Run configuration tab click the Advanced button
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
33Setting the Data Saving Frequency
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
3 Locate the Saver period option and select the frequency at which the ETL module will collect thedata (1h or 2h)
Click Save
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
34Running Sentry Software Integration for BCO -EMC SMI-S Agent Extractor Service Task
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Running Sentry SoftwareIntegration for BCO - EMC SMI-SAgent Extractor Service Task
The steps listed in this section are not mandatory and are required only if the ETLs are not already scheduled forexecution
To run the Sentry Software Integration for BCO - EMC SMI-S Agent Extractor Service task to retrieveperformance metrics perform the following steps
1 In the BMC Capacity Optimization Console click the Administration tab and select Scheduler gtETL tasks
2 Click to execute the Sentry Software Integration for BCO - EMC SMI-S Agent ExtractorService ETL task from the ETL tasks table When the execution is complete the value of theStatus column in the ETL tasks table changes from Waiting to Ended
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
Reference Guide
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
36
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
This section provides detailed information on the performance metrics collected by the Sentry SoftwareIntegration for BCO - EMC SMI-S Agent Extractor Service from the EMC SMI-S Provider and madeavailable in the BCO Console Metrics are available in the following datasets
STOCONT Dataset Performance Metrics
STOGLB Dataset Performance Metrics
STOSSW Dataset Performance Metrics
SYSDSK Dataset Performance Metrics
For additional information about datasets management refer to BMC Capacity Optimizationdocumentation
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
37STOCONT Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOCONT Dataset PerformanceMetricsMetrics are presented in table where each column represents a particular variable and each rowcorresponds to a given member of the STOCONT dataset
Metric Unit Name Description Value Type
BYCONT_PORT_NUM
NA Number of availableports by controller
Number of available ports by controller Thesubobject specifies the controller name
Configurationdata (string)
BYCONT_PROCESSOR_UTIL
PCT Processor utilization bycontroller
Processor utilization by controller Thesubobject specifies the controller name
Percentagecounter
BYCONT_RESPONSE_TIME
MILLIS Response time bycontroller
Response time by controller The subobjectspecifies the controller name
Elapsed time
BYCONT_TRANSFER_RATE
BYTES Transfer rate bycontroller
Transfer rate by controller The subobjectspecifies the controller name
A frequency ineventssec
Additional Columns
ColumnName Unit Name Description
CONTNM NAStorage controllername Storage controller name
DS_SYSNM NASystem name inthe Datasource The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample
SYSNM NA System nameThe name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
38STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOGLB Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOGLB dataset
Metric EntityUnit Name Description Value Type
ST_ACCESSIBLE
StorageAreaNetwork
BYTES
Accessible Space
Total capacity of accessible devices on thisarray or the arrays in the group
Generic counterabsolute value
ST_ACC_USED
StorageAreaNetwork
BYTES
Accessible UsedSpace
Total host file system and raw databasecapacity that resides exclusively on this arrayor on one array in this group Does notinclude file system or raw database capacitythat also resides on another array
Generic counterabsolute value
ST_AVAILABLE_CAPACITY_PCT
StoragePool PCT
AvailableCapacityPercentage
Percentage of the storage capacity that isnot consumed Percentage counter
ST_AVAILABLE_FOR_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityforStoragePools
Raw space available for storage poolcreation
Negativeaccumulation counter
ST_AVAILABLE_IN_STORAGE_POOLS
StorageAreaNetwork
BYTES
AvailableCapacityinStoragePools
Sum of space not consumed in all storagepools
Negativeaccumulation counter
ST_CACHE
StorageAreaNetwork
BYTES
ArrayCache
Amount of array cache For a CLARiiONsystems corresponds to the sum of theReadCacheSize for all processors
Configuration data(string)
ST_CONFIG_SUM
StorageAreaNetworkStoragePool
BYTES
ConfiguredUsableSpace
Capacity on the array that can be used bythe array Includes capacity configured intological devices or groups minus capacitydefined by the protection level (mirror orparity RAID) for the devices or groups
Generic counterabsolute value
ST_CONFIG_SUM_RAW
StorageAreaNetworkStoragePool
BYTES
Configured RawSpace
Capacity on the array that has a definedprotection level (mirror or parity RAID)
Generic counterabsolute value
ST_DEVICECOUNT
StorageAreaNetwork QTY
StorageDevicesNumber Number of storage devices
Configuration data(string)
ST_DEVICE_TOTAL
StorageAreaNetwork
BYTES
DeviceSpace
Sum of logical device capacity on this array orthe arrays in the group
Generic counterabsolute value
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
39STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_FREE
StorageAreaNetworkStoragePool
BYTES
StorageFree Storage free size
Negativeaccumulation counter
ST_HOSTCNT
StorageAreaNetwork QTY
Attached HostsNumber
Number of hosts to which devices on thisarray or the arrays in the group areallocated
Note This metric is calculated at the systemlevel to avoid duplicates Configuration data
(string)
ST_MICROCODE
StorageAreaNetwork NA
Microcodeversion Software microcode version
Configuration data(string)
ST_MODEL
StorageAreaNetwork NA
BoxModel Box model
Configuration data(string)
ST_POOL_DEV_COUNT
StoragePool NA
Pooldevicescount Pool devices count
Configuration data(string)
ST_POOL_OVERSUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
PoolOversubscribedTotal
The amount by which storage pool is over-subscribed
Generic counterabsolute value
ST_POOL_OVERSUBSCRIPTION_SITUATION
StoragePool NA
PoolOversubscriptionSituation
Identify the over-subscribed pools in dangerie thin pools where Subscribed CapacityPercentage is greater than 100 and theConsumed Capacity Percentage crosses thethreshold
Configuration data(string)
ST_POOL_PROTECTION_LEVEL
StoragePool NA
PoolProtection Level Pool protection level
Configuration data(string)
ST_POOL_SUBSCRIBED_CAPACITY_PCT
StoragePool PCT
PoolSubscribedCapacityPercentage
Subscribed capacity in percentage of thecapacity of the storage pool Can exceed100 for thin pools therefore calledoversubscribed Percentage counter
ST_POOL_TYPEStoragePool NA
ArrayPoolType
Type of the pool Possible values are DiskGroup RAID Group Traditional Pool and ThinPool
Configuration data(string)
ST_PORT_COUNT
StorageAreaNetwork NA
Storagearrayportsnumber Number of storage array ports
Configuration data(string)
ST_PRIMARY_ALLOCATED
StorageAreaNetwork
BYTES
PrimaryAllocated UsableSpace
Capacity of primary logical devices on whichhost can perform IO operations minuscapacity defined by the protection level(mirrors or parity RAID) for the devices
Generic counterabsolute value
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
40STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_RAW
StorageAreaNetwork
BYTES
RawSpace
Sum of the capacities of the physical disks inthe array
Generic counterabsolute value
ST_SID
StorageAreaNetwork NA
StorageDeviceUniqueIdentifier Unique identifier of the storage device
Configuration data(string)
ST_SYSTEM_BANDWIDTH
StorageAreaNetwork
BYTES
SystemBandwidth Bandwidth available in storage system
Configuration data(string)
ST_SYSTEM_BANDWIDTH_UTIL
StorageAreaNetwork PCT
SystemBandwidthUtilization Bandwidth consumed in storage system Percentage counter
ST_SYSTEM_TRANSFER_BYTE_RATE
StorageAreaNetwork
BYTES
SystemTransferByteRate Total data traffic (in and out read and write)
A frequency ineventssec
ST_THINDEV_COUNT
StorageAreaNetwork NA
Thindevicescount Thin devices count
Positive accumulationcounter
ST_THINPOOL_CONFIG_TOTAL
StorageAreaNetwork
BYTES
Thin PoolTotalcapacity Thin pool total capacity
Configuration data(string)
ST_THINPOOL_COUNT
StorageAreaNetwork NA
Thinpoolscount Thin pools count
Positive accumulationcounter
ST_THINPOOL_FREE
StorageAreaNetwork
BYTES
Thin poolfreespace
Total amount of free space on the array inthin pool devices
Negativeaccumulation counter
ST_THINPOOL_SUBSCRIBED_TOTAL
StorageAreaNetworkStoragePool
BYTES
Thin PoolSubscribed Totalcapacity Thin pool subscribed total capacity
Configuration data(string)
ST_THINPOOL_USED
StorageAreaNetwork
BYTES
Thin poolusedspace
Total amount of data on the array residing inthin pool devices
Generic counterabsolute value
ST_TYPE
StorageAreaNetwork QTY
BoxType Box type
Configuration data(string)
ST_USEDStoragePool
BYTES
StorageUsedSpace Storage array used space
Positive accumulationcounter
ST_USED_PCT
StorageAreaNetworkStoragePool PCT
StorageUsedSpacePercentage Storage array used space percentage Percentage counter
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
41STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Metric EntityUnit Name Description Value Type
ST_VENDOR
StorageAreaNetwork
BYTES
ArrayVendor Amount vendor
Configuration data(string)
ST_VOLUME_CONSUMED_CAPACITY_PCT
Storage -Volume PCT
VolumeConsumedCapacityPercentage
Percentage of the volume subscribed capacitythat has been actually consumed by the hostWill be typically less than 100 for thinvolumes Will be exactly 100 for alltraditional volumes Percentage counter
ST_VOLUME_HOST_VISIBLE_CAPACITY
Storage -Volume
BYTES
HostVolumeVisibleCapacity
Amount of capacity that has been subscribedand can be seen by the host
Configuration data(string)
ST_VOLUME_MAPPED
Storage -Volume NA
VolumeMapped
Whether the LUN is mapped to at least onehost
Configuration data(string)
ST_VOLUME_RAID_LEVEL
Storage -Volume NA
VolumeRAIDLevel RAID level of the volume
Configuration data(string)
ST_VOLUME_RESPONSE_TIME
Storage -Volume
MILLIS
VolumeResponse Time
Average time taken by the controller tocomplete read and write requests during thepolling period Elapsed time
ST_VOLUME_TIME_SINCE_LAST_ACTIVITY
Storage -Volume NA
VolumeTimeSinceLastActivity
Number of days since a last read or writeoperation has been observed on themonitored volume
Configuration data(string)
ST_VOLUME_TRANSFER_BYTE_RATE
Storage -Volume
BYTES
VolumeTransferByteRate Data traffic (read and write) on the volume
A frequency ineventssec
ST_VOLUME_USED
Storage -Volume
BYTES
StorageVolumeUsedSize Storage volume used size
Positive accumulationcounter
These metrics will be missing if volumes monitoring is disabled
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
SYSNM NA Storage name The name of the storage system
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
42STOGLB Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
For detailed information about datasets refer to the BMC Capacity Optimization documentation
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
43STOSSW Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
STOSSW Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the STOSSW dataset
Metrics Unit Name Description Val Type
BYPORT_ADDRESS NA Storage switch portaddress
Storage switch port address Configurationdata (string)
BYPORT_BANDWIDTH
BITS Bandwidth of thestorage switch port
Bandwidth of the storage switch port Configurationdata (string)
BYPORT_BANDWIDTH_UTIL
BITS Bandwidth utilizationof the storage switchport
Bandwidth utilization of the storage switchport
Percentagecounter
BYPORT_BYTE_RATE
BYTES Inputoutput trafficrate for the port
Inputoutput traffic rate for the port A frequency ineventssec
BYPORT_CONTROLLER_NAME
NA Storage switch portcontroller name
Storage switch port controller name Configurationdata (string)
BYPORT_TYPE NA Storage switch porttype
Storage switch port type Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DURATION S Duration Duration of the sample (in seconds)
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
LOCATIONNM
NA Location Name Physical location of the measured object if absent assumedUNKNOWN
PORTNM NA Storage switchport name
Storage switch port name
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
For detailed information about datasets refer to the BMC Capacity Optimization documentation
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
44SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
SYSDSK Dataset PerformanceMetricsMetrics are presented in a table where each column represents a particular variable and each rowcorresponds to a given member of the SYSDSK dataset
Metrics
Metrics Unit Name Description Val Type
BYDISK_MODEL NA Model by Disk Model of the Disk Configurationdata (string)
BYDISK_READ_RATE
BYTES Disk Read Rate by Disk The average bytes per second read from thisdisk device during the interval The sub-objectspecifies the disk id
A frequency ineventssec
BYDISK_RESPONSE_TIME
MILLIS Disk Response Time The average time (in milliseconds) for IOrequests issued to the device to be servedThis includes the time spent by the requests inqueue and the time spent servicing them
Genericcounterabsolute valueweighted
BYDISK_RPM RPM Disk Revolutions perMinute
Disk revolutions per minute Configurationdata (string)
BYDISK_SIZE BYTES Size by Disk Disk size (bytes) Configurationdata (string)
BYDISK_TRANSFER_RATE
BYTES Disk Transfer Rate byDisk
The average bytes per second transferred toor from this disk device during the intervalThe sub-object specifies the Disk id
A frequency ineventssec
BYDISK_UTIL PCT Disk Utilization byDisk
The percentage of the time that this diskdevice was busy transferring data during theinterval The sub-object specifies the diskname
PERCENTAGE
BYDISK_WRITE_RATE
BYTES Disk Write Rate byDisk
The average bytes per second written to thisdisk device during the interval The sub-objectspecifies the disk id
RATE
BYDISK_TYPE NA The Disk Type The type of the disk such as physical orvirtual
Configurationdata (string)
Additional Columns
ColumnName
Unit Name Description
DS_SYSNM NA System name inthe Datasource
The name of the system as in the Datasource (for lookup)
DSKNM NA Disk Name The name of the disk
DURATION S Duration Duration of the sample (in seconds)
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
45SYSDSK Dataset Performance Metrics
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
ColumnName
Unit Name Description
GOLEVELS NA Grouping ObjectLevels
Levels for populating a grouping object colon separated
SYSNM NA System name The name of the system proposed for identification in BMC CapacityOptimization if absent the DS_SYSNM is used
SYSTYPENM NA Object type Object type name
TS NA Timestamp Start timestamp of the sample [YYYY-MM-DD HHMISS]
WEIGHT NA Weight The weight of the sample
For detailed information about datasets refer to the BMC Capacity Optimization documentation
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
Index 46
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
Index
- A -Add ETL 24
Additional components 21
Architecture 7
- B -BCO Console 21
- C -Configuration 24
Connection settings 24
- D -Dataset
STOCONT 37
STOGLB 38
STOSSW 43
SYSDSK 44
- E -EMC CIM Server 11
EMC Solutions Enable 11
ETL tasks 24
Execute 34
- I -Install Un-install
Add User 11
Array Provider 11
Authorization information 11
Clariion Disk Array 11
EMC SMI-S Agent 11
Host Provider 11
Prerequisites 11
SMI-S Agent 11
Installation 21
- L -License Agreement 21
Lookup sharing 24
- O -Object relationships 24
Overview 7
- P -Performance Metrics 37 38 43 44
Platforms
DMX 9
EMC CX4 9
EMC Symmetrix 9
EMC VNX 9
V-Max 9Powerlink 11
- R -Reference Guide 36
Run configuration 24
- S -Service
ECOMexe 11STOCONT Dataset 37
STOGLB Dataset 38
STOSSW Dataset 43
Supported
Platforms 9
Versions 9SYSDSK Dataset 44
- T -Task properties 24
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
Index 47
EMC SMI-S Agent ETL for BMC Capacity Optimization
Version 3000
- U -Upload 21
- V -Versions
BMC Capacity Optimization 9
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
About BMCreg SoftwareBMC Software Inc NYSEBMC is a leading provider of enterprise managementsolutions that empower companies to manage their IT infrastructure from abusiness perspective Delivering Business Service Management BMC Softwaresolutions span enterprise systems applications databases and servicemanagement Founded in 1980 BMC Software has offices worldwide and fiscal2004 revenues of more than $14 billion For more information about BMC
Software visit wwwbmccom
About Sentry SoftwaretradeSentry Software a strategic Technology Alliance Partner of BMC Softwareprovides key monitoring solutions specifically designed to expand thecapabilities of BMC Performance Manager thus enabling up to 100 coverage ofany infrastructure Sentry Software specializes in single solutions for multi-platform monitoring of hardware custom applications or any IT component andblackout windows Sentry Software products are deployed in 45 countries acrossthe globe and lead the list of BMC Softwarersquos third-party product sales For more
information about Sentry Software please visit wwwsentrysoftwarenet
443350
- Table of Contents
- Introduction
- Release Notes v3000
- Support Information
- Legal Notices
- Overview
- Getting Started
- Supported Platforms and Versions
- Getting the Installation Package
- EMC SMI-S Agent
- Integrating the ETL for BCO
- Installing the ETL for BCO
- Configuring the ETL for BCO
- Disabling Enabling Volumes Monitoring
- Scheduling the Collect Frequency
- Setting the Data Saving Frequency
- Running the Extractor Service Task
- Reference Guide
- STOCONT Dataset Performance Metrics
- STOGLB Dataset Performance Metrics
- STOSSW Dataset Performance Metrics
- SYSDSK Dataset Performance Metrics
- Keyword Index
top related