Electromagnetic pump EMX 08 - Gotec SA - Pompes et ...€¦ · EMX 08 Maximum pressure Maximum flow rate Maximum suction height Viscosity range Filter Tension Frequency Electrical

EMX 08

Maximum pressureMaximum flow rateMaximum suction heightViscosity rangeFilterTension

FrequencyElectrical connectionPowerWeightTemperatureInsulation

Noise level (1m)

Approvals

EMCRoHS

The EMX pumps open a new way for smallpumps with outstanding performances. Theconstruction is very unique, only stainless steeland PTFE are in contact with the liquid. Itsuniversality makes it as a must for high­techapplications as for example printing systemswith their variety of inks of different natures !

Electromagnetic pump Application fields :

­ Medical and laboratory devices­ Cleaning equipment­ Printing systems­ Lubrication­ Household equipments­ Drink dispensing

GOTEC SA Rue des casernes 59 CH­1950 SION Tel. +41­27­205 72 05 Fax:06 www.gotec.ch sales@gotec.ch

Technical data

: 0.8 [bar]: 9 [l/h]: 3 [m]: 1…600 [mm2/s]: Mesh 100: 230 [V]~ (110 [V], 24 [V],12 [V])

: 50 [Hz], (60 [Hz]): 3 x 6.3 [mm] x 0.8 [mm]: 18 [W]: 95 [g]: 1°...50 [°C]: Class F­100% ED / 20 [°C](Class H on request)Class I

: open flow = ~35 [dB(A)],Max. pressure = ~29 [dB(A)]: EC conform toEN60335­1 (ED.4),CB cert. Nr. CH­4364,(UL on request)

: Conform to 2004/108/EC: Conform to 2002/95/EC

Nominal rated data :

GOTEC SA Rue des casernes 59 CH­1950 SION Tel. +41­27­205 72 05 Fax:06 www.gotec.ch sales@gotec.ch

Performances tested with water, at ambient temperature (Tension : 230V/50Hz)

Nominal values, may vary with power supply.

Materials in contact with the l iquid :

Body & connectors : 1.4057Piston : 1.4057­CrSprings : 1.4401Valves tips : PTFE

Electric wiring diagram :

Large choice of materials & optionsNote :

Please, refer to instruction manual for more installation details. For more information, visit our website► www.gotecpumps.com ◄

Open flow rate

The coil (motor) is warming up when the pump is running. The temperature’s riseincrease the resistance of the coil and so decrease the performances.

Performances :

Heating & flow :

Fuse and diode are necessary

Additional information :