ECO-DESIGN ITD Grant Agreement n°:298131 Project IRIDA ... › docs › results › 298 › 298131 › ... · ECO-DESIGN ITD Grant Agreement n°:298131 Project IRIDA Figures and

ECO-DESIGN ITD Grant Agreement n°:298131 Project IRIDA

Figures and images for the final report

This document is the property of one or more Parties to the Clean Sky Eco-Design ITD consortium and shall not be distributed

or reproduced without their formal approval 1 / 8

Figure 1: Electrical resistance measurements before and after failure

PU

ECO-DESIGN ITD Grant Agreement n°:298131 Project IRIDA

Figures and images for the final report

This document is the property of one or more Parties to the Clean Sky Eco-Design ITD consortium and shall not be distributed

or reproduced without their formal approval 2 / 8

Figure 2: Stringer manufacturing trials

Figure 3: The two active cooling concepts for the nacelle tool

ECO-DESIGN ITD Grant Agreement n°:298131 Project IRIDA

Figures and images for the final report

This document is the property of one or more Parties to the Clean Sky Eco-Design ITD consortium and shall not be distributed

or reproduced without their formal approval 3 / 8

Figure 4: Results of the thermal analysis for the nacelle tool

Figure 5:Alternative infusion strategies studied

ECO-DESIGN ITD Grant Agreement n°:298131 Project IRIDA

Figures and images for the final report

This document is the property of one or more Parties to the Clean Sky Eco-Design ITD consortium and shall not be distributed

or reproduced without their formal approval 4 / 8

Figure 6: Indicative results of the mould filling simulation for an infusion strategy

ECO-DESIGN ITD Grant Agreement n°:298131 Project IRIDA

Figures and images for the final report

This document is the property of one or more Parties to the Clean Sky Eco-Design ITD consortium and shall not be distributed

or reproduced without their formal approval 5 / 8

Figure 7 : The complete IRIDA prototype tool

Figure 8 :The main infusion tool

ECO-DESIGN ITD Grant Agreement n°:298131 Project IRIDA

Figures and images for the final report

This document is the property of one or more Parties to the Clean Sky Eco-Design ITD consortium and shall not be distributed

or reproduced without their formal approval 6 / 8

Figure 9 :The manufactured main infusion tool and the original design

Figure 10 :Thermal imaging of the tool showing the clear drop of temperature in the stringer placement area

Figure 11 : The fiber preform inside the tool

ECO-DESIGN ITD Grant Agreement n°:298131 Project IRIDA

Figures and images for the final report

This document is the property of one or more Parties to the Clean Sky Eco-Design ITD consortium and shall not be distributed

or reproduced without their formal approval 7 / 8

Figure 12 :The nacelle demonstrator

Figure 13 :Dimensional accuracy measurements

ECO-DESIGN ITD Grant Agreement n°:298131 Project IRIDA

Figures and images for the final report

This document is the property of one or more Parties to the Clean Sky Eco-Design ITD consortium and shall not be distributed

or reproduced without their formal approval 8 / 8

Figure 14 :Macrographs of the cross section cut out of the demo part showing major defects