easyFlow M - agrotop...easyFlow container adapter stays on the container! Stop flow by turning counter clockwise First turn lever up Strech out while mounted! 7. Rinsing interfaces
Post on 23-Feb-2020
3 Views
Preview:
Transcript
First push to unlock!
Then pull to lock container
Press first to break the seal
Then pull to lock container
Adjust (optional)
2. Connect container
3. Lock container 4. Start dosing
Then slowly turn clockwise
First turn lever horizontal
To the sprayer
Rinsing water max. 6 bar!
Avoid over-pressure!
Ope
n al
l cou
plin
gs a
nd v
alve
s bet
wee
n sp
raye
r and
eas
yFlo
w M
, tur
n on
pum
p!
For further information go to https://www.agrotop.com/en/easyflow/easyflow-m/
easyFlow M closed transfer Dosing / partial discharge
1. Connect to sprayer
Outlet must have free flow
at all times! Otherwise risk
of damage!
BA-056-01 Rev: 06/2018
Wanted volume OK
Then press rinsing lever
b. Push to unlock
a. Turn lever down
easyFlow container adapter stays on the container!
Stop flow by turning counter clockwise
First turn lever up Strech out
while mounted!
7. Rinsing interfaces
b. Push to unlock
c. Remove
8. Disconnect container, order a, b, c Strech out container adapter!
5. Stop dosing 6. Transfer partial volume
a. Turn lever down
BA-056-01 Rev: 06/2018
top related