Transcript
DISCOVERYL A N D R O V E R
DISCOVERYL A N D R O V E R
accessories
Certificate No. RS20282
This section includes our range ofAccessories suitable for the Land RoverDiscovery. We also include accessories
which suit popular modifications toDiscovery vehicles - so don’t think it’s a
mistake if you see something that doesn’tusually fit original vehicles, because you
can bet that someone has a modifiedvehicle it will fit.
You’ll also see some items arephotographed on other Land Rover vehicles
– this is simply because we didn't have aDiscovery to hand when the photographercalled in – so just make sure you use theright reference number when ordering or
check with one of our expert staff who willbe able to advise on correct fitment.
PARTS: Bearmach produces vehicle-specific catalogues listing our vast range
of parts suitable for all Land Rovervehicles – make sure you get the latest
edition for your particular vehicle.
NOTE: Manufacturers parts numbers areused for reference purposes only.
Every Land Rover model range ever made has been developed and improved continuouslyduring its life cycle – and the Discovery has been the epitome of this philosophy. Development
has always focussed on upgrading the technical specification to enhance off-road capabilitiesand performance and to broaden the vehicle’s appeal.
The Discovery model range, launched in 1989, was designed to compete in theburgeoning leisure segment of the 4x4 market. Initially only available in 3 door configurationyet it competed well in the family car market with its comfortable ride and an interior designedby Sir Terence Conran. But just a year after launch the 5 door model became available andfuel injection replaced carburettors.
The Discovery utilised a Range Rover chassis and featured coil sprung live axles at thefront and rear. Both diesel and petrol versions were available – a turbocharged four cylinder2.5 litre, 200Tdi diesel engine and the tried and trusted 3.5 litre V8i petrol engine. Thedriveline consisted of the LT77 5-speed manual gearbox and an LT230T transfer gearbox.
1994 saw more noticeable improvements with a redesigned exterior, including newheadlamps, and design enhancements to the interior. The 300TDi engine was introduced andABS was now available. The R380 gearbox was introduced and automatic transmission wasavailable with the diesel engined models.
As the 90s wore on competition got stiffer but Land Rover had “Project Tempest”underway – this culminated in 1998 with theintroduction of “New Discovery” – now knownas Series 2. The new car kept its strongestelements like the distinctive bodyshape but vitalimprovements in handling and build qualitywere addressed.
However, it was the all new TD5 enginethat epitomised the quality of the Series II andthe petrol V8 version was just as revolutionary.Hill Descent Control was fitted as standard andoptions included Active CorneringEnhancement and Self-Levelling Suspension.
The biggest leap in technology yet tookplace in 2004 with the launch of the
Discovery 3 – but that’s another story…
CONTENTS PAGEFront End Protection 48~50Lamp Guards 51DISCOVERY 3 52Side Steps 53~54Exterior Styling 54~55Off-Road Protection 56~57Roof Racks & Towing 58Performance EquipmentHeavy Duty Suspension 59~61Engine 62~63Brakes 64Axle & Steering 65Electrical 66Interior AccessoriesDog Guards 66Mats 67Gear Knobs & Steering Wheels 684x4 EssentialsWheels, Covers & Tyres 102~103Winches & Winching Equipment 106~109Driving Lights & Torches 114~115Coolers 117Toys & Gifts 118~120Books 122Price List 123~129
Disco_10th_access_06 15/11/05 4:19 PM Page 47
www.bearmach.com to order – contact official stockists
acce
ssor
ies
48
nudg
e bar
sDISCOVERY
L A N D R O V E R Parts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc
FRONT END PROTECTIONAll of our black, nylon coated steel Nudge Bars, Bull Bars and ‘A’frames give an aggressive and purposeful look and offerimproved front end protection due to theirstrength. Spot light mounting points are alsoincluded on most. The units bolt to theexisting holes on the chassis/bumperalthough some cutting of the front spoilermay be required.
Note: For vehicles fitted with side lift jacks useextension BA 2140 (Optional).
WRAPAROUND NUDGE BARBased on the new styled ‘A’ frame bar BA 102 but with additionalwraparound wings protection. Finished in highly polished stainless steel, with31/2" wide spot-light mounting plate. (For fitment from 1994 - 1998, a newplinth part no. STC 8836AA is also required).
BA 106CS Wraparound Nudge bar with spotlight mounting. Finished inhighly polished Stainless Steel.
DISCOVERY ‘A’ FRAME‘A’ Frame to fit Discovery 1 and 2. Made of steel
and easy to fit. Includes spotlight mounting brackets. Mountingpoints pick up behind crush cans as per the original – some cutting of the
front spoiler is required.For fitment to Airbag models please consult your Land Rover dealer.
BA 102 Discovery ‘A’ Frame in Black Nylon Coated finish
BA 102
‘A’ FRAME WITH SUMP PROTECTIONA heavy duty stylish ‘A’ frame bar with additional sump protection,and 31/2" wide spot-light mounting plate. Manufactured in sturdy 2" tube. Will fit all Discovery vehicles except Disco 2. No drilling required.
BA 118S ‘A’ frame, In polished stainless steel, with additional sumpprotection. Not suitable with BA 2144 winch mount.
BA 118‘A’ frame, Black nyloncoated for a durable finish,with additional sumpprotection.
For fitment to Airbag modelsplease consult your LandRover dealer
BA 118S
BA 106CS
BA 118
‘A’ FRAMEA new styled ‘A’ frame bar (withoutsump protection), with 31/2" widespot-light mounting plate.Manufactured in sturdy 2" tube andBlack Nylon Coated. Will fit allDiscovery vehicles except Disco 2.No drilling required.
BA 117 ‘A’ frame
For fitment to Airbag models please consult your Land Rover dealer
Disco_10th_access_06 15/11/05 4:19 PM Page 48
find your local stockists on back page www.bearmach.com
acce
ssor
ies
49
nudg
e bar
s
DISCOVERYL A N D R O V E RParts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc
BA 103S
TUBULAR WRAPAROUNDNUDGE BARwith Integral Sump Guard
A stylish bar with integral SumpGuard and Spoiler protectors.Manufactured in 11/2" tube.Features Spotlight mounting. Nocutting of the front spoiler isnecessary. Will fit Discoveries up toDisco 2.
This model is not suitable for use with Winch Mount BA 2144. If you wish tofit Winch Mount BA 2144 use Nudge Bar BA 106CS (page 1).
BA 106A Wraparound Nudge bar in Black Nylon Coated FinishBA 106B As BA 106A but includes fixed lampguards.
For fitment to Airbag models please consult your Land Rover dealer.
BA 106A
BA 106B
DISCOVERY 2 WRAPAROUND NUDGE BARWraparound nudge bar with removable lamp guards. Features spot lampmounting brackets. Mounting points and fitting as BA 102. (Lamp guards not illustrated)For fitment to Airbag models please consult your Land Rover dealer.
BA 101 Discovery 2* Nudge Bar in Black Nylon Coated finishBA 101S As above but finished in polished Stainless Steel. (No lamp
guards)
* (Including vehicles 03MY on wards).
BA 101
FOR DRIVINGLAMPS TO FIT OURNUDGE BARS SEEPAGE 114 IN THE4x4 ESSENTIALSSECTION
DISCO 2 ‘A’ FRAME
Highly polished stainless steel, spotlight mounting included.To suit Discovery 2 (including vehicles 03MY onwards)
BA 103S Stainless Steel ‘A’ Bar
OEM SOFT PLASTIC ‘A’ BARSThese bars are as fitted as original equipment. They offer robustvehicle protection as they are a steel frame construction coveredin a thick rubber coat to absorb impact. More pedestrianfriendly than other bars. Easily fitted to the following models.
DISCOVERY 2STC50021 – Soft ‘A’ Bar to fit Discovery 2 pre 03MYSTC53174 – Soft ‘A’ Bar to fit Discovery 2 after 03MYSTC50020 – Soft Full Bar to fit Discovery 2 pre 03MYSTC53173 – Soft Full Bar to fit Discovery 2 after 03MYSTC53181 – Metal Front Lamp Guards to fit the full bar STC53174
Disco_10th_access_06 15/11/05 4:19 PM Page 49
www.bearmach.com to order – contact official stockists
acce
ssor
ies
50
DISCOVERYL A N D R O V E R Parts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc
BUMPER WITH INTEGRATEDWINCH MOUNTMade of 6mm steel folded plate and polyester coated. No drilling ormodification required other than the removal of the front spoiler. Theintegrated bumper is fully compatible with the Bearmach aluminium sumpguard (BA 083A).
BA 175 – Bumper with Integrated Winch Mount
The BA 175 can take the following winches: Warn 6000 or 8000 “M” and“Mx” series; XD 9000 and the Superwinch X6 & X9 as well as all the T-Max range (not come-up winch). Does not suit the Huskey winch.
The BA 175 can be further enhanced by the addition of:
‘A’ FRAMEThis ‘A’ frame is easilyadded to the integratedbumper and winch mountabove. Easily bolts on.Black nylon coated andwith the facility to mountspot lamps.
BA 175A – ‘A’ frame tosuit BA 175
‘BULL BAR’This Bull Bar is easily added to the integrated bumper and winch mountabove. Easily bolts on. Black nylon coated and with the facility to mount spotlamps.
BA 175B – Bull Bar to suit BA 175
WINCH BUMPER [DISCO 2]
Made from 6mm folded steel and powder coated for a durable finish.Designed specifically for the Disco 2 this winch bumper is extremely strongyet stylish. Front foglights need to be removed or re-positioned to fit bumper.
Accepts same winches as BA 175.
BA 199 – Bumper with Integrated Winch MountBA 199A – Bumper with Integrated Winch Mount to
suit Disco 2 up to 03 (Facelift) models
BA 175
BA 175A
BA 175B
BA 199
DISCREETWINCH PLATE
Suits Discovery 2.Zinc plated finish,accepts Warn6000/8000 orXD9000 winches. Nodrilling required butrequires removal of
wire mesh in spoiler and some cutting of spoiler. To suit Disco 99 - 02and will also fit Facelift Disco 2003-on (not compatible with Come-Upbrand)
BA 176 – Discovery Discreet Winch Plate
WINCHING EQUIPMENTFor the serious off-roader a winch can be an essential partof the kit.Bearmach stocks a wide range of winching accessorieswith winch plates to suit all models and fitments.
WINCH MOUNTChassis mountedwinch plate to suitDiscovery will take6,000 or 8,000lbWarn winches. Fitsdiscreetly and withonly minimum cuttingof spoiler required.To fit Disco 89-98
BA 2144 – Discoverychassis mounted winchplate
BA 2144
BA 176
SEE OURFULL RANGEOF WINCHES IN
THE 4X4ESSENTIALSSECTION
winc
h bu
mper
s
Disco_10th_access_06 15/11/05 4:19 PM Page 50
find your local stockists on back page www.bearmach.com
acce
ssor
ies
51
DISCOVERYL A N D R O V E RParts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc
FRONT LAMP GUARDS (Discovery Facelift Version)
Made of steel and nylon coated, all brackets are nylon coated, all bolts arestainless. The front light guards incorporate a power wash cut out designed toensure the vehicle’s headlamp washers are not impeded. Units can beremoved for easy cleaning of headlights.The steel brackets which fix the lamp guards to the body work, pick up offexisting holes, and NO DRILLING is required.
BA 104 Pair of removable Front Lamp Guards to suit Discovery up to 1999
BA 104A Pair of hinged Front Lamp Guards to suit Discovery 2from 1999 - 2002
DISCOVERY 2 – Original EquipmentThe following range of accessories supplied as originalequipment for the Discovery Series 2 from Land Rover – soyou can be assured of their quality and design.
STC50026 Front Lamp Guards in plastic (Set of 2) – up to 03MYSTC50027 Rear Lamp Guards in plastic (Set of 4) – up to 03MYSTC53181 Metal Front Lamp Guards to fit the full bar STC53174
(Set of 2) – 03MY onSTC53194 Upper Rear Lamp Guards in plastic (Set of 2) –
03MY onVUB500520 Lower Rear Lamp Guards in plastic (Set of 2) –
03MY onSTC50243 Spot Lamp Bar, Black Nylon CoatedSTC50244 Spot Lamp Bar, Stainless Steel
BA 147
BA 147S
BA 147S
BA 104 BA 104A
Lamp Guards are more than just a cosmetic addition to your vehicle.They help protect your valuable lights from debris thrown up bytraffic in front of you, from those inevitable knocks when off-roadingor even in the supermarket car park.
LAMP GUARDS
REAR LAMP GUARDS – [DISCO 2]Our Rear Lamp Guards for the Disco 2 are available in two different styles.Choose from either the Black Powder Coated (High level C pillar lights only)or the Chrome plated Stainless Steel set which also includes protection forthe lower bumper lights. To suit Disco 99 - 2004.
BA 147 Disco 2 Rear Lamp Guards (Set of 2)BA 147S Disco 2 Rear Lamp Guards (Set of 4)
REAR LAMP GUARDSMade from mild steel with a durable, powdercoated finish, these rear lamp units fix withoutdrilling, as the brackets slip behind the lampunits. Sold in pairs.
BA 105 – Discovery Rear Lamp Guards
BA 105
STC50026
STC53194
VUB500520
lamp
guar
ds
Disco_10th_access_06 15/11/05 4:19 PM Page 51
www.bearmach.com to order – contact official stockists
acce
ssor
ies
52
DISCOVERYL A N D R O V E R Parts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc
DISCOVERY 3 – Original EquipmentThe following range of accessories is supplied as originalequipment for the latest Discovery from Land Rover – so youcan be assured of their quality and design.
YWJ500201 Towing ElectricsVUB501430 Tow BarVUB502390 Air Deflectors (Set of 4)DGJ500010PMA Door Protection StripsVUB501200 Lamp Guards Front (Set of 2)VUB501210 ‘A’ Bar (no winch)VUB501380 Rear Lamp Guards (plastic)VUB502590 Rear Lamp Guards (aluminium)EBN500041 Sills Scuff Protection in Stainless SteelVTK500010 Side StepsVTD500010 Side Tubes – BlackVTD500020 Side Tubes – Same design as VTD500010 above
but in Stainless SteelEAH500050PMA Rubber Mats – Front LHDEAH500052PMA Rubber Mats – Front RHDEAH500070PMA Rubber Mats Rear Luggage CompartmentEAH500100PMA Rubber Mats Rear 3rd RowVCF500060PVJ Front Seat CoversVCF500151PVJ Rear Seat Covers – 3 individualVCF500070PVJ Rear Seat Covers 60/40 splitVCF500150PVJ Rear Seat Covers 3rd Row
VUB501200
VUB502590 VUB501380
VTD500020
EBN500041
VTK500010
3
STAINLESS STEEL SIDE STEPSA new style side step, designed for Disco 3 , P38and L322 Range Rovers. They have a polishedstainless steel plate, with an aluminium underconstruction. Rubber anti-slip strips ensure saferexit and entry to the vehicle. TUV approved.BA 4510 – Stainless Steel Side Steps
SIDE PROTECTION STRIPSThese rubber strips are easily fitted to yourvehicle to aid protection against minor dings andscrapes. With a chrome insert they are alsopleasing on the eye.BA 4400 – Discovery 3 Side Protection Strips
BA 4510
DGJ500010PMA
disco
very
3
Disco_10th_access_06 15/11/05 4:19 PM Page 52
find your local stockists on back page www.bearmach.com
acce
ssor
ies
53
DISCOVERYL A N D R O V E RParts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc
DISCO 2 SIDE STEP WITH INTEGRAL MUD FLAPThese genuine side steps are easily fitted to the Disco 2. Manufactured inStainless Steel these side steps have the added advantage of an integral frontmud guard to make a practical and aesthetic addition to your Disco 2.
STC50032 – Side Step for Disco 2
STAINLESS STEEL SIDE STEP
Suitable for ALL Discoveries. Made from mirror polished stainless tube andtread plate with a raised anti-slip surface. Two holes to be drilled throughoutrigger.
BA 100S – Side Step in Stainless Steel
SIDE STEP WITH RUBBER TREADGalvanised steel frame construction with a dimpled, moulded rubber treadinset. Also has a rubber edge moulding.Easy to install as it picks up on body mounting bolts in the chassis, and twoholes drilled through the outrigger.(NOT LSE Range Rover)
BA 100 – Side Step with Rubber Tread
SIDE STEP WITH ALUMINIUM TREADSteel frame construction galvanised coating with aluminium tread plate andrubber edge moulding.Easy to install as it picks up on body mounting bolts in the chassis, and it isonly necessary to drill two further holes on each side to ensure you have avery solid chassis mounted side step.
BA 092 – Side Step with aluminium tread
BA 092
BA 100
BA 100S
STC50032
BA 129
SIDE STEPSAll Bearmach side steps are designed not onlyto ease entering and exiting the vehicle, butalso help to protect the vehicle from scuffs,dings and other annoying marks picked upthrough everyday use. Easily fitted to thechassis of the vehicle, with minimalmodification (underneath vehicle), the sturdysteps also contribute to the vehicle’sappearance. ALUMINIUM
SIDE STEP
A new style side step to fit theDiscovery model. An aluminium
extrusion with rubber tread means thatthis step is light weight, strong and durable.
BA 129 – Aluminium Side Step (Extrusion)
side s
teps
Disco_10th_access_06 15/11/05 4:20 PM Page 53
www.bearmach.com to order – contact official stockists
acce
ssor
ies
54
DISCOVERYL A N D R O V E R Parts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc
WHEEL ARCH EXTENSIONSFibreglass Wheel Arch Extensions to allow larger wheel and tyre fitments formore effective off-road use. Available in standard and XL sizes. Some cuttingof arches and bodywork may be required.
BA 3704 Std Wheel Arch Extension 2 Door Disco 1BA 3705 XL Wheel Arch Extension 2 Door Disco 1BA 3706 Std Wheel Arch Extension 4 Door Disco 1BA 3707 XL Wheel Arch Extension 4 Door Disco 1
REAR STEPMade from heavy gauge steel and bar, zinc plated and yellowed to give anextra durable finish. No drilling required, bolts directly onto crossmemberand can be used on most vehicles with tow bars. A very functional accessory.(See the Towing section for drop plates).
BA 172 – Rear Step
BA 172
EXTERIOR STYLINGA broad range of accessories to improve theappearance of your Discovery while offeringpractical protection and improvements.
BA 2067
WHEEL ARCH EXTENSIONSFibreglass wheel arch extensions available with or without notches cut out toaccommodate the rubbing strips. Supplied in black but can easily be sprayedto match vehicle colour.NOTE: The photograph shows a similar product fitted to a Range Rover
BA 2066 Wheel Arch Extensions to fit 5 door Disco (without notches)BA 2067 Wheel Arch Extensions to fit 3 door Disco (without notches)BA 2066A Wheel Arch Extensions to fit 5 door Disco (with notches)BA 2067A Wheel Arch Extensions to fit 3 door Disco (with notches)
SIDE STEP with MUDFLAPSA very practical sidestep for the Discovery 2, with rubber tread and with amoulded mudflap integrated into the step at the rear. A high quality originalequipment item.
STC50030 – Sidesteps with integrated mudflaps to suit Disco 2
REAR STEP KITRear Step Kit as fitted as originalequipment. Includes hydraulic liftramp and all necessary fittings.(NOT for Disco 2).RTC9505AC – Complete Rear
Step Kit.
REAR STEP SERVICE KITThis service kit contain all fitments needed to restore the rear step to full working order in the event of the hydraulic lift failing.RTC9593AA – Hydraulic lift service kit for Disco rear step.
WHEEL ARCH KITThese Wheel Archextensions are ideal whenfitting wheels and tyreswhich are wider than thebodywork. They fit withany existing sidemouldings and aremanufactured in a highdensity plastic. Easilyfitted with all fixingssupplied.
BA 2069 – Wheel ArchKit to suit Disco 2
exter
ior st
yling
Disco_10th_access_06 15/11/05 4:20 PM Page 54
find your local stockists on back page www.bearmach.com
acce
ssor
ies
55
DISCOVERYL A N D R O V E RParts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc
WIDE SIDEMOULDING
To fit 3 door Discovery.Side mouldings designedto fit on lower side ofvehicle. No drillingrequired. Protects vehiclefrom car park knocks andstone chips.
BA 2056 – Wide SideMoulding, 3 Door
BA 2056
SIDE MOULDING – 3/5 DOORNo drilling required. Attractive functional accessory to protect and enhanceyour vehicle.
BA 2054 – Side Moulding, 3 Door or 5 Door - Disco 1 only
BA 2054
NEW!CLEAR INDICATOR KITSGive your series 1 or 2 Discovery amore up-to-date appearance with theseclear indicator lenses. Coupled withorange bulbs (supplied) these kitsdirectly replace the existing orange lensand satisfy all legal requirements.
All the following Clear lenses are supplied complete with bulbs.AMR6511W 300TDi Front LeftAMR6512W 300TDi Front RightPRC9306W 200TDi Front RightPRC9307W 200TDi Front LeftAMR6509W 200/300 TDi Rear Left (Bumper)AMR6510W 200/300 TDi Rear Right (Bumper)
XGB10028 P38 style Side RepeaterXGB100310L Disco 2 Side Repeater
REPLACEMENT BULBSBR 1303A Indicator Bulbs in Orange – Front & RearXZQ100190L Indicator Bulbs in Orange – Side RepeaterBA 5128 Red Bulb suitable for AMR6509W and AMR6510W
PERSPEXWEATHER-SHIELDSMade from perspex, easilyfits to passenger anddriver’s doors to stop rainpenetration when on themove. Reduces draughtsyet still allows goodventilation.NOTE: The photographshows a similar productfitted to a Freelander
BA 2065 For Discovery up to 1999 (pair)BA 2065A For Discovery rear doors up to 1999 (pair)BA 2087 For Discovery 2 (pair)BA 2087A For Discovery 2 rear doors (pair)
BA 2065
MUD FLAPSEssential equipment to preventdamage from debris thrown up by thetyres and to minimise water spraywhen driving on-road. Made from aflexible, hi-density rubber, these Kitsconsist of a pair of Mudflaps plus allbrackets and fittings. To fit Discoverymodels 89-98.
RTC6820 – Front Mudflap kitRTC6821 – Rear Mudflap kit
XS BODY KITGive your Discovery the XS lookwith this set of of wheel arch andside mouldings. Manufactured fromhigh density plastic with a chromeinfill strip and supplied withnecessary fixings.
BA 2060 – XS Body Kit forDiscovery models 89-98 (5 Dooronly)
SIDE MOULDING –5 DOOR
No drilling required.Attractive functionalaccessory to protect andenhance your vehicle.
BA 2054/Side Moulding, 5 Door –Disco 2 only
BA 2054/
exter
ior st
yling
Disco_10th_access_06 15/11/05 4:20 PM Page 55
www.bearmach.com to order – contact official stockists
acce
ssor
ies
56
DISCOVERYL A N D R O V E R Parts and Accessor ies su i tab le for Al l Land Rovers f rom BEARMACH Plc
DIFF GUARD
Easy to fit, applicable to all models with standardaxles, Zinc plated for corrosion resistance NODRILLING required.
BA 121 – Diff GuardBA 121S – Diff Guard in Stainless Steel.
SUMP GUARDS
Made from Heavy Duty 7mm Aluminum plate andwith 6mm fixing bracketswhich are zinc coated forextra corrosion resistanceThe Aluminum plate has 9 vent holes (38mm dia) to allow for ventilation,and to allow excess water to drain.
NOTE: The top photograph shows a Sump Guard fitted to a Discovery with a nudge barfitted and the photograph above shows a Sump Guard fitted to a Defender toillustrate the vent holes
BA 083A Fits Discovery & RR classic (will also fit Disco with integralwinch mounting. Will not fit with BA 2029)
BA 083B Fits Discovery & RR classic with nudge bar fitted
NOTE: BA 083B Fits with our own range of nudge bars and A frames only.
BA 083
BA 083B
NOW AVAILABLEIN
STAINLESSSTEEL
NOTE: Bearmach can often prepareprotective panels to specific
requirements – please phone for details
BA 121A
OFF ROAD PROTECTION
BA 125
UNDERBODYVULNERABLEAREAS
Sump
Drag Link
Front Diff
Sills
Rear Diff
Fuel Tank
If you intend to take your Discovery off-road you reallyshould consider protecting the vulnerable areasunderneath the vehicle such as the diff, fuel tank, sump,steering bars etc. Bearmach make a variety of guards toprotect such areas and we are constantly up-dating anddeveloping new guards for all Land Rovers. Bearmachunderbody protection is designed and manufactured to thehighest standards and will give you peace of mind whentackling the roughest terrain.
BA 121
FRONT DIFF GUARD
To suit Discovery 2, Zinc plated. Easy to fit, bolton, no welding or drilling required.NOTE: The Diff Guard in the photograph is only coloured
for clarity
BA 121A – Front Diff GuardBA 121AS – Front Diff Guard in Stainless Steel
HEAVY DUTY DIFF GUARDA new style Diff Guard that offers improved protection. Made from 5mmsteel and finished in zinc and yellow, this HD diff guard wraps entirely aroundthe diff giving maximum protection. Fits front and rear of all Discos up to2005. Easy to fit and Zinc plated to resist corrosion.
BA 125 Diff Guard for Discovery 1 & 2 (not LHD)
off-r
oad
prot
ectio
n
Disco_10th_access_06 15/11/05 4:20 PM Page 56
top related