Development Strategic Solutions

Worldwide Economic Development Technologies

(WEDT)

A Development Strategic Solutions Company

1000 N West StreetSuite 1200Wilmington, Delaware 19801United States Of America

© 2008 All rights Reserved

Confidentiality and Non-Disclosure Agreement

The undersigned acknowledges that the information provided by Worldwide Economic Development Technologies, LLC (“WEDT”) in this presentation is confidential; therefore, undersigned agrees not to disclose any information herein without the express written permission of WEDT.

The information contained in this presentation is proprietary and intended only for the persons to whom it is transmitted by WEDT. Any reproduction of this presentation, in whole or in part, or the divulgence or use of any of its contents, without the prior written consent of WEDT is strictly prohibited. Receipt or possession of this presentation does not convey any rights to disclose it contents, in whole or in part, to any third party.

It is acknowledged by the undersigned that information to be furnished in this presentation is in all respects confidential in nature, other than information which is in the public domain through other means, and that any disclosure or use of any confidential information by the undersigned shall cause serious, irreparable harm and damage to WEDT.

Signature

________________________Name (typed or printed)

________________________Date

Disclaimer

This presentation does not constitute an offer to sell any securities and any representation to the contrary is unlawful.

The information contained in this presentation was obtained from sources believed to be reliable, but is not guaranteed as to its accuracy by WEDT and WEDT assumes no liability for the use of any information contained herein.

WEDT’s Principals and Advisory Team

Deniece Jordan-Walker, Esq. United StatesGeneral Counsel and Chief Financial Officer

WEDT: Your Answer to Development Strategic Solutions that Work

The WEDT system provides superior, sustainable, customized development solutions that ensure efficient, on-time , in-budget construction. The WEDT system is a vertically integrated construction system that employs state-of-the-art , environmentally friendly technology to significantly reduce construction material storage issues at job sites and construction completion schedules, and increase productivity and profitability. The WEDT system can be efficiently deployed to accomplish a key corporate and public mission: The creation of local jobs in manufacturing and construction that are essential to sustainable economic stability and growth in emerging economies. To accomplish this mission, WEDT can establish partnerships with existing firms in the region and utilize the construction system to fast track development projects such as housing, hotel, water/waste treatment facilities, hospitals, municipal buildings, blast freezing facilities, warehousing, and infrastructure projects.

Strategic Development Solutions

Summary of Strategic Solutions Consulting

Project Management, Architect & Developer ConsultingManufacturing/Marketing ConsultingTechnology and Construction Systems ConsultingDevelopment Agency ConsultingPlanning Agency ConsultingFinancing Consulting

Summary of Services Delivery Schedule

Assessment of advanced technology and construction systems best-suited to complete project on-time and in-budget.Establish strategic alliances needed for technology transfer, construction and equipping manufacturing facility in project locale, and training local residents for employment at the facility and on job sites. Develop marketing system for continued viability of manufacturing facility in host state to increase employment and national productivity. Project Management of concrete and construction systems delivery and installation.

Development Products

Structural Support Technology

Rebar

WEDT utilizes Fiber Reinforced Composite Re-bar for construction. This re-bar is stronger and lighter than steel and is corrosion proof. The re-bar construction system provides long lasting foundations and structures in all environments.

Non-corrosive - virtually eliminates corrosion from inside concrete structures Non-magnetic - will not interfere with electrical or communication signals Higher tensile strength than steel

Concrete Delivery and Installation System for Buildings, Sidewalks, Etc.

Concrete Delivery system & siloTheft protection of aggregate on job site

Concrete is mixed and discharged as it is needed.No "hot" loads.No loss of strength because of hydration that took place in the truck.No equipment tempering with water is required.The most versatile concrete production system that is available.Low initial cost of equipment.High production rates of mixed concrete for the size and price."On Demand" concrete production.Instantaneous mix design changes.Low slump mixes are easily produced.Metered delivery for retail concrete delivery.Simple equipment to operate and maintain.No scales requiring constant calibration.Ideal for job site and remote applications.Quick set up time for standard

Concrete Delivery and Installation System for Roads

Composite Pipe(Drinking water, sewerage, oil, gas, toxic chemicals)

Composite Pipes easily resist handling damage and field abuse such as produced by wheel loads of heavy equipment or tool impact. The incredible strength of Composite Pipes can be explained by the multi-ply structure of the pipes.This unique structure dissipates the stress waves of impact energy around and along the pipe body rather that through the pipe wall.No other pipe possesses this unique feature which makes the pipe wall structure virtually indestructible.A quarter inch (6 mm) wall thickness pipe can resist tensile end loads as great as 12,000 lbs. (5.4 tons) per circumferential inch, while simultaneously resisting circumferential hoop loads as great as 12,000 lbs per lineal inch.The Twin Lock™ Coupler System enables the Composite Pipes to be sealed and connected to provide a pipeline with the strength and integrity equivalent to that of a welded steel pipe. However, use of the Twin Lock™ Pipe Coupler System enables the pipes to be joined and sealed 20 times faster.

Polygon Composite Pipe(21st century transportation tunnels automobiles, trains, etc underground or under water.)

The Maglev 2000 can operate in the open air, or in underground tunnels. Using a low-pressure tunnel will make it possible to get from city to city rapidly . 300 miles per hour + capability.

Fiber Optic Wiring

Fiber Optic Wiring

Benefits of Fiber-OpticsDisplacement of copper Future proofing Return on investment (which will continue to grow exponentially) Unlimited bandwidth Simple installation

Solar Thermal Concentrating Systems

By using mirrors and lenses to concentrate the rays of the sun, solar thermal systems can produce very high temperatures—as high as 3,000 degrees Celsius. This intense heat can be used in industrial applications or to produce electricity.Solar concentrators come in three main designs: parabolic troughs, parabolic dishes, and central receivers. The most common is parabolic troughs—long, curved mirrors that concentrate sunlight on a liquid inside a tube that runs parallel to the mirror. The liquid, at about 300 degrees Celsius, runs to a central collector, where it produces steam that drives an electric turbine.

Field & Track Solar Grids

Wind Turbines

Modern electric wind turbines come in a few different styles and many different sizes, depending on their use. The most common style, large or small, is the "horizontal axis design" (with the axis of the blades horizontal to the ground). On this turbine, two or three blades spin upwind of the tower that it sits on.

Small wind turbines are generally used for providing power off the grid, ranging from very small, 250-watt turbines designed for charging up batteries on a sailboat, to 50-kilowatt turbines that power dairy farms and remote villages. Like old farm windmills, these small wind turbines have tail fans that keep them oriented into the wind.

Large wind turbines, most often used by utilities to provide power to a grid, range from 250 kilowatts up to the enormous 3.5 to 5 MW machines that are being used offshore. Today, the average land-based wind turbines have a capacity of 1.5 MW.[i][7] Large turbines sit on towers that can be anywhere from 50 to 100 meters tall, and have blades that range from 30 to 50 meters long.[ii][8] Utility-scale turbines are usually placed in groups or rows to take advantage of prime windy spots. Wind "farms" like these can consist of a few or hundreds of turbines, providing enough power for tens of thousands of homes.

Tidal Turbines(underwater electrical energy generation)

Axial-Flow Rotor Turbine: The design of these turbines consist of a concentric hub with radial blades, similar to that of a windmill.Mechanical power is applied directly through a speed increaser to internal electric generator, or through a hydraulic pump that in turn drives an onshore electric

generator.

Rubber Sidewalks

Rubber sidewalks are made of 100% tire rubber.Each square foot of Rubber sidewalks uses the rubber of one entire passenger tire. Each 5 sf pavers keeps five tires out of landfill, and400 square feet keeps over two tons of waste tire rubber from going into landfill.

Tidal Turbines(underwater electrical energy generation)

This technology represents a novel method for generating electricity from a huge energy resource in the sea. It is rare enough for an entirely new energy resource to be developed but even rarer if the technology, as in this case:-produces no pollution and has negligible environmental impact delivers energy to a predictable timetable has the potential to make a major contribution to future energy needs Although the relentless energy of marine currents has been obvious from the earliest days of seafaring, it is only now that the development of modern offshore engineering capabilities coinciding with the need to find large new renewable energy resources makes this a technically feasible and economically viable possibility

Bio Mass Incinerator

An advanced system for waste treatment. (Kiln type Incinerator of Pyrolysis Gasification).Firstly, shredded waste is heated without oxygen in pyrolysis drum and iron/aluminum are recovered.Secondly, pyrolysisproducts (gas and ash) are combusted at high temperature in furnace and the slug is recovered. High performance generation of electricity is achieved.

Bio Mass Incinerator

Bio Mass Incinerator (salable products)

Recycled MetalsThe gasifier will liquefy any metal. Separation of the metals is not required before the reactor, although it does consume energy. The metal that goes into the reactor, either comes out the bottom of the reactor or is removed by the gas cleanup system. Any metals that are recovered are sold to metal recyclers.

Purified WaterAny low-pressure steam (small amount) not used in the process is either condensed or can be used to produce distilled water in a multi-effect distillation unit.

Hydrochloric AcidDuring the gas clean up phase of the process, hydrochloric acid (HCL) gas is absorbed into water and distilled to a 15-20% concentration.

SulfurThe hydrogen sulfide (H2S) in the gas is scrubbed out to make fertilizer grade sulfur using a biological process or alternatively can be converted into sodium bisulfate.

Public Toilet & Shower Facilities (urban)

Futuristic architecture is often achieved through a nice juxtaposition of industrial concrete, plastic glass brick, some high quality black plastic imitation marble, and stainless steel structural supports, where the glass brick also serves to separate the service passage from the main washroom. The use of sensor operated sinks, toilets, urinals, and hand dryers, together with service-installed lighting often adds to the modern aesthetic and functionality. Laundromats can be included.Job creation (attendants/security) 24 hour serviceSolar powered

Play Pump Water System

(1), While children have fun spinning on the Play Pump merry-go-round clean water is pumped (2) from underground (3) into a 2,500-liter tank (4), standing seven meters above the ground. A simple tap (5) makes it easy for women and children to draw water. Excess water is diverted from the storage tank back down into the borehole (6). The water storage tank (7) provides a rare opportunity to advertise in outlaying communities. All four sides of the tank are leased as billboards, with two sides for consumer advertising and the other two sides for health and educational messages. The revenue generated by this unique model pays for pump maintenance. Capable of producing up to 1,400 liters of water per hour at 16 rpm from a depth of 40 meters, it is effective up to a depth of 100 meters. A typical hand pump installation cannot compete with the Play Pump system's delivery rate, even with substantial effort.

Composting Toilet

Composting is the most appropriate method for dealing with human waste and is completely natural. A composting toilet is traditionally a waterless toilet and therefore respects precious water supplies and doesn't create any pollution. In the toilet room there is no chain to pull or button to press, apart from that it's your average toilet.

Some of the key features are...Six removable compost bins housed on a turntable. The turntable is manually rotated once a bin becomes full.The full bin remains inside the system to continue the composting process. Once a composted bin comes around for use again the contents will be reduced to two thirds of it's original volume and transformed into a soil rejuvenating humus. There is no strenuous raking, bending or digging of any fresh wasteVirtually no maintenance. Unlimited capacity ...and the toilet room is always fresh.

Public Toilet (villages/solar powered)

Satellite Waste Treatment

Decorative Pavers (Recycled Plastic Street Lights, railings)

Transportation (can run on dedicated lanes computerized)

Technology and Construction Systems’ Commercial Applications

3 – 4 Story Apartment BuildingsHi Rise Apartment Buildings with ParkingShopping MallsOffice BuildingsHotel/ResortsSchoolsHospitalsMedical ClinicsNursing Homes and Senior HousingYouth HomesDetention FacilitiesWarehousing

Commercial Applications Renderings

Residential Roof Solar

After installation, solar panels absorb the sun's rays, even on cloudy days, and convert sunlight into usable electrical energy. Next, an inverter converts the DC current from the solar panels to AC current for use throughout the home. The solar system is connected to the utility grid through a standard utility meter that tracks the net power use while taking into account the electricity production from the solar system.

Residential Roof Solar Panels

3 Story Apartments (Front/rear view)

4 Story Apartments (with solar power)

Condo/Apartment

Hi-Rise (Shopping mall/parking)

Hi Rise (parking/courtyard)

Office/Medical/Mixed Use

Hospital/School/Municipal Building Design

Warehouse

Manufacturing, canneries', Blast Freezing/Chillers, Food Processors

Sidewall Solar Panel (Warehouses/Commercial Buildings)

WEDT: An Innovative Approach to DevelopmentThe professionals at WEDT understand that each project is unique and requires a development and construction plan that can be implemented with time and cost efficiencies. This is especially true in developing countries with emerging markets. The WEDT system provides these markets the invaluable opportunity to develop housing, medical, educational,transportation and commercial projects as well as infrastructure using cost-saving, state-of-the art technology and construction systems while creating local jobs and increasing national productivity. These countries can become a showplace for modern, environmentally friendly (“Green”) development that:

Improves the quality of life of locals and touristsReduces waste and preserves the air and environmentDevelops communities with modern amenitiesCreates jobs and productivityIncreases tourism appeal &

trafficGenerates investment opportunitiesUpgrades Infrastructure & Public Transportation