DESIGN AND DEVELOPMENT OF LOW COST ARM CORTEX-M BASED EVALUATION BOARD

DESIGN AND DEVELOPMENT OF LOW COST ARM CORTEX-M BASED

EVALUATION BOARD

Submitted By,LAVANYA H M(1KI10EC091)

Head of the Department,Dr. RAJASHEKARARADYA

Professor & HOD, Dept. of ECEK.I.T Tiptur.

Under the guidance of,NIRANJANA SWAMY G SAsst. professor, Dept. of ECE

K.I.T Tiptur

KALPATARU INSTITUTE OF TECHNOLOGY, Tiptur.DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

INTRODUCTION Development board is a printed circuit board with

circuitry and hardware to facilitate experimentation with certain microcontroller.

Every engineer, developer or hobbyist must have development board to implement their ideas.

LPC1768 evaluation board is based on ARM Cotex-M3 processor from NXP.

LPC1768 Development board should be low cost, less power consumption, and high processing speed.

BLOCK DIAGRAM

In-System Programming and In-Application Programming. 8 Channel DMA controller. Ethernet MAC. 4 UARTs. 2 CAN channels. 3 SSP/SPI. 3 I2C I2S. 8 Channel 12-bit ADC. 10 bit DAC. Motor controll PWM. Quadrature encoder interface. 4 General purpose timer. Watchdog timer.

FEATURES

SOFTWARE AND HARDWARE

Keil MDK-ARM software for Application development

Altium for PCB Designing, PCB board and all the semiconductor components including LPC1768 micro-controller.

THANK YOU