Delta Light - Trimless Suspension
Post on 22-Jul-2016
230 Views
Preview:
DESCRIPTION
Transcript
1O.F.A.
Trimless Suspension Solutions / O.F.A.
2
100150
75Ø25
100150
75
40
Ø25
TrimlessSUSPENSION
Trimless+ CONNECTION
SUSPENSION
3O.F.A.
100150
75Ø25
TrimlessCONNECTION
TrimlessThe Trimless Suspension
solutions enable a discrete installation of suspension cables
and power supplies, either separate or a combination
of both. Either for profiles or pendant lamps, with single or multiple current supplies and
suspension points, Delta Light’s new trimless suspension kit
offers a minimal appearance and clean ceiling appearance.
4
1 2 3
5O.F.A.
4 5
1 Suspension Trimless O.F.A.2 Suspension + Connection Trimless O.F.A.
3 Connection Trimless O.F.A.4 Jackpoint Trimless
5 Spotnic M10 Trimless
O.F.A. / One For AllAll trimless suspension options
can be applied to both void and concrete (solid) ceilings.
Standard Suspension
Jac / M10Trimless
TrimlessSuspension
6
7O.F.A.
The Trimless kit can also be applied to M10 and Jackpoint connections, focusing on the design
luminaire and clean ceiling appearance.
Standard Installation
Jac / M10Trimless
TrimlessInstallation
Standard Suspension
8
9O.F.A.
TrimlessSuspension
The Delta Light® collection features an extensive range of suspended made-to-measure profiles and pendant luminaires. The Trimless Suspenion kits can be used for nearly all of these profiles and luminaires.
10
11O.F.A.
12
A
80mm9mm
drywall
80mm
12mmdrywall
80mm
Ø62
DIN911/1,5
2x
PUSH!to adjust height
A
80mm9mm
drywall
80mm
12mmdrywall
80mm
Ø62
DIN911/1,5
2x
PUSH!to adjust height
1
7 8 9 10
2 3 4
A
80mm9mm
drywall
80mm
12mmdrywall
80mm
Ø62
DIN911/1,5
2x
PUSH!to adjust heightA
80mm9mm
drywall
80mm
12mmdrywall
80mm
Ø62
DIN911/1,5
2x
PUSH!to adjust height
13O.F.A.
How to install
FillerA good result after installing a
Trimless kit is achieved by finishing the gap between the kit and ceiling
with a two-component filler.A normal filler hardens because the water or turpentine evaporates out of it. The result is a final layer which is flatter than the layer that was put
originally. A two-component filler hardens by a chemical reaction
between 2 different components and remains at the same level as
applied. A two-component filler is composed of an asbestos free polyester resin that, when mixed with a hardener turns into a filler
which then sets and hardens. They typically remain elastic, are
easy to sand and they have a high filling capacity.
11 12
5 6 You can find installation videos on the Delta Light Vimeo channel.
Trimless Mounting Kit Concretehttp://vimeo.com/90236287
Trimless Suspension Gyprochttp://vimeo.com/90203706
A
80mm9mm
drywall
80mm
12mmdrywall
80mm
Ø62
DIN911/1,5
2x
PUSH!to adjust height
A
80mm9mm
drywall
80mm
12mmdrywall
80mm
Ø62
DIN911/1,5
2x
PUSH!to adjust height
14
Trimless Suspensionoffers a minimal and clean
ceiling appearance.
15O.F.A.
16
deltalight.com
top related