CT-3000 Demo for PBDiM Minsk Mazowiecki, 29 Apr 2011

Curb-Tec Europe Sp.j.Demonstration for PBDiM Minsk Mazowiecki

The CT-3000 small extrusion curb machine was used to show PBDiM Minsk Mazowiecki and Egis. It was to determine if it is worth changing the project design, which is already done using the traditional block method, to be able to utilize the “pour-in-place” extrusion method to pour some of the curbs on this project. They felt it was worth utilizing the CT-3000 based on the demo and initial prices given to them and discussions are underway for approximately 7 km of curb.

Location: Minsk Mazowiecki, PolandLength: 16 metersMachine Time: 10 minutes

Finishing Time: 30 minutes (without cutting control joints)

For more information, please contact us at: info@curb-tec.pl or +48 22 266 0628

CCurb-Tec Europe is a distributor of CURB-TEC extrusion curb machines. Curb-Tec Inc.’s CT-3000 is widely considered the best in its class.

CCurb-Tec, Inc. was established in 1999 in Florida, USA, and since then has served happy and satisfied customers in 18 countries from six continents. CURB-TEC manufactured products are the result of high-level engineering knowledge gained from experience doing work for the world’s premier hydraulic engineering company, Rexroth, and the U.S. Defense Department. This engineering experience is combined with four decades of jobsite experience in curbing.

CCURB-TEC machines are designed to solve the most common problems, minimize downtime and deliver the best final product.

1

Adjusting the side plate on the mold in order to control the boil out so as to not waste concrete and setting the chalk line.

2

The CT-3000 is starting the pour off very well.

3

The better the concrete mixture is, the less finishing necessary.

The work is there… the funding isn’t always though.

Utilizing a CT-3000 is 5X – 10X faster than using prefabricated blocks and reduces jobsite injuries.

Bids are too high to win those contracts? If you are looking for solutions to cut costs… not by taking shortcuts… but by doing your curbing and road-building in a much more efficient way so you can win the contracts… and

better still ensure you stay under budget… contact us and arrange a demo… WE WILL CURB YOUR COSTS!!! For more information, please contact us at: info@curb-tec.pl or +48 22 266 0628