Transcript

Mike Tapealava

The Cross Pin System

Official consultants for Bredent Products.

Impulsedent Australia50 Natale RoadBuccan QLD 4207

(07) 3200 303 638

Info.impulse@bigpond.com

The confirmation gig ready for clinic dispatch.

Used impression copings

Pattern Resin from GC

Confirming the milling model

This model will be sectioned for milling

The solid model

Chee.W and Jivraj S. Designing abutments for cement retained implant supported restorationsBritish Dental Journal 2006;201(9)

Chee.W and Jivraj S. Designing abutments for cement retained implant supported restorations British Dental Journal 2006;201(9)

Chee.W and Jivraj S. Designing abutments for cement retained implant supported restorations British Dental Journal 2006;201(9)

Diagnostic wax up

The silicone matrix

The survey

O degree taper for single units

2 degree taper for bridges

Gervais MJ, Hatzipanagiotis P, Wilson PR. Cross pinning: The philosophy of retrievabilityApplied to fixed, implant- supported prostheses. Australian Dental Journal 2008; 53

The abutment casted with the 0 degree taper.

Confirming the path of insertion.

Single cut tungsten

Cross cut tungsten

The telescopic walls are manually polished.

Diatit-Multidrill with stop.

Facing cutter to shape the

Inside surface of the coping.

4L2.5 Necks 4L1.5 Incisal

Managing retrievable qualities with multi unit implant systems.

Gervais MJ, Hatzipanagiotis P, Wilson PR. Cross pinning: The philosophy of retrievabilityApplied to fixed, implant- supported prostheses. Australian Dental Journal 2008; 53

Chee.W and Jivraj S. Designing abutments for cement retained implant supported restorationsBritish Dental Journal 2006;201(9)

Provisional's constructed by Reza Shahmiri

Official consultants for Bredent Products.

Impulsedent Australia50 Natale RoadBuccan QLD 4207

(07) 3200 303 638

Info.impulse@bigpond.com

Official consultants for Bredent Products.

Impulsedent Australia50 Natale RoadBuccan QLD 4207

(07) 3200 303 638

Info.impulse@bigpond.com

top related