Transcript
Lightweight 1250 kgs
Fits standard door openings
Tough rubber crawler base
CRAWLER DRILL AMK TEC12.2
Lightweight sampling drill
www.tecopsa.com
New design TEC series Perform sample and rotary/auger drilling with the same rig.
Can be transported on standard vans. Rubber tracks, hydraulic jacks for proper levelling at site. Simple hydraulic device to shift between SPT-rotary head and mast rod extractor. 15 tonne. Casing extractor included.
EN Optionals: Water pump 40lts/min@40 bar.
CE Safety cage.
www.tecopsa.com
EN Aplications: Standard penetration test –SPT.
Soil sampling with percussive core barrels. Rotary drilling, auger drilling.
Lightweight sampling drill
Technical details
Engine
HATZ 1D90
Power 10.5 kw (15HP).
Cylinders Nº 1
Emissions Tier 3 / stage3A
Speed 2800
Electrical system 12 Volt.
Hydraulic system
Main pump 24 + 24 lts/min
Secondary pump 12.5 lts/min.
Operating pressure 190 bar
Tank capacity 60 lts.
Drill Mast
Pull up system Direct push or reductor and hydraulic motor
Pull up/down 2400 - 1500 Kgs // 1250 kgs-1250 kgs
Stroke 1650mm
Carwlers
Width 800mm.
Length 1250mm
Shoes Rubber / Goma
Climbing ability 20%
www.tecopsa.com
Lightweight sampling drill
Rotary head 2 speed + PTO
A/PTO B/PTO C/PTO
Torque (Nm) 400/800 510/1000 700/1400
Speed Rpm 150/280/80/120 120/200/60/100 90/160/45/90
Swivel 1”
Rotary trolley Hand open-Flex shift system
Hydraulic clamp
Open type 45-160 mm
Drilling dimensions
www.tecopsa.com
Lightweight sampling drill
2. Total working height with direct push cylinder .3. Total working height with reductor pull up version.
Marton Geotechnical Services Ltd +44 (0) 1359 271167
www.mgs.co.uk e info@mgs.co.uk t +44(0)1359 271167Specifications may change without prior notice
05/2019 V1.0
top related