Configuration Setup Guide - Broadband, ADSL2, ADSL 2 ... · TP-Link W8920G 108M ADSL & ADSL2+ Configuration Setup Guide Wireless Setup 1. The customer may wish to name their wireless
Post on 22-Mar-2019
240 Views
Preview:
Transcript
ClubTelco Setup Support TP-Link W8920G 108M ADSL & ADSL2+
Configuration Setup Guide
Configuration Setup Guide
Connect your TP-Link W8920G 108M as per the instructions in your quick installation guide.
• Connect the power adapter and turn on your TP-Link W8920G 108M Modem/Router.
• Connect your ADSL Enabled phone line.
Follow these simple steps to configure your TP-Link W8920G 108M Modem/Router to connect to the ClubTelco ADSL and ADSL2+ service. 1. Open your internet explorer. 2. In the address line type http://192.168.1.1 and hit enter.
3. Log into the TP-Link W8920G 108M modem with username “admin” and password
“admin”
ClubTelco Setup Support TP-Link W8920G 108M ADSL & ADSL2+
Configuration Setup Guide
Quick Setup You will then be presented with the main information screen. 1. Select “Quick setup” from the side menu.
2. Then Ensure the VPI is “8” (default is 0 so make sure it is changed to 8).
3. Ensure the VCI is “35”.
4. Select “Next”.
ClubTelco Setup Support TP-Link W8920G 108M ADSL & ADSL2+
Configuration Setup Guide
Connection Type 1. Select “PPP over Ethernet (PPPoE)” radio button with Encapsulation “LLC/Snap-
Bridging” (once again if after rebooting the device does not authenticate change this to “PPPoA” and change the Encapsulation to “VC-MUX” and reboot the router again).
2. Click “Next”.
ClubTelco Setup Support TP-Link W8920G 108M ADSL & ADSL2+
Con�guration Setup Guide
PPP Username and Password
1. Enter the username in the “PPP Username Field”
2. Enter the password in the “PPP Password Field”
3. PPPoE service name can remain “Blank”
4. Authentication method is set to “Auto”
5. MTU must be changed to “1460” (Default is 1492 so ensure you change this to the correct setting)
6. Click “Next”
username@clubtelco.com
ClubTelco Setup Support TP-Link W8920G 108M ADSL & ADSL2+
Configuration Setup Guide
Enable IGMP Multicast and WAN Service 1. These settings remain default
2. Select “Next”
ClubTelco Setup Support TP-Link W8920G 108M ADSL & ADSL2+
Configuration Setup Guide
Device Setup 1. All settings remain default on this page
2. Select “Next”
top related