COMMISSIONER DEPT. OF EMPLOYMENT AND …€¦ · Cum 456.360 245.00 111808.20 ... corbels etc., including edges including cost of all materials, labour ... members wherever necessary
Post on 04-Apr-2018
213 Views
Preview:
Transcript
Tender Document Issued To:
Name of the Tenderer : ______________________________________________________
Address : ______________________________________________________
______________________________________________________
______________________________________________________
Signature of the Official Issuing the Tender Document with Desingation and Date
COMMISSIONER
DEPT. OF EMPLOYMENT AND TRAINING
BENGALURU
Bangalore - 560 001
Construction of Govt. ITIs at Turuvekere and Koratagere in Tumkur
District in Karnataka for Dept. of Employment and Training -
Package - IV
Open Tender Notice No. RITES/BLR/OT/11/2015 dated 24.04.2015
FINANCIAL BID
RITES Ltd.,
E.Mail : bangalorepo@rites.com
(A Govt. of India Enterprise)
Site Office
3 A, Bharat Apartments, 44/1,
Fairfield Layout, Race Course Road
TENDER
Phone: 080 - 22257118 / 22280268
Fax: 080 - 22266557
Schedule WORKS COST (`̀̀̀)
I Construction of Govt. ITI at Turuvekere in Tumkur
District
II Construction of Govt. ITI at Koratagere in Tumkur
District
TOTAL PROJECT COST
TOTAL IN WORDS
Construction of Govt. ITIs at Turuvekere and Koratagere in Tumkur District in Karnataka
for Dept. of Employment and Training - Package - IV
SUMMARY OF COST
RITES Ltd.,
For and on behalf of DET 1 Signature of the Bidder
SN DESCRIPTION AMOUNT
Civil Works
1 Part A - KPWD SR Items `
2 Part B - CPWD SR Items `
3 Part C - Market rate Items `
4 Part D - Panchayat Raj SR Items `
Electrical Works
1 Part A - KPWD SR Items `
2 Part B - Market rate Items `
TOTAL - Schedule II `
TOTAL
(in Words) - Rupees
Construction of Govt. ITI at Turuvekere in Tumkur District
ABSTRACT - Schedule II
RITES Ltd.,
For and on behalf of DET 2 Signature of the Bidder
Description Unit Qty
P. No l No
Part- A - KPWD SR Items
1 5 2.1 KSRB 2-1.1 Earth Work in Surface excavation in ordinary soil
for levelling and lowering the ground manually (other than
foundation of buildings, culverts, road drain and trenches of
pipe lines and cables) and removing the excavated stuff to a
distance not exceeding 50m and lift upto 1.5m excavated
surface levelled and neatly dressed, disposed earth to be
levelled after breaking the clods and neatly dressed as per
specifications. No KBS 2.1 (b)/2.3.1
Cum 300.000 136.00 40800.00
2 5 2.3 KSRB 2-2.1 Earth work excavation for foundation of buildings
either in pits or trenches 1.5m and above in width in Ordinary
soil not exceeding 1.5m in depth, including dressing the
bottom and sides of pits or trenches, stacking the excavated
soil clear from edges of excavation with lead upto 50 m after
breaking of clods complete as per specifications.
Cum 456.360 163.00 74386.68
3 5 2.4 KSRB 2-2.2 : Earth work excavation for foundation of
buildings, water supply, sanitary lines and electrical conduits
either in pits or in trenches 1.5m and above in width in Hard
soil not exceeding 1.5m in depth, including dressing the
bottom and sides of pits and trenches, stacking the excavated
soil clear from edges of excavation with lead upto 50 m after
breaking of clods complete as per specifications. Specification
No. KBS 2.1 (b)/2.3.5Cum 456.360 245.00 111808.20
4 6 2.10 KSRB 2.3 : Filling available excavated earth ( excluding rock )
in sides of foundations upto plinth in layers not exceeding 20
cms. in depth, compacting each deposited layer by ramming
after watering with lead upto 50 m. and lift upto 1.5 m.
including cost of all labour complete as per specifications.
specification. No. KBS 2.9Cum 912.720 110.00 100399.20
4 9 3.2 KSRB -3.2: Providing and injecting chemical emulsion for Pre-
constructional Anti-Termite Treatment, creating continuous
chemical barrier under and around the column pits,walls
,trenches,basement excavation,top surface of the plinth filling,
junction of wall and floor, along the external perimeter of
building, expansion joints, over the top surface of
consolidated earth on which apron is to be laid, surrounding of
pipes and conduits, with chloropyriphos emulsifiable
concentrates of 20%concentration, including cost of chemical,
diluting in water to one percent concentration, labour, HOM of
equipments, complete as per specifications.(Plinth area of the
building at ground floor only shall be measured ) Specification
No. KBS 3.2.6 / 3.2.7
Sqm 1000.000 100.00 100000.00
5 12 4.3 KSRB 4-1.3: Providing and laying in position plain cement
concrete of mix M7.5 with OPC cement @ 180kgs, with
40mm and down size graded granite metal coarse aggregates
@ 0.85cum and fine aggregates @ 0.57cum machine mixed,
concrete laid in layers not exceeding 15cms, thick, well
compacted, in foundation and plinth including cost of all
materials, labour, HOM of machinery, curing complete as per
specifications. specification No KBS 4.1,4.2
Cum 146.110 4488.00 655741.68
Construction of Govt. ITI at Turuvekere in Tumkur District
SN Bengaluru SR -
2014-15
Rate Amount
RITES Ltd.,
For and on behalf of DET 3 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
6 13 4.7 KSRB 4-1.7: Providing and laying in position plain cement
concrete of M 10 with OPC cement @220 kgs with 20mm and
down size graded granite metal coarse aggregates @ 0.84
cum and fine aggregates @ 0.56 cum, machine mixed,
concrete laid in layers not exceeding 15 cms, thick, well
compacted, in foundation and plinth and cills, inclduing cost of
all materials, labour, HOM of machinery, curing complete as
per specifications. Specification No KBS 4.1,4.2
Ground Floor Cum 10.680 4896.00 52289.28
First Floor Cum 10.990 4946.00 54356.54
7 13 4.12 KSRB 4-2.7: Providing and laying in position reinforced
cement concrete of design mix M 25 with OPC cement @
340 kgs with 20mm and down size graded granite metal
coarse aggregates @ 0.70 cum and fine aggregates @ 0.47
cum, with superplastisiser at 3.0 lts. conforming to IS103-
1999 reaffirmed -2008, machine mixed, concrete laid in
layers not exceeding 15 cms, thick, vibrated for all works in
foundation plinth and ground floor level for roof slabs,
staircase, lintels, retaining wals, return wall, wall (any
thickness ) including attached plasters, columns, piers,
abutments, pillers, posts, struts, buttresses, string or lacing
courses, parapets, coping, bed blocks, anchour blocks, plain
windows cills, fillets etc., inclduing cost of all materials, labour,
HOM of machinery, curing complete as per specification No
KBS 4.1,4.6
Ground Floor Cum 502.390 5945.00 2986708.55
First Floor Cum 11.500 5995.00 68942.50
8 15 4.28 KSRB 4-6.1 : Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for
foundations, footings, bases of columns for mass concrete
including cost of all materials, labour complete as per
specifications. Specification No. KBS 4.6.2
Sqm 290.560 219.00 63632.64
9 15 4.29.2 KSRB 4-6.2: Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for flat
surface such as suspended floors, roofs, landings, balconies
and likes, thickness up to 200mm including cost of all
materials, labour complete as per specifications. for 0 to 5m
Height , Specification No. KBS 4.6.2
Sqm 978.00 530.00 518340.00
10 15 4.29 KSRB 4-6.2: Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for flat
surface such as suspended floors, roofs, landings, balconies
and likes, thickness up to 200mm including cost of all
materials, labour complete as per specifications. Specification
No. KBS 4.6.2
4.29.5 do- 0 to 8 mts Sqm 44.16 1000.00 44160.00
11 15 4.32 KSRB 4-6.5: Providing and removing centering, shuttering,
strutting, propping etc., for columns, pillars, piers, abutments,
post and struts, square /rectangular / polygon in plan including
cost of all materials, labour complete as per specification.
Specification No. KBS 4.6.2
Ground Floor Sqm 222.46 338.00 75191.48
First Floor Sqm 505.60 378.00 191116.80
Second floor Sqm 92.42 343.00 31700.06
RITES Ltd.,
For and on behalf of DET 4 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
12 16 4.34 KSRB 4-6.7: Providing and removing centering, shuttering,
strutting, propping etc., an removal of form work for sides and
soffits of beams, beam haunchings, cantilever girders,
bressumers and lintels not exceeding 1m in depth including
cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2 Sqm 1009.310 261.00 263429.91
13 17 4.37 KSRB 4-6.10: Providing and removing centering, shuttering,
strutting, propping etc., for chajjas, corbels etc., including
edges including cost of all materials, labour complete as per
specification. Specification No.KBS 4.6.2
Sqm 5.40 250.00 1350.00
14 17 4.38 KSRB 4-6.11: Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for
stairs(excluding landing) except spiral staircase including cost
of all materials, labour complete as per specification.
Specification No. KBS 4.6.2Sqm 22.580 454.00 10251.32
15 17 4.46 KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C
work including straightening, cutting, bending, hooking,
placing in position, lapping and / or welding wherever
required, tying with binding wire and anchoring to the adjoining
members wherever necessary complete as per design (laps,
hooks and wastage shall not be measured and paid) cost of
materials, labour, HOM of machinery complete as per
specifications. Specification No. KBS 4.6.3
4.46.2 For TMT bars Fe 500 Tonne 46.250 72548.00 3355345.00
16 23 5.3 KSRB-5.1-3 : Providing and cosntructing Granite/ trap/ basalt
rubble stone masornry in foundation cement mortar 1:6,
(Uncoursed) bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per
specifications. KBS 5.1.12 Cum 99.060 2831.00 280438.86
17 23 5.6 KSRB-5.2.3: Providing and constructing Granite/ trap/ basalt
size stone masornry in foundation cement mortar 1:6, stone
hammerd dressed in courses not less than 20 cms high, bond
stones at two m.apart in each course including cost of
materials, labour, curing complete as per specifications. KBS
5.1.13Cum 45.720 3552.00 162397.44
18 27 6.3 KSRB 6-1.2 : Providing and constructing burnt brick masonry
for basement and superstructure with approved quality of non-
modular bricks of standard size of class designation 35 with
cement mortar1:6 including cost of materials, labour charges,
scaffolding, curing complete as per specifications.
Specification No. KBS 6.2
Ground Floor Cum 242.330 5247.00 1271505.51
First Floor Cum 51.540 5297.00 273007.38
19 28 6.25 KSRB 6-7.4 : Construction of partition wall 11.2 cm thick with
non modular table moulded burnt brick of class designation 35
with cement mortar 1:4 including cost of materials labour
charges, scaffolding, curing complete as per specification
KBS 6.2Sqm 78.180 698.00 54569.64
RITES Ltd.,
For and on behalf of DET 5 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
20 31 7.1 KSRB 7.1: Providing and fixing in position collapsible steel
shutters with single or double leaf with vertical channel
20x10x2mm braced with flat iron diagonals 20x5mm size with
top and bottom rails of 'T' iron sections of 40x40x6mm with
38mm dia steel pulleys complete with bolt and nuts locking
arrangements, stoppers, handles on both sides with 7.5cms
openings at 10cms c to c applying a priming coat of red lead
paint . Cost of mateials, labour, HOM of machinery complete
as per specifications. Size of Gate 2.4m x 1.4m. Specification
No.KBS 7.7/7.12. Sqm 7.200 4322.00 31118.40
21 31 7.5 KSRB 7.5 : Providing and fixing pull and push type rolling
shutters of approved make out of 18 guage, 75mm wide cold
rolled steel laths of convex corrugation, with side guides and
bottom rail, with interlocking arrangements for steel laths by
means of alternate clips, suspension shaft with High tension
coil type springs two numbers, mounted on specially designed
pipe shaft, with bracket plates, guide channels, ball bearing
arrangements, for inside & outside locking with push & pull
operations complete including pulling hooks, 4Nos. handles
with all fittings and accessories, painted with a coat of red
lead paint (without top cover) cost of materials, labour, HOM
of machinery complete as per specifications. Shutter size
3mx2.8 m Specification No. KBS 7.10 / 7.12
Sqm 43.200 2661.00 114955.20
22 32 7.6 KSRB-7.6:Providing and fixing top covers made out of 20
guage M.S. sheet over pull and push rolling shutters bent to
shape including cost of red lead primer coat of painting,
materials, labour, HOM of machinery complete as per
specifications. Specification No. KBS 7.10.6/7.12m 18.000 609.00 10962.00
23 36 7.17 KSRB 7.17 : Providing, fabricating, assembling and fixing in
position aluminium doors using following aluminium mat finish
or glossy finish, outer frame plain section 101.6x44.45mm
thickness 3.18mm, section weight 2.404 kg/m, door shutters
vertical section 44.62x44.45mm thickness 3.18mm, section
weight 1.505kg/m, top section 47.62x44.45mm thickness
3.00mm, section weight 1.426kg/m bottom section
114.3x44.45 thickness 3.18mm, section weight 2.646kg/m,
door central section 49.91x44.45mm thickness 3.00mm,
section weight 1.495 kg/m glazing clips 19x17.3x11mm
thickness 0.9mm section weight 0.124kg/m; aluminium
sections cut to length joint metred cornersgrinded, the
shutters pivoted opening arrangement with heavy duty
aluminium alloy automatic door closures floor mounted,
providing and fixing standard approved accessories, such as
aluminium handle for full width or length, tower bolts, lock,
pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for
top and bottom panel; aluminium sections treated for removal
of any rust and prevention of further rust formation,
and coated with greasy materials for non-adherance of
mortars or any other sticky materials; the assembled frame
fitted with the corner angles, strips and fitted with screws, rawl
plugs or teakwood gutties to R.C.C. columns or masonry on
sides. beams and flooring in bottom. including cutting,
chistling and making good with cement mortar to match the
surface; all the frames throughly cleaned free from rust, scale,
or dirt including cost of materials, fixtures, labour and HOM of
machinery complete as per specifications.
RITES Ltd.,
For and on behalf of DET 6 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
37 7.17.2 using aluminium section powdered coated to a minimum of 60-
70 microns with exterior durable pure polyester grade powder
of approved quality. Sqm 7.200 6086.00 43819.20
24 39 7.24 "Providing and fixing cold rolled prepainted steel windows of
IS standards, made out of 0.6mm thick deep drawing quality
galvanised on both sides 120gms/sq.mtr. Primer coat upto 5
microns with thermosetting epoxy resin and finish painted with
a polyester based paint 20 microns thick. The size of profiles
is approximately 46 x 52mm for external frames, 46x46mm
section for shutters, 46x70mm section for centre
mullion/transom and 18x31mm section is for fixing glasses.
The section should be cut to length joint mitred and
assembling by means of corner brackets made out of cold
rolled cold annealed strips of 1.2mm thick duly galvanised and
fixed with nickle plated self taping screws.The shutters are
provided with approved quality of fixtures like handles made
out of zamac alloy die cast and powder coated, receiver made
out of glass filled nylone and hinges made out of
CRCA powder coated. 4mm thick glass should be fixed with
EPDM gaskets. Guard bars fabricated out of 10mm square
bright bars shall be fixed horizontally at 125mm C/C by
rivetting to the external frame. The above frames are fixed to
the concrete / masonry walls by means of self expanding
screws with 4mm float glass with gaurd bars
39 7.24.1© 4mm float glass with gaurd bars Sqm 68.040 4000.00 272160.00
25 42 7.35 Providing and fixing M.S hand railing for Balcony/staircase
etc., with 50mm dia M.S hollow pipe of 14 gauge, welded to
20mmX20mm M.S. square rod placed vertically, spaced at
100mm at regular inetrvals of 600mm. These veryical rods
laterally tied to 3 horizontal rods spaced at equal interval.
These assembly is fixed to concrete by using expansion bolts
and welding the same to reinforcement bars and making good
the surface. ALl the joints and sections should be cut to
length, welded and grinded wherever necessary etc.,
complete. The work includes cost of all materials, labour
charges for all items of work, hire charges for welding, cutting
and grinding equipment, and electricity charges etc., complete
as per specification and drawing
Sqm 10.000 2614.00 26140.00
26 46 8.6 KSRB 8.3-2: Providing and laying to required line and slope
roofing with semi-corrugated (Trafford) asbestos cement
sheet 6mm thick fixed with galvanised iron J or L hooks, bolts
and nuts 8mm dia C.I plain and bitumen washers, over the
existing purlins, rafters and trusses including cost of materials,
labour, complete as per specifications
Sqm 22.000 381.00 8382.00
RITES Ltd.,
For and on behalf of DET 7 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
27 59 9.93 Providing and fixing factory made single leaft rigid GRP
Sandwich composite door shutter of 32mm thick, laminated
with two GRP skins with wood grain finish, fabricated using
U.V-stabilized Isopathic Gelcoat and on layer of 45 gsm E-
class Chopped strand Mat (CSM), impregnated with
orthopthalic polyster resin. The thickness of the skins shall not
be less than 1.5mm. Expanded Polystyrene (EPS) structural
foam panel of 29mm thickness and a density of 20Kg/m3 shall
be used as core mterial. Wooden reinforcements made of
seasoned Salwood block of cross section not less than
28mmX32mm and also necessary salwood reinforcements for
fixing the metal fittings such as tower bolts, aldrops, handles
etc shall be provided. A structural adhesive compatible with
EPS foam shall be used for bonding the core material, the
salwood reinforcement and the skins.
The material and process for manufacturing the door shutters
shall confirm to RV/TIFAC composites Design Centre
standards and specifications and the door shutters tested in
confirmation to IS 4020-1994. The finish of shutter will be
plain colour White/Ivory/Beige/Light Grey or any other colour
using high quality pigments. Excluding cost of fixtures and
inclusive of supply of shutters to respective work spot.
Sqm 11.340 3200.00 36288.00
28 60 9.96 Providing and fixing 65mm X 125mm GRP Door frame
fabricated using E-Glass Chopped Strand Mat (CSM) U.V -
sablized Isopathlic Gelcoat and Isopthalic resin. The thickness
of the GRP Skin shall not be less than 2.0mm. The door
frame consists of four segments, which are provided with plug-
in-socket arrangement in-situ in the mould. The segments are
plugged in and are joined together by means of screws. The
GRP frame shall be provided with wooden reinforcement on 6
locations for high screw holding capacity for fixing metalling
hold fast and shall be consolidated by filling with medium
density foam/plaster of paris with fibre reinforcement. Six
numbers of 260mmX25mmX5mm size S shaped M.S. flat
hold fast shall be provided with the frame.
m 30.600 565.00 17289.00
29 67 11.1 KSRB 12-1.1 : Providing and laying in position to required
level or slope 100mm internal diameter salt glazed stoneware
pipes grade A and jointing with stiff mixture of cement mortar
in proportion of 1:1, testing of pipes and joints, including cost
of materials, labour charges complete as per specifications.
Specification No. KBS 12.2.5/12.7m 50.000 219.00 10950.00
30 67 11.2 KSRB 12-1.2: Providing and laying in position to required level
or slope 150mm internal diameter salt glazed stoneware pipes
grade A and jointing with stiff mixture of cement mortar in
proportion of 1:1, testing of pipes and joints, including cost of
materials, labour charges complete as per specifications.
Specification No. KBS 12.2.5/12.7m 50.000 340.00 17000.00
RITES Ltd.,
For and on behalf of DET 8 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
31 68 11.37 KSRB 12-5.1: Construction brick masonry circular type man
hole 0.91m internal diameter at bottom 0.91m and 0.56mt dia
at top with table moulded non modular bricks of class
designation 50 in cement mortar 1:4, inside cement plastered
12mm thick with cement motar 1:3, finished with floating coat
of neat cement , foundation concrete of 1:3:6 mix using 40mm
and down size granite metal and making neccessary channel
in cement concrete 1:2:4 with 20mm and down size granite
metal finished with floating coat of of neat cement wit SFRC
cover and frame (heavy duty, HD-20 grade desination)
560mm internal diameter confirming to IS 12592, total weight
cover and frame to be not less than 182 Kg fixed in cement
concrete 1:2:4 20mm and down size broken granite metal
providing and removing centering shuttering including cost of
material , labour charges HOM of machineries complete as
per specification NO KBS12.4
Nos 1.000 12202.00 12202.00
32 70 11.50 KSRB 12-8.1 : Constructing brick masonry inspection
chamber 455x610mm, and 450mm depth. (clear inside
dimension) for single pipeline, using table moulded non-
modular bricks of class designation 50 in cement mortar 1:5,
C.I cover with frame (light duty) 455x610mm internal
dimensions. total weight of cover with frame to be not less
than 38 kg (weight of cover 23kg and weight of frame 15 kg)
R.C.C. top slab with cement concrete 1:2:4 mix 20mm and
downsize granite metal, foundation concrete 1:5:10 with
40mm and downsize granite metal inside plastering 12mm
thick with cement mortar 1:3, finish smooth with a floating coat
of cement on walls and bed concrete complete as per
standard design including cost of materials, labour charges,
curing complete as per specifications.
Nos 2.000 6227.00 12454.00
33 71 11.52 KSRB 12-8.2: Construction brick masonry inspection chamber
500x700mm and 450mm depth (clear inside dimension) for
pipeline with one or two inlets, using table moulded non
modular bricks of class designation 50 in cement mortar 1:5 ,
CI cover with frame ( light duty) 455x610mm internal
dimension, total weight of cover with frame to be not less
than 38Kg (weight of cover 23kg and weight of frame 15kg)
RCC top slab with cement concrete 1:2:4 mix 20mm and
downsize granite metal, foundation concrete 1:5:10 with
40mm and downsize granite metal inside plastering 12mm
thick with cement mortar 1:3 finished smooth with floating coat
of cement on walls and bed concrete complete as per
standard design including cost of materials, labour charges,
curing complete as per specifications.
Nos 2.000 7060.00 14120.00
34 74 12.2 KSRB 11.1 : Providing and fixing white vitreous chine clay
water closet Orissa pattern of size 580mm X 440mm with
integral type footrests, 100mm S or P tarp, 10 litres low level,
PVC flushing cistren (all are approved make) with fittings, CI
/MS brackets, 32mm dia flush pipe fittings and clamps,
overflow arrangements with special and 25mm mosquito proof
coupling of approved design, painting of fittings and brackets,
cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per
specifications. KBS 11.
pan 6.000 4267.00 25602.00
RITES Ltd.,
For and on behalf of DET 9 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
35 74 12.5 KSRB 11.5 Providing and fixing white vitreous china clay
water closet European type (pedestrial type, P trap) with black
solid plastic sheet and lead cover, CP brass hinges, rubber
buffer 10 litres low level PVC flushing chintrens with fittings CI
/ MS bracket 50 mm dia meter flush bend with fitting and
clapms over flow arrangements with special and 25 mm
mosquitto proof coupling of approved design and painting of
fitting and brackets cutting and making good the wall & floor
required including cost of material etc. complete as per
specification no. 11. Each 2.000 4934.00 9868.00
36 75 12.7 KSRB.11.8.1: Providing and fixing white vitreous china clay
flat back, lipped front urinal basin of size 430X260X350mm
with 5 litres PVC automatic flushing cistern, CI/MS brackets
standard flush pipe and cp brass spreaders with brass union
and GI clamps complete painting of fitting and brackets
cutting and making the good wall and floor wherever required
inlcuding cost material labour complete as per specification
No. KSB 11.Unit 5.000 2813.00 14065.00
37 78 12.26 KSRB 11-11.4 : Providing and fixing white vitreous china clay,
flat back wash basin size 550X400mm with a single 15mm CP
brass pillar tap with CI / MS brackets, 32mm CP brass waste
of standard pattern, painting of fittings and brackets, cutting
and making good the wall and floor wherever required,
including cost of materials, labour complete as per
specifications. No. KBS 11 Unit 5.000 2677.00 13385.00
38 79 12.34 KSRB 11-13.2 : Providing and fixing Laboratory sink of white
glazed fire clay of size 600x450x200mm with M.S / C.I
brackets , C.P brass chain with rubber plug, 32mm C.P brass
waste, tap with union, brass stop cock complete, painting of
fittings and brackets, cutting and making good the wall and
floor wherever required, including cost of materials, labour
complete as per specifications. KBS11Unit 4.000 3222.00 12888.00
39 79 12.39 KSBR 11-15.1: Providing and fixing 600x450mm bevellead
edge mirror of superior glass with 6mm hard board backing
and fixed to wooden cleat with CP Screws, washers, including
cost of materials, labour complete as per specification.
Unit 5.000 1229.00 6145.00
40 80 12.47 KSRB 11-18.1.1 : Providing and fixing sand cast iron soil
waste and vent pipe 100mm dia with spun yard coaked in
cement slurry and cement mortar 1:2 including cost of
materials, labour, testing complete as per specifications, KBS
11-1.10 m 2.000 696.00 1392.00
41 85 12.112.2 Providing stoneware gully trap of approved quality and make
fixing in CC1:2:4 and plastering with CM1:3 wherever
necessary. (Rate includes cost of all materials, fixtures and
lead) 15x10cms Each 10.000 270.00 2700.00
42 85 12.113.1 Providing and fixing C.I. Nahani trap of approved make
confirming to ISI specification and construction of cistern in M-
15 as per direction (Rate is inclusive of cost of materials and
fixtures and conveyance of materials to work spot) 10x7.5cms
Each 10.000 250.00 2500.00
RITES Ltd.,
For and on behalf of DET 10 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
43 87 13.1 KSRB13-1.1 : Providing and fixing to wall, ceiling and floor
galvanised / mild steel tube 15mm dia nominal bore with
fittings (medium grade weight 1.27 kg/mtr) B class including
cost of all materials, labour charges, HOM of equipments and
testing complete as per specifications. Specification No. KBS
13.2.14/13.8
15 mm dia m 75.000 179.00 13425.00
44 87 13.2 20 mm dia m 75.000 218.00 16350.00
45 87 13.5 40 mm dia m 50.000 425.00 21250.00
46 87 13.6 50 mm dia m 200.000 498.00 99600.00
47 88 13.20 KSRB 13-4.1: Making connection GI distribution branch with
GI main of 25 to 40mm nominal bore including cutting and
threading the pipes, providing and fixing Tee, nuts, labour for
all item of works, testing and HOM of equipments complete as
per specifications. Specification No. KBS 13.10
Nos 5.000 332.00 1660.00
48 88 13.23 KSRB13-6.1-1 : Providing and fixing in position brass bib cock
of approved quality 15mm nominal bore including cost of all
materials, labour and HOM of equipments with all leads
complete as per specifications. Specification No. KBS
13.2.2/13.3Each 20.000 218.00 4360.00
49 88 13.26 KSRB 13-6.2-2: Providing and fixing in position brass stop
cock of approved quality 20mm nominal bore inlcuding cost of
all materials labour and HOM equipment with all leads
complete as per specification. KBS 13.2.2 /13.3Each 3.000 160.00 480.00
50 88 13.34 KSRB 13.6.3.3 Providing and fixing in position brass gate
Valve with CI wheels of approved quality (screwed end )
25mm dia 25 mm nominal bore including cost of all materials
labour HOM of equipment with all leads complete as per
specification No. KBS 13.2.6 / 13.3 Each 3.000 590.00 1770.00
51 89 13.36 40 mm dia nominal bore Each 3.000 1270.00 3810.00
52 90 13.70 KSRB 13-8.5: Providing and fixing to wall, ceiling and floor,
low density polyethylene pipes 6.00 kgf/sqcm working
pressure 50mm outside diameter with special flange,
compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour
charges, HOM of equipments and testing complete as per
specifications. Specification No. KBS 13.2.15.1 /13.9
13.70.2 75mm dia m 60.000 297.00 17820.00
13.70.4 110mm dia m 100.000 421.00 42100.00
54 91 13.78 KSRB 13-11.1: Providing and placing on terrace, polyethylene
water storage tanks with man hole lid and suitable locking
arrangements, making holes of suitable diameter for inlet,
outlet and over flow pipes, including cost of all materials,
labour, transport charges, HOM of equipments and testing
complete as per specifications (for 1000 litre capacity).
Specification No. KBS 13.22Nos 2.000 8350.00 16700.00
55 91 13.79 Providing and fixing gun metal wheel valve conforming to IS
specification of approved make as per directions including all
ead and lifts etc., complete
13.79.2 For 20mm dia Each 2.000 365.00 730.00
13.79.3 For 25mm dia Each 2.000 505.00 1010.00
13.79.4 For 32mm dia Each 2.000 740.00 1480.00
13.79.5 For 40mm dia Each 2.000 940.00 1880.00
13.79.6 For 50mm dia Each 2.000 1440.00 2880.00
RITES Ltd.,
For and on behalf of DET 11 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
56 102 14.36 KSRB 14.14-5: Providing Ceramic tiles of size 30x30cms of
approved make, shade and size for flooring, treads of steps
and landings laid on a bed of 12mm thick, cement mortar 1:3
mix flush pointing with white cement using colour pigment,
including cost of materials, labour, curing. complete as per
specifications.
103 14.36.2 ……do……. For ceramic tiles of size 30 x 30 cms Sqm 68.800 943.00 64878.40
57 103 14.41 KSRB 14-17.2: Providing skirting, dado, rises of steps with
colour glazed tiles 6mm thick on lOmm thick cement plaster
1:3 and Jointed with white cement slurry over rough plaster
surface (exculding cost of rough plastered surface which
should be measured and paid separetly) using glazed tiles of
approved make and size including cost of labour ,materials
complete as per specifications. Specification No
KBS14.16,14.17.
103 14.41.1 -do- Colour glazed tiles 15cm x 15cm x 6mm thickSqm 69.360 942.00 65337.12
58 104 14.45 Providing and fixing vitrified glazed tiles of approved make,
quality & colour of size 600X600X10mm thick fixed on bed of
12 thick cement mortar for flooring, skirting and jointed with
neat cement slurry mixed with pigment to match shade of
tiles, including providing spacers at required interval and
removing stains etc., complete as per specification
Sqm 42.120 1044.00 43973.28
59 106 14.61 Providing and fixing 20mm thick gang saw water cut sadarhalli
grey granite in CM 1:4 proportion, cut to required shape,
pattern with paper joints, finished with cement mortar using
white cement and colour pigments to match the colour of slab
making through jointing with sealant, grooves in joints
including cost of curing.
14.61.1 minimum width of 1200 mm Sqm 215.130 1966.00 422945.58
60 110 15.16 KSRB 15-3.8: Providing 18 mm thick cement plaster in single
coat with Cement Mortar 1:4 to brick masonry including
rounding off corners wherever required smooth rendering .
Providing and removing scaffolding including cost of all
materials, labour,curing complete as per specifications .
Sqm 1797.270 198.00 355859.46
61 110 15.19 KSRB 15-3.11 Providing 20 mm thick cement plaster in
single coat with Cement Mortar 1:4 to brick masonry including
rounding off corners wherever required smooth rendering .
Providing and removing scaffolding including cost of all
materials, labour,curing complete as per specifications .
Ground Floor Sqm 755.350 210.00 158623.50
First Floor Sqm 512.900 220.00 112838.00
62 110 15.21 KSRB 15-3-13: Providing 12mm thick cement plaster in single
coat with Cement Mortar 1:3 to Ceiling including rounding off
corners wherever required smooth rendering . Providing and
removing scaffolding including cost of materials, labour,curing
complete as per specifications .Sqm 935.930 173.00 161915.89
63 110 15.30 Providing rough cement plastering 15mm thick in single coat
with cement mortar 1:4, to brick masonry for base of
dadooing works with sand of approved quality, providing and
removing scaffolding, including cost of materials, labour,
curing complete as per specifications Sqm 69.360 158.00 10958.88
RITES Ltd.,
For and on behalf of DET 12 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
64 111 15.33 KSRB 15-7 - Providing lime rendering for plastering to wait
and ceiling including cost of materials, labour, curing complete
as per specifications. Sqm 2733.200 20.00 54664.00
65 111 15.34 KSRB 15.8.1 : Providing and fixing plaster mesh 100 mm wide
manufactured out of hot dipped galvanised iron of nominal
thickness 0.35mm, with a zinc coating of 120 gms per sqm
width, along route of walls chipped for services, junction
between RCC and brick walls including cost of materials
,labour for fixing, complete as per specifications. (length of
mesh only be measured for payment)
m 300.000 29.00 8700.00
66 113 15.51.2 KSRB 15-15.1 : Providing and applying painting in two coats
with plastic emulsion paint of approved brand on wall surface
to give an even approved shade after thoroughly brushing the
surface, free from mortar drops and other foreign matter
including preparing the surface even and sand paper smooth,
cost of all materials , labour, complete as per
specifications.with primerSqm 2733.200 80.00 218656.00
67 114 15.55 KSRB 15-17.1 : Applying priming coat over new wood surface
and / or wood based surface with whilte lead paint priming
including preparing the surface after thoroughly cleaning oil,
grease, dirt and foreign matter, sand papering and knotting
ready mix paint including cost of materials, labour complete
as per specifications.
Ground Floor Sqm 83.600 30.00 2508.00
First Floor Sqm 6.600 33.00 217.80
68 115 15.60.1 KSRB 15-17.6: Providing and applying painting Two coats (
excluding priming coat ) on new wood surface and/or wood
based surface with enamel paint to give an even shade
cleaning the surface of all dirt dust and foreign matter, sand
papering including cost of materials, labour complete as per
specifications.Sqm 90.200 78.00 7035.60
TOTAL - Part A - KPWD SR Items 13494669.98
Total Quoted Cost of Part 'A' - KPWD - SR Items based on Percentage Quoted
Percentage above / below / at par of KPWD-SR 2014-15 (Bengaluru Circle) to be indicated for the above items
Percentage in
figure
(+) / (-) / At par
Percentage in
words
Plus / Minus / At par
Amount in Figure
(Rupees)
Amount in Words
(Rupees)
RITES Ltd.,
For and on behalf of DET 13 Signature of the Bidder
1
SN Description Unit Qty Basic rate Amount in
Rs
PN Item No.
Part B - CPWD SR items
1 85 4.2 Providing and laying cement concrete in retaining walls, return walls,
walls (any thickness) including attached pilasters, columns, piers,
abutments, pillars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,
sunken floor,etc., up to floor five level, excluding the cost of centering,
shuttering and finishing:
4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size) Cum 66.02 6450.00 425829.00
2 88 4.17 Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1
Cement : 3 Coarse sand : 6 graded stone aggregate 20 mm nominal
size) over 75 mm of dry brick ballast 40 mm nominal size well rammed
and consoildated and grouted with fine sand including finishing the top
smooth
Plinth protection Sqm 120.00 419.30 50316.00
3 150 9.21 Providing and fixing ISI marked flush door shutters conforming to IS:
2202 (Part I) non-decorative type, core of block board construction with
frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters :
151 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws. Sqm 41.80 1909.55 79819.19
4 159 9.96 Providing and fixing Aluminium sliding door bolts ISI marked anodised
(anodic coating not less than grade AC 10 as per IS:1868) transparent
or dyed to required colour or shade with nuts and screws etc., complete.
9.96.1 300 mm X 16 mm Each 20.00 229.65 4593.00
5 159 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed
to required colour or shade with necessary screws etc. complete:
9.97.2 250 mm x 10 mm Each 20.00 95.25 1905.00
6 160 9.100 Providing and fixing Aluminium handles ISI marked anodised (anodic
coating not less than grade AC 10 as per IS:1868) transparent or dyed
to required colour or shade with necessary screws etc., complete.
9.100.1 125 mm ( for Doors ) Each 20.00 69.80 1396.00
7 160 9.101 Providing and fixing Aluminium hanging floor door stopper ISI marked
anodised (anodic coating not less than grade AC 10 as per IS:1868)
transparent or dyed to required colour or shade with necessary screws
etc., complete.
9.101.1 Single rubber stopper Each 20.00 37.50 750.00
8 177 10.14 Providing and fixing pressed steel door frames conforming to IS: 4351
manufactured from commercial mild steel sheet of 1.60 mm thickness
including hinges, jamb, lock jamb, bead and if required angle threshold
of mild steel angle of section 50x25mm, or base ties of 1.60 mm
pressed mild steel welded or rigidly fixed together by mechanical
means, including M.S. pressed butt hinges, 2.5mm thick with mortar
guards, lock strike-plate and shock absorbers as specified and applying
a coat of approved steel primer after pre-treatment of the surface as
directed by Engineer-in-charge:
178 10.14.1 Profile B
10.14.1.1 Fixing with adjustable lugs with split end tail to each jambmeter 80.60 377.70 30442.62
Construction of Govt. ITI at Kuduthini in Bellary District
Ref. DSR 2014
RITES Ltd.,
For and on behalf of DET 14 Signature of the Bidder
SN Description Unit Qty Basic rate Amount in
Rs
PN Item No.
Ref. DSR 2014
9 182 11.5 62 mm thick cement concrete flooring with concrete hardener topping,
under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) and top layer
12mm thick cement hardener consisting of mix 1:2 (1 cement hardener
mix : 2 graded stone aggregate, 6mm nominal size) by volume,
hardening compound mixed @ 2 litre per 50 kg of cement or as per
manufacture’s specifications. This includes cost of cement slurry, but
excluding the cost of nosing of steps etc. complete.Sqm 583.44 588.90 343587.82
10 219 13.47 Finishing walls with premium acrylic smooth exterior paint with silicone
additives of required shade:
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/10sqm) Sqm 1268.25 94.95 120420.34
11 346 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry
brick honey comb shaft with bricks and S.W. drain pipe 100 mm
diameter, 1.8 m long complete as per standard design.
19.32.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Nos 2.00 18309.50 36619.00
12 347 19.35 Providing and laying Non pressure NP-3 class (Medium duty) RCC
pipes including collars/spigot jointed with stiff mixture of cement mortar
in the proportion of 1:2( 1 cement : 2 fine sand) including testing of joints
etc complete
19.35.1 450mm dia RCC pipes m 10.00 1920.50 19205.00
13 381 24.11 Supplying, assembling, lowering and fixing in vertical position in bore
well, ERW (Electric Resistance Welded) FE 410 plain slotted (having
slot of size 1.6/3.2mm) mild steel threaded and socketed/plain level
ended pipe (type A) of required dia, conforming to IS:8110 of reputed &
approved make, including painted with outside surface with two coats of
anticorrosive bitumestic paint of approved brand and manufacture,
including required hire & labour charges, fittings & accessories, all
complete, for all depths, as per direction of Engineer-in-charge.
24.11.2 150 mm nominal size dia metre 60.00 1418.65 85119.00
Part B - CPWD SR Items 1200001.97
Add cost index @ 13.33% 125760.21
Part B - CPWD SR Items 1325762.18
Total Quoted Cost of Part 'B' - CPWD SR Items based on Percentage Quoted
Percentage in
wordsPlus / Minus / At par
Amount in
Figure
(Rupees)
Amount in
Words
(Rupees)
Percentage above / below / at par of CPWD-SR-2014 of CPWD to be indicated (including Cost Index) for the above items
Percentage in
figure(+) / (-) / At par
RITES Ltd.,
For and on behalf of DET 15 Signature of the Bidder
SN Description Unit Qty Rate Amount
Part- C Market Rate Items
1 Providing grooves in plastering on walls 2.50 to
4.00 cms wide and to the required depth as per
design and finished in cement mortar (1:3)
including curing etc., complete m 400.00
2 Supply, delivery, installation, testing,
commissioning of vertical centrifugal submersible
pump of 6.5HP capable of pumping 335 lpm
against an approximate total head of 40m from all
causes, including providing 4Cx4sqmm 440V flat
core double sheathed waterproof submersible
cable, Star Delta starter, control panel with dry
run preventer, overload protection and backup
protection and capacitor as required, installed
inside a weather proof kiosk with locking
arrangement of approved design near the
borewell, including making necessary electrical
connections from mains to the starter panel and
from starter panel to the pump. Including
providing and fixing gun metal gate valve and non-
return valve of 50mm n.b on the delivery side of
the pump. Submersible pumps may be of Atlanta/
KSB/ Kirloskar/ CALAMA/ Suguna makes.
No 1
3 Filling New approved Excavated earth/ moorum in
sides of foundation upto plinth in layers not
exceeding 20cm in depth compacting each
deposited layer by ramming after watering with a
lead upto 5km and lift upto 3m including cost of all
labour complete as per the direction of engineer
incharge.
Cum 368.22
Total - Part C - Market Rate Items
The bidder is required to quote his rates in
figure and words for Part C-Market Rate items
Construction of Govt. ITI at Turuvekere in Tumkur District
Total Amount in Words (Rupees)
RITES Ltd.,
For and on behalf of DET 16 Signature of the Bidder
SN Description of the Item Unit Qty Rate Amount
Part D - Panchayat Raj SR 2012-13
1 Geophysical investigation of site for sinking
borewell for supplying drinking water to the
habitation either through hand pump, MWS or
PWSS by vertical electrical sounding by adopting
Venner or Schlumberger's method, including
reconnaissance survey of Geological formation,
geophysical investigation of existing ground water in
the vicinity indicating the location of site,
recommended depth of casing pipe required to seal
the top unconsolidated formation including an extra
depth of 1m in consolidated formation for proper
seating of casing pipe, depth of drilling required to
cover full depth of aquifer proposed to be tapped,
probable yield and other information required
including transportation of instrument and
accessories to work site, engaging technical
personnel and labour required etc.,
Each BW 1.00 1882.00 1882.00
2 Sinking Bore Well of 165mm dia clear using super
fast hydraulic rig of capacity 250 PSIG & above 900
CMF & above in all strata including over burden
upto 20mtrs fixing of casing pipes, collars and cap
with necessary cutting, threading and welding
including transportation of rig and supporting
vehicle, crew charges and cost of consumables
etc., complete including yield testing at the final
depth with a minimum working of compressor for
one hour (excluding cost of casing pipes, collars,
cap etc.)
0- 50 mtrs RMtr 50.00 306.00 15300.00
50- 100 mtrs RMtr 50.00 400.00 20000.00
100- 150 mtrs RMtr 50.00 445.00 22250.00
3 Yield testing of Borewell at Final depth with a
minimum of 10 hours continuously with the help of
pump testing unit including the cost of
transportation charges, crew charges and cost of
consumables Each BW 1.00 8056.00 8056.00
Part D - Panchayat Raj SR Items 67488.00
Total Quoted Cost of Part 'D' - Panchayat Raj SR 2012-13 Items based on Percentage Quoted
Amount in
Figure (Rupees)
Amount in
Words (Rupees)
Percentage above / below / at par of KPWD-Panchayat Raj SR Bengaluru 2012-13 to be indicated (including Cost
Index) for the above items
Percentage in figure (+) / (-) / At par
Percentage in words Plus / Minus / At par
KPWD Panchayat
Raj SR Bengaluru
2012-13 Item No.
9.1
9.1.1
KPWD Panchayat
Raj SR Bengaluru
2012-13 Item No.
9.9
9.1.2
9.1.3
Construction of Govt. ITI at Turuvekere in Tumkur District
IN
KPWD Panchayat
Raj SR Bengaluru
2012-13 Item No.
9.4
RITES Ltd.,
For and on behalf of DET 17 Signature of the Bidder
Part A - KPWD SR 2014 - 15
POINT WIRING
Point wiring using Copper wire without switch.
1 2.3 5 Supplying and wiring adopting loop system in
existing PVC Conduit / casing capping using
1100V grade, COPPER conductor flexible
multistrand FRLS PVC insulated, 2x1.5Sq.mm
Cable confirming to the GTP without switch, the
other end of the wires shall be terminated with
sufficient loose length in a wood/PVC round block
complete for each outlet.
GROUP A
a 2.3.1 5 Short point up to 3 Mtr from tapping point to out let
via switch box Point 10 144.00 1440.00
b 2.3.2 5 Medium point above 3 Mtr up to 6 Mtr from
tapping point to out let via switch box Point 38 215.00 8170.00
c 2.3.3 5 Long point above 6 Mtr up to 10 Mtr from tapping
point to out let via switch box Point 76 334.00 25384.00
d 2.3.4 6 Two outlet in a row, above 3 Mtr up to 6Mtr from
tapping point to out let via switches Point 42 423.00 17766.00
2 3.5 15 Supplying and flush mounting powder coated /
galvanized metal box suitable for mounting
modular switch plates. The box should be firmly
flush mounted after due groove cutting in
Brick/Stone/C.C wall
a 3.5.1 15 1-3 Way Each 44 91.00 4004.00
b 3.5.2 15 4-5 Way Each 120 98.00 11760.00
c 3.5.3 15 6 Way Each 36 121.00 4356.00
d 3.5.4 15 8 Way Each 20 140.00 2800.00
e 3.5.5 16 10-12 Way Each 20 159.00 3180.00
3 3.6 16 Supplying and fixing superior quality modular
switch mounting polycarbonate plate with
necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete
on the existing metal/PVC box.
a 3.6.1 16 1 to 3 Module Each 44 109.00 4796.00
b 3.6.2 16 4 Module Each 120 122.00 14640.00
c 3.6.3 16 6 Module Each 36 173.00 6228.00
d 3.6.4 16 8 Module Each 20 200.00 4000.00
e 3.6.6 16 12 Module Each 20 267.00 5340.00
4 3.7 16 Supplying and fixing of modular switch/
Socket/stepped electronic fan regulator/
dimmer/telephone socket etc on existing modular
switch plate as per IS 3854 and IS 1293
GROUP A
a 3.7.1 16 6 Amps one way. Each 226 63.00 14238.00
b 3.7.3 16 6 Amps 3way socket. Each 70 95.00 6650.00
c 3.7.4 16 Stepped Fan Regulator. Each 48 286.00 13728.00
d 3.7.8 16 6 Amps Bell push Each 2 87.00 174.00
e 3.7.9 16 32 Amps DP switch Each 116 164.00 19024.00
f 3.7.10 16 6/16 Amps universal socket Each 116 147.00 17052.00
g 3.7.11 16 TV / Telephone socket Each 10 82.00 820.00
h 3.7.12 16 RJ 45 / I.O. outlet Each 26 204.00 5304.00
Rate Amount
Construction of Govt. ITI at Turuvekere in Tumkur District - Electrical Works
SN Item No P.No. Description Unit Qty
RITES Ltd.,
For and on behalf of DET 18 Signature of the Bidder
Rate Amount SN Item No P.No. Description Unit Qty
5 1.12 3 Supplying and Fixing Metal Fan Box with Round
Hook.
No 48 92 4416
1.2 2 Concealed Conduit System
6 Supplying heavy gauge PVC conduit pipe
……mm dia .......mm thick confirming to IS 2509
with suitable size bends, metal/PVC junction
boxes adhesive paste etc., and running before
concreting the slab. The conduit should be tied to
the reinforcement rods by using binding wires and
unused ways of junction boxes and pipe ends
should be covered using PVC end enclosures. run
with 18SWG GI fish wire wherever necessary
a 1.2.1 2 19/20 mm dia 2mm thick Mtr 660 43.00 28380.00
b 1.2.2 2 25 mm dia 2mm thick Mtr 3800 57.00 216600.00
c 1.2.3 2 32 mm dia 2.5mm thick Mtr 100 90.00 9000.00
Groove Cutting
7 1.3 2 Supplying heavy gauge PVC Conduit Pipe ----- dia
-- mm thick with suitable size bends, metal
junction boxes adhesive paste etc., by groove
cutting in the wall and fixing by bracing U or J
hooks and cement Plastering up to the wall
surface and run with 18 SWG GI fish wire run
throughout the conduit wherever necessary.
a 1.3.1 2 19/20mm dia 2mm thick Mtr 240 56.00 13440.00
b 1.3.2 2 25mm dia 2mm thick Mtr 640 58.00 37120.00
c 1.3.3 2 32mm dia 2.5mm thick Mtr 100 88.00 8800.00
8 1.8 3 Supplying and fixing of PVC casing and capping
on the wall or ceiling using necessary materials
like bends, screws at an interval of 300mm …. Etc
as required.
a 1.8.2 3 25mm Mtr 160 26.00 4160.00
b 1.8.4 3 38mm Mtr 160 39.00 6240.00
c 1.8.5 3 50mm Mtr 160 43.00 6880.00
9 2.5 6 Wiring for lighting/power circuit using one of
FRLS PVC insulated 1100v grade, multistrand
Copper with low conductor resistance single
core wire in open or concealed system of wiring
with specified IS-694:1990 & confirming to
GTP of GROUP-A
a 2.5.2 6 1.5 sqmm Mtr 3800 18.60 70680.00
b 2.5.3 6 2.5 sqmm Mtr 2800 29.20 81760.00
c 2.5.4 6 4 sqmm Mtr 5800 42.10 244180.00
d 2.5.5 6 6 sqmm Mtr 530 63.80 33814.00
e 2.5.6 6 10 sqmm Mtr 1260 108.00 136080.00
DISTRIBUTION BOARDS
10 6.17 47 Supplying and fixing regular MCB distribution
boards on wall / wood board / flush mounting
using required clamps, bolts, nuts etc., with
provision for fixing suitable type capacity MCB's
single phase / 3 phase / single door with powder
coated painting. Made out of 14 SWG MS
enclosure.
I - Single Door
a 6.17.1 47 4 way SP&N Each 24 706.00 16944.00
RITES Ltd.,
For and on behalf of DET 19 Signature of the Bidder
Rate Amount SN Item No P.No. Description Unit Qty
( Only for Work shops )
II - Double Door
b 6.17.7 47 4 way TP&N Each 3 2399.00 7197.00
c 6.17.6 47 12 way SP & N Each 3 1622.00 4866.00
11 6.15 46 Supplying and fixing regular MCCB distribution
Panel confirming to IS 8828, on wall / wood board
/ flush mounting using required clamps, bolts, nuts
etc., with provision for fixing of suitable type
capacity MCCB's as an incomer for 3 phase
Double door with necessary bus bar completely
wired to use on 440 Volts 3 phase 4 wire powder
coated painting etc., complete with a provision for
fixing of single / three phase suitable capacity
MCCB / MCB's as outgoings confirming to IS
8828.
a 6.15.2 46 8 way Each 6 9095.00 54570.00
12 6.16 47 Supplying and fixing miniature circuit breakers on
existing MCB distribution boards using necessary
fixing materials and 'C' Type curve , indicator
ON/OFF, energy cross-3 with Short circuit
breaking capacity of 10K and complete wiring as
required confirming to IEC 60898.
a 6.16.1 5-32 Amps SP Each 138 418 57684.00
b 6.16.3 5-32 Amps DP Each 3 849 2547.00
c 6.16.5 5-32 Amps TPN Each 24 1547 37128.00
d 6.16.6 40-63 Amps TPN Each 3 1936 5808.00
13 6.18 47 Supplying, fixing and wiring Earth Leakage
Miniature Circuit Breaker [ELMCB] 240/450V up
to 300mA sensitivity on existing wood/panel
board.
a 6.18.2 47 32-40 Amps 2 pole Each 3 2623.00 7869.00
b 6.18.3 47 32-40 Amps 4 pole Each 3 2936.00 8808.00
14 6.43 50 Supplying and fixing of Metal Socket set of 2pole
and earth plugs and socket for incorporating SP
and TP MCB (Without MCB ). The entire plug and
socket shall b mounted in a Thermoplastic /
powder coated metal box & wired Completely.
A) SP & N
a 6.43.2 b) 20 Amps Each 4 918.00 3672.00
SUPPLY OF FITTING
15 4.7 20 Supplying Box Type Suitable for 28 W T5 Single /
Twin lamp & suspension mounted luminaire &
optical reflector,prewired with HF Electronic
Ballast,push fit type lamp holders & main
connectors. Channel cover shall be made of
CRCA MS Sheet and finishing is done with stove
enamelled white with end caps made of
engineering Plastic.
Group - A
a 4.7.1 1 X 4'-28 Watts Each 112 990.00 110880.00
b 4.7.2 2 X 4'-28 Watts Each 6 1680.00 10080.00
RITES Ltd.,
For and on behalf of DET 20 Signature of the Bidder
Rate Amount SN Item No P.No. Description Unit Qty
16 4.23 24 Supplying CFL mirror light fitting with 1x11W
CFL lamp, choke, Perspex cover and completely
wired for use on 230V 50Hz AC supply.
Each 2 648.00 1296.00
17 4.17 22 Supplying High pressure Metal halide street
light luminary suitable for use with high pressure
metal halide lamp with integrated control gear &
grey color powder coated. The fitting shall be non
corrosive pressure die cast aluminum housing
with high purity anodized aluminium reflector with
EPDM Gaskets suitable for Outer Dia of pole
40mm - 60mm. Cable Entry through a cable gland
with toggle clips. IP65 Protection for both optical &
Electrical Compartment. Bottom cover may be
with Poly carbonate/tempered/ toughened glass.
Luminaire efficiency should be >60 % & ambient
temperature > 35 deg C. High Intensity Discharge
Electro Magnetic Ballast with Copper winding of
Orthocyclic winding coil. Class H insulated dual
coated copper wire. Compliance to IEC 61347-2-9
Safety & IEC 60923 - Performance. Winding
Temperature for HID Ballast Tw = 130 deg C &
temperature rise ?T = 70 deg C. Luminaire shall
be suitable to operate on 230/250 Volts 50 Hz AC
supply finish including wiring, ignitor, condenser.
SS Toggles for opening front hingeable glass.
a 4.17.2 23 150Watts Each 1 6300 6300.00
18 9.3 78 Supplying capacitor type ceiling fan complete
with down rod blades, shackle, canopies etc., for
operation on 230 volts, 50 cycles. Single phase
AC supply conforming to ISS-374-1979 and with
double ball bearing system.
9.3.1 48" Sweep (1200mm)
a 9.3.1.1 78 Regular model Each 48 2376.00 114048.00
19 9.2 78 Supplying of 1440rpm heavy duty exhaust fan
with bracket blades suitable to operate on 230V
50Hz, AC Supply complete.
a 9.2.1 78 12" Sweep (300mm) Each 16 3654.00 58464.00
20 4.2 20 Supplying and fixing PBBC/Bakelite straight or
slant batten holder and wiring with 60 W / 230
volts lamps. Each 12 88.00 1056.00
21 16.1 104 Supplying and fixing one of 230 volts bell or
buzzer and a flush type bell push with gang box
fixed on necessary wooden or rawl plugs using NF
screws. Each 2 145 290.00
RITES Ltd.,
For and on behalf of DET 21 Signature of the Bidder
Rate Amount SN Item No P.No. Description Unit Qty
FIXING CHARGES
22.0 17.2 108 Supplying and Fixing........mm dia class A GI pipe
bracket up to 2.7 meters long terminated with a
reducing collar of 40x25mm to which extra pipe of
175mm length is fixed for fixing MV/SV/MH/FTL
street light fitting of all capacities on
rail/RCC/wall/tubular pole, using suitable clamps,
bolts ,nuts and wiring using suitable capacity wires
etc complete.
a 17.2.2 108 Using 32mm dia G.I.pipe Each 1 1140.00 1140.00
23 17.7 108 Fixing all types and all capacities of fluorescent /
false ceiling / spot light / CFL / LED fittings
indoor on the wall / ceiling/ rafters / girders
using 23/0.0076” twin twisted PVC insulated
wires, required Nos of round blocks and clamps
a 17.7.1 108 On wall / ceiling / Rafter / Girders Each 120 98.00 11760.00
24 17.8 109 Fixing a ceiling / Wall mounting fan of all
capacities and all types to the existing 'S' hook
with fan regulator to the existing board together
with supplying and fixing 5 amps. ceiling rose,
necessary length of 23 / 0.0076 inch PVC
insulated twin twisted copper wire and wiring.
Each 48 139.00 6672.00
25 17.12 109 Fixing one exhaust fan in the nitch already left in
the wall with bolts and nuts and 5 amps. Ceiling
rose with sufficient length of 23 / 0.0076 inch PVC
insulated twin core wire. Each 16 412 6592.00
26 17.5 108 Fixing halogen/metal hallide / SVL / IL / LED
floodlight fitting over existing pole / wall ceiling
including clamps, bolts, nuts and wiring using
suitable capacity wires. Each 1 176.00 176.00
27 11.1 85 Supplying and drawing UTP-CAT 6E LAN cable.
Mt. 380 23.00 8740.00
28 11.2 85 Supplying and drawing PVC flexible one pair
telephone unarmoured tinned copper cable.
a 11.2.2 85 2 Pair mtr 160 13 2080.00
29 1.4 2 Supplying and fixing sheet metal box made out of
18 SWG sheet metal with necessary holes for
cable/conduit entry as required with one coat of
primer of approved make etc.
a 1.4.7 2 200 x 200 x 65 mm Each 4 157.00 628.00
30 7.4 55 Supplying of 1.1 KV LT UG cable having
aluminium conductor PVC insulated, extruded
inner sheated , galvanized , steel strip (except 2C
X 10 Sq.mm wire armoured) confirming to IS -
3975 : 1990 (No. of strip indicated in GTP) &
extruded PVC outer sheated armoured cable with
specified IS - 1554 Part - 1:1988 & confirming to
GTP of Group - A.
7.4.4 55 4 core 16 sqmm Mtr 320 140.40 44928.00
RITES Ltd.,
For and on behalf of DET 22 Signature of the Bidder
Rate Amount SN Item No P.No. Description Unit Qty
31 7.8 61 Labour charges for laying of 1.1 KV class UG
cable in existing trench GI pipe / stoneware pipe /
on wall / on pole as required.
In existing trench / duct.
7.8.1 61 6 sqmm to 16 sqmm Mtr 320 10.80 3456.00
.
32 7.9 61 Digging of trench of 0.6m deep X 0.50 mtr wide
refilling the trench to the required ground level and
consolidating etc., complete. (As per Civil SR
KSRB I - 2, P - 7)
7.9.2 62 In soil (hard) Mtr 120 106.00 12720.00
33 7.10 62 Providing and filling sand in excavated trench to
cover already laid UG cable to adepth of 150 mm
all - round the cable. Mtr 120 103.00 12360.00
34 7.14 62 Supplying and fixing of heavy duty cable glands
suitable for UG cable of 1.1 KV class (metal only)
7.14.2 62 25 mm dia Each 14 86.00 1204.00
35 7.21 64 Supplying tinned copper lugs and crimping and
wiring to terminal point for wire of the following
sizes.
7.21.6 64 16 sqmm Each 56 11.31 633.36
EARTHING
36 7.2 55 Supplying fixing and wiring earth electrode for
grounding of lifts, transformers, DG sets etc.
using 40mm dia 2.9mm thick 2.5 mtr long GI pipe
with GI funnel with mesh and suitable size reducer
fixed on the top of the earth electrode. The funnel
should be enclosed in a CC chamber of
400x400x400mm with a cast iron cover. The earth
electrode shall have staggered holes of 12mm dia
and the electrode should be covered 150mm
alround with alternate layers of salt and charcoal
from the bottom of the CC chamber. The
connection from the electrode is to be established
through GI strip using GI bolts and nuts.
Each 3 4317.00 12951.00
37 7.3 55 Supplying and running of GI/Copper strips for
grounding connections, using necessary fixing
materials as required.
GI strip
a 7.3.1 55 25 x 3 mm Mtr 60 77.00 4620.00
c 7.3.10 55 600 x 600 x 3 mm copper plate Each 1 7148.00 7148.00
38 7.22 64 Supplying and running GI/Copper conductor for
grounding and (along with other wires in conduit
system of wiring) using necessary suitable size
clamps, nails, guttas/spacers etc.,
Copper Wire.
b 7.22.6 64 8 SWG Mtr 60 107.70 6462.00
RITES Ltd.,
For and on behalf of DET 23 Signature of the Bidder
Rate Amount SN Item No P.No. Description Unit Qty
39 7.12 62 Supplying and fixing of class A (medium duty) GI
pipe of wall thickness not less than 3.25mm on
pole/wall/drain crossing with necessary clamping
arrangements for UG cable of 1.1 KV.
a 7.12.2 62 50mm Mtr 20 391.00 7820.00
Part A - KPWD SR Items - Electrical works 1754001.36
Total Quoted Cost of Electrical Items based on Percentage Quoted
Plus / Minus / At par
Percentage above / below / at par of KPWD-SR 2014-15 for Electrical Works to be indicated for all the above
items
Percentage in
figure
(+) / (-) / At par
Amount in Figure
(Rupees)
Amount in Words
(Rupees)
Percentage in
words
RITES Ltd.,
For and on behalf of DET 24 Signature of the Bidder
SN Description of Work Unit Qty Rate Amount
Part B - Market Rate Items
Sub MV Panel
1 Supply, installation, testing and commissioning of LT
Sub MV Panel fabricated out of 16 SWG sheet steel
metal floor mounting type with all normal practice like
derusting, degreasing, phosphating, powder coated to
the approved make as per specification, comprisiing of
the following:-
Incomer
I. 125 A 3P MCCB 35 KA breaking capacity - 1No.
ii. 250A Al Bus bar (RYBN)
iii. RYB phase indication lamps - 1set
iv.0-500 V Voltmeter with selector switch -1no
v.0 - 300 A Ammeter With selector switch-1no
Outgoing
iii. 63 A 4Pole 16 KA MCCB - 12 nos.
iii. 40 A 4Pole MCB - 3 nos. Nos 1.00
2 Supplying and fixing Moulded Case Circuit Breaker
(MCCB) over the existing wood / panel board using
necessary screws, bolts, nuts and wiring complete.
Protection of Overload and Short circuit with thermal
Magnetic / Micro processor release and Earth Fault as
per IS - 13947. (Icu = Ics)
63 Amps 16 KA (Three Pole) Each 6.00
Part B - Market rate Items - Electrical works
The bidder is required to quote his rates in figure
and words for Part B-Non SR items of Electrical
works
Construction of Govt. ITI at Turuvekere in Tumkur District - Electrical Works
Total Amount in Words (Rupees)
RITES Ltd.,
For and on behal of DET 25 Signature of the Bidder
SN DESCRIPTION AMOUNT
Civil Works
1 Part A - KPWD SR Items `
2 Part B - CPWD SR Items `
3 Part C - Market rate Items `
4 Part D - Panchayat Raj SR Items `
Electrical Works
1 Part A - KPWD SR Items `
2 Part B - Market rate Items `
TOTAL - Schedule II `
TOTAL
(in Words) - Rupees
Construction of Govt. ITI at Koratagere in Tumkur District
ABSTRACT - Schedule II
RITES Ltd.,
For and on behalf of DET 26 Signature of the Bidder
Description Unit Qty
P. No l No
Part- A - KPWD SR Items
1 132 18.13 KSRRB M200-10.1. Clearing and grubbing road land including
uprooting rank vegetation, grass, bushes, shrubs, saplings and
trees girth up to 300 mm, removaL of stumps of trees cut earlier
and disposal of unserviceable materials and stacking of
serviceable material to be used or auctioned, including removal
and disposal of top organic soil not exceeding 150 mm in
thickness complete as per specifications. I. By Manual Means:
A. In area of light jungle. MORTH Specification No. 201
Ha 0.210 42301.00 8883.21
2 5 2.1 KSRB 2-1.1 Earth Work in Surface excavation in ordinary soil
for levelling and lowering the ground manually (other than
foundation of buildings, culverts, road drain and trenches of
pipe lines and cables) and removing the excavated stuff to a
distance not exceeding 50m and lift upto 1.5m excavated
surface levelled and neatly dressed, disposed earth to be
levelled after breaking the clods and neatly dressed as per
specifications. No KBS 2.1 (b)/2.3.1Cum 800.000 136.00 108800.00
3 5 2.3 KSRB 2-2.1 Earth work excavation for foundation of buildings
either in pits or trenches 1.5m and above in width in Ordinary
soil not exceeding 1.5m in depth, including dressing the bottom
and sides of pits or trenches, stacking the excavated soil clear
from edges of excavation with lead upto 50 m after breaking of
clods complete as per specifications.
Cum 296.030 163.00 48252.89
4 5 2.4 KSRB 2-2.2 : Earth work excavation for foundation of buildings,
water supply, sanitary lines and electrical conduits either in pits
or in trenches 1.5m and above in width in Hard soil not
exceeding 1.5m in depth, including dressing the bottom and
sides of pits and trenches, stacking the excavated soil clear
from edges of excavation with lead upto 50 m after breaking of
clods complete as per specifications. Specification No. KBS 2.1
(b)/2.3.5Cum 493.390 245.00 120880.55
5 5 2.6 KSRB 2-2.4 :Excavation 1.5m.and above in width, in soft rock
without blasting for foundation of buildings, culverts, water
supply, sanitary lines and electrical conduits either in pits or in
trenches not exceeding 1.5m.in depth, stacking the excavated
stuff from edges of excavation with lead upto 50 m including
cost of explosives, labour and HOM of equipment complete as
per specifications. Specification No.KBS 2.1.C / 2.9.4/2.18/2.19
Cum 197.360 764.00 150783.04
6 6 2.10 KSRB 2.3 : Filling available excavated earth ( excluding rock )
in sides of foundations upto plinth in layers not exceeding 20
cms. in depth, compacting each deposited layer by ramming
after watering with lead upto 50 m. and lift upto 1.5 m. including
cost of all labour complete as per specifications. specification.
No. KBS 2.9Cum 1786.780 110.00 196545.80
Construction of Govt. ITI at Koratagere in Tumkur District
SN Bengaluru SR -
2014-15
Rate Amount
RITES Ltd.,
For and on behalf of DET 27 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
7 9 3.2 KSRB -3.2: Providing and injecting chemical emulsion for Pre-
constructional Anti-Termite Treatment, creating continuous
chemical barrier under and around the column pits,walls
,trenches,basement excavation,top surface of the plinth filling,
junction of wall and floor, along the external perimeter of
building, expansion joints, over the top surface of consolidated
earth on which apron is to be laid, surrounding of pipes and
conduits, with chloropyriphos emulsifiable concentrates of
20%concentration, including cost of chemical, diluting in water
to one percent concentration, labour, HOM of equipments,
complete as per specifications.(Plinth area of the building at
ground floor only shall be measured ) Specification No. KBS
3.2.6 / 3.2.7
Sqm 1000.000 100.00 100000.00
8 12 4.3 KSRB 4-1.3: Providing and laying in position plain cement
concrete of mix M7.5 with OPC cement @ 180kgs, with 40mm
and down size graded granite metal coarse aggregates @
0.85cum and fine aggregates @ 0.57cum machine mixed,
concrete laid in layers not exceeding 15cms, thick, well
compacted, in foundation and plinth including cost of all
materials, labour, HOM of machinery, curing complete as per
specifications. specification No KBS 4.1,4.2
Cum 144.610 4488.00 649009.68
9 13 4.7 KSRB 4-1.7: Providing and laying in position plain cement
concrete of M 10 with OPC cement @220 kgs with 20mm and
down size graded granite metal coarse aggregates @ 0.84 cum
and fine aggregates @ 0.56 cum, machine mixed, concrete
laid in layers not exceeding 15 cms, thick, well compacted, in
foundation and plinth and cills, inclduing cost of all materials,
labour, HOM of machinery, curing complete as per
specifications. Specification No KBS 4.1,4.2
Ground Floor Cum 13.890 4896.00 68005.44
First Floor Cum 8.150 4946.00 40309.90
Second Floor Cum 3.140 4996.00 15687.44
10 14 4.12 KSRB 4-2.7: Providing and laying in position reinforced cement
concrete of design mix M 25 with OPC cement @ 340 kgs with
20mm and down size graded granite metal coarse aggregates
@ 0.70 cum and fine aggregates @ 0.47 cum, with
superplastisiser at 3.0 lts. conforming to IS103-1999 reaffirmed -
2008, machine mixed, concrete laid in layers not exceeding 15
cms, thick, vibrated for all works in foundation plinth and ground
floor level for roof slabs, staircase, lintels, retaining wals, return
wall, wall (any thickness) including attached plasters, columns,
piers, abutments, pillers, posts, struts, buttresses, string or
lacing courses, parapets, coping, bed blocks, anchour blocks,
plain windows cills, fillets etc., inclduing cost of all materials,
labour, HOM of machinery, curing complete as per specification
No KBS 4.1,4.6
Ground Floor Cum 509.800 5945.00 3030761.00
First Floor Cum 94.520 5995.00 566647.40
Second Floor Cum 1.730 6045.00 10457.85
11 15 4.28 KSRB 4-6.1 : Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for
foundations, footings, bases of columns for mass concrete
including cost of all materials, labour complete as per
specifications. Specification No. KBS 4.6.2
Sqm 288.000 219.00 63072.00
RITES Ltd.,
For and on behalf of DET 28 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
12 15 4.18 KSRB 4-6.2: Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for flat
surface such as suspended floors, roofs, landings, balconies
and likes, thickness up to 200mm including cost of all materials,
labour complete as per specifications. for 0-3.5m Height ,
Specification No. KBS 4.6.2Sqm 300.00 296.00 88800.00
13 15 4.29.2 KSRB 4-6.2: Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for flat
surface such as suspended floors, roofs, landings, balconies
and likes, thickness up to 200mm including cost of all materials,
labour complete as per specifications. for 0-5m Height ,
Specification No. KBS 4.6.2Sqm 900.00 530.00 477000.00
14 15 4.29 KSRB 4-6.2: Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for flat
surface such as suspended floors, roofs, landings, balconies
and likes, thickness up to 200mm including cost of all materials,
labour complete as per specifications. Specification No. KBS
4.6.2
4.29.3 do- 0 to 6 mts Sqm 44.16 700.00 30912.00
15 16 4.32 KSRB 4-6.5: Providing and removing centering, shuttering,
strutting, propping etc., for columns, pillars, piers, abutments,
post and struts, square /rectangular / polygon in plan including
cost of all materials, labour complete as per specification.
Specification No. KBS 4.6.2
Ground Floor Sqm 746.88 358.00 267383.04
First Floor Sqm 154.68 343.00 53055.24
Second Floor Sqm 23.76 348.00 8268.48
16 16 4.34 KSRB 4-6.7: Providing and removing centering, shuttering,
strutting, propping etc., an removal of form work for sides and
soffits of beams, beam haunchings, cantilever girders,
bressumers and lintels not exceeding 1m in depth including cost
of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2
Ground Floor Sqm 1087.940 261.00 283952.34
First floor Sqm 318.440 246.00 78336.24
17 17 4.37 KSRB 4-6.10: Providing and removing centering, shuttering,
strutting, propping etc., for chajjas, corbels etc., including edges
including cost of all materials, labour complete as per
specification. Specification No.KBS 4.6.2
Ground Floor Sqm 59.40 270.00 16038.00
First Floor Sqm 19.80 255.00 5049.00
18 17 4.38 KSRB 4-6.11: Providing and removing centering, shuttering,
strutting, propping etc., and removal of form work for
stairs(excluding landing) except spiral staircase including cost
of all materials, labour complete as per specification.
Specification No. KBS 4.6.2
Ground Floor Sqm 27.680 474.00 13120.32
First Floor Sqm 27.680 459.00 12705.12
19 19 4.46 KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C
work including straightening, cutting, bending, hooking, placing
in position, lapping and / or welding wherever required, tying
with binding wire and anchoring to the adjoining members
wherever necessary complete as per design (laps, hooks and
wastage shall not be measured and paid) cost of materials,
labour, HOM of machinery complete as per specifications.
Specification No. KBS 4.6.3
4.46.2 For TMT bars Fe 500 Tonne 61.820 72548.00 4484917.36
RITES Ltd.,
For and on behalf of DET 29 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
20 19 4.47 Lift charges for steel of all diameters for additional floors over
ground floor per floor height of 3.5m or part thereof cost of
labour, complete as per specifications. Specification No. KBS
Tonne 9.630 409.00 3938.67
21 25 5.3 KSRB-5.1-3 : Providing and cosntructing Granite/ trap/ basalt
rubble stone masornry in foundation cement mortar 1:6,
(Uncoursed) bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per
specifications. KBS 5.1.12 Cum 73.800 2831.00 208927.80
22 25 5.6 KSRB-5.2.3: Providing and constructing Granite/ trap/ basalt
size stone masornry in foundation cement mortar 1:6, stone
hammerd dressed in courses not less than 20 cms high, bond
stones at two m.apart in each course including cost of
materials, labour, curing complete as per specifications. KBS
5.1.13 Cum 61.200 3552.00 217382.40
23 27 5.27 KSRB 5-14: Providing and constructing precast concrete solid
blocks with compressive strength not less than 35Kg/Sqm with
cement mortar 1:4 masonry (quoin, jamb, closer blocks) with
solid concrete blocks of size 40X20X20cms conforming to 1.S:
2185/1965 in superstructure including cost of materials, labour
charges, scaffolding, curing complete as per specifications.
Ground Floor Sqm 1303.940 920.00 1199624.80
First Floor Sqm 481.210 950.00 457149.50
Second Floor Sqm 114.350 980.00 112063.00
24 27 5.28 KSRB 5-15: Providing and constructing non load bearing wall
with cement concrete solid blocks with compressive strength
not less than 35Kg/Sqm with cement mortar 1:4 masonry (jamb,
closer blocks) with solid concrete blocks of size 40X10X20cms
(l X b X h)conforming to 1.S: 2185/1965 in superstructure
including cost of materials, labour charges, scaffolding, curing
complete as per specifications.
Sqm 76.920 671.00 51613.32
25 36 7.17 KSRB 7.17 : Providing, fabricating, assembling and fixing in
position aluminium doors using following aluminium mat finish
or glossy finish, outer frame plain section 101.6x44.45mm
thickness 3.18mm, section weight 2.404 kg/m, door shutters
vertical section 44.62x44.45mm thickness 3.18mm, section
weight 1.505kg/m, top section 47.62x44.45mm thickness
3.00mm, section weight 1.426kg/m bottom section 114.3x44.45
thickness 3.18mm, section weight 2.646kg/m, door central
section 49.91x44.45mm thickness 3.00mm, section weight
1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm
section weight 0.124kg/m; aluminium sections cut to length joint
metred cornersgrinded, the shutters pivoted opening
arrangement with heavy duty aluminium alloy automatic door
closures floor mounted, providing and fixing standard approved
accessories, such as aluminium handle for full width or length,
tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m.
thick plain glass for top and bottom panel; aluminium sections
treated for removal of any rust and prevention of further rust
formation,
RITES Ltd.,
For and on behalf of DET 30 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
and coated with greasy materials for non-adherance of mortars
or any other sticky materials; the assembled frame fitted with
the corner angles, strips and fitted with screws, rawl plugs or
teakwood gutties to R.C.C. columns or masonry on sides.
beams and flooring in bottom. including cutting, chistling and
making good with cement mortar to match the surface; all the
frames throughly cleaned free from rust, scale, or dirt including
cost of materials, fixtures, labour and HOM of machinery
complete as per specifications.
7.17.2 using aluminium section powdered coated to a minimum of 60-
70 microns with exterior durable pure polyester grade powder of
approved quality. Sqm 7.200 6086.00 43819.20
26 39 7.24 "Providing and fixing cold rolled prepainted steel windows of IS
standards, made out of 0.6mm thick deep drawing quality
galvanised on both sides 120gms/sq.mtr. Primer coat upto 5
microns with thermosetting epoxy resin and finish painted with a
polyester based paint 20 microns thick. The size of profiles is
approximately 46 x 52mm for external frames, 46x46mm
section for shutters, 46x70mm section for centre
mullion/transom and 18x31mm section is for fixing glasses. The
section should be cut to length joint mitred and assembling by
means of corner brackets made out of cold rolled cold annealed
strips of 1.2mm thick duly galvanised and fixed with nickle
plated self taping screws.The shutters are provided with
approved quality of fixtures like handles made out of zamac
alloy die cast and powder coated, receiver made out of glass
filled nylone and hinges made out of
CRCA powder coated. 4mm thick glass should be fixed with
EPDM gaskets. Guard bars fabricated out of 10mm square
bright bars shall be fixed horizontally at 125mm C/C by rivetting
to the external frame. The above frames are fixed to the
concrete / masonry walls by means of self expanding screws.â€
with 4mm float glass with gaurd bars
39 7.24.1( c) 4mm float glass with gaurd bars
Ground Floor Sqm 97.740 4000.00 390960.00
First Floor Sqm 39.020 4005.00 156275.10
27 42 7.35 Providing and fixing M.S hand railing for Balcony/staircase etc.,
with 50mm dia M.S hollow pipe of 14 gauge, welded to
20mmX20mm M.S. square rod placed vertically, spaced at
100mm at regular inetrvals of 600mm. These veryical rods
laterally tied to 3 horizontal rods spaced at equal interval. These
assembly is fixed to concrete by using expansion bolts and
welding the same to reinforcement bars and making good the
surface. ALl the joints and sections should be cut to length,
welded and grinded wherever necessary etc., complete. The
work includes cost of all materials, labour charges for all items
of work, hire charges for welding, cutting and grinding
equipment, and electricity charges etc., complete as per
specification and drawing
Sqm 20.000 2614.00 52280.00
28 49 8.3 KSRB 8.3-1 : Providing and laying to required line and slope
roofing with corrugated asbestos cement sheet 6mm. thick fixed
with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I
plain and bitumen washers over the existing purlins, rafters and
trusses including cost of materials, labour, complete as per
specifications. Specification No. KBS 8.5
Sqm 35.000 348.00 12180.00
RITES Ltd.,
For and on behalf of DET 31 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
29 62 9.93 Providing and fixing factory made single leaft rigid GRP
Sandwich composite door shutter of 32mm thick, laminated with
two GRP skins with wood grain finish, fabricated using U.V-
stabilized Isopathic Gelcoat and on layer of 45 gsm E-class
Chopped strand Mat (CSM), impregnated with orthopthalic
polyster resin. The thickness of the skins shall not be less than
1.5mm. Expanded Polystyrene (EPS) structural foam panel of
29mm thickness and a density of 20Kg/m3 shall be used as
core mterial. Wooden reinforcements made of seasoned
Salwood block of cross section not less than 28mmX32mm and
also necessary salwood reinforcements for fixing the metal
fittings such as tower bolts, aldrops, handles etc shall be
provided. A structural adhesive compatible with EPS foam shall
be used for bonding the core material, the salwood
reinforcement and the skins.
The material and process for manufacturing the door shutters
shall confirm to RV/TIFAC composites Design Centre standards
and specifications and the door shutters tested in confirmation
to IS 4020-1994. The finish of shutter will be plain colour
White/Ivory/Beige/Light Grey or any other colour using high
quality pigments. Excluding cost of fixtures and inclusive of
supply of shutters to respective work spot.
Sqm 15.120 3200.00 48384.00
30 63 9.96 Providing and fixing 65mm X 125mm GRP Door frame
fabricated using E-Glass Chopped Strand Mat (CSM) U.V -
sablized Isopathlic Gelcoat and Isopthalic resin. The thickness
of the GRP Skin shall not be less than 2.0mm. The door frame
consists of four segments, which are provided with plug-in-
socket arrangement in-situ in the mould. The segments are
plugged in and are joined together by means of screws. The
GRP frame shall be provided with wooden reinforcement on 6
locations for high screw holding capacity for fixing metalling
hold fast and shall be consolidated by filling with medium
density foam/plaster of paris with fibre reinforcement. Six
numbers of 260mmX25mmX5mm size S shaped M.S. flat hold
fast shall be provided with the frame.
m 40.800 565.00 23052.00
31 67 11.1 KSRB 12-1.1 : Providing and laying in position to required level
or slope 100mm internal diameter salt glazed stoneware pipes
grade A and jointing with stiff mixture of cement mortar in
proportion of 1:1, testing of pipes and joints, including cost of
materials, labour charges complete as per specifications.
Specification No. KBS 12.2.5/12.7Rmt 50.000 219.00 10950.00
32 67 11.2 KSRB 12-1.2: Providing and laying in position to required level
or slope 150mm internal diameter salt glazed stoneware pipes
grade A and jointing with stiff mixture of cement mortar in
proportion of 1:1, testing of pipes and joints, including cost of
materials, labour charges complete as per specifications.
Specification No. KBS 12.2.5/12.7
Rmt 60.000 340.00 20400.00
RITES Ltd.,
For and on behalf of DET 32 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
33 68 11.37 KSRB 12-5.1: Construction brick masonry circular type man
hole 0.91m internal diameter at bottom 0.91m and 0.56mt dia
at top with table moulded non modular bricks of class
designation 50 in cement mortar 1:4, inside cement plastered
12mm thick with cement motar 1:3, finished with floating coat of
neat cement , foundation concrete of 1:3:6 mix using 40mm and
down size granite metal and making neccessary channel in
cement concrete 1:2:4 with 20mm and down size granite metal
finished with floating coat of of neat cement wit SFRC cover and
frame (heavy duty, HD-20 grade desination) 560mm internal
diameter confirming to IS 12592, total weight cover and frame
to be not less than 182 Kg fixed in cement concrete 1:2:4 20mm
and down size broken granite metal providing and removing
centering shuttering including cost of material , labour charges
HOM of machineries complete as per specification NO KBS12.4
Nos 2.000 12202.00 24404.00
34 70 11.50 KSRB 12-8.1 : Constructing brick masonry inspection chamber
455x610mm, and 450mm depth. (clear inside dimension) for
single pipeline, using table moulded non-modular bricks of class
designation 50 in cement mortar 1:5, C.I cover with frame (light
duty) 455x610mm internal dimensions. total weight of cover with
frame to be not less than 38 kg (weight of cover 23kg and
weight of frame 15 kg) R.C.C. top slab with cement concrete
1:2:4 mix 20mm and downsize granite metal, foundation
concrete 1:5:10 with 40mm and downsize granite metal inside
plastering 12mm thick with cement mortar 1:3, finish smooth
with a floating coat of cement on walls and bed concrete
complete as per standard design including cost of materials,
labour charges, curing complete as per specifications.
Nos 4.000 6227.00 24908.00
35 71 11.52 KSRB 12-8.2: Construction brick masonry inspection chamber
500x700mm and 450mm depth (clear inside dimension) for
pipeline with one or two inlets, using table moulded non modular
bricks of class designation 50 in cement mortar 1:5 , CI cover
with frame ( light duty) 455x610mm internal dimension, total
weight of cover with frame to be not less than 38Kg (weight of
cover 23kg and weight of frame 15kg) RCC top slab with
cement concrete 1:2:4 mix 20mm and downsize granite metal,
foundation concrete 1:5:10 with 40mm and downsize granite
metal inside plastering 12mm thick with cement mortar 1:3
finished smooth with floating coat of cement on walls and bed
concrete complete as per standard design including cost of
materials, labour charges, curing complete as per
specifications.
Nos 2.000 7060.00 14120.00
36 74 12.2 KSRB 11.1 : Providing and fixing white vitreous chine clay water
closet Orissa pattern of size 580mm X 440mm with integral type
footrests, 100mm S or P tarp, 10 litres low level, PVC flushing
cistren (all are approved make) with fittings, CI /MS brackets,
32mm dia flush pipe fittings and clamps, overflow arrangements
with special and 25mm mosquito proof coupling of approved
design, painting of fittings and brackets, cutting and making
good the wall and floor wherever required, including cost of
materials, labour complete as per specifications. KBS 11.
pan 6.000 4267.00 25602.00
RITES Ltd.,
For and on behalf of DET 33 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
37 74 12.5 KSRB 11.5 Providing and fixing white vitreous china clay water
closet European type (pedestrial type, P trap) with black solid
plastic sheet and lead cover, CP brass hinges, rubber buffer 10
litres low level PVC flushing chintrens with fittings CI / MS
bracket 50 mm dia meter flush bend with fitting and clapms over
flow arrangements with special and 25 mm mosquitto proof
coupling of approved design and painting of fitting and brackets
cutting and making good the wall & floor required including cost
of material etc. complete as per specification no. 11.
Each 4.000 4934.00 19736.00
38 75 12.7 KSRB.11.8.1: Providing and fixing white vitreous china clay flat
back, lipped front urinal basin of size 430X260X350mm with 5
litres PVC automatic flushing cistern, CI/MS brackets standard
flush pipe and cp brass spreaders with brass union and GI
clamps complete painting of fitting and brackets cutting and
making the good wall and floor wherever required inlcuding cost
material labour complete as per specification No. KSB 11.
Unit 8.000 2813.00 22504.00
39 78 12.26 KSRB 11-11.4 : Providing and fixing white vitreous china clay,
flat back wash basin size 550X400mm with a single 15mm CP
brass pillar tap with CI / MS brackets, 32mm CP brass waste of
standard pattern, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including
cost of materials, labour complete as per specifications. No.
KBS 11 Unit 6.000 2677.00 16062.00
40 79 12.34 KSRB 11-13.2 : Providing and fixing Laboratoru sink of white
glazed fire clay of size 600x450x200mm with M.S / C.I brackets
, C.P brass chain with rubber plug, 32mm C.P brass waste, tap
with union, brass stop cock complete, painting of fittings and
brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per
specifications. KBS11Unit 4.000 3222.00 12888.00
41 79 12.39 KSBR 11-15.1: Providing and fixing 600x450mm bevellead
edge mirror of superior glass with 6mm hard board backing and
fixed to wooden cleat with CP Screws, washers, including cost
of materials, labour complete as per specification.
Unit 6.000 1229.00 7374.00
42 80 12.47 KSRB 11-18.1.1 : Providing and fixing sand cast iron soil waste
and vent pipe 100mm dia with spun yard coaked in cement
slurry and cement mortar 1:2 including cost of materials, labour,
testing complete as per specifications, KBS 11-1.10
m 10.000 696.00 6960.00
43 85 12.112.2 Providing stoneware gully trap of approved quality and make
fixing in CC1:2:4 and plastering with CM1:3 wherever
necessary. (Rate includes cost of all materials, fixtures and
lead) 15x10cms Each 10.000 270.00 2700.00
44 85 12.113.1 Providing and fixing C.I. Nahani trap of approved make
confirming to ISI specification and construction of cistern in M-
15 as per direction (Rate is inclusive of cost of materials and
fixtures and conveyance of materials to work spot) 10x7.5cms
Each 10.000 250.00 2500.00
45 87 13.1 KSRB13-1.1 : Providing and fixing to wall, ceiling and floor
galvanised / mild steel tube 15mm dia nominal bore with fittings
(medium grade weight 1.27 kg/mtr) B class including cost of all
materials, labour charges, HOM of equipments and testing
complete as per specifications. Specification No. KBS
13.2.14/13.8
RITES Ltd.,
For and on behalf of DET 34 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
15 mm dia m 100.000 179.00 17900.00
46 87 13.2 20 mm dia m 100.000 218.00 21800.00
47 87 13.5 40 mm dia m 75.000 425.00 31875.00
48 87 13.6 50 mm dia m 250.000 498.00 124500.00
49 88 13.20 KSRB 13-4.1: Making connection GI distribution branch with GI
main of 25 to 40mm nominal bore including cutting and
threading the pipes, providing and fixing Tee, nuts, labour for all
item of works, testing and HOM of equipments complete as per
specifications. Specification No. KBS 13.10
Nos 50.000 332.00 16600.00
50 88 13.23 KSRB13-6.1-1 : Providing and fixing in position brass bib cock
of approved quality 15mm nominal bore including cost of all
materials, labour and HOM of equipments with all leads
complete as per specifications. Specification No. KBS
13.2.2/13.3 Each 20.000 218.00 4360.00
51 88 13.26 KSRB 13-6.2-2: Providing and fixing in position brass stop cock
of approved quality 20mm nominal bore inlcuding cost of all
materials labour and HOM equipment with all leads complete as
per specification. KBS 13.2.2 /13.3
Each 5.000 160.00 800.00
52 88 13.34 KSRB 13.6.3.3 Providing and fixing in position brass gate Valve
with CI wheels of approved quality (screwed end ) 25mm dia 25
mm nominal bore including cost of all materials labour HOM of
equipment with all leads complete as per specification No. KBS
13.2.6 / 13.3 Each 5.000 590.00 2950.00
53 89 13.36 40 mm dia Each 5.000 1270.00 6350.00
54 90 13.70 KSRB 13-8.5: Providing and fixing to wall, ceiling and floor, low
density polyethylene pipes 6.00 kgf/sqcm working pressure
50mm outside diameter with special flange, compression type
fittings, wall clips, making good the wall, ceiling and floor,
including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications.
Specification No. KBS 13.2.15.1 /13.9
13.70.2 75mm dia m 40.000 297.00 11880.00
13.70.4 110mm dia m 175.000 421.00 73675.00
55 91 13.78 KSRB 13-11.1: Providing and placing on terrace, polyethylene
water storage tanks with man hole lid and suitable locking
arrangements, making holes of suitable diameter for inlet, outlet
and over flow pipes, including cost of all materials, labour,
transport charges, HOM of equipments and testing complete as
per specifications (for 1000 litre capacity). Specification No.
KBS 13.22Nos 3.000 8350.00 25050.00
56 91 13.79 Providing and fixing gun metal wheel valve conforming to IS
specification of approved make as per directions including all
ead and lifts etc., complete
13.79.2 For 20mm dia Each 12.000 365.00 4380.00
13.79.3 For 25mm dia Each 18.000 505.00 9090.00
13.79.4 For 32mm dia Each 15.000 740.00 11100.00
13.79.5 For 40mm dia Each 7.000 940.00 6580.00
13.79.6 For 50mm dia Each 5.000 1440.00 7200.00
57 107 14.36 KSRB 14.14-5: Providing Ceramic tiles of size 30x30cms of
approved make, shade and size for flooring, treads of steps and
landings laid on a bed of 12mm thick, cement mortar 1:3 mix
flush pointing with white cement using colour pigment, including
cost of materials, labour, curing. complete as per specifications.
108 14.36.2 ……do……. For ceramic tiles of size 30 x 30 cms Sqm 68.800 943.00 64878.40
RITES Ltd.,
For and on behalf of DET 35 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
58 108 14.41 KSRB 14-17.2: Providing skirling, dado, rises of steps with
colour glazed tiles 6mm thick on lOmm thick cement plaster 1:3
and Jointed with white cement slurry over rough plaster surface
(exculding cost of rough plastered surface which should be
measured and paid separetly) using glazed tiles of approved
make and size including cost of labour ,materials complete as
per specifications. Specification No KBS14.16,14.17.
108 14.41.1 ..do.. Colour glazed tiles 15cm x 15cm x 6mm thickSqm 88.500 942.00 83367.00
59 109 14.45 Providing and fixing vitrified glazed tiles of approved make,
quality & colour of size 600X600X10mm thick fixed on bed of 12
thick cement mortar for flooring, skirting and jointed with neat
cement slurry mixed with pigment to match shade of tiles,
including providing spacers at required interval and removing
stains etc., complete as per specification
Sqm 42.120 1044.00 43973.28
60 106 14.61 Providing and fixing 20mm thick gang saw water cut sadarhalli
grey granite in CM 1:4 proportion, cut to required shape, pattern
with paper joints, finished with cement mortar using white
cement and colour pigments to match the colour of slab making
through jointing with sealant, grooves in joints including cost of
curing.
14.61.1 minimum width of 1200 mm
Ground floor Sqm 214.330 1966.00 421372.78
First floor Sqm 309.390 1967.50 608724.83
61 110 15.16 KSRB 15-3.8: Providing 18 mm thick cement plaster in single
coat with Cement Mortar 1:4 to brick masonry including
rounding off corners wherever required smooth rendering .
Providing and removing scaffolding including cost of all
materials, labour,curing complete as per specifications.
Ground floor Sqm 1444.460 198.00 286003.08
First floor Sqm 469.110 203.00 95229.33
Second Floor Sqm 47.100 208.00 9796.80
62 110 15.19 KSRB 15-3.11 Providing 20 mm thick cement plaster in single
coat with Cement Mortar 1:4 to brick masonry including
rounding off corners wherever required smooth rendering .
Providing and removing scaffolding including cost of all
materials, labour,curing complete as per specifications.
Ground floor Sqm 804.650 210.00 168976.50
First floor Sqm 308.300 220.00 67826.00
Second Floor Sqm 216.880 230.00 49882.40
63 116 15.21 KSRB 15-3-13: Providing 12mm thick cement plaster in single
coat with Cement Mortar 1:3 to Ceiling including rounding off
corners wherever required smooth rendering . Providing and
removing scaffolding including cost of materials, labour,curing
complete as per specifications.
Ground Floor Sqm 1036.970 173.00 179395.81
First Floor Sqm 276.950 178.00 49297.10
64 116 15.30 Providing rough cement plastering 15mm thick in single coat
with cement mortar 1:4, to brick masonry for base of dadooing
works with sand of approved quality, providing and removing
scaffolding, including cost of materials, labour, curing complete
as per specificationsSqm 88.500 158.00 13983.00
RITES Ltd.,
For and on behalf of DET 36 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
65 117 15.33 KSRB 15-7 - Providing lime rendering for plastering to wait and
ceiling including cost of materials, labour, curing complete as
per specifications. Sqm 3274.590 20.00 65491.80
66 117 15.34 KSRB 15.8.1 : Providing and fixing plaster mesh 100 mm wide
manufactured out of hot dipped galvanised iron of nominal
thickness 0.35mm, with a zinc coating of 120 gms per sqm
width, along route of walls chipped for services, junction
between RCC and brick walls including cost of materials ,labour
for fixing, complete as per specifications. (length of mesh only
be measured for payment)m 500.000 29.00 14500.00
67 119 15.51.2 KSRB 15-15.1 : Providing and applying painting in two coats
with plastic emulsion paint of approved brand on wall surface to
give an even approved shade after thoroughly brushing the
surface, free from mortar drops and other foreign matter
including preparing the surface even and sand paper smooth,
cost of all materials , labour, complete as per specifications.
Sqm 3274.590 80.00 261967.20
68 120 15.55 KSRB 15-17.1 : Applying priming coat over new wood surface
and / or wood based surface with whilte lead paint priming
including preparing the surface after thoroughly cleaning oil,
grease, dirt and foreign matter, sand papering and knotting
ready mix paint including cost of materials, labour complete as
per specifications.
Ground Floor Sqm 110.400 30.00 3312.00
First floor Sqm 40.800 31.50 1285.20
69 121 15.60.1 KSRB 15-17.6: Providing and applying painting Two coats (
excluding priming coat ) on new wood surface and/or wood
based surface with enamel paint to give an even shade
cleaning the surface of all dirt dust and foreign matter, sand
papering including cost of materials, labour complete as per
specifications. Sqm 151.200 78.00 11793.60
70 31 7.1 KSRB 7.1 : Providing and fixing in position collapsible steel
shutters with single or double leaf with vertical channel
20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm
size, with top and bottom rails of T iron sections of 40x40x6 mm
with 38mm dia steel pulleys complete with bolt and nuts, locking
arrangements, stoppers, handles on both sides with 7.5cms
openings at 10 cms. c to c applying a priming coat of red lead
paint. cost of materials, labour, HOM of machinery complete as
per specifications. size of gate 2.4mx1.4m Specification No.
KBS 7.7 / 7.12
Sqm 7.200 4322.00 31118.40
71 31 7.5 KSRB 7.5 : Providing and fixing pull and push type rolling
shutters of approved make out of 18 guage, 75mm wide cold
rolled steel laths of convex corrugation, with side guides and
bottom rail, with interlocking arrangements for steel laths by
means of alternate clips, suspension shaft with High tension coil
type springs two numbers, mounted on specially designed pipe
shaft, with bracket plates, guide channels, ball bearing
arrangements, for inside & outside locking with push & pull
operations complete including pulling hooks, 4Nos. handles with
all fittings and accessories, painted with a coat of red lead paint
(without top cover) cost of materials, labour, HOM of machinery
complete as per specifications. Shutter size 3mx2.8 m
Specification No. KBS 7.10 / 7.12
Sqm 36.000 2661.00 95796.00
RITES Ltd.,
For and on behalf of DET 37 Signature of the Bidder
Description Unit Qty
P. No l No
SN Bengaluru SR -
2014-15
Rate Amount
72 31 7.6 KSRB 7.6 : Providing and fixing top covers made out of 20
guage M.S. sheet over pull and push rolling shutters bent to
shape including cost of red lead primer coat of painting ,
materials, labour, HOM of machinery complete as per
specifications. Specification No. KBS 7.10.6 / 7.12m 15.000 609.00 9135.00
73 117 15.75 KSRB 15-18.3 : Providing and applying enamel metal paint one
coat (excluding priming coat ) on previously painted steel or
other metal surface brushing to give an even shade after
cleaning oil, grease, dirt and other foreign matter, including cost
of materials, labour, complete as per specifications.
Sqm 58.200 48.00 2793.60
TOTAL - Part A - KPWD SR Items 17202380.24
Total Quoted Cost of Part 'A' - KPWD - SR Items based on Percentage Quoted
Percentage in
words
Plus / Minus / At par
Amount in Figure
(Rupees)
Amount in Words
(Rupees)
Percentage above / below / at par of KPWD-SR 2014-15 (Bengaluru Circle) to be indicated for the above items
Percentage in
figure
(+) / (-) / At par
RITES Ltd.,
For and on behalf of DET 38 Signature of the Bidder
SN Description Unit Qty Basic rate Amount in
Rs
PN Item No.
Part B - CPWD SR items
1 85 4.2 Providing and laying cement concrete in retaining walls, return walls,
walls (any thickness) including attached pilasters, columns, piers,
abutments, pillars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,
sunken floor,etc., up to floor five level, excluding the cost of centering,
shuttering and finishing:
4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size) Cum 66.02 6450.00 425829.00
2 88 4.17 Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1
Cement : 3 Coarse sand : 6 graded stone aggregate 20 mm nominal
size) over 75 mm of dry brick ballast 40 mm nominal size well rammed
and consoildated and grouted with fine sand including finishing the top
smoothSqm 114.00 419.30 47800.20
3 150 9.21 Providing and fixing ISI marked flush door shutters conforming to IS:
2202 (Part I) non-decorative type, core of block board construction with
frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters :
151 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws. Sqm 93.60 1909.55 178733.88
4 159 9.96 Providing and fixing Aluminium sliding door bolts ISI marked anodised
(anodic coating not less than grade AC 10 as per IS:1868) transparent
or dyed to required colour or shade with nuts and screws etc., complete.
9.96.1 300 mm X 16 mm Each 50.00 229.65 11482.50
5 159 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed
to required colour or shade with necessary screws etc. complete:
9.97.2 250 mm x 10 mm Each 120.00 95.25 11430.00
6 160 9.100 Providing and fixing Aluminium handles ISI marked anodised (anodic
coating not less than grade AC 10 as per IS:1868) transparent or dyed
to required colour or shade with necessary screws etc., complete.
9.100.1 125 mm ( for Doors ) Each 120.00 69.80 8376.00
7 160 9.101 Providing and fixing Aluminium hanging floor door stopper ISI marked
anodised (anodic coating not less than grade AC 10 as per IS:1868)
transparent or dyed to required colour or shade with necessary screws
etc., complete.
9.101.1 Single rubber stopper Each 60.00 37.50 2250.00
8 177 10.14 Providing and fixing pressed steel door frames conforming to IS: 4351
manufactured from commercial mild steel sheet of 1.60 mm thickness
including hinges, jamb, lock jamb, bead and if required angle threshold
of mild steel angle of section 50x25mm, or base ties of 1.60 mm
pressed mild steel welded or rigidly fixed together by mechanical
means, including M.S. pressed butt hinges, 2.5mm thick with mortar
guards, lock strike-plate and shock absorbers as specified and applying
a coat of approved steel primer after pre-treatment of the surface as
directed by Engineer-in-charge:
178 10.14.1 Profile B
10.14.1.1 Fixing with adjustable lugs with split end tail to each jambmeter 173.40 377.70 65493.18
Construction of Govt. ITI at Koratagere in Tumkur District
Ref. DSR 2014
RITES Ltd.,
For and on behalf of DET 39 Signature of the Bidder
SN Description Unit Qty Basic rate Amount in
Rs
PN Item No.
Ref. DSR 2014
9 182 11.5 62 mm thick cement concrete flooring with concrete hardener topping,
under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) and top layer
12mm thick cement hardener consisting of mix 1:2 (1 cement hardener
mix : 2 graded stone aggregate, 6mm nominal size) by volume,
hardening compound mixed @ 2 litre per 50 kg of cement or as per
manufacture’s specifications. This includes cost of cement slurry, but
excluding the cost of nosing of steps etc. complete.Sqm 583.44 588.90 343587.82
10 221 13.60 wall painting with acrylic emulsion paint of approved brand and
manufacture yo give even shade
13.60.1 two or more coats on new work Sqm 1329.83 80.50 107051.32
11 346 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry
brick honey comb shaft with bricks and S.W. drain pipe 100 mm
diameter, 1.8 m long complete as per standard design.
19.32.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Nos 6.00 18309.50 109857.00
12 347 19.35 Providing and laying Non pressure NP-3 class (Medium duty) RCC
pipes including collars/spigot jointed with stiff mixture of cement mortar
in the proportion of 1:2( 1 cement : 2 fine sand) including testing of joints
etc complete
19.35.1 450mm dia RCC pipes metre 10.00 1920.50 19205.00
13 381 24.11 Supplying, assembling, lowering and fixing in vertical position in bore
well, ERW (Electric Resistance Welded) FE 410 plain slotted (having
slot of size 1.6/3.2mm) mild steel threaded and socketed/plain level
ended pipe (type A) of required dia, conforming to IS:8110 of reputed &
approved make, including painted with outside surface
with two coats of anticorrosive bitumestic paint of approved brand and
manufacture, including required hire & labour charges, fittings &
accessories, all complete, for all depths, as per direction of Engineer-in-
charge.
24.11.2 150 mm nominal size dia metre 60.00 1418.65 85119.00
Part B - CPWD SR Items 1416214.90
Add cost index @ 13.33% 148419.32
Part B - CPWD SR Items 1564634.22
Total Quoted Cost of Part 'B' - CPWD SR Items based on Percentage Quoted
Percentage above / below / at par of CPWD-SR-2014 of CPWD to be indicated (including Cost Index) for the above items
Percentage in
figure(+) / (-) / At par
Percentage in
wordsPlus / Minus / At par
Amount in
Figure
(Rupees)
Amount in
Words
(Rupees)
RITES Ltd.,
For and on behalf of DET 40 Signature of the Bidder
SN Description Unit Qty Rate Amount
Part- C Market Rate Items
1 Providing grooves in plastering on walls 2.50 to
4.00 cms wide and to the required depth as per
design and finished in cement mortar (1:3)
including curing etc., complete m 800.00
2 Supplying and fixing ceramic steel green chalk
board, of size 4 feet X 12 feet, surface sheet
imported from belgium having a thickness of
0.49mm, 8mm thickness of MDF and 0.2mm
thickness of GI sheet at the back covered with
powder coated aluminium frame
Nos 11.00
3 Supply, delivery, installation, testing,
commissioning of vertical centrifugal submersible
pump of 6.5HP capable of pumping 335 lpm
against an approximate total head of 40m from all
causes, including providing 4Cx4sqmm 440V flat
core double sheathed waterproof submersible
cable, Star Delta starter, control panel with dry
run preventer, overload protection and backup
protection and capacitor as required, installed
inside a weather proof kiosk with locking
arrangement of approved design near the
borewell, including making necessary electrical
connections from mains to the starter panel and
from starter panel to the pump. Including
providing and fixing gun metal gate valve and non-
return valve of 50mm n.b on the delivery side of
the pump. Submersible pumps may be of Atlanta/
KSB/ Kirloskar/ CALAMA/ Suguna makes.
No 1
Construction of Govt. ITI at Koratagere in Tumkur District
RITES Ltd.,
For and on behalf of DET 41 Signature of the Bidder
SN Description Unit Qty Rate Amount
4 Filling New approved Excavated earth/moorum in
sides of foundation upto plinth in layers not
exceeding 20cm in depth compacting each
deposited layer by ramming after watering with a
lead upto 5km and lift upto 3m including cost of all
labour complete as per the direction of engineer
incharge.
Cum 305.48
Total - Part C - Market Rate Items
The bidder is required to quote his rates in
figure and words for Part C-Market Rate items
Total Amount in Words (Rupees)
RITES Ltd.,
For and on behalf of DET 42 Signature of the Bidder
SN Description of the Item Unit Qty Rate Amount
Part D - Panchayat Raj SR 2012-13
1 Geophysical investigation of site for sinking
borewell for supplying drinking water to the
habitation either through hand pump, MWS or
PWSS by vertical electrical sounding by adopting
Venner or Schlumberger's method, including
reconnaissance survey of Geological formation,
geophysical investigation of existing ground water in
the vicinity indicating the location of site,
recommended depth of casing pipe required to seal
the top unconsolidated formation including an extra
depth of 1m in consolidated formation for proper
seating of casing pipe, depth of drilling required to
cover full depth of aquifer proposed to be tapped,
probable yield and other information required
including transportation of instrument and
accessories to work site, engaging technical
personnel and labour required etc.,
Each BW 1.00 1882.00 1882.00
2 Sinking Bore Well of 165mm dia clear using super
fast hydraulic rig of capacity 250 PSIG & above 900
CMF & above in all strata including over burden
upto 20mtrs fixing of casing pipes, collars and cap
with necessary cutting, threading and welding
including transportation of rig and supporting
vehicle, crew charges and cost of consumables
etc., complete including yield testing at the final
depth with a minimum working of compressor for
one hour (excluding cost of casing pipes, collars,
cap etc.)
0- 50 mtrs RMtr 50.00 306.00 15300.00
50- 100 mtrs RMtr 50.00 400.00 20000.00
100- 150 mtrs RMtr 50.00 445.00 22250.00
3 Yield testing of Borewell at Final depth with a
minimum of 10 hours continuously with the help of
pump testing unit including the cost of
transportation charges, crew charges and cost of
consumables Each BW 1.00 8056.00 8056.00
Part D - Panchayat Raj SR Items 67488.00
Total Quoted Cost of Part 'D' - Panchayat Raj SR 2012-13 Items based on Percentage Quoted
Construction of Govt. ITI at Koratagere in Tumkur District
IN
KPWD Panchayat
Raj SR Bengaluru
2012-13 Item No.
9.4
KPWD Panchayat
Raj SR Bengaluru
2012-13 Item No.
9.1
9.1.1
KPWD Panchayat
Raj SR Bengaluru
2012-13 Item No.
9.9
9.1.2
9.1.3
Amount in
Figure (Rupees)
Amount in
Words (Rupees)
Percentage above / below / at par of KPWD-Panchayat Raj SR Bengaluru 2012-13 to be indicated (including Cost
Index) for the above items
Percentage in figure (+) / (-) / At par
Percentage in words Plus / Minus / At par
RITES Ltd.,
For and on behalf of DET 43 Signature of the Bidder
Part A - KPWD SR 2014 - 15
POINT WIRING
Point wiring using Copper wire without switch.
1 2.3 5 Supplying and wiring adopting loop system in
existing PVC Conduit / casing capping using
1100V grade, COPPER conductor flexible
multistrand FRLS PVC insulated, 2x1.5Sq.mm
Cable confirming to the GTP without switch, the
other end of the wires shall be terminated with
sufficient loose length in a wood/PVC round block
complete for each outlet.
GROUP A
a 2.3.1 5 Short point up to 3 Mtr from tapping point to out let
via switch box Point 11 144.00 1584.00
b 2.3.2 5 Medium point above 3 Mtr up to 6 Mtr from tapping
point to out let via switch box Point 44 215.00 9460.00
c 2.3.3 5 Long point above 6 Mtr up to 10 Mtr from tapping
point to out let via switch box Point 80 334.00 26720.00
d 2.3.4 6 Two outlet in a row, above 3 Mtr up to 6Mtr from
tapping point to out let via switches Point 44 423.00 18612.00
2 3.5 15 Supplying and flush mounting powder coated /
galvanized metal box suitable for mounting
modular switch plates. The box should be firmly
flush mounted after due groove cutting in
Brick/Stone/C.C wall
a 3.5.1 15 1-3 Way Each 52 91.00 4732.00
b 3.5.2 15 4-5 Way Each 126 98.00 12348.00
c 3.5.3 15 6 Way Each 40 121.00 4840.00
d 3.5.4 15 8 Way Each 22 140.00 3080.00
e 3.5.5 16 10-12 Way Each 24 159.00 3816.00
3 3.6 16 Supplying and fixing superior quality modular
switch mounting polycarbonate plate with
necessary supporting back plate with required nos.
of machine screws, bolts nuts etc., complete on
the existing metal/PVC box.
a 3.6.1 16 1 to 3 Module Each 52 109.00 5668.00
b 3.6.2 16 4 Module Each 126 122.00 15372.00
c 3.6.3 16 6 Module Each 40 173.00 6920.00
d 3.6.4 16 8 Module Each 22 200.00 4400.00
e 3.6.6 16 12 Module Each 24 267.00 6408.00
4 3.7 16 Supplying and fixing of modular switch/
Socket/stepped electronic fan regulator/
dimmer/telephone socket etc on existing modular
switch plate as per IS 3854 and IS 1293
GROUP A
a 3.7.1 16 6 Amps one way. Each 260 63.00 16380.00
b 3.7.3 16 6 Amps 3way socket. Each 86 95.00 8170.00
c 3.7.4 16 Stepped Fan Regulator. Each 54 286.00 15444.00
d 3.7.8 16 6 Amps Bell push Each 2 87.00 174.00
e 3.7.9 16 32 Amps DP switch Each 120 164.00 19680.00
Construction of Govt. ITI at Koratagere in Tumkur District - Electrical Works
SN Item No P.No. Description Unit Qty Rate Amount
RITES Ltd.,
For and on behalf of DET 44 Signature of the Bidder
SN Item No P.No. Description Unit Qty Rate Amount
f 3.7.10 16 6/16 Amps universal socket Each 120 147.00 17640.00
g 3.7.11 16 TV / Telephone socket Each 13 82.00 1066.00
h 3.7.12 16 RJ 45 / I.O. outlet Each 32 204.00 6528.00
5 1.12 3 Supplying and Fixing Metal Fan Box with Round
Hook.
No 54 92 4968
1.2 2 Concealed Conduit System
6 Supplying heavy gauge PVC conduit pipe ……mm
dia .......mm thick confirming to IS 2509 with
suitable size bends, metal/PVC junction boxes
adhesive paste etc., and running before concreting
the slab. The conduit should be tied to the
reinforcement rods by using binding wires and
unused ways of junction boxes and pipe ends
should be covered using PVC end enclosures. run
with 18SWG GI fish wire wherever necessary
a 1.2.1 2 19/20 mm dia 2mm thick Mtr 740 43.00 31820.00
b 1.2.2 2 25 mm dia 2mm thick Mtr 4000 57.00 228000.00
c 1.2.3 2 32 mm dia 2.5mm thick Mtr 150 90.00 13500.00
Groove Cutting
7 1.3 2 Supplying heavy gauge PVC Conduit Pipe ----- dia -
- mm thick with suitable size bends, metal junction
boxes adhesive paste etc., by groove cutting in the
wall and fixing by bracing U or J hooks and cement
Plastering up to the wall surface and run with 18
SWG GI fish wire run throughout the conduit
wherever necessary.
a 1.3.1 2 19/20mm dia 2mm thick Mtr 300 56.00 16800.00
b 1.3.2 2 25mm dia 2mm thick Mtr 800 58.00 46400.00
c 1.3.3 2 32mm dia 2.5mm thick Mtr 150 88.00 13200.00
8 1.8 3 Supplying and fixing of PVC casing and capping
on the wall or ceiling using necessary materials
like bends, screws at an interval of 300mm …. Etc
as required.
a 1.8.2 3 25mm Mtr 160 26.00 4160.00
b 1.8.4 3 38mm Mtr 160 39.00 6240.00
c 1.8.5 3 50mm Mtr 160 43.00 6880.00
9 2.5 6 Wiring for lighting/power circuit using one of FRLS
PVC insulated 1100v grade, multistrand Copper
with low conductor resistance single core wire in
open or concealed system of wiring with specified
IS-694:1990 & confirming to GTP of GROUP-A
a 2.5.2 6 1.5 sqmm Mtr 4100 18.60 76260.00
b 2.5.3 6 2.5 sqmm Mtr 3200 29.20 93440.00
c 2.5.4 6 4 sqmm Mtr 5800 42.10 244180.00
d 2.5.5 6 6 sqmm Mtr 530 63.80 33814.00
e 2.5.6 6 10 sqmm Mtr 1250 108.00 135000.00
DISTRIBUTION BOARDS
10 6.17 47 Supplying and fixing regular MCB distribution
boards on wall / wood board / flush mounting
using required clamps, bolts, nuts etc., with
provision for fixing suitable type capacity MCB's
single phase / 3 phase / single door with powder
coated painting. Made out of 14 SWG MS
enclosure.
I - Single Door
RITES Ltd.,
For and on behalf of DET 45 Signature of the Bidder
SN Item No P.No. Description Unit Qty Rate Amount
a 6.17.1 47 4 way SP&N Each 24 706.00 16944.00
( Only for Work shops )
II - Double Door
b 6.17.7 47 4 way TP&N Each 3 2399.00 7197.00
c 6.17.6 47 12 way SP & N Each 3 1622.00 4866.00
11 6.15 46 Supplying and fixing regular MCCB distribution
Panel confirming to IS 8828, on wall / wood board /
flush mounting using required clamps, bolts, nuts
etc., with provision for fixing of suitable type
capacity MCCB's as an incomer for 3 phase
Double door with necessary bus bar completely
wired to use on 440 Volts 3 phase 4 wire powder
coated painting etc., complete with a provision for
fixing of single / three phase suitable capacity
MCCB / MCB's as outgoings confirming to IS
8828.
a 6.15.2 46 8 way Each 6 9095.00 54570.00
12 6.16 47 Supplying and fixing miniature circuit breakers on
existing MCB distribution boards using necessary
fixing materials and 'C' Type curve , indicator
ON/OFF, energy cross-3 with Short circuit
breaking capacity of 10K and complete wiring as
required confirming to IEC 60898.
a 6.16.1 5-32 Amps SP Each 142 418 59356.00
b 6.16.3 5-32 Amps DP Each 3 849 2547.00
c 6.16.5 5-32 Amps TPN Each 24 1547 37128.00
d 6.16.6 40-63 Amps TPN Each 3 1936 5808.00
13 6.18 47 Supplying, fixing and wiring Earth Leakage
Miniature Circuit Breaker [ELMCB] 240/450V up to
300mA sensitivity on existing wood/panel board.
a 6.18.2 47 32-40 Amps 2 pole Each 3 2623.00 7869.00
b 6.18.3 47 32-40 Amps 4 pole Each 3 2936.00 8808.00
14 6.43 50 Supplying and fixing of Metal Socket set of 2pole
and earth plugs and socket for incorporating SP
and TP MCB (Without MCB ). The entire plug and
socket shall b mounted in a Thermoplastic /
powder coated metal box & wired Completely.
A) SP & N
a 6.43.2 b) 20 Amps Each 4 918.00 3672.00
SUPPLY OF FITTING
15 4.7 20 Supplying Box Type Suitable for 28 W T5 Single /
Twin lamp & suspension mounted luminaire &
optical reflector,prewired with HF Electronic
Ballast,push fit type lamp holders & main
connectors. Channel cover shall be made of
CRCA MS Sheet and finishing is done with stove
enamelled white with end caps made of
engineering Plastic.
Group - A
a 4.7.1 1 X 4'-28 Watts Each 116 990.00 114840.00
b 4.7.2 2 X 4'-28 Watts Each 10 1680.00 16800.00
RITES Ltd.,
For and on behalf of DET 46 Signature of the Bidder
SN Item No P.No. Description Unit Qty Rate Amount
16 4.23 24 Supplying CFL mirror light fitting with 1x11W
CFL lamp, choke, Perspex cover and completely
wired for use on 230V 50Hz AC supply.
Each 2 648.00 1296.00
17 4.17 22 Supplying High pressure Metal halide street
light luminary suitable for use with high pressure
metal halide lamp with integrated control gear &
grey color powder coated. The fitting shall be non
corrosive pressure die cast aluminum housing with
high purity anodized aluminium reflector with
EPDM Gaskets suitable for Outer Dia of pole
40mm - 60mm. Cable Entry through a cable gland
with toggle clips. IP65 Protection for both optical &
Electrical Compartment. Bottom cover may be with
Poly carbonate/tempered/ toughened glass.
Luminaire efficiency should be >60 % & ambient
temperature > 35 deg C. High Intensity Discharge
Electro Magnetic Ballast with Copper winding of
Orthocyclic winding coil. Class H insulated dual
coated copper wire. Compliance to IEC 61347-2-9
Safety & IEC 60923 - Performance. Winding
Temperature for HID Ballast Tw = 130 deg C &
temperature rise ?T = 70 deg C. Luminaire shall
be suitable to operate on 230/250 Volts 50 Hz AC
supply finish including wiring, ignitor, condenser.
SS Toggles for opening front hingeable glass.
a 4.17.2 23 150Watts Each 1 6300 6300.00
18 9.3 78 Supplying capacitor type ceiling fan complete
with down rod blades, shackle, canopies etc., for
operation on 230 volts, 50 cycles. Single phase
AC supply conforming to ISS-374-1979 and with
double ball bearing system.
9.3.1 48" Sweep (1200mm)
a 9.3.1.1 78 Regular model Each 54 2376.00 128304.00
19 9.2 78 Supplying of 1440rpm heavy duty exhaust fan
with bracket blades suitable to operate on 230V
50Hz, AC Supply complete.
a 9.2.1 78 12" Sweep (300mm) Each 17 3654.00 62118.00
20 4.2 20 Supplying and fixing PBBC/Bakelite straight or
slant batten holder and wiring with 60 W / 230
volts lamps. Each 12 88.00 1056.00
21 16.1 104 Supplying and fixing one of 230 volts bell or
buzzer and a flush type bell push with gang box
fixed on necessary wooden or rawl plugs using NF
screws. Each 2 145 290.00
FIXING CHARGES
22.0 17.2 108 Supplying and Fixing........mm dia class A GI pipe
bracket up to 2.7 meters long terminated with a
reducing collar of 40x25mm to which extra pipe of
175mm length is fixed for fixing MV/SV/MH/FTL
street light fitting of all capacities on
rail/RCC/wall/tubular pole, using suitable clamps,
bolts ,nuts and wiring using suitable capacity wires
etc complete.
RITES Ltd.,
For and on behalf of DET 47 Signature of the Bidder
SN Item No P.No. Description Unit Qty Rate Amount
a 17.2.2 108 Using 32mm dia G.I.pipe Each 1 1140.00 1140.00
23 17.7 108 Fixing all types and all capacities of fluorescent /
false ceiling / spot light / CFL / LED fittings
indoor on the wall / ceiling/ rafters / girders
using 23/0.0076” twin twisted PVC insulated
wires, required Nos of round blocks and clamps
a 17.7.1 108 On wall / ceiling / Rafter / Girders Each 128 98.00 12544.00
24 17.8 109 Fixing a ceiling / Wall mounting fan of all
capacities and all types to the existing 'S' hook
with fan regulator to the existing board together
with supplying and fixing 5 amps. ceiling rose,
necessary length of 23 / 0.0076 inch PVC
insulated twin twisted copper wire and wiring.
Each 54 139.00 7506.00
25 17.12 109 Fixing one exhaust fan in the nitch already left in
the wall with bolts and nuts and 5 amps. Ceiling
rose with sufficient length of 23 / 0.0076 inch PVC
insulated twin core wire. Each 17 412 7004.00
26 17.5 108 Fixing halogen/metal hallide / SVL / IL / LED
floodlight fitting over existing pole / wall ceiling
including clamps, bolts, nuts and wiring using
suitable capacity wires. Each 1 176.00 176.00
27 11.1 85 Supplying and drawing UTP-CAT 6E LAN cable.
Mt. 520 23.00 11960.00
28 11.2 85 Supplying and drawing PVC flexible one pair
telephone unarmoured tinned copper cable.
a 11.2.2 85 2 Pair mtr 160 13 2080.00
29 1.4 2 Supplying and fixing sheet metal box made out of
18 SWG sheet metal with necessary holes for
cable/conduit entry as required with one coat of
primer of approved make etc.
a 1.4.7 2 200 x 200 x 65 mm Each 4 157.00 628.00
30 7.4 55 Supplying of 1.1 KV LT UG cable having
aluminium conductor PVC insulated, extruded
inner sheated , galvanized , steel strip (except 2C
X 10 Sq.mm wire armoured) confirming to IS -
3975 : 1990 (No. of strip indicated in GTP) &
extruded PVC outer sheated armoured cable with
specified IS - 1554 Part - 1:1988 & confirming to
GTP of Group - A.
7.4.4 55 4 core 16 sqmm Mtr 320 140.40 44928.00
31 7.8 61 Labour charges for laying of 1.1 KV class UG
cable in existing trench GI pipe / stoneware pipe /
on wall / on pole as required.
In existing trench / duct.
7.8.1 61 6 sqmm to 16 sqmm Mtr 320 10.80 3456.00
.
32 7.9 61 Digging of trench of 0.6m deep X 0.50 mtr wide
refilling the trench to the required ground level and
consolidating etc., complete. (As per Civil SR
KSRB I - 2, P - 7)
RITES Ltd.,
For and on behalf of DET 48 Signature of the Bidder
SN Item No P.No. Description Unit Qty Rate Amount
7.9.2 62 In soil (hard) Mtr 120 106.00 12720.00
33 7.10 62 Providing and filling sand in excavated trench to
cover already laid UG cable to adepth of 150 mm
all - round the cable. Mtr 120 103.00 12360.00
34 7.14 62 Supplying and fixing of heavy duty cable glands
suitable for UG cable of 1.1 KV class (metal only)
7.14.2 62 25 mm dia Each 14 86.00 1204.00
35 7.21 64 Supplying tinned copper lugs and crimping and
wiring to terminal point for wire of the following
sizes.
7.21.6 64 16 sqmm Each 56 11.31 633.36
EARTHING
36 7.2 55 Supplying fixing and wiring earth electrode for
grounding of lifts, transformers, DG sets etc.
using 40mm dia 2.9mm thick 2.5 mtr long GI pipe
with GI funnel with mesh and suitable size reducer
fixed on the top of the earth electrode. The funnel
should be enclosed in a CC chamber of
400x400x400mm with a cast iron cover. The earth
electrode shall have staggered holes of 12mm dia
and the electrode should be covered 150mm
alround with alternate layers of salt and charcoal
from the bottom of the CC chamber. The
connection from the electrode is to be established
through GI strip using GI bolts and nuts.
Each 3 4317.00 12951.00
37 7.3 55 Supplying and running of GI/Copper strips for
grounding connections, using necessary fixing
materials as required.
GI strip
a 7.3.1 55 25 x 3 mm Mtr 60 77.00 4620.00
c 7.3.10 55 600 x 600 x 3 mm copper plate Each 1 7148.00 7148.00
38 7.22 64 Supplying and running GI/Copper conductor for
grounding and (along with other wires in conduit
system of wiring) using necessary suitable size
clamps, nails, guttas/spacers etc.,
Copper Wire.
b 7.22.6 64 8 SWG Mtr 60 107.70 6462.00
RITES Ltd.,
For and on behalf of DET 49 Signature of the Bidder
SN Item No P.No. Description Unit Qty Rate Amount
39 7.12 62 Supplying and fixing of class A (medium duty) GI
pipe of wall thickness not less than 3.25mm on
pole/wall/drain crossing with necessary clamping
arrangements for UG cable of 1.1 KV.
a 7.12.2 62 50mm Mtr 20 391.00 7820.00
Part A - KPWD SR Items - Electrical works 1860813.36
Total Quoted Cost of Electrical Items based on Percentage Quoted
Amount in Figure
(Rupees)
Amount in Words
(Rupees)
Percentage in
words
Plus / Minus / At par
Percentage above / below / at par of KPWD-SR 2014-15 for Electrical Works to be indicated for all the above items
Percentage in
figure
(+) / (-) / At par
RITES Ltd.,
For and on behalf of DET 50 Signature of the Bidder
SN Description of Work Unit Qty Rate Amount
Part B - Market Rate Items
Sub MV Panel
1 Supply, installation, testing and commissioning of LT
Sub MV Panel fabricated out of 16 SWG sheet steel
metal floor mounting type with all normal practice like
derusting, degreasing, phosphating, powder coated to
the approved make as per specification, comprisiing of
the following:-
Incomer
I. 125 A 3P MCCB 35 KA breaking capacity - 1No.
ii. 250A Al Bus bar (RYBN)
iii. RYB phase indication lamps - 1set
iv.0-500 V Voltmeter with selector switch -1no
v.0 - 300 A Ammeter With selector switch-1no
Outgoing
iii. 63 A 4Pole 16 KA MCCB - 12 nos.
iii. 40 A 4Pole MCB - 3 nos. Nos 1.00
2 Supplying and fixing Moulded Case Circuit Breaker
(MCCB) over the existing wood / panel board using
necessary screws, bolts, nuts and wiring complete.
Protection of Overload and Short circuit with thermal
Magnetic / Micro processor release and Earth Fault as
per IS - 13947. (Icu = Ics)
63 Amps 16 KA (Three Pole) Each 6.00
Part B - Market rate Items - Electrical works
The bidder is required to quote his rates in figure
and words for Part B-Non SR items of Electrical
works
Construction of Govt. ITI at Koratagere in Tumkur District - Electrical Works
Total Amount in Words (Rupees)
RITES Ltd.,
For and on behal of DET 51 Signature of the Bidder
top related