Chapter 7 THE COST OF QUALITY AND ACCOUNTING FOR PRODUCTION LOSSES Learning 9, 10 F2F
Post on 30-Dec-2015
177 Views
Preview:
DESCRIPTION
Transcript
Chapter 7
THE COST OF QUALITY AND ACCOUNTING FOR PRODUCTION LOSSES
Learning 9, 10 F2F
Matakuliah : COST ACCOUNTINGTahun : 2009
Bina Nusantara University 3
The Cost of QualityThe cost of quality is not only the cost of obtaining quality but also the cost incurred from a lack of quality.
Types of quality costs:1.Prevention costs, are the costs incurred to prevent product failure. For example: costs of implementing and maintaining such systems.2.Appraisal costs, are the costs incurred to detect product failure. For example: cost of inspecting and testing materials. 3.Failure costs, are the costs incurred when a product fails; they can occur internally or externally.
• Internally failure costs, arhas been soldhas been sold, such as the cost of warrantye those that occur during the production process, such as the costs of scrap, spoilage, rework.
• Externally failure costs, are those that occur after the product has been sold, such as the cost of warranty repairs and replacements, the cost of handling customer complaints, the cost of lost sales.
Bina Nusantara University 4
To eliminate poor quality, world-class producers adopt a
total quality management philosophy.
Total Quality Management (TQM) is a company wide
approach to quality improvement that seeks to improve
quality in all processes and activities.
Bina Nusantara University 5
There is no one quick way to achieve quality. Quality improvement must be a continuous process .
Continuous quality improvement requires the constant effort of every one in the company - both management
and labor - working together, and that while quality will
improve over time, the process of continual improvement never ends and never becomes easier.
Bina Nusantara University 6
To monitor successfully the cost of quality and evaluate
improvements, management accountants must be able to
measure the cost of quality.
Reporting quality costs also provides direction by indicating
opportunities for substantial improvement.
Bina Nusantara University 7
Accounting for Production Losses in a Job Order Cost System
Production losses in job order cost system include the cost
of materials scrap, spoiled goods, and reworking defective
goods.
Bina Nusantara University 8
Accounting for Scrap
Scrap includes:1. The fillings or trimmings remaining after
processing materials.2. Defective materials that cannot be used or
returned to the vendor.3. Broken parts resulting from employee or machine
failures
Bina Nusantara University 9
Accounting for Spoiled Goods
Spoiled goods are not correctable either because technically it is not possible to correct them or
because it is not economical to correct them.
Bina Nusantara University 10
Accounting for Spoiled Goods
Spoilage can be caused by an act of the customer, such as a change in specifications after production is begun or imposition of unusually close production tolerances.
Spoilage also can be caused by an internal failure, such as an employee error or a badly worn tool.
The accounting treatment for spoiled goods depends on which of these two types of cause is present.
Bina Nusantara University 11
Accounting for Rework
Rework is the process of correcting defective goods. Rework can result from either an act of the
customer or an internal failure.
The accounting treatment of rework cost depends on the
cause of the rwork.
Bina Nusantara University 12
Accounting for Production Losses in a Process Cost System
Production losses in a process cost system include scrap, spoilage, and rework.
Normally the cost of rework should be charge to Factory Overhead Control rather than to Work in Process,
because rework in process cost system usually results from
internal failure rather than from a customer requirements.
Bina Nusantara University 13
Accounting for Production Losses in a Process Cost System
In a process cost system, the spoilage cost is determined
on the basis of equivalent units.
As a result, the total number of equivalent units would include not only the number transferred out and the
number in ending inventory but also the number in the spoiled
units.
Bina Nusantara University 14
Accounting for Production Losses in a Process Cost System
Normal Production Shrinkage
In some production processes, physical units are lost through evaporation or some other natural process that is not an internal quality failure.
The loss or shrinkage should be monitored to ensure that in event an internal failure does occur, it will be detected and, if possible, corrected.
Bina Nusantara University 15
Nevertheless, such losses are not usually assigned cost on
the grounds that such cost assignment is not practical.
Instead, the total cost is absorbed by the good units the
remain.
Bina Nusantara University 16
top related