Certificate of Approval - Atlas Copco · ISO 14001 - 1 January 2005 ISO 9001 - 9 December 2002 OHSAS 18001 - 11 September 2007 Certificate identity number: 10242112 Certificate of
Post on 04-Jul-2020
2 Views
Preview:
Transcript
Current issue date: 30 January 2020 Original approval(s): Expiry date: 11 March 2021 ISO 14001 - 1 January 2005
ISO 9001 - 9 December 2002 OHSAS 18001 - 11 September 2007
Certificate identity number: 10242112
Certificate of Approval
P.G. Cornelissen
Area Manager North Europe
Issued by: Lloyd's Register EMEA
for and on behalf of: Lloyd's Register Quality Assurance Limited
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 83
This is to certify that the Management System of:
Atlas Copco Airpower NV
Business Area Compressor Technique
Boomsesteenweg 957, 2610 Wilrijk, Belgium
has been approved by Lloyd's Register to the following standards:
ISO 14001:2015, ISO 9001:2015, OHSAS 18001:2007
Approval number(s): ISO 14001 – 0019527, ISO 9001 – 0019526, OHSAS 18001 – 0019525
This certificate is valid only in association with the certificate schedule bearing the same number on which the locations applicable to this approval are listed.
The scope of this approval is applicable to:
ISO 14001:2015
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco brand as well as other Brands from the Brand portfolio.
ISO 9001:2015
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco brand as well as other Brands from the Brand portfolio.
OHSAS 18001:2007
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco brand as well as other Brands from the Brand portfolio.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 2 of 83
Location Activities
ACA - CC - Atlas Copco Canada Inc. Atlas Copco Compressors Canada Head office
5060 Rue Levy, Ville St. Laurent, Quebec,
H4R 2P1, Canada
ISO 14001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
ISO 9001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
OHSAS 18001:2007
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
ACA - CC - Atlas Copco Canada Inc. Branch Office Air Repair
675 Malenfant Boulevard, Dieppe New Brunswick,
E1A 5T8, Canada
ISO 14001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
ISO 9001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
OHSAS 18001:2007
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 3 of 83
Location Activities
ACA - CC - Atlas Copco Canada Inc. Branch Office British Colombia (Vancouver)
Unit 4, 19840 - 96th Avenue, Langley, British Colombia, V1M3B9, Canada
ISO 14001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
ISO 9001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
OHSAS 18001:2007
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
ACA - CC - Atlas Copco Canada Inc. Calgary Sales Office
Suite 276, 2880 - 45th Ave, SE Calgary, AB,
T2B 3M1, Canada
ISO 14001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
ISO 9001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
OHSAS 18001:2007
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 4 of 83
Location Activities
ACA - CC - Atlas Copco Canada Inc. Edmonton Customer Service Center
17810 - 114 Avenue, Edmonton, Alberta, T5S 2L8,
Canada
ISO 14001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
ISO 9001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
OHSAS 18001:2007
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
ACA - CC - Atlas Copco Canada Inc. Toronto Customer Service Center (Ontario Branch)
Unit 13, 2900 Argentia Road, Mississauga, Ontario, L5N 7X9, Canada
ISO 14001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
ISO 9001:2015
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
OHSAS 18001:2007
Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process compressors and generators.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 5 of 83
Location Activities
AEA - CC - Atlas Copco Gas and Process Service Workshop
Jebel Ali Free Zone Area, South Blue Shade, Warehouse No. FZS 1 AH02, Dubai, United Arab Emirates
ISO 14001:2015
Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment equipment, generators sets, vacuum pumps, and specially built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as other Brands from the Brand Portfolio.
ISO 9001:2015
Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment equipment, generators sets, vacuum pumps, and specially built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as other Brands from the Brand Portfolio.
OHSAS 18001:2007
Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment equipment, generators sets, vacuum pumps, and specially built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as other Brands from the Brand Portfolio.
AEA - CC - Atlas Copco Services Middle East OMC
Gold and Diamond Park, Building No.2, 1st Floor, Office No. 2121, Sheikh Zayed Road, Dubai,
United Arab Emirates
ISO 14001:2015
Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment equipment, generators sets, vacuum pumps, and specially built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as other Brands from the Brand Portfolio.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 6 of 83
Location Activities
ISO 9001:2015
Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment equipment, generators sets, vacuum pumps, and specially built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as other Brands from the Brand Portfolio.
OHSAS 18001:2007
Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment equipment, generators sets, vacuum pumps, and specially built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as other Brands from the Brand Portfolio.
AFR - CC - Atlas Copco Compresseurs S.A.S. Atlas Copco France SAS
2 Avenue de l'Eguillette, ZI du Vert Galant,
95310 Saint-Ouen-l'Aumône, France
ISO 14001:2015
Marketing, sales, design, distribution, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, assemblies and related products and services, under Atlas Copco Brand.
ISO 9001:2015
Marketing, sales, design, distribution, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, assemblies and related products and services, under Atlas Copco Brand.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 7 of 83
Location Activities
OHSAS 18001:2007
Marketing, sales, design, distribution, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, assemblies and related products and services, under Atlas Copco Brand.
APA - PC - Atlas Copco Airpower N.V. Airtec
Boomsesteenweg 957, 2610 Wilrijk, Belgium
ISO 14001:2015
Marketing, design, sales, manufacturing, installation and service of compressors, air treatment equipment, generator sets and related products and services.
ISO 9001:2015
Marketing, design, sales, manufacturing, installation and service of compressors, air treatment equipment, generator sets and related products and services.
OHSAS 18001:2007
Marketing, design, sales, manufacturing, installation and service of compressors, air treatment equipment, generator sets and related products and services.
APF - PC - Atlas Copco Airpower Oil-free Air
Boomsesteenweg 957, 2610 Wilrijk, Belgium
ISO 14001:2015
Marketing, design, sale, manufacturing, installation and service of compressors, air treatment equipment, generator sets and related products and services.
ISO 9001:2015
Marketing, design, sale, manufacturing, installation and service of compressors, air treatment equipment, generator sets and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 8 of 83
Location Activities
OHSAS 18001:2007
Marketing, design, sale, manufacturing, installation and service of compressors, air treatment equipment, generator sets and related products and services.
API - PC - Atlas Copco Airpower Industrial Air
Boomsesteenweg 957, 2610 Wilrijk, Belgium
ISO 14001:2015
Marketing, design, sales, manufacturing, installation and service of compressors, air treatment equipment, generator sets and related products and services.
ISO 9001:2015
Marketing, design, sales, manufacturing, installation and service of compressors, air treatment equipment, generator sets and related products and services.
OHSAS 18001:2007
Marketing, design, sales, manufacturing, installation and service of compressors, air treatment equipment, generator sets and related products and services.
APS - DC - Atlas Copco Airpower Service Center
Boomsesteenweg 957, 2610 Wilrijk, Belgium
ISO 14001:2015
Distribution of air compressors, air treatment equipment, generator sets and related accessories and spares.
ISO 9001:2015
Distribution of air compressors, air treatment equipment, generator sets and related accessories and spares.
OHSAS 18001:2007
Distribution of air compressors, air treatment equipment, generator sets and related accessories and spares.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 9 of 83
Location Activities
ARG - CC - Atlas Copco Argentina S.A.C.I.
Estados Unidos 5335, B1667JHQ Malvinas Argentinas, Buenos Aires, Argentina
ISO 14001:2015
Marketing of compressors, quality air systems, service and spare parts supply.
ISO 9001:2015
Marketing of compressors, quality air systems, service and spare parts supply.
OHSAS 18001:2007
Marketing of compressors, quality air systems, service and spare parts supply.
ASA - CC - Atlas Copco GmbH Kompressoren & Drucklufttechnik
Office Park 1, Top B02, 1300 Flughafen Wien,
Austria
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
AUA - CC - Atlas Copco Compressors Australia
3 Bessemer Street, Blacktown, 2148, Australia
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 10 of 83
Location Activities
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
AUA - CC - Atlas Copco Compressors Australia Brisbane Branch
25 Bluestone Circuit, Seventeen Mile Rocks, Brisbane, Queensland, 4073, Australia
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
AUA - CC - Atlas Copco Compressors Australia Melbourne Branch
1480 Sydney Rd, 3061 Campbellfield, Victoria,
Australia
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 11 of 83
Location Activities
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
AUA - CC - Atlas Copco Compressors Australia Perth Branch
535 Abernethy Road, Kewdale, Western Australia,
6105, Australia
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and separation equipment, accessories and assemblies.
BDA - CC - Atlas Copco Bangladesh Limited Compressor Technique Service Division
Impetus, level #6, 242/B, Tejgaon-Gulshan Link Road, Tejgaon I/A, Dhaka - 1208, Bangladesh
ISO 14001:2015
Sales and service of reciprocating gas, oil injected and oil free compressors, dryers and air line accessories.
ISO 9001:2015
Sales and service of reciprocating gas, oil injected and oil free compressors, dryers and air line accessories.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 12 of 83
Location Activities
OHSAS 18001:2007
Sales and service of reciprocating gas, oil injected and oil free compressors, dryers and air line accessories.
BEL - CC - Atlas Copco Belgium N.V.
Brusselsesteenweg 346, 3090 Overijse, Belgium
ISO 14001:2015
Marketing, sales and service of air/gas compressors, generator sets and related products and services.
ISO 9001:2015
Marketing, sales and service of air/gas compressors, generator sets and related products and services.
OHSAS 18001:2007
Marketing, sales and service of air/gas compressors, generator sets and related products and services.
BEN - CC - OriginAir Europe
Ten Bergstraat 4, 2830 Willebroek, Belgium
ISO 14001:2015
(Re)manufacturing, installation and service of compressors, air treatment equipment and related products and services.
ISO 9001:2015
(Re)manufacturing, installation and service of compressors, air treatment equipment and related products and services.
OHSAS 18001:2007
(Re)manufacturing, installation and service of compressors, air treatment equipment and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 13 of 83
Location Activities
BQD - PC - Product Company Brazil
Alameda Araguaia 2700, Tamboré, Barueri - São Paulo, 06455-000, Brazil
ISO 14001:2015
Marketing, design, manufacturing, assembling of air compressors, blowers, generator sets and related products.
ISO 9001:2015
Marketing, design, manufacturing, assembling of air compressors, blowers, generator sets and related products.
OHSAS 18001:2007
Marketing, design, manufacturing, assembling of air compressors, blowers, generator sets and related products.
BRD - CC - Atlas Copco Brasil Ltda Compressor Technique - Head Office
Alameda Araguaia, 2700, Tamboré, Barueri - São Paulo, 06455-000, Brazil
ISO 14001:2015
Marketing, sales, distribution, service of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment and related products.
ISO 9001:2015
Marketing, sales, distribution, service of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment and related products.
OHSAS 18001:2007
Marketing, sales, distribution, service of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment and related products.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 14 of 83
Location Activities
BRD - CC - Belo Horizonte Branch, Atlas Copco Brasil Ltda
Avenida Heráclito Mourão de Miranda, 1500, Bairro Castelo, Belo Horizonte - MG, 31330-142, Brazil
ISO 9001:2015
Sales of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment and related products.
BRD - CC - Brazil Service Center (BSC) São Paulo Atlas Copco Brasil Ltda
Avenida Piraíba 202, Tamboré, Barueri - SP (São Paulo), 06460-121, Brazil
ISO 14001:2015
Distribution of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment, related products and spare parts.
ISO 9001:2015
Distribution of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment, related products and spare parts.
OHSAS 18001:2007
Distribution of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment, related products and spare parts.
BRD - CC - Curitiba Branch, Atlas Copco Brasil Ltda
Antonio Kaminski street 73, Orleans, Curitiba - PR, 81200-402, Brazil
ISO 9001:2015
Sales of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment and related products.
BRD - CC - Porto Alegre Branch, Atlas Copco Brasil Ltda
Joaquim Silveira street, 1038, Porto Alegre, São Sebastião - RS, 91060-320, Brazil
ISO 9001:2015
Sales of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment and related products.
BRD - CC - Rio de Janeiro Branch, Atlas Copco Brasil Ltda
Avenida da Américas, 1155 – Sala 505, 22631-000 Barra da Tijuca, Rio de Janeiro - RJ, Brazil
ISO 9001:2015
Sales of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment and related products.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 15 of 83
Location Activities
CHA - CC - Atlas Copco (Schweiz) AG Kompressoren und Druckluftaufbereitung
Büetigenstrasse 80, 2557 Studen / Biel,
Switzerland
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
CJE - CC - Liuzhou Tech Machinery Co., Ltd Liuzhou Customer Center
B-22-1 Yanghe New Industrial Zone, Liuzhou,
Guangxi 545006, China
ISO 14001:2015
Marketing, Sales and Servicing of air compressors, filters and dryers.
ISO 9001:2015
Marketing, Sales and Servicing of air compressors, filters and dryers.
OHSAS 18001:2007
Marketing, Sales and Servicing of air compressors, filters and dryers.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 16 of 83
Location Activities
CLK - CC - Atlas Copco Chilena S.P.A. Antofagasta Branch
Pedro Aguirre Cerda N° 15430, Parque Ind. La Portada Antofagasta, Chile
ISO 14001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
ISO 9001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
OHSAS 18001:2007
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
CLK - CC - Atlas Copco Chilena S.P.A. Calama Branch
Calle el litio, Sitio 1, Manzana G, Puerto Seco Calama, Chile
ISO 14001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
ISO 9001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 17 of 83
Location Activities
OHSAS 18001:2007
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
CLK - CC - Atlas Copco Chilena S.P.A. Concepción Branch
Calle 3 N° 1954, Parque Industrial Ejército Concepción, Chile
ISO 14001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
ISO 9001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
OHSAS 18001:2007
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
CLK - CC - Atlas Copco Chilena S.P.A. Copiapó Branch
Panamericana Norte K 813, Bodega 3, Local 2 Copiapó, Chile
ISO 14001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 18 of 83
Location Activities
ISO 9001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
OHSAS 18001:2007
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
CLK - CC - Atlas Copco Chilena S.P.A. Iquique Branch
Avenida Sotomayor 2141 Iquiqui, Chile
ISO 14001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
ISO 9001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
OHSAS 18001:2007
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 19 of 83
Location Activities
CLK - CC - Atlas Copco S.P.A. Head Office Aerea de Negocio Compressores
Panamericana Norte Nr. 5001 Conchalí, Santiago,
Chile
ISO 14001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
ISO 9001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
OHSAS 18001:2007
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
CNO - PC - Wuxi Pneumatech Air/Gas Purity Equipment Co Ltd.
No.15-2 ChangJiang South Road, New District, Wuxi, Jiangsu 214028, China
ISO 14001:2015
Design, manufacture and service of refrigerated compressed air dryers, regenerative compressed air dryers and compressed air filters.
ISO 9001:2015
Design, manufacture and service of refrigerated compressed air dryers, regenerative compressed air dryers and compressed air filters.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 20 of 83
Location Activities
OHSAS 18001:2007
Design, manufacture and service of refrigerated compressed air dryers, regenerative compressed air dryers and compressed air filters.
COF - PC - Atlas Copco (Shanghai) Process Equipment Co., Ltd.
No. 899 Cenglin Road, Lingang New City, Pudong New Area, Shanghai 201306, China
ISO 14001:2015
Research and development, manufacture and assembling of single stage and multiple stages gear type turbo compressor, direct drive turbo compressor, expander, screw compressor and ancillary facilities; sales of self-manufactured products; Import, export, wholesale and commission agency of the above-mentioned similar commodities and related parts and components (except auctions); offering relevant after-sales services, maintenance, test and debugging, sales of lube oil and technical consultation.
ISO 9001:2015
Research and development, manufacture and assembling of single stage and multiple stages gear type turbo compressor, direct drive turbo compressor, expander, screw compressor and ancillary facilities; sales of self-manufactured products; Import, export, wholesale and commission agency of the above-mentioned similar commodities and related parts and components (except auctions); offering relevant after-sales services, maintenance, test and debugging, sales of lube oil and technical consultation.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 21 of 83
Location Activities
OHSAS 18001:2007
Research and development, manufacture and assembling of single stage and multiple stages gear type turbo compressor, direct drive turbo compressor, expander, screw compressor and ancillary facilities; sales of self-manufactured products; Import, export, wholesale and commission agency of the above-mentioned similar commodities and related parts and components (except auctions); offering relevant after-sales services, maintenance, test and debugging, sales of lube oil and technical consultation.
COV - PC - Liuzhou Tech Machinery Co., Ltd
B-22-1 Yanghe New Industrial Zone 545006 Liuzhou, Guangxi, China
ISO 14001:2015
Design, manufacture, assembling, sales and servicing of air compressors and filters. Sales and servicing of dryers.
ISO 9001:2015
Design, manufacture, assembling, sales and servicing of air compressors and filters. Sales and servicing of dryers.
OHSAS 18001:2007
Design, manufacture, assembling, sales and servicing of air compressors and filters. Sales and servicing of dryers.
COX - PC - Pan-Asia Gas Technologies (Wuxi) Co., Ltd
No. 15-2 ChangJiang South Road, New District, Wuxi, Jiangsu 214028, China
ISO 14001:2015
Design, manufacture and after-sales service of air compressor.
ISO 9001:2015
Design, manufacture and after-sales service of air compressor.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 22 of 83
Location Activities
OHSAS 18001:2007
Design, manufacture and after-sales service of air compressor.
CPR - CC - Atlas Copco Compressor AB
Sickla Industriväg 19, 131 82 Nacka, Sweden
ISO 14001:2015
Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket products.
ISO 9001:2015
Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket products.
OHSAS 18001:2007
Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket products.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas Copco China / Hong Kong Ltd. Shanghai Regional Office
Floor 12, Building 36, No. 1888, New Jinqiao Road, Shanghai 201206, China
ISO 14001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
ISO 9001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 23 of 83
Location Activities
OHSAS 18001:2007
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas Copco China / Hong Kong Ltd. Beijing Regional Office
Rm. 601 6F, Silver Tower, 2#, East 3 Ring N. Rd, Chaoyang District 100027, Beijing, China
ISO 14001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
ISO 9001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
OHSAS 18001:2007
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas Copco China / Hong Kong Ltd. Shenyang Regional Office
Door 2, 3rd Hunnan Road, Hunnan New District, Shenyang, Liaoning Province, China
ISO 14001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
ISO 9001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 24 of 83
Location Activities
OHSAS 18001:2007
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas Copco China / Hong Kong Ltd. Guangzhou Regional Office
No 65, GuangPu xi Road, Guangzhou, Guangdong Province, China
ISO 14001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
ISO 9001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
OHSAS 18001:2007
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas Copco China / Hong Kong Ltd. Xian Regional Office
Room 4815, Shang Yuan Road, Cao Tan Zone, Economic-Technological Development Area, Xian, Shanxi Province, China
ISO 14001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
ISO 9001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 25 of 83
Location Activities
OHSAS 18001:2007
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas Copco China / Hong Kong Ltd. Chongqing Regional Office
Room 2402, Huarun Building, Xie Jia Wan Zheng Street, Jiulong Po District 400050, Chongqing, China
ISO 14001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
ISO 9001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
OHSAS 18001:2007
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas Copco China / Hong Kong Ltd. Hong Kong Regional Office
Unit 1018, Tower 2, Grand Central Plaza, No. 138 Shatin Rural Committee Road, Shatin, NT, Hong Kong,
SAR, China
ISO 14001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
ISO 9001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 26 of 83
Location Activities
OHSAS 18001:2007
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas Copco China / Hong Kong Ltd. Head Office
Floor 12, Building 36, No. 1888, New Jinqiao Road, Shanghai 201206, China
ISO 14001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
ISO 9001:2015
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
OHSAS 18001:2007
Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable compressors and generators.
CRP - PC - Atlas Copco Crépelle SAS
2, Place Guy de Dampierre, 59008 Lille Cedex,
France
ISO 14001:2015
Marketing, design, manufacturing, assembling, service of air / gas compressors, air / gas treatment equipment, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
ISO 9001:2015
Marketing, design, manufacturing, assembling, service of air / gas compressors, air / gas treatment equipment, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 27 of 83
Location Activities
OHSAS 18001:2007
Marketing, design, manufacturing, assembling, service of air / gas compressors, air / gas treatment equipment, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
CZI - CC - Atlas Copco s.r.o. Atlas Copco Central Region
Prumyslová 1428/10, 10200 Hostivar, Prague,
Czech Republic
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
DFE - CC - ALUP Kompressoren GmbH
Ferdinand-Lassalle-Strasse 43, 72770 Reutlingen, Germany
ISO 9001:2015
Planning and sales of compressors, compressed air stations and accessories as well as sales of service products and services for compressed air.
DFS - CC - Atlas Copco Kompressoren und Drucklufttechnik GmbH
Langemarckstrasse 35, 45141 Essen, Germany
ISO 14001:2015
Planning and sales of compressors, compressed air stations and accessories as well as sales of service products and services for compressed air.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 28 of 83
Location Activities
ISO 9001:2015
Planning and sales of compressors, compressed air stations and accessories as well as sales of service products and services for compressed air.
OHSAS 18001:2007
Planning and sales of compressors, compressed air stations and accessories as well as sales of service products and services for compressed air.
DKA - CC - Atlas Copco Kompressorteknik A/S
Djursvang 5B, 2620 Albertslund, Denmark
ISO 14001:2015
Sales and service of compressors, generator sets, refrigerant dryers and related accessories and aftermarket products.
ISO 9001:2015
Sales and service of compressors, generator sets, refrigerant dryers and related accessories and aftermarket products.
OHSAS 18001:2007
Sales and service of compressors, generator sets, refrigerant dryers and related accessories and aftermarket products.
EGY - Atlas Copco Equipment S.A.E. CT Division
1st industrial zone, Part 7, Block No 13024, El Obour, Cairo, 11828, Egypt
ISO 14001:2015
Operations (marketing and sales), commissioning, after-sales services, maintenance and repairing of Atlas Copco equipment belonging to CT (IAT, OFA, CTS) & CR (APW, CRS).
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 29 of 83
Location Activities
ISO 9001:2015
Operations (marketing and sales), commissioning, after-sales services, maintenance and repairing of Atlas Copco equipment belonging to CT (IAT, OFA, CTS) & CR (APW, CRS).
OHSAS 18001:2007
Operations (marketing and sales), commissioning, after-sales services, maintenance and repairing of Atlas Copco equipment belonging to CT (IAT, OFA, CTS) & CR (APW, CRS).
ENS - PC - Atlas Copco Energas GmbH
Schlehenweg 15, 50999 Köln, Germany
ISO 14001:2015
Design, manufacture, in-house and field service of turbo machinery.
ISO 9001:2015
Design, manufacture, in-house and field service of turbo machinery.
OHSAS 18001:2007
Design, manufacture, in-house and field service of turbo machinery.
ESA - CC - Atlas Copco S.A.E. - Divisíon Compresores
Avenida De José Gárate 3, Pol. Ind. de Coslada, 28823 Coslada, Madrid, Spain
ISO 14001:2015
Marketing, sales and service of air/gas compressors, air/gas treatment equipment, generator sets, and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 30 of 83
Location Activities
ISO 9001:2015
Marketing, sales and service of air/gas compressors, air/gas treatment equipment, generator sets, and related products and services.
OHSAS 18001:2007
Marketing, sales and service of air/gas compressors, air/gas treatment equipment, generator sets, and related products and services.
ESJ - CC - Aire Comprimido Industrial Iberia S.L. Customer Centers Multibrand CT
Las Arenas, 6 - 8, “Pol. Industrial Las Arenas”, 28320 Pinto (Madrid), Alguer, 18 08830 Sant Boi de Llobregat (Barcelona), Spain
ISO 14001:2015
Market and service activities for compressors, dryers, filters and ancillary equipment.
ISO 9001:2015
Market and service activities for compressors, dryers, filters and ancillary equipment.
OHSAS 18001:2007
Market and service activities for compressors, dryers, filters and ancillary equipment.
FRA - CC - ABAC FRANCE SAS
9 Rue Lavoisier, CS 80071 - ZI des Auréats,
26802 Portes les Valence Cedex, France
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors and air/gas treatment equipment.
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors and air/gas treatment equipment.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 31 of 83
Location Activities
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors and air/gas treatment equipment.
FRB - CC - Multiair France
Parc des Ecouardes, 2, Rue Marie Sklodowska,
95150 Taverny, France
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors and air/gas treatment equipment.
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors and air/gas treatment equipment.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors and air/gas treatment equipment.
FRJ - PC - Atlas Copco Mobility Solutions Center
Rue Pierre Curie 165, 60230 Chambly, France
ISO 14001:2015
Marketing, design, manufacturing of compressors, air treatment equipment and related products and services.
ISO 9001:2015
Marketing, design, manufacturing of compressors, air treatment equipment and related products and services.
OHSAS 18001:2007
Marketing, design, manufacturing of compressors, air treatment equipment and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 32 of 83
Location Activities
FRT - CC - Exlair ets Atep
Zac de la Robole - 100 Rue Paul Langevin,
13799 Aix en Provence, France
ISO 14001:2015
Sales, installation, service of air/gas compressors and air/gas treatment equipment.
ISO 9001:2015
Sales, installation, service of air/gas compressors and air/gas treatment equipment.
OHSAS 18001:2007
Sales, installation, service of air/gas compressors and air/gas treatment equipment.
FRT - CC - Exlair ets Techfluid
P.A. de la Plaine, 34 bis rue de la Distillerie, 59650 Villeneuve-d'Ascq, France
ISO 14001:2015
Sales, installation, service of air/gas compressors and air/gas treatment equipment.
ISO 9001:2015
Sales, installation, service of air/gas compressors and air/gas treatment equipment.
OHSAS 18001:2007
Sales, installation, service of air/gas compressors and air/gas treatment equipment.
GBM - CC - ABAC UK
Unit 5, Westway 21 Chesford Grange Warrington, Cheshire, WA1 4SZ, United Kingdom
OHSAS 18001:2007
Sales of Air/Gas Compressors, associated equipment and spare parts, from all Brands of the Brand Portfolio.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 33 of 83
Location Activities
GBT - CC - Atlas Copco Ltd.
Swallowdale Lane, Hemel Hempstead, Hertfordshire, HP2 7EA, United Kingdom
ISO 14001:2015
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
ISO 9001:2015
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
OHSAS 18001:2007
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
GBT - CC - Atlas Copco Ltd. Glasgow Branch Office
1 Wilkie Court, Bothwell Park Industrial Estate, Glasgow, G71 7ER, United Kingdom
ISO 14001:2015
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
ISO 9001:2015
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
OHSAS 18001:2007
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 34 of 83
Location Activities
GBT - CC - Atlas Copco Ltd. Kettering Branch Office
Cunliffe Drive, Kettering, NN16 8LD,
United Kingdom
ISO 14001:2015
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
ISO 9001:2015
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
OHSAS 18001:2007
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
GBT - CC - Atlas Copco Ltd. Leigh Branch Office
Unit 10, Commonwealth Close, Leigh, WN7 3BD,
United Kingdom
ISO 14001:2015
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
ISO 9001:2015
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
OHSAS 18001:2007
The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated equipment.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 35 of 83
Location Activities
GBV - Atlas Copco Medical Ltd
Telford Crescent Speedwell, Industrial Estate, Staveley, S43 3PF, United Kingdom
ISO 14001:2015
Design, Engineering, manufacture, sales and service of Medical Gas equipment.
ISO 9001:2015
Design, Engineering, manufacture, sales and service of Medical Gas equipment.
OHSAS 18001:2007
Design, Engineering, manufacture, sales and service of Medical Gas equipment.
GCH - PC - Atlas Copco Ltd. Trading as EngineeredSolutions
Swallowdale Lane, Hemel Hempstead, Hertfordshire, HP2 7EA, United Kingdom
ISO 14001:2015
Marketing, design, sales, manufacturing, distribution, assembling, and installation of industrial compressors, gas and process compressors and expanders, air and gas treatment equipment and air management systems.
ISO 9001:2015
Marketing, design, sales, manufacturing, distribution, assembling, and installation of industrial compressors, gas and process compressors and expanders, air and gas treatment equipment and air management systems.
OHSAS 18001:2007
Marketing, design, sales, manufacturing, distribution, assembling, and installation of industrial compressors, gas and process compressors and expanders, air and gas treatment equipment and air management systems.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 36 of 83
Location Activities
GRG - CC - Atlas Copco Hellas A.E.
82, Varis Koropiou Av., 19400 Koropi, Athens,
Greece
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
HOY - CC - Atlas Copco Compressors LLC Central Regional Office
2501 Landmeier Road, Elk Grove Village, IL,
60007, United States
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 37 of 83
Location Activities
HOY - CC - Atlas Copco Compressors LLC Eastern Regional Office
92 Interstate Dr., West Springfield, MA, 01089,
United States
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
HOY - CC - Atlas Copco Compressors LLC Southern Regional Office
15045 Lee Road, Houston, TX, 77032,
United States
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 38 of 83
Location Activities
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
HOY - CC - Atlas Copco Compressors LLC Western Regional Office
48434 Milmont Drive, Fremont, CA, 94538,
United States
ISO 14001:2015
Marketing, sales, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
ISO 9001:2015
Marketing, sales, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
OHSAS 18001:2007
Marketing, sales, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
HOY - CC - Atlas Copco Compressors LLC, Corporate office
300 Technology Center Way, Suite 550, Rock Hill, SC, 29730, United States
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 39 of 83
Location Activities
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, assemblies and related products and services.
HUN - CC - Atlas Copco Hungary Kft.
Áti-Sziget Ipari Park 72-73, 2310 Szigetszentmiklós, Hungary
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
INE - Global Engineering Centre India Airpower (GECIA)
Survey No. 247/2, Near Yes Bank, Next to Bharat Petrol Pump, Hinjewadi, Pune, 411057, India
ISO 14001:2015
Provision of following services to Atlas Copco Compressor Technique. Business Area Design, Stress analysis and Flow calculations of components. Design of control system. Preparation of Technical literature and documentation services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 40 of 83
Location Activities
ISO 9001:2015
Provision of following services to Atlas Copco Compressor Technique. Business Area Design, Stress analysis and Flow calculations of components. Design of control system. Preparation of Technical literature and documentation services.
OHSAS 18001:2007
Provision of following services to Atlas Copco Compressor Technique. Business Area Design, Stress analysis and Flow calculations of components. Design of control system. Preparation of Technical literature and documentation services.
INK - CC - Atlas Copco (India) Ltd
Sveanagar, Mumbai-Pune Rd., Dapodi, Pune Maharashtra, 411012, India
ISO 14001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
ISO 9001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
OHSAS 18001:2007
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd
C/O Chakan Logistics Park Pvt Ltd., Gat No 357, Plot No 38, 40, 41, 42, 43 and 44, Ambethan Road, Village - Kharabwadi, Taluka - Khed, Chakan, District - Pune, Maharashtra, 410501, India
ISO 14001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 41 of 83
Location Activities
ISO 9001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
OHSAS 18001:2007
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd
Merlin Acropolis, 14th Floor, Office Unit No. 15/3, 1858/1, Rajdanga Main Road, West Bengal, Kolkata, 700107, India
ISO 14001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
ISO 9001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
OHSAS 18001:2007
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd
7th Floor, Wework, Zenia Building, Hiranandani Circle, Hiranandani Business Park, Thane, Maharashtra, 400607, India
ISO 14001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 42 of 83
Location Activities
ISO 9001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
OHSAS 18001:2007
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd
No 8B, 8th Floor, 1-10-39 to 44, Gumidelli Towers, Begumpet, Main Road, Hyderabad, 500016, India
ISO 14001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
ISO 9001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
OHSAS 18001:2007
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd
8th Floor, Shyamala Tower, 136, Arcot Road, Saligramam, Chennai, 600093, India
ISO 14001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 43 of 83
Location Activities
ISO 9001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
OHSAS 18001:2007
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd
Unitech Business Park, Tower A, Block - F, Sector - 41, South City - 1, Gurgaon, 122001, India
ISO 14001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
ISO 9001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
OHSAS 18001:2007
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd
SCO - 811, First Floor, NAC, Manimajra, Chandigarh, (U.T.), 160101, India
ISO 14001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 44 of 83
Location Activities
ISO 9001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
OHSAS 18001:2007
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd
1A, 5th Floor, Kushal Garden Arcade, Peenya Industrial Area, Phase II, Bangalore, 560058, India
ISO 14001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
ISO 9001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
OHSAS 18001:2007
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd
B-503/504, West Gate, Near YMCA Club, S.G. Highway, Ahmedabad, Gujarat, 380015, India
ISO 14001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 45 of 83
Location Activities
ISO 9001:2015
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
OHSAS 18001:2007
Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
INO - CC - Chicago Pneumatic Compressors
Unitech Business Park, Tower-A, 1°Floor, Gurgaon, Haryana, 122001, India
ISO 14001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
ISO 9001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
OHSAS 18001:2007
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
INO - CC - Chicago Pneumatic Compressors
Merlin Acropolis, 14th Floor, Office Unit No. 15/3, 1858/1, Rajdanga Main Road, West Bengal, Kolkata, 700107, India
ISO 14001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 46 of 83
Location Activities
ISO 9001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
OHSAS 18001:2007
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
INO - CC - Chicago Pneumatic Compressors
Sveanagar, Mumbai-Pune Road, Pune, Maharastra,
411012, India
ISO 14001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
ISO 9001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
OHSAS 18001:2007
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
INO - CC - Chicago Pneumatic Compressors
Rushabh, 2nd Floor, Near Sai Medi, Thane,
400607, India
ISO 14001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 47 of 83
Location Activities
ISO 9001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
OHSAS 18001:2007
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
INO - CC - Chicago Pneumatic Compressors
No. 1-A, 5th Floor, Kushal Garden, Systems Compound, Peenya Industrial Area, 2nd Phase, Bangalore,
560058, India
ISO 14001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
ISO 9001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
OHSAS 18001:2007
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
INO - CC - Chicago Pneumatic Compressors
#8B, 8th Floor, 1-1039 to 64, Gumidelli Towers, Begumpet, Hyderabad, 500016, India
ISO 14001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 48 of 83
Location Activities
ISO 9001:2015
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
OHSAS 18001:2007
Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and dryers.
ITJ - PC - Ceccato Aria Compressa S.R.L. C.ARIA C. S.R.L.
Via Soastene 34, 36040 Brendola (Vicenza),
Italy
ISO 14001:2015
Design, manufacture and servicing of air compressors, air dryers, air filters, blowers, assemblies and related products.
ISO 9001:2015
Design, manufacture and servicing of air compressors, air dryers, air filters, blowers, assemblies and related products.
OHSAS 18001:2007
Design, manufacture and servicing of air compressors, air dryers, air filters, blowers, assemblies and related products.
ITQ - CC - MultiAir Italia SRL representing ABAC, Ceccato and Worthington
Via Galilei Galileo 40, 20092 Cinisello Balsamo - Milano, Italy
ISO 14001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 49 of 83
Location Activities
ISO 9001:2015
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
OHSAS 18001:2007
Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services.
ITR - PC - Atlas Copco ABAC Aria Compressa – AARIAC S.r.l
Via Cristoforo Colombo 3, 10070 Robassomero (Torino), Italy
ISO 14001:2015
Design, manufacture, sales and service of electro compressors, alternative pistons compressors and rotative screw electro compressors.
ISO 9001:2015
Design, manufacture, sales and service of electro compressors, alternative pistons compressors and rotative screw electro compressors.
OHSAS 18001:2007
Design, manufacture, sales and service of electro compressors, alternative pistons compressors and rotative screw electro compressors.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 50 of 83
Location Activities
IYA - CC - Atlas Copco Italia S.p.A. Div. Compressori
Via Galilei Galileo, 40, 20092 Cinisello Balsamo - Milano, Italy
ISO 14001:2015
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other Brands from the Brand Portfolio.
ISO 9001:2015
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other Brands from the Brand Portfolio.
OHSAS 18001:2007
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other Brands from the Brand Portfolio.
JPP - CC - Atlas Copco KK Compressor Technique Business Area
Sumitomo Fudosan Onarimon Tower 8F 1-1-1 Shibakoen, Minato-ku, Tokyo 105-0011, Japan
ISO 14001:2015
Sales and Distribution of compressed air assemblies and aftermarket business.
ISO 9001:2015
Sales and Distribution of compressed air assemblies and aftermarket business.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 51 of 83
Location Activities
OHSAS 18001:2007
Sales and Distribution of compressed air assemblies and aftermarket business.
JPP - CC - Atlas Copco KK Compressor Technique Kawasaki Office
16-1, Higashi Ohgishima, Kawasaki-ku,
Kanagawa-Ken 210-0869, Japan
ISO 14001:2015
Sales and Distribution of compressed air assemblies and aftermarket business.
ISO 9001:2015
Sales and Distribution of compressed air assemblies and aftermarket business.
OHSAS 18001:2007
Sales and Distribution of compressed air assemblies and aftermarket business.
KEN - CC - Atlas Copco Eastern Africa Customer Center LTD
Airport North Road, Embakasi, Nairobi, P.O. Box 40090, 00100, Kenya
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 52 of 83
Location Activities
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
KRC - Atlas Copco Korea Co., Ltd. CT Head Office
6-9 Fl. Yemizi Bldg, 14-1, Pangyoyeok-ro 192 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do,
Republic of Korea
ISO 14001:2015
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand Portfolio.
ISO 9001:2015
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand Portfolio.
OHSAS 18001:2007
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand Portfolio.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 53 of 83
Location Activities
KRC - CC - Atlas Copco Korea Co., Ltd. CT Yongin Branch Office
22-10, Jubuk-ro 173beon-gil, Yonging-si,
Gyeonggi-do 449-935, Republic of Korea
ISO 14001:2015
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand Portfolio.
ISO 9001:2015
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand Portfolio.
OHSAS 18001:2007
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand Portfolio.
MXA - CC - Atlas Copco Mexicana S.A de C.V. Área de Negocios Compresores
Blvrd. Abraham Lincoln No 13, Los Reyes Zona Industrial C.P, 54073 Tlalnepantla de Baz, Estado de México, Mexico
ISO 14001:2015
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 54 of 83
Location Activities
ISO 9001:2015
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand.
OHSAS 18001:2007
Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand.
MYS - CC - Atlas Copco (Malaysia) Sdn Bhd (87259-U) Head Office
26, Jalan Anggerik Mokara 31/47, Kota Kemuning, Seksyen 31, 40460 Shah Alam, Selangor, Malaysia
ISO 14001:2015
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
ISO 9001:2015
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
OHSAS 18001:2007
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 55 of 83
Location Activities
MYS - CC - Atlas Copco (Malaysia) Sdn Bhd (87259-U) Johor Bahru Branch Office
No. 1 Jalan Tiong Emas 1, Kawasan Perindustrian Tiong Nam, 81100 Johor Bahru, Johor, West Malaysia,
Malaysia
ISO 14001:2015
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
ISO 9001:2015
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
OHSAS 18001:2007
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
MYS - CC - Atlas Copco (Malaysia) Sdn Bhd (87259-U) Penang Branch Office
No. 531 & 533, Jalan Masjid Negeri, 11600 Penang, West Malaysia, Malaysia
ISO 14001:2015
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
ISO 9001:2015
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
OHSAS 18001:2007
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 56 of 83
Location Activities
NFA - CC - Oy Atlas Copco Kompressorit Ab
Itäinen Valkoisenlähteentie 14A, 01380 Vantaa,
Finland
ISO 14001:2015
Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket.
ISO 9001:2015
Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket.
OHSAS 18001:2007
Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket.
NLA - CC - Atlas Copco Internationaal B.V. Atlas Copco Compressors Nederland
Merwedeweg 7, 3336 LG Zwijndrecht,
Netherlands
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
NLC - CC - Creemers Compressors B.V.
Galliërsweg 27, 5349 AT Oss, Netherlands
ISO 14001:2015
Sales, installation and maintenance of air compressors.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 57 of 83
Location Activities
OHSAS 18001:2007
Sales, installation and maintenance of air compressors.
NLK - CC - Alup-Grassair Kompressoren B.V.
Galliërsweg 27, 5349 AT Oss, Netherlands
ISO 14001:2015
Sales and service of compressors, generator sets, related accessories and aftermarket products.
ISO 9001:2015
Sales and service of compressors, generator sets, related accessories and aftermarket products.
OHSAS 18001:2007
Sales and service of compressors, generator sets, related accessories and aftermarket products.
NLY - PC - Atlas Copco Internationaal B.V. / Atlas Copco EngineeredSolutions
Technologieweg 19, 4906 AC Oosterhout,
Netherlands
ISO 14001:2015
Sales, design, engineering, procurement, manufacturing, supply and servicing customized and engineered gas purification, nitrogen generation, oxygen generation and biogas upgrading systems and associated products.
ISO 9001:2015
Sales, design, engineering, procurement, manufacturing, supply and servicing customized and engineered gas purification, nitrogen generation, oxygen generation and biogas upgrading systems and associated products.
OHSAS 18001:2007
Sales, design, engineering, procurement, manufacturing, supply and servicing customized and engineered gas purification, nitrogen generation, oxygen generation and biogas upgrading systems and associated products.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 58 of 83
Location Activities
NNA - CC - Atlas Copco Kompressorteknikk AS
Berghagan, Industy Omrade, 1405 Langhus,
Norway
ISO 14001:2015
Marketing, sales ,design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand Portfolio.
ISO 9001:2015
Marketing, sales ,design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand Portfolio.
OHSAS 18001:2007
Marketing, sales ,design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand Portfolio.
NZA - CC - Atlas Copco New Zealand Limited
8 George Bourke Drive, Mount Wellington, Auckland, 1060, New Zealand
ISO 14001:2015
Sales and service. Product portfolio of CT Business Area. This includes Industrial Air Division, CT Service Division, Oil Free Air Division and Quality Air Division.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 59 of 83
Location Activities
ISO 9001:2015
Sales and service. Product portfolio of CT Business Area. This includes Industrial Air Division, CT Service Division, Oil Free Air Division and Quality Air Division.
OHSAS 18001:2007
Sales and service. Product portfolio of CT Business Area. This includes Industrial Air Division, CT Service Division, Oil Free Air Division and Quality Air Division.
PHI - CC - Atlas Copco (Philippines), Inc.
North Main Avenue, Lot 12, Block 2, Laguna Technopark, 4024 Biñan, Laguna, Philippines
ISO 14001:2015
Marketing, sales and service of air/gas compressors and generator sets.
ISO 9001:2015
Marketing, sales and service of air/gas compressors and generator sets.
OHSAS 18001:2007
Marketing, sales and service of air/gas compressors and generator sets.
PKA - CC - Atlas Copco Pakistan (Pvt.) Limited
588, Block H3, Abdul Haque Road, Opposite Emporium Mall, Johar Town, Lahore, Pakistan
ISO 14001:2015
Marketing, sales and aftermarket services of products under Atlas Copco brand as well as other brands.
ISO 9001:2015
Marketing, sales and aftermarket services of products under Atlas Copco brand as well as other brands.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 60 of 83
Location Activities
OHSAS 18001:2007
Marketing, sales and aftermarket services of products under Atlas Copco brand as well as other brands.
PLK - CC - Atlas Copco Polska Sp. z.o.o.
UL. Badylarska 25, 02-484 Warszawa, Poland
ISO 14001:2015
Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket products.
ISO 9001:2015
Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket products.
OHSAS 18001:2007
Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket products.
PNB - PC - Atlas Copco Product Company Pune - Dapodi Plant
Sveanagar, Bombay Pune Rd., Dapodi, Pune, Maharashtra, 411012, India
ISO 14001:2015
Design, Manufacture, Assembly of oil injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
ISO 9001:2015
Design, Manufacture, Assembly of oil injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 61 of 83
Location Activities
OHSAS 18001:2007
Design, Manufacture, Assembly of oil injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Compressors, Dryers and Airline accessories.
PNE - PC - Atlas Copco Product Company - Chakan Plant
S. No.65/2B, Gat No.133, 134/1, 134/2, 139, 141, 145, 146, Village Mahalunge, Taluka Khed, Pune, Maharashtra, 410501, India
ISO 14001:2015
Design, manufacture, assembly of oil injected screw, air compressors, dryers and Generator set.
ISO 9001:2015
Design, manufacture, assembly of oil injected screw, air compressors, dryers and Generator set.
OHSAS 18001:2007
Design, manufacture, assembly of oil injected screw, air compressors, dryers and Generator set.
PNF - PC - Atlas Copco (India) Ltd / Gas and Process Application
Block D/1, Plot No 24, MIDC, Opposite Bird Valley Garden, Telco Road, Chinchwad, Pune, Maharashtra 411019, India
ISO 14001:2015
Design, manufacture, packaging, sales and service of Gas and Process compressors and expanders.
ISO 9001:2015
Design, manufacture, packaging, sales and service of Gas and Process compressors and expanders.
OHSAS 18001:2007
Design, manufacture, packaging, sales and service of Gas and Process compressors and expanders.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 62 of 83
Location Activities
PRA - CC - Sociedade Atlas Copco de Portugal Unipessoal Lda - CT Division Branch office
Rua Eng. Ferreira Dias, 1101, 4100-247 Porto,
Portugal
ISO 14001:2015
Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories and compressed air assemblies.
ISO 9001:2015
Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories and compressed air assemblies.
OHSAS 18001:2007
Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories and compressed air assemblies.
PRA - CC - Sociedade Atlas Copco de Portugal Unipessoal Lda-CT Division
Lagoas Parque Edifício 15 piso 0, 2740-265 Porto Salvo, Portugal
ISO 14001:2015
Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories and compressed air assemblies.
ISO 9001:2015
Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories and compressed air assemblies.
OHSAS 18001:2007
Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories and compressed air assemblies.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 63 of 83
Location Activities
ROF - CC - Atlas Copco Romania Srl
Sos,Bucuresti-Ploiesti Km 13,2, 075100 Bucharest (Otopeni Iilofov), Romania
ISO 14001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
ISO 9001:2015
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
OHSAS 18001:2007
Marketing, sales, design and service of air/gas compressors, generator sets and related products and services.
RSB - CC - Atlas Copco Srbija doo
Milutina Milankovica 23, Belgrade, 11070,
Serbia
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps and air/gas treatment equipment.
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps and air/gas treatment equipment.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps and air/gas treatment equipment.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 64 of 83
Location Activities
RUA - CC - JSC Atlas Copco, CT Division - North-West Regional Office
10/1, Oktyabrskaya emb, St. Petersburg, 193091,
Russian Federation
ISO 14001:2015
Sales and service of Atlas Copco compressors and related equipment in the Russian Federation.
ISO 9001:2015
Sales and service of Atlas Copco compressors and related equipment in the Russian Federation.
OHSAS 18001:2007
Sales and service of Atlas Copco compressors and related equipment in the Russian Federation.
RUA - CC - JSC Atlas Copco, CT Division - Siberian and Far East Regional Office
bldg. 4, 15, Krivoschekovskaya Str., Novosibirsk, 630007, Russian Federation
ISO 14001:2015
Sales and service of Atlas Copco compressors and related equipment in the Russian Federation.
ISO 9001:2015
Sales and service of Atlas Copco compressors and related equipment in the Russian Federation.
OHSAS 18001:2007
Sales and service of Atlas Copco compressors and related equipment in the Russian Federation.
RUA - CC - JSC Atlas Copco, CT Division - URAL - VOLGA Regional Office
bldg. 4, 12, Sibirskiy highway, Yekaterinburg,
Russian Federation
ISO 14001:2015
Sales and service of Atlas Copco compressors and related equipment in the Russian Federation.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 65 of 83
Location Activities
ISO 9001:2015
Sales and service of Atlas Copco compressors and related equipment in the Russian Federation.
OHSAS 18001:2007
Sales and service of Atlas Copco compressors and related equipment in the Russian Federation.
RUA - CC - JSC Atlas Copco, CT Division, Head Office
15 Vashutinskoe Road, Khimki, Moscow, 141402,
Russian Federation
ISO 14001:2015
Sales and service of Atlas Copco compressors, vacuum pumps and systems and related equipment in the Russian Federation.
ISO 9001:2015
Sales and service of Atlas Copco compressors, vacuum pumps and systems and related equipment in the Russian Federation.
OHSAS 18001:2007
Sales and service of Atlas Copco compressors, vacuum pumps and systems and related equipment in the Russian Federation.
SAA - CC - Atlas Industrial Equipment Co.
7th Floor, Room 706 and 707, Falastein Street, Al Rehab District, Jeddah, 21462, Saudi Arabia
ISO 14001:2015
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 66 of 83
Location Activities
ISO 9001:2015
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
SAA - CC - Atlas Industrial Equipment Co. AL-Khobar Regional Office
Dammam. Khobar Highway, Al-Khobar, 31952,
Saudi Arabia
ISO 14001:2015
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
ISO 9001:2015
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 67 of 83
Location Activities
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
SAA - CC - Atlas Industrial Equipment Co. Jubail Regional Office
Second Support Industries - Road 116,
Jubail Industrial City, Saudi Arabia
ISO 14001:2015
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
ISO 9001:2015
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 68 of 83
Location Activities
SAA - CC - Atlas Industrial Equipment Co. Riyadh Regional Office
Khurais Highway Olayan Complex, Riyadh, 11421,
Saudi Arabia
ISO 14001:2015
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
ISO 9001:2015
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
SAA - CC - Atlas Industrial Equipment Co. Safat Regional Office
P.O. Box: 1096, Safat, East Ahmadi, 13011,
Kuwait
ISO 14001:2015
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 69 of 83
Location Activities
ISO 9001:2015
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand portfolio.
SGC - CC - Atlas Copco (South-East Asia) Pte Ltd
25 Tuas Avenue 2, Singapore 639456, Singapore
ISO 14001:2015
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
ISO 9001:2015
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
OHSAS 18001:2007
Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated services.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 70 of 83
Location Activities
SKD - CC - Atlas Copco s.r.o.
Elektrárenská 4 831 04 Bratislava, Slovakia
ISO 14001:2015
Sales of Air / Gas Compressors, associated equipment and spare parts Atlas Copco Brand.
ISO 9001:2015
Sales of Air / Gas Compressors, associated equipment and spare parts Atlas Copco Brand.
OHSAS 18001:2007
Sales of Air / Gas Compressors, associated equipment and spare parts Atlas Copco Brand.
TBI - PC - Atlas Copco Comptec LLC
46 School Road, Voorheesville, NY, 12186-9698,
United States
ISO 14001:2015
Design, manufacture, test and service of compressors and ancillary equipment and components.
ISO 9001:2015
Design, manufacture, test and service of compressors and ancillary equipment and components.
OHSAS 18001:2007
Design, manufacture, test and service of compressors and ancillary equipment and components.
TBI - PC - Atlas Copco Service Center North America
950 Hall Court Deer Park, Houston, TX 77536,
United States
ISO 14001:2015
Design, manufacture, test and service of compressors and ancillary equipment and components.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 71 of 83
Location Activities
ISO 9001:2015
Design, manufacture, test and service of compressors and ancillary equipment and components.
OHSAS 18001:2007
Design, manufacture, test and service of compressors and ancillary equipment and components.
TRT - CC - Atlas Copco Makinalari Imalat A.Ş.
İstasyon Mah. İbişağa Cad No.6, 34940 Tuzla-Istanbul, Turkey
ISO 14001:2015
Sales, marketing and service of stationary compressors and accessories.
ISO 9001:2015
Sales, marketing and service of stationary compressors and accessories.
OHSAS 18001:2007
Sales, marketing and service of stationary compressors and accessories.
TWN - CC - Atlas Copco Taiwan Ltd.
No. 38, Alley 31, Lane 236, Heping Road, Yangmei District, Taoyuan City 32647, Taiwan
ISO 14001:2015
Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 72 of 83
Location Activities
ISO 9001:2015
Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
OHSAS 18001:2007
Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
TWN - CC - Atlas Copco Taiwan Ltd. Kaohsiung Branch Office
No. 75, Jingzhang 3rd Street, Renwu District,
Kaohsiung City 814 814, Taiwan
ISO 14001:2015
Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
ISO 9001:2015
Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
OHSAS 18001:2007
Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 73 of 83
Location Activities
USZ - DC - Atlas Copco LLC North America Service Center
11313 Steele Creek Road, Charlotte, NC, 28273,
United States
ISO 14001:2015
Distribution of air compressors, air treatment equipment, generator sets and related accessories and spares.
ISO 9001:2015
Distribution of air compressors, air treatment equipment, generator sets and related accessories and spares.
OHSAS 18001:2007
Distribution of air compressors, air treatment equipment, generator sets and related accessories and spares.
USZ - DC - Atlas Copco LLC North America Service Center 2nd facility: Charlotte
2101 - C&D Westinghouse Boulevard, Charlotte, NC, 28273, United States
ISO 14001:2015
Distribution of air compressors, air treatment equipment, generator sets and related accessories and spares.
ISO 9001:2015
Distribution of air compressors, air treatment equipment, generator sets and related accessories and spares.
OHSAS 18001:2007
Distribution of air compressors, air treatment equipment, generator sets and related accessories and spares.
UTB - PC - Atlas Copco Mafi-Trench Company LLC
3037 Industrial Parkway, Santa Maria,
CA 93455-1807, United States
ISO 14001:2015
Design, Development, Manufacturing and service of Turbo Expanders.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 74 of 83
Location Activities
ISO 9001:2015
Design, Development, Manufacturing and service of Turbo Expanders.
OHSAS 18001:2007
Design, Development, Manufacturing and service of Turbo Expanders.
UTF - PC - Atlas Copco Houston Product Company
15045 Lee Road, Houston, TX, 77032,
United States
ISO 14001:2015
Design and fabrication of custom and standard packaged compressed air systems for demanding applications in energy, industrial power and petrochemical markets worldwide.
ISO 9001:2015
Design and fabrication of custom and standard packaged compressed air systems for demanding applications in energy, industrial power and petrochemical markets worldwide.
OHSAS 18001:2007
Design and fabrication of custom and standard packaged compressed air systems for demanding applications in energy, industrial power and petrochemical markets worldwide.
UTH - CC - Quincy Compressor LLC
701 Dobson Avenue, AL 36507, United States
ISO 14001:2015
Marketing, Sales, Distribution, installation and service of Air/Gas compressors, Blowers, Vacuum Pumps, Air / Gas treatment Equipment, Assemblies and Related Products and Services under Quincy Brand and all Brands from the Brand Portfolio.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 75 of 83
Location Activities
ISO 9001:2015
Marketing, Sales, Distribution, installation and service of Air/Gas compressors, Blowers, Vacuum Pumps, Air / Gas treatment Equipment, Assemblies and Related Products and Services under Quincy Brand and all Brands from the Brand Portfolio.
OHSAS 18001:2007
Marketing, Sales, Distribution, installation and service of Air/Gas compressors, Blowers, Vacuum Pumps, Air / Gas treatment Equipment, Assemblies and Related Products and Services under Quincy Brand and all Brands from the Brand Portfolio.
UTR - CC - Atlas Copco Medical Products Beacon Medaes
1059 Paragon Way, Rock Hill 111, SC, 29730,
United States
ISO 14001:2015
Design, manufacture, sales and service of medical air products, medical vacuum systems, manifolds and pipeline components for use in medical facilities.
ISO 9001:2015
Design, manufacture, sales and service of medical air products, medical vacuum systems, manifolds and pipeline components for use in medical facilities.
OHSAS 18001:2007
Design, manufacture, sales and service of medical air products, medical vacuum systems, manifolds and pipeline components for use in medical facilities.
UTX - CC - Atlas Copco Compressors LLC, Edmac
2101 Westinghouse Blvd, Suite D, Charlotte, NC,
28273, United States
ISO 14001:2015
Supplier of parts, accessories and consumables for air compressors, blowers and vacuum pumps.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 76 of 83
Location Activities
ISO 9001:2015
Supplier of parts, accessories and consumables for air compressors, blowers and vacuum pumps.
OHSAS 18001:2007
Supplier of parts, accessories and consumables for air compressors, blowers and vacuum pumps.
UTY - PC - Quincy Compressor LLC
701 Dobson Avenue, Bay Minette, AL, 36507,
United States
ISO 14001:2015
Design, Manufacturing, Assembling of Air / Gas Compressors, Vacuum Pumps, Air/ Gas, Assemblies and Related Products and Services under Quincy Brand and all Atlas Copco Multi-Brands.
ISO 9001:2015
Design, Manufacturing, Assembling of Air / Gas Compressors, Vacuum Pumps, Air/ Gas, Assemblies and Related Products and Services under Quincy Brand and all Atlas Copco Multi-Brands.
OHSAS 18001:2007
Design, Manufacturing, Assembling of Air / Gas Compressors, Vacuum Pumps, Air/ Gas, Assemblies and Related Products and Services under Quincy Brand and all Atlas Copco Multi-Brands.
UVC (CR) - Atlas Copco Compressors LLC
1059 Paragon Way, Rock Hill, SC, 29730,
United States
ISO 14001:2015
Assembly and test of compressor and generator products along with the distribution of industrial compressors, oil free compressors, parts and service items.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 77 of 83
Location Activities
ISO 9001:2015
Assembly and test of compressor and generator products along with the distribution of industrial compressors, oil free compressors, parts and service items.
OHSAS 18001:2007
Assembly and test of compressor and generator products along with the distribution of industrial compressors, oil free compressors, parts and service items.
VNE - CC - Atlas Copco Vietnam Co., Ltd . Head Office
1st fl., Simco Building, 28 Pham Hung Road,
Tu Liem district Hanoi, Vietnam
ISO 14001:2015
Sales, design, supply and installation of industrial compressors (including air and gas treatment equipment and air management systems), generators, medical gas pipeline equipment and accessories ; and aftermarket (including service and spare part) for equipment.
ISO 9001:2015
Sales, design, supply and installation of industrial compressors (including air and gas treatment equipment and air management systems), generators, medical gas pipeline equipment and accessories ; and aftermarket (including service and spare part) for equipment.
OHSAS 18001:2007
Sales, design, supply and installation of industrial compressors (including air and gas treatment equipment and air management systems), generators, medical gas pipeline equipment and accessories ; and aftermarket (including service and spare part) for equipment.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 78 of 83
Location Activities
VNE - CC - Atlas Copco Vietnam Co., Ltd Binh Duong Branch Office
Lof F, road 12, Song Than IZ2, Di An District Binh Duong Province, Vietnam
ISO 14001:2015
Sales, design, supply and installation of industrial compressors (including air and gas treatment equipment and air management systems), generators, medical gas pipeline equipment and accessories; and aftermarket (including service and spare part) for equipment.
ISO 9001:2015
Sales, design, supply and installation of industrial compressors (including air and gas treatment equipment and air management systems), generators, medical gas pipeline equipment and accessories; and aftermarket (including service and spare part) for equipment.
OHSAS 18001:2007
Sales, design, supply and installation of industrial compressors (including air and gas treatment equipment and air management systems), generators, medical gas pipeline equipment and accessories; and aftermarket (including service and spare part) for equipment.
WUX - PC - Atlas Copco (Wuxi) Compressor Co., Ltd. (Plant I)
No. 22 Changjiang Road, New District, Wuxi,
Jiangsu 214028, China
ISO 14001:2015
Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, vacuum pumps, desiccant compressed air dryers, compressed air filters, auxiliary equipment and accessories.
ISO 9001:2015
Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, vacuum pumps, desiccant compressed air dryers, compressed air filters, auxiliary equipment and accessories.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 79 of 83
Location Activities
OHSAS 18001:2007
Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, vacuum pumps, desiccant compressed air dryers, compressed air filters, auxiliary equipment and accessories.
WUX - PC - Atlas Copco (Wuxi) Compressor Co., Ltd. (Plant II)
No. 45 Ximei Road, New District, Wuxi,
Jiangsu 214028, China
ISO 14001:2015
Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, vacuum pumps, desiccant compressed air dryers, compressed air filters, auxiliary equipment and accessories.
ISO 9001:2015
Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, vacuum pumps, desiccant compressed air dryers, compressed air filters, auxiliary equipment and accessories.
OHSAS 18001:2007
Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, vacuum pumps, desiccant compressed air dryers, compressed air filters, auxiliary equipment and accessories.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 80 of 83
Location Activities
ZAA - CC - Atlas Copco Industrial SA (Pty) Ltd
10 Innes Road, Jet Park, Boksburg, Gauteng,
South Africa
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
ZAA - CC - Atlas Copco Industrial SA (Pty) Ltd, Cape Town office
Unit 6, Jarin Park, 3 Dawn Road, Montague Gardens, Cape Town, South Africa
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 81 of 83
Location Activities
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
ZAA - CC - Atlas Copco Industrial SA (Pty) Ltd, Durban office
47 Gillits Road, Unit D7 Pinemead Industrial Park, Westmead Durban, South Africa
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 82 of 83
Location Activities
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
ZAA - CC - Atlas Copco Industrial SA (Pty) Ltd, Port Elizabeth office
41B 5th Avenue, Newton Park, Port Elizabeth,
South Africa
ISO 14001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
ISO 9001:2015
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
OHSAS 18001:2007
Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands i.e. multi-brand.
Certificate identity number: 10242112
Certificate Schedule
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 83 of 83
Location Activities
ZDI - CC - Atlas Copco (Thailand) Ltd.
125 Moo Wellgrow Industrial Estate, Bangna-Trad rd. km 36, Bangwua Bangpakong, Chachoengsao, 24130,
Thailand
ISO 14001:2015
Sales and service of compressors, generator sets, related accessories and aftermarket products.
ISO 9001:2015
Sales and service of compressors, generator sets, related accessories and aftermarket products.
OHSAS 18001:2007
Sales and service of compressors, generator sets, related accessories and aftermarket products.
top related