Transcript
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017.
This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory
quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
CERTIFICATE OF ACCREDITATION
ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA
This is to certify that
Acuren
705 Albany St.
Dayton, OH 45408
has been assessed by ANAB and meets the requirements of international standard
ISO/IEC 17025:2017 while demonstrating technical competence in the field of
TESTING
Refer to the accompanying Scope of Accreditation for information regarding the types of
activities to which this accreditation applies
AT-1309
Certificate Number
Certificate Valid Through: 02/08/2022
Version No. 006 Issued: 11/22/2019
Version 006 Issued: November 22, 2019 www.anab.org
Page 1 of 2
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017
Acuren 705 Albany St.
Dayton, Ohio 45408
Chad Schmidt 937 228 9729
TESTING
Valid to: February 8, 2022 Certificate Number: AT-1309
Non-Destructive Testing
Specific Tests and/or
Properties Measured
Specification, Standard,
Method, or Test Technique
Items, Materials or
Product Tested
Key Equipment or
Technology
Radiography
ASTM E94, E1030, E1032,
E1742, E2104
ASME Sections: V, Art.2;
AWS D1.1, D1.2, D1.5,
D17.1;
MIL-STD453, 2175A PN
1601
Customer Specified
Acuren Internal Procedure
Automotive
Aerospace
Nuclear
Commercial
X-ray
Iridium / Co 60
CR-Flex unit
DDA Flat Panel
Liquid Penetrant
ASTM E165, E1209, E1219,
E1220, E1417, E1418; PN
1603, ASME Sections: V,
Art.6;
MIL-STD6866;
NAVSEA T9074-AS-GIB-
010/271;
ANSI: B31.1. 31.3
Customer Specified
Acuren Internal Procedure
Automotive
Aerospace
Nuclear
Commercial
Pin gages
Magnetic Particle
ASTM A275, E709, E1444;
ASME Sections: V, Art.7;
AWS D14.1; PN 1604
NAVSEA T9074-AS-GIB-
010/271
Customer Specified
Acuren Internal Procedure
Automotive
Aerospace
Nuclear
Commercial
Magnaflux
Mag Particle Bench
Version 006 Issued: November 22, 2019 www.anab.org
Page 2 of 2
Non-Destructive Testing
Specific Tests and/or
Properties Measured
Specification, Standard,
Method, or Test Technique
Items, Materials or
Product Tested
Key Equipment or
Technology
Ultrasonic
ASTM A388, A435, A577,
A609, A745, E114, E164,
E494, E587, E797,
ASME Sections: V, Art.5;
NAVSEA T9074-AS-GIB-
010/271
ASME/ANSI: B31.1, B31.3
Customer Specified
Acuren Internal Procedure
Automotive
Aerospace
Nuclear
Commercial
Ultrasonic
Meters
Visual
ASME: V, Art.9;
AWS D1.1, D.2, D1.5
SPVT-1, VT-1
Customer Specified
Acuren Internal Procedure
Automotive
Aerospace
Nuclear
Commercial
Visual examination only
Note:
1. This scope is formatted as part of a single document including Certificate of Accreditation No. AT-1309.
2. All scope fields of test can be conducted offsite as field tests.
top related