Brochure - Compex Systems – Leader in OEM Wireless …€¦ · MMJ, MML, MMS Series ... brochure: Access point ... self-healing wireless network with seamless roaming between devices.
Post on 15-May-2018
234 Views
Preview:
Transcript
MMZ, MMN, MMJ, MML, MMS Series
Indoor and Outdoor Access PointsModel: MMZ344, MMZ531, MMZ558, MMN344, MMN531, MMN558, MMJ342, MMJ342 Plus, MMJ344, MMJ344 Plus, MMJ531, MML342,
MPS344, MMS344Qualcomm Atheros Chipset
Dual Band Concurrent 802.11n / 802.11ac
High Power and Long Range
Brochure
brochure: Access point
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | 16/11/16
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,
Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
Features
Compex Access Points are powered by high performance Qualcomm Atheros chipsets such as MIPS 74Kc architecture 700MHz QCA9558. QCA chipsets are designed with on-board processors and hardware acceleration to offload Wi-Fi processing from the host CPU.
Qualcomm Atheros MIPS Chipset
MMZ Indoor Access Points feature smart pyramidal smart antenna that provide high isolation, strong anti-jamming capability and wide coverage.
Indoor Pyramidal Smart AntennaAll Compex Access Points features dual Fast Ethernet or Gigabit Ethernet RJ45 Ports supporting different combinations of WAN & LAN and Dual LAN configuration for high performance connectivity.
Dual LAN/WAN Ports
All Compex Access Points support OpenWRT, a modular system, where users can select and install additional features on top of pre-compiled firmware images from the open source community such as advanced QoS and firewall features and captive portal support for creating Wi-Fi hot spots.
OpenWRT Support
All Compex Access Points support Power over Ethernet through one of the two RJ45 ports either passive 24V PoE or IEEE 802.3af/at standard options.
Power over Ethernet Supported
All Compex Access Points features LED Indicators that are customizable for indicating signal strength for different on-board wireless interface.
LED Indicators
MMJ, MML and MPS Outdoor Access Points feature an advanced antenna system with built-in High Gain Dual-Polarized Antenna with dedicated metal reflector ensures higher gain and lower noise interference for effective wireless connectivity over a long distance.
Outdoor Long Range Antenna
Compex Access Points features either Dual-Band or Single band Wireless as a fast and versatile solution for bringing WiFi Connectivity to your existing wired network, or extending your current wireless network.
Dual-Band / Single Band WiFi
brochure: Access point
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | 16/11/16
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,
Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
Compex Outdoor Access Points are dedicated to effective solutions for outdoor wireless networking applications. Featuring Qualcomm Atheros enterprise level chipsets, high gain antennas and specially designed weatherproof enclosure, and PoE power supply, Professional performance, coupled with user-friendly design, makes Compex Outdoor Access Poitns an ideal choice for both business and home users.
Outdoor PtMP / PtP / CPE Access Point
Compex Indoor Access Points support Mesh Networking that means you can install units like traditional access points, hard wired to the Internet, and add additional units that only require power wherever you need to extend coverage or fill holes. All access points work together to form a self-organizing, self-healing wireless network with seamless roaming between devices.
Indoor Mesh Access Point
Applications
5GHz B
ackhau
l Connectivity
5GHz Backhaul Connectivity
2.4GHz Wireless Coverage
2.4GHz Wireless Coverage
MMJ344 PlusOutdoor AP
MMJ344 PlusOutdoor AP
MMS344Outdoor AP
Warehouse
FactoryHead Office
Example of Outdoor Point-to-MultiPoint and Customer-Premise-Equipment application of MMJ and MMS series of AP
5GHz Wireless Coverage
2.4GHz Wireless Coverage
Mesh Access Point
5GHz Wireless Coverage
2.4GHz Wireless Coverage
Mesh Access Point5GHz Wireless Coverage
2.4GHz Wireless Coverage
Mesh Access Point
5GHz Wireless Coverage
2.4GHz Wireless Coverage
Root Access Point
5GHz Mesh Connectivity
5GHz Mesh Connectivity
5GHz Mesh Connectivity
5GHz Mesh Connectivity
brochure: Access point
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | 16/11/16
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,
Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
MODEL MMJ344 Plus MMJ344 MMS344 MPS344
Wi-Fi RATE AC867 + N300Mbps 5GHz AC867Mbps 5GHz AC867Mbps AC867 + N300Mbps
CONCURRENT DUAL BAND
STANDARDS 802.11 a/b/g/n/ac 802.11 a/n/ac 802.11 a/n/ac 802.11 a/b/g/n/ac
HARDWARE SPECIFICATIONSWiSoC AR9344 AR9344 AR9344 AR9344
PROCESSOR SPEED 560MHz 560MHz 560MHz 560MHz
ETHERNET 2 x 10/100/1000Mbps 2 x 10/100/1000Mbps 2 x 10/100/1000Mbps 2 x 10/100/1000Mbps
ANTENNA
Integrated1 x 17dBi 5GHz Dual-polarisation
2 x 7dBi 2.4GHz Omni Dipole array antenna
Integrated1 x 17dBi 5GHz Dual-polarisation
antenna
Integrated1 x 19dBi 5GHz Polarisation
antenna
Integrated2 x 6.5dBi 2.4GHz Dual-polarisation2 x 7dBi at 5GHz
Dual-polarisation antenna
POWER OPTIONS 24V Passive PoE or 802.3af/at¹24V Passive PoE
or 802.3af/at¹
PWR CONSUMPTION 10.5W (Max) 10.5W (Max) 10.5W (Max) 10.5W (Max)
WEATHERPROOF IP53 IP53 IP67 IP67
LED INDICATOR
RESET BUTTON
BUZZER
OPENWRT SUPPORT
MODEL MMJ531 MMJ342 Plus MMJ342 MML342
Wi-Fi RATE 2.4GHz N300Mbps 2.4GHz + 5GHz N300Mbps 5GHz N300Mbps 5GHz N300Mbps
CONCURRENT DUAL BAND
STANDARDS 802.11 b/g/n 802.11 a/b/g/n 802.11 a/n 802.11 a/n/ac
HARDWARE SPECIFICATIONSWiSoC QCA9531 AR9342 AR9342 AR9342
PROCESSOR SPEED 650MHz 560MHz 560MHz 560MHz
ETHERNET 2 x 10/100Mbps 2 x 10/100Mbps 2 x 10/100Mbps 2 x 10/100Mbps
ANTENNA
Integrated1 x 11dBi 2.4GHz
Dual-polarisation
Integrated1 x 17dBi 5GHz
Dual-polarisation 2 x 7dBi 2.4GHz
Omni Dipole array antenna
Integrated1 x 17dBi 5GHz
Dual-polarisation antenna
Integrated1 x 15dBi 5GHz Directional Du-
al-polarisation antenna
POWER OPTIONS 24V Passive PoE or 802.3af
PWR CONSUMPTION 6.9W (Max) 7.5W (Max) 5W (Max) 5W (Max)
WEATHERPROOF IP67 IP53 IP53 IP53
LED INDICATOR
RESET BUTTON
BUZZER
OPENWRT SUPPORT OPERATING ENVIRONMENT
-20ºC to 70ºC -20ºC to 70ºC -20ºC to 70ºC -20ºC to 70ºC
Outdoor AP Comparison Chart
brochure: Access point
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | 16/11/16
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,
Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
MODEL MMZ344 MMZ558 MMZ531
Wi-Fi RATE AC867 + N300Mbps AC1300 + N450Mbps N300Mbps
CONCURRENT DUAL BAND
STANDARDS 802.11 a/b/g/n/ac 802.11 a/b/g/n/ac 802.11 b/g/n
HARDWARE SPECIFICATIONSWiSoC AR9344 QCA9558 QCA9531
PROCESSOR SPEED 533MHz 700MHz 650MHz
ETHERNET 2 x 10/100/1000Mbps 2 x 10/100/1000Mbps 2 x 10/100Mbps
ANTENNAIntegrated
2x 4dBi 2.4GHz + 2 x 5dBi 5GHz Smart Pyramidal Omni-directional antenna
Integrated 3 x 4dBi 2.4GHz + 3 x 5dBi 5GHz
Smart Pyramidal Omni-directional antenna
Integrated 2 x 4dBi 2.4GHz
Smart Pyramidal Omni-directional antenna
MODE AP / Station / Station WDS / Access Point WDS / Router*
POWER OPTIONS IEEE 802.3af/at + DC Jack IEEE 802.3af + DC Jack
PWR CONSUMPTION 10.5W (Max) 13.6W (Max) 9W (Max)
CEILING MOUNT DESIGN
LED INDICATOR
RESET BUTTON
OPENWRT SUPPORT OPERATING ENVIRONMENT
-20ºC to 70ºC -20ºC to 70ºC -20ºC to 70ºC
MODEL MMN344 MMN558 MMN531
Wi-Fi RATE AC867 + N300Mbps AC1300 + N450Mbps N300Mbps
CONCURRENT DUAL BAND
STANDARDS 802.11 a/b/g/n/ac 802.11 a/b/g/n/ac 802.11 b/g/n
HARDWARE SPECIFICATIONSWiSoC AR9344 QCA9558 QCA9531
PROCESSOR SPEED 560MHz 700MHz 650MHz
ETHERNET 2 x 10/100/1000Mbps 2 x 10/100/1000Mbps 2 x 10/100Mbps
ANTENNAExternal
2x 2dBi 2.4GHz + 2x 2dBi 5GHz Rubber Duck Antenna
External 3x 2dBi 2.4GHz + 3x 2dBi 5GHz
Rubber Duck Antenna
External 2x 2dBi 2.4GHz
Rubber Duck Antenna
MODE AP / Station / Station WDS / Access Point WDS / Router*
POWER OPTIONS IEEE 802.3af/at + DC Jack IEEE 802.3af + DC Jack
PWR CONSUMPTION 10.5W (Max) 13.6W (Max) 9W (Max)
WALL MOUNT DESIGN
LED INDICATOR
RESET BUTTON
OPENWRT SUPPORT OPERATING ENVIRONMENT
-20ºC to 70ºC -20ºC to 70ºC -20ºC to 70ºC
Indoor AP Comparison Chart
About Compex SystemsEstablished in 1987, Compex has been specializing in product design and manufacturing and delivering superior OEM/ODM/JDM services in wireless communications. Dedicated to innovative design for RF wireless modules, host boards, and antenna, Compex also provides software design, product testing and certification, as well as fully cus-tomized design and manufacturing. Our wireless communications solu-tion and services encompass both indoor and outdoor mesh network, hotspot, and subscriber units.
Leveraging our expertise in wireless system design, Compex strives to meet wide-ranging development demands. Having worked with Qual-comm Atheros over 10 years, we offer innovative hardware, software, and manufacturing capabilities through industry-specific design, engi-neering, and services tailored to the market needs.
Compex is the only Qualcomm Atheros Authorized Design Center (ADC) in East and South East Asia. We are ideally situated to support OEMs and manufacturers in this time zone. With our 2 locations in Sin-gapore and Suzhou, we have the added advantage of being physically closer to our customers, making support much easier. We can address our customer’s most pressing issues much faster too.
Corporate HeadquartersCompex Systems Pte Ltd
9 Harrison Road #05-01 Singapore 369651Tel: 65 6286 2086 Fax: 65 6280 9947
Email: sales@compex.com.sghttp://www.compex.com.sg/
Manufacturing PlantCompex (Suzhou) Co. Ltd 12,
ChuangTou Industrial Square LouFeng North,Suzhou Industrial Park Suzhou, P.R.China 215122Tel: 86 (512) 6295 0050 Fax: 86 (512) 6295 0026
http://www.compexcn.com.cn/
top related