Transcript
Broadcrown Limited
Airfield Industrial Estate, Hixon, Stafford,
Staffordshire, ST18 0PF, UK.
Tel: +44 (0) 1889 272200
Fax: +44 (0) 1889 272220
Email: info@broadcrown.co.uk
60Hz
In line with the Broadcrown Holdings PLC policy of continual development and improvement the information given here is only intended for the assistance of clients and is not binding upon the company which reserves the rights to alter speci�cations of its products without notice. ©Broadcrown Group of Companies 2009/60/03
Broadcrown Inc. 10050 NW 116th Way, Suite 4, Medley, Florida 33178, USA. Tel: +1 305 888 1414 Fax: +1 305 888 1801 Email: info@broadcrown.com
Broadcrown (Singapore) Limited 3791 Jalan Bukit Merah,#05-08, E-Centre @ Redhill,Singapore 159471.Tel: +65 6235 3630Fax: +65 6732 4355Email: brdcrown@singnet.com.sg
Broadcrown (West Africa) LimitedPlot 4/6 Kudirat Abiola Way,Alausa, Ikeja, Nigeria.Tel: +234 (0) 1 761 7107 +234 (0) 1 761 7595 +234 (0) 1 482 2577Email: mail@broadcrownwestafrica.com sales@broadcrownwestafrica.com
Broadcrown South Africa (PTY) LTDGolden Isle, Durban RdBellville, Cape TownSouth Africa.Tel: +27 (0)21 9196501Fax: +27 (0)21 9196699Email: info@broadcrown.co.za
Diesel Generating Sets
August 2009
Broadcrown Power India (PVT) Ltd.R - 06 A, 3rd Floor,MGF Plaza,Mehrauli - Gurgaon Road,Gurgaon - 122002,Haryana, India.Tel: +91 124 4260627/4260628Mobile: +91 9871110765Fax: +91 124 4260626Email: sales@broadcrownindia.com
Broadcrown (China) LTDRM 1503, Tower B, Soho Newtown88 Jianguo AvenueChaoyang Dist., BeijingChina 100022Tel: 86 10 8589 3698Fax: 86 10 8589 5771Email: sales@broadcrown.com.cn
Established in 1976, Broadcrown today is one of the world’s leading manufacturers of the highest quality generating sets and complete power generation systems.
Broadcrown has always paid close attention to the special and constantly changing needs of the international power generation market and has developed its skills, knowledge, technology and manufacturing base with this in mind.
The full product range offers a wide range of standard and bespoke power generation systems to the worldwide market, from 75kW to 40MW as a single unit. They include:
• Diesel and gas powered generators for standby, prime and baseload power. • Gas powered cogeneration (Combined Heat and Power [CHP]) modules. • Offshore and onshore diesel and gas powered generators. • Uninterruptible Power Supply (UPS) systems. • Mobile, trailer mounted, diesel powered generators. • An extensive range of generator control systems ranging from basic key start to automatic mains fail operation. • Independent power supply and mains synchronising. • Sophisticated load management control systems incorporating dual redundant Programmable Logic Controllers (PLCs). • Total turnkey power supply solutions.
All Broadcrown products are available as suitable for installation within a dedicated plant room, and all except Uninterruptible Power Supply (UPS) systems can be supplied within a sound attenuated canopy, weatherproof acoustic enclosure or ISO style container for outdoor, all weather use.
With corporate headquarters and two state of the art factories in the United Kingdom, Broadcrown undertakes all aspects of independent power supply:
• Design
• Project management
• Manufacture
• Installation
• Commissioning
• Maintenance
All Broadcrown products are designed and manufactured in the United Kingdom. Larger generators, with outputs exceeding 550kVA (and custom built units), are designed and manufactured in a purpose built 28,000 sq ft factory at the corporate headquarters in Hixon, Staffordshire. Smaller generators are manufactured in a dedicated 20,000 sq ft plant site in Newtown, Wales.
Both factories have been designed and equipped for the manufacture of power generation systems and employ state of the art design and manufacturing techniques.
The highest quality standards are a fundamental requirement of Broadcrown. This is rigorously applied to everything that is product related, including design, working practices and factory specifications. Broadcrowns strict adherence to these high standards resulted in it becoming the first power generation company to be approved to BS5750/ISO 9001 in 1986.
In order to focus on the specific needs of individual customers, Broadcrown is structured into several operating divisions each with its own dedicated staff and resources. Each of these divisions is dedicated to providing the best possible levels of service and customer satisfaction.
These high standards are maintained by a growing international network of distributors backed by the Broadcrown Regional Support Centres of Miami, Singapore, Nigeria, South Africa, India and China, providing worldwide product availability and after sales support. With its significant investment in new facilities and its customer focused organization, Broadcrown is able to blend design excellence with production efficiency to produce cost-effective power generation systems that fully meet, or where possible exceed, the precise standards of design, installation, operation and performance that we feel our worldwide customers deserve.
To fully satisfy these needs, Broadcrown has developed an enviable reputation for the technical excellence of its staff, combining an extensive skill, experience and knowledge base with cutting edge technology to create a range of unrivalled products.
In the development of their ever-expanding product range Broadcrown has always sought to combine in house skills, experience and technology with the active involvement of the very best component manufacturers. This gives the benefit of employing both in house experience and know how together with the latest specialist cutting edge technology and knowledge of our suppliers.
This highly successful product development strategy enables Broadcrown to produce an exceptional range of ‘standard’ products. However possibly the greatest benefit of this approach is in the design and production of a wide range of bespoke power generation solutions, designed to supply the increasing demand for more challenging, specialized and higher output power supply systems.
Broadcrown are delighted to provide solutions for challenging power generation requirements. These projects may involve parameters such as stringent noise control, restricted space, remote cooling arrangements, special voltages and more.Broadcrown will also supply total turnkey power solutions, covering all aspects of the project from initial site survey to commissioning, including site and project management.
The Broadcrown objective is to produce the right product for the application, designed, built, installed and commissioned by highly trained and experienced engineers in order to not only ensure, but also where possible exceed, complete customer satisfaction.
2 3
Established in 1976, Broadcrown today is one of the world’s leading manufacturers of the highest quality generating sets and complete power generation systems.
Broadcrown has always paid close attention to the special and constantly changing needs of the international power generation market and has developed its skills, knowledge, technology and manufacturing base with this in mind.
The full product range offers a wide range of standard and bespoke power generation systems to the worldwide market, from 75kW to 40MW as a single unit. They include:
• Diesel and gas powered generators for standby, prime and baseload power. • Gas powered cogeneration (Combined Heat and Power [CHP]) modules. • Offshore and onshore diesel and gas powered generators. • Uninterruptible Power Supply (UPS) systems. • Mobile, trailer mounted, diesel powered generators. • An extensive range of generator control systems ranging from basic key start to automatic mains fail operation. • Independent power supply and mains synchronising. • Sophisticated load management control systems incorporating dual redundant Programmable Logic Controllers (PLCs). • Total turnkey power supply solutions.
All Broadcrown products are available as suitable for installation within a dedicated plant room, and all except Uninterruptible Power Supply (UPS) systems can be supplied within a sound attenuated canopy, weatherproof acoustic enclosure or ISO style container for outdoor, all weather use.
With corporate headquarters and two state of the art factories in the United Kingdom, Broadcrown undertakes all aspects of independent power supply:
• Design
• Project management
• Manufacture
• Installation
• Commissioning
• Maintenance
All Broadcrown products are designed and manufactured in the United Kingdom. Larger generators, with outputs exceeding 550kVA (and custom built units), are designed and manufactured in a purpose built 28,000 sq ft factory at the corporate headquarters in Hixon, Staffordshire. Smaller generators are manufactured in a dedicated 20,000 sq ft plant site in Newtown, Wales.
Both factories have been designed and equipped for the manufacture of power generation systems and employ state of the art design and manufacturing techniques.
The highest quality standards are a fundamental requirement of Broadcrown. This is rigorously applied to everything that is product related, including design, working practices and factory specifications. Broadcrowns strict adherence to these high standards resulted in it becoming the first power generation company to be approved to BS5750/ISO 9001 in 1986.
In order to focus on the specific needs of individual customers, Broadcrown is structured into several operating divisions each with its own dedicated staff and resources. Each of these divisions is dedicated to providing the best possible levels of service and customer satisfaction.
These high standards are maintained by a growing international network of distributors backed by the Broadcrown Regional Support Centres of Miami, Singapore, Nigeria, South Africa, India and China, providing worldwide product availability and after sales support. With its significant investment in new facilities and its customer focused organization, Broadcrown is able to blend design excellence with production efficiency to produce cost-effective power generation systems that fully meet, or where possible exceed, the precise standards of design, installation, operation and performance that we feel our worldwide customers deserve.
To fully satisfy these needs, Broadcrown has developed an enviable reputation for the technical excellence of its staff, combining an extensive skill, experience and knowledge base with cutting edge technology to create a range of unrivalled products.
In the development of their ever-expanding product range Broadcrown has always sought to combine in house skills, experience and technology with the active involvement of the very best component manufacturers. This gives the benefit of employing both in house experience and know how together with the latest specialist cutting edge technology and knowledge of our suppliers.
This highly successful product development strategy enables Broadcrown to produce an exceptional range of ‘standard’ products. However possibly the greatest benefit of this approach is in the design and production of a wide range of bespoke power generation solutions, designed to supply the increasing demand for more challenging, specialized and higher output power supply systems.
Broadcrown are delighted to provide solutions for challenging power generation requirements. These projects may involve parameters such as stringent noise control, restricted space, remote cooling arrangements, special voltages and more.Broadcrown will also supply total turnkey power solutions, covering all aspects of the project from initial site survey to commissioning, including site and project management.
The Broadcrown objective is to produce the right product for the application, designed, built, installed and commissioned by highly trained and experienced engineers in order to not only ensure, but also where possible exceed, complete customer satisfaction.
2 3
Generator Designations & Definition of RatingsGenerator Model Designations All generator model designations begin with the prefix ‘BC’.The following letter(s) are used to indicate the manufacturer of the engine on which the generator is based.
For example: Lister — BCL Yanmar — BCY John Deere — BCJD Volvo — BCV Deutz — BCD Cummins — BCC Mitsubishi — BCM MTU — BCMU
For the Lister, Yanmar, Mitsubishi (Midi), John Deere, Deutz and Volvo Ranges:The next part of the designation is a number which represents the rating of the generator followed by a frequency and phase indicator thus: 60Hz 3-Phase BCXX [max standby rating in kWe]-60 60Hz Single Phase BCXX [maximum rating in kWe]-60SP
For the Cummins, Mitsubishi and MTU (large) Ranges:The next part of the designation is a number which represents the rating of the generator followed by the ‘P’ or ‘S’ indicator, followed by a frequency indicator thus: 60Hz 3-Phase Prime BCXX [prime rating in kWe]P-60 60Hz 3-Phase Standby BCXX [max standby rating in kWe]S-60
The final part of the designation indicates the appropriate level of emissions certification, if applicable. For example:
60Hz, compliant with EPA Tier 2 - T2 60Hz, compliant with EPA Tier 3 - T3
Summary for the Midi, John Deere and Volvo Ranges:
Summary for the Cummins, Mitsubishi and MTU Ranges:
8·6kW~
35kWMidi Range: 1 Phase 60Hz
Engine ManufactureJD - John Deere D - DeutzM - Mitsubishi V - Volvo
L - Lister Y - Yanmar
Frequency60Hz
PhaseSP - Single Phase
omitted for 3-Phase
Emissions LevelT2, T3 etc, or omitted
Standard Prefix
Engine ManufactureC - Cummins
M - MitsubishiMU - MTU
Frequency60Hz
For 60Hz 3-Phase Prime Prime kWe (0·8pf)For 60Hz 3-Phase Standby Max Standby kWe (0·8pf)
For 60Hz 3-Phase Max Standby kWe (0·8pf)For 60Hz Single Phase Maximum kWe (1·0pf)
P - PrimeS - Standby
Emissions LevelT2, T3 etc, or omitted
Standard Prefix
5
StandbyRating (LTP)
CanopyVersion
Genset Model Weight(Wet)
(lb)
EnclosureType
John Deere
Mitsubishi
Yanmar
Open Set Version
AlternatorModel
Engine Specifications
EngineManufacturer
M 1
John Deere
Yanmar
PrimeRating (PRP)
kWe(kVA)
EngineModel
EPA 2008 CERTIFIED 240/120V
4
Dimensions(L × W × H)
(in)
Fuel TankCapacity(US gal)
15
kWe(kVA)
CylinderArrangement
4 in line
Bore/Stroke
(in)
Fuel Cons100% Load(US gal/hr)
Cubic Capacity
(in3)
BCY 18-60SP iT4 M 1BCI 184 E18 4TNV 88 BGB 155055 × 25 × 52 1518 4 in line 3·46/3·54 1·7133·6
BCY 18-60SP M 1BCI 184 E18 4TNV 88 GB 155055 × 25 × 52 1518 4 in line 3·46/3·54 1·6133·6
BCY 35-60SP iT4 M 2BCI 184 H35 4TNV 98 BGB 210567 × 28 × 52 2235 4 in line 3·86/4·3 3·2202·5
BCM 31-60SP iT4 M 2BCI 184 G28·8 S4S-Y362SD 204065 × 26 × 50 2231 4 in line 3·7/4·72 3·0203·3BCY 9-60SP T4 BCI 164 B M 18·6 3TNV 76 BGB 153555 × 25 × 52 158·6 3 in line 3·0/3·23 0·968·1BCY 13-60SP T4 M 1BCI 164 C12·5 3TNV 88 BGB 153555 × 25 × 52 1512·5 3 in line 3·46/3·54 1·3100·2
BCM 11-60SP T4 M 1BCI 164 C9·8 S3L2-W362SD 138052 × 21 × 50 1511 3 in line 3·07/3·62 1·280·5BCM 15-60SP iT4 M 1BCI 164 D13·3 S4L2-Y362SD 144452 × 21 × 50 1515 4 in line 3·07/3·62 1·5107·3BCM 22-60SP iT4 M 1BCI 184 E19·7 S4Q2-Y362SD 154565 × 26 × 46 1521·5 4 in line 3·46/4·06 2·2153
Mitsubishi
BCM 31-60SP M 2BCI 184 G28·8 S4S-Y262SD 204065 × 26 × 50 2231 4 in line 3·7/4·72 3·0203·3
BCM 11-60SP M 1BCI 164 C9·8 S3L2-W262SD 138052 × 21 × 50 1511 3 in line 3·07/3·62 1·280·5BCM 15-60SP M 1BCI 164 D13·3 S4L2-Y262SD 144452 × 21 × 50 1515 3·07/3·62 1·5107·3BCM 22-60SP M 1BCI 184 E19·7 S4Q2-Y262SD 154565 × 26 × 46 1521·5 4 in line 3·46/4·06 2·2153
BCJD 23-60SP iT4 M 2BCI 184 E20 4024 TF281 155565 × 26 × 53 2223 4 in line 3·4/4·1 2·2149BCJD 30-60SP iT4 M 2BCI 184 G26 4024 TF281 155565 × 26 × 53 2230 4 in line 3·4/4·1 2·79149
BCY 13-60SP M 112·5 3TNV 88 GB BCI 164 C 55 × 25 × 52 1535 1512·5 4 in line 3·46/3·54 1·2100·2
BCJD 23-60SP M 220 4024 TF270 BCI 184 E 65 × 27 × 53 1555 2223 4 in line 3·4/4·1 2·2149BCJD 30-60SP M 226 4024 TF270 BCI 184 G 65 × 27 × 53 1555 2230 4 in line 3·4/4·1 2·79149
BC C 2000 P-60 T2
BC JD 70-60 SP T3
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation, with the exception of BCL and BCY models.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 1·0 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
power generationMITSUBISHIE N G I N E S
EPA NON CERTIFIED 240/120V
Generator Designations & Definition of RatingsGenerator Model Designations All generator model designations begin with the prefix ‘BC’.The following letter(s) are used to indicate the manufacturer of the engine on which the generator is based.
For example: Lister — BCL Yanmar — BCY John Deere — BCJD Volvo — BCV Deutz — BCD Cummins — BCC Mitsubishi — BCM MTU — BCMU
For the Lister, Yanmar, Mitsubishi (Midi), John Deere, Deutz and Volvo Ranges:The next part of the designation is a number which represents the rating of the generator followed by a frequency and phase indicator thus: 60Hz 3-Phase BCXX [max standby rating in kWe]-60 60Hz Single Phase BCXX [maximum rating in kWe]-60SP
For the Cummins, Mitsubishi and MTU (large) Ranges:The next part of the designation is a number which represents the rating of the generator followed by the ‘P’ or ‘S’ indicator, followed by a frequency indicator thus: 60Hz 3-Phase Prime BCXX [prime rating in kWe]P-60 60Hz 3-Phase Standby BCXX [max standby rating in kWe]S-60
The final part of the designation indicates the appropriate level of emissions certification, if applicable. For example:
60Hz, compliant with EPA Tier 2 - T2 60Hz, compliant with EPA Tier 3 - T3
Summary for the Midi, John Deere and Volvo Ranges:
Summary for the Cummins, Mitsubishi and MTU Ranges:
8·6kW~
35kWMidi Range: 1 Phase 60Hz
Engine ManufactureJD - John Deere D - DeutzM - Mitsubishi V - Volvo
L - Lister Y - Yanmar
Frequency60Hz
PhaseSP - Single Phase
omitted for 3-Phase
Emissions LevelT2, T3 etc, or omitted
Standard Prefix
Engine ManufactureC - Cummins
M - MitsubishiMU - MTU
Frequency60Hz
For 60Hz 3-Phase Prime Prime kWe (0·8pf)For 60Hz 3-Phase Standby Max Standby kWe (0·8pf)
For 60Hz 3-Phase Max Standby kWe (0·8pf)For 60Hz Single Phase Maximum kWe (1·0pf)
P - PrimeS - Standby
Emissions LevelT2, T3 etc, or omitted
Standard Prefix
5
StandbyRating (LTP)
CanopyVersion
Genset Model Weight(Wet)
(lb)
EnclosureType
John Deere
Mitsubishi
Yanmar
Open Set Version
AlternatorModel
Engine Specifications
EngineManufacturer
M 1
John Deere
Yanmar
PrimeRating (PRP)
kWe(kVA)
EngineModel
EPA 2008 CERTIFIED 240/120V
4
Dimensions(L × W × H)
(in)
Fuel TankCapacity(US gal)
15
kWe(kVA)
CylinderArrangement
4 in line
Bore/Stroke
(in)
Fuel Cons100% Load(US gal/hr)
Cubic Capacity
(in3)
BCY 18-60SP iT4 M 1BCI 184 E18 4TNV 88 BGB 155055 × 25 × 52 1518 4 in line 3·46/3·54 1·7133·6
BCY 18-60SP M 1BCI 184 E18 4TNV 88 GB 155055 × 25 × 52 1518 4 in line 3·46/3·54 1·6133·6
BCY 35-60SP iT4 M 2BCI 184 H35 4TNV 98 BGB 210567 × 28 × 52 2235 4 in line 3·86/4·3 3·2202·5
BCM 31-60SP iT4 M 2BCI 184 G28·8 S4S-Y362SD 204065 × 26 × 50 2231 4 in line 3·7/4·72 3·0203·3BCY 9-60SP T4 BCI 164 B M 18·6 3TNV 76 BGB 153555 × 25 × 52 158·6 3 in line 3·0/3·23 0·968·1BCY 13-60SP T4 M 1BCI 164 C12·5 3TNV 88 BGB 153555 × 25 × 52 1512·5 3 in line 3·46/3·54 1·3100·2
BCM 11-60SP T4 M 1BCI 164 C9·8 S3L2-W362SD 138052 × 21 × 50 1511 3 in line 3·07/3·62 1·280·5BCM 15-60SP iT4 M 1BCI 164 D13·3 S4L2-Y362SD 144452 × 21 × 50 1515 4 in line 3·07/3·62 1·5107·3BCM 22-60SP iT4 M 1BCI 184 E19·7 S4Q2-Y362SD 154565 × 26 × 46 1521·5 4 in line 3·46/4·06 2·2153
Mitsubishi
BCM 31-60SP M 2BCI 184 G28·8 S4S-Y262SD 204065 × 26 × 50 2231 4 in line 3·7/4·72 3·0203·3
BCM 11-60SP M 1BCI 164 C9·8 S3L2-W262SD 138052 × 21 × 50 1511 3 in line 3·07/3·62 1·280·5BCM 15-60SP M 1BCI 164 D13·3 S4L2-Y262SD 144452 × 21 × 50 1515 3·07/3·62 1·5107·3BCM 22-60SP M 1BCI 184 E19·7 S4Q2-Y262SD 154565 × 26 × 46 1521·5 4 in line 3·46/4·06 2·2153
BCJD 23-60SP iT4 M 2BCI 184 E20 4024 TF281 155565 × 26 × 53 2223 4 in line 3·4/4·1 2·2149BCJD 30-60SP iT4 M 2BCI 184 G26 4024 TF281 155565 × 26 × 53 2230 4 in line 3·4/4·1 2·79149
BCY 13-60SP M 112·5 3TNV 88 GB BCI 164 C 55 × 25 × 52 1535 1512·5 4 in line 3·46/3·54 1·2100·2
BCJD 23-60SP M 220 4024 TF270 BCI 184 E 65 × 27 × 53 1555 2223 4 in line 3·4/4·1 2·2149BCJD 30-60SP M 226 4024 TF270 BCI 184 G 65 × 27 × 53 1555 2230 4 in line 3·4/4·1 2·79149
BC C 2000 P-60 T2
BC JD 70-60 SP T3
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation, with the exception of BCL and BCY models.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 1·0 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
power generationMITSUBISHIE N G I N E S
EPA NON CERTIFIED 240/120V
Genset Model EngineModel
Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel TankCapacity
CubicCapacity
(in3)
Open Set VersionEngine Specifications
EngineManufacturer
Bore/Stroke
(in)
EPA 2008 CERTIFIED 220/127V, 480/277V
11·4kW~
30kWMidi Range: 3 Phase 60Hz
8·8kW~
35·2kWMidi Range: 3 Phase 60Hz
BCJD 30-60 iT4 27·2 34 30·4 38 4024 TF281 BCI 184 G M 2
M 1
BCM 15-60 iT4 13·6 16·9 15·2 19 S4L2-Y362SD 3·07/3·62 107·3 BCI 164 D M 1
BCM 22-60 iT4 20 25 21·8 27·2 S4Q2-Y362SD 3·46/4·06 153 BCI 184 E M 1
BCM 31-60 iT4 28 35 29·6 37 S4S-Y362SD 3·7/4·72 203·3 BCI 184 G M 2
M 1
BCY 13-60 T4 12·8 16 3TNV 88 BGB 3·46/3·54 100·2 BCI 164 C M 1
BCY 18-60 iT4 18 22·5 4TNV 88 BGB 3·46/3·54 133·6 BCI 184 E M 1
BCY 35-60 iT4 35·2 44 4TNV 98 BGB BCI 184 H M 2
BCJD 23-60 iT4 20 25 23 28·8 4024 TF281 BCI 184 E M 2John Deere
BCM 11-60 T4 10 12·5 11·4 14·2 S3L2-W362SD 3·07/3·62 80·5 BCI 164 C
Mitsubishi
BCY 9-60 T4 8·8
12·8
18
35·2
8·811
16
22·5
44
11 3TNV 76 BGB BCI 164 B
Yanmar
Genset Model EngineModel
CylinderArrangement
Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel TankCapacity(US gal)
Cubic Capacity
(in3)
Open Set VersionEngine Specifications
EngineManufacturer
Fuel Cons100% Load(US gal/hr)
EPA 2008 NON CERTIFIED
kWe kVA kWe kVA
PrimeRating (PRP)
StandbyRating (LTP)
6 7
John Deere
CylinderArrangement
kWe kVA kWe kVA
PrimeRating (PRP)
StandbyRating (LTP)
4 in line
4 in line
3 in line
4 in line
4 in line
4 in line
3 in line
3 in line
4 in line
4 in line
3·4/4·1
3·4/4·1
149
149
65 × 27 × 53
65 × 27 × 53
52 × 21 × 49
52 × 21 × 49
65 × 26 × 46
65 × 26 × 49
55 × 25 × 52
55 × 25 × 52
55 × 25 × 52
67 × 28 × 52
3·0/3·23 68·1
3·86/4·3 202·5
Fuel Cons100% Load(US gal/hr)
1·5
2·2
3·0
1·3
1·7
1·2
2·2
2·79
0·9
3·2
1553 22
1553 22
1380 15
1445 15
1545 15
2040 22
Mitsubishi
M 1BCM 11-60 10 12·5 11·4 14·2 S3L2-W262SD 3·07/3·62 80·5 BCI 164 C3 in line 52 × 21 × 491·2 1380 15
BCM 15-60 13·5 16·9 15·2 19 S4L2-Y262SD 3·07/3·62 107·3 BCI 164 D M 14 in line 52 × 21 × 491·5 1445 15
BCM 22-60 20 25 21·8 27·2 S4Q2-Y262SD 3·46/4·06 153 BCI 184 E M 14 in line 65 × 26 × 462·2 1545 15
BCM 31-60 28 35 29·6 37 S4S-Y262SD 3·7/4·72 203·3 BCI 184 G M 24 in line 65 × 26 × 493·0 2040 22
1535 15
1535 15
1550 15
2105 22
BCJD 23-60 20 25 22 27·5 4024 TF270 BCI 184 E M 24 in line 3·4/4·1 149 2·2 65 × 26 × 53 1553 22
BCJD 30-60 27·2 34 30 37·5 4024 TF270 BCI 184 G M 24 in line 3·4/4·1 149 2·8 65 × 26 × 53 1553 22
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation, with the exception of BCL and BCY models.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation, with the exception of BCL and BCY models.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
Bore/Stroke
(in)
CanopyVersion
EnclosureType
AlternatorModel
CanopyVersion
EnclosureType
AlternatorModel
power generationMITSUBISHIE N G I N E S power generation
220/127V, 480/277V
YanmarBCY 13-60 12·8 16 3TNV 88 GB 3·46/3·54 100·2 BCI 164 C M 112·8 16 4 in line 55 × 25 × 521·2 1535 15
BCY 18-60 18 22·5 4TNV 88 GB 3·46/3·54 133·6 BCI 184 E M 118 22·5 4 in line 55 × 25 × 521·6 1550 15
Genset Model EngineModel
Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel TankCapacity
CubicCapacity
(in3)
Open Set VersionEngine Specifications
EngineManufacturer
Bore/Stroke
(in)
EPA 2008 CERTIFIED 220/127V, 480/277V
11·4kW~
30kWMidi Range: 3 Phase 60Hz
8·8kW~
35·2kWMidi Range: 3 Phase 60Hz
BCJD 30-60 iT4 27·2 34 30·4 38 4024 TF281 BCI 184 G M 2
M 1
BCM 15-60 iT4 13·6 16·9 15·2 19 S4L2-Y362SD 3·07/3·62 107·3 BCI 164 D M 1
BCM 22-60 iT4 20 25 21·8 27·2 S4Q2-Y362SD 3·46/4·06 153 BCI 184 E M 1
BCM 31-60 iT4 28 35 29·6 37 S4S-Y362SD 3·7/4·72 203·3 BCI 184 G M 2
M 1
BCY 13-60 T4 12·8 16 3TNV 88 BGB 3·46/3·54 100·2 BCI 164 C M 1
BCY 18-60 iT4 18 22·5 4TNV 88 BGB 3·46/3·54 133·6 BCI 184 E M 1
BCY 35-60 iT4 35·2 44 4TNV 98 BGB BCI 184 H M 2
BCJD 23-60 iT4 20 25 23 28·8 4024 TF281 BCI 184 E M 2John Deere
BCM 11-60 T4 10 12·5 11·4 14·2 S3L2-W362SD 3·07/3·62 80·5 BCI 164 C
Mitsubishi
BCY 9-60 T4 8·8
12·8
18
35·2
8·811
16
22·5
44
11 3TNV 76 BGB BCI 164 B
Yanmar
Genset Model EngineModel
CylinderArrangement
Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel TankCapacity(US gal)
Cubic Capacity
(in3)
Open Set VersionEngine Specifications
EngineManufacturer
Fuel Cons100% Load(US gal/hr)
EPA 2008 NON CERTIFIED
kWe kVA kWe kVA
PrimeRating (PRP)
StandbyRating (LTP)
6 7
John Deere
CylinderArrangement
kWe kVA kWe kVA
PrimeRating (PRP)
StandbyRating (LTP)
4 in line
4 in line
3 in line
4 in line
4 in line
4 in line
3 in line
3 in line
4 in line
4 in line
3·4/4·1
3·4/4·1
149
149
65 × 27 × 53
65 × 27 × 53
52 × 21 × 49
52 × 21 × 49
65 × 26 × 46
65 × 26 × 49
55 × 25 × 52
55 × 25 × 52
55 × 25 × 52
67 × 28 × 52
3·0/3·23 68·1
3·86/4·3 202·5
Fuel Cons100% Load(US gal/hr)
1·5
2·2
3·0
1·3
1·7
1·2
2·2
2·79
0·9
3·2
1553 22
1553 22
1380 15
1445 15
1545 15
2040 22
Mitsubishi
M 1BCM 11-60 10 12·5 11·4 14·2 S3L2-W262SD 3·07/3·62 80·5 BCI 164 C3 in line 52 × 21 × 491·2 1380 15
BCM 15-60 13·5 16·9 15·2 19 S4L2-Y262SD 3·07/3·62 107·3 BCI 164 D M 14 in line 52 × 21 × 491·5 1445 15
BCM 22-60 20 25 21·8 27·2 S4Q2-Y262SD 3·46/4·06 153 BCI 184 E M 14 in line 65 × 26 × 462·2 1545 15
BCM 31-60 28 35 29·6 37 S4S-Y262SD 3·7/4·72 203·3 BCI 184 G M 24 in line 65 × 26 × 493·0 2040 22
1535 15
1535 15
1550 15
2105 22
BCJD 23-60 20 25 22 27·5 4024 TF270 BCI 184 E M 24 in line 3·4/4·1 149 2·2 65 × 26 × 53 1553 22
BCJD 30-60 27·2 34 30 37·5 4024 TF270 BCI 184 G M 24 in line 3·4/4·1 149 2·8 65 × 26 × 53 1553 22
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation, with the exception of BCL and BCY models.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation, with the exception of BCL and BCY models.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
Bore/Stroke
(in)
CanopyVersion
EnclosureType
AlternatorModel
CanopyVersion
EnclosureType
AlternatorModel
power generationMITSUBISHIE N G I N E S power generation
220/127V, 480/277V
YanmarBCY 13-60 12·8 16 3TNV 88 GB 3·46/3·54 100·2 BCI 164 C M 112·8 16 4 in line 55 × 25 × 521·2 1535 15
BCY 18-60 18 22·5 4TNV 88 GB 3·46/3·54 133·6 BCI 184 E M 118 22·5 4 in line 55 × 25 × 521·6 1550 15
PrimeRating (PRP)
StandbyRating (LTP)
Genset Model EngineModel
Fuel TankCapacity(US gal)
kWe(kVA)
kWe(kVA)
Open Set VersionEngine Specifications
Fuel Cons100% Load(US gal/hr)
EPA 2008 CERTIFIED
23kW~
100kWJohn Deere
Range: 1 Phase 60Hz
BCJD 40-60SP T2 36 40 3029 TF270 3 in line 4·19/4·33 3·5 BCI 184 J C 1
BCJD 50-60SP T2 45 50 5030 TF270 5 in line 3·4/4·10 4·4 UCI 224 E C 1+
BCJD 60-60SP T2 54 60 5030 HF270 5 in line 3·4/4·10 5·0 UCI 224 F C 1
BCJD 50-60SP T3 45 50 4045 HF285 4 in line 4·19/5·0 4·3 UCI 224 E
BCJD 60-60SP T3 54 60 5030 HF285 5 in line 3·4/4·10 5·0 UCI 224 F C 2+
BCJD 77-60SP T3 70 77 4045 HF285 4 in line 4·19/5·0 6·6 UCI 224 G
BCJD 100-60SP T3 90 100 4045 HF285 4 in line 4·19/5·0 8·2 UCI 274 C C 2+
BCJD 40-60SP 35 40 3029 TF158 3 in line 4·19/4·33 3·3 BCI 184 J C 1
BCJD 58-60SP 50 57 4039 TF008 4 in line 4·19/4·33 4·3 UCI 224 E C 2
BCJD 65-60SP 60 65 4039 TF008 4 in line 4·19/4·33 5·2 UCI 224 F C 2
BCJD 80-60SP 72 80 4045 TF258 4 in line 4·19/5·0 6·1 UCI 224 G C 2
BCJD 100-60SP 90 100 4045 HF158 4 in line 4·19/5.0
CubicCapacity
(in3)
177
186
186
276
186
276
276
177
239
239
276
276 7·9 UCI 274 C C 2
Genset Model Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel TankCapacity(US gal)
Cubic Capacity
(in3)
Open Set VersionEngine Specifications
Fuel Cons100% Load(US gal/hr)
EPA 2008 CERTIFIED
BCJD 50-60 T2 46 57 51 64 186 4·4 C 1+
BCJD 62-60 T2 56 70 62 75 186 5·0 C 2
BCJD 80-60 T3 72 90 80 100 276 6·6 C 2+
BCJD 100-60 T3 90 113 100 126 276 8·2 C 2+
BCJD 155-60 T3 140 175 155 194 414 11·8 C 3
BCJD 200-60 T3 190 238 200 250 414 15·5 C 4
BCJD 250-60 T3 224 280 250 313 549 18·0 C 4 A
BCJD 275-60 T3 250 313 275 344 549 20·2 C 4 A
BCJD 350-60 T3 320 400 350 438 824 26·3 C 6
EngineModel
5030 TF270
5030 HF285
4045 HF285
4045 HF285
6068 HF285
6068 HF485
6090 HF485
6090 HF485
6135 HF485
3·4/4·1
3·4/4·1
4·19/5·0
4·19/5·0
4·19/5.0
4·19/5·0
4·66/5·35
4·66/5·35
5·2/6·5
UCI 224 D
UCI 224 F
UCI 224 G
UCI 274 C
UCI 274 F
UCI 274 H
UCDI 274 K
HCI 444 D
HCI 444 E
40kW~
405kWJohn Deere
Range: 3 Phase 60Hz
8 9
CylinderArrangement
5 in line
5 in line
4 in line
4 in line
6 in line
6 in line
6 in line
6 in line
6 in line
CylinderArrangement
kWe kVA kWe kVA
PrimeRating (PRP)
StandbyRating (LTP)
Dimensions(L × W × H)
(in)
82 × 27 × 56
82 × 27 × 56
90 × 34 × 58
90 × 36 × 57
90 × 36 × 60
90 × 36 × 57
90 × 34 × 62
84 × 27 × 54
83 × 27 × 55
82 × 27 × 55
90 × 34 × 57
90 × 34 × 57
Weight(Wet)
(lb)
1920
2130
2282
2830
2260
2830
2855
1900
2470
2558
2855
2866
41
41
41
41
59
59
C 2
C 2+
59
41
41
BCJD 23-60SP 21 23 3029 DF128 3 in line 4·19/4·33 2·0 BCI 184 E C 1
BCJD 28-60SP 25 27·5 3029 DF128 3 in line 4·19/4·33 2·4 BCI 184 F C 1
177
177
85 × 34 × 54
85 × 34 × 54
1785
1830
22
22
59
BCJD 58-60SP 50 57 4045 TF158 4 in line 4·19/5·0 4·4 UCI 224 E C 2
BCJD 65-60SP 60 65 4045 TF158 4 in line 4·19/5·0 5·4 UCI 224 F C 2
276
276
90 × 34 × 57
90 × 34 × 57
2855
2855
59
59
59
59
BCJD 40-60 T2 37 46 40 50 177 3·5 C 13029 TF270 4·19/4·33 BCI 184 J3 in line 82 × 27 × 56 1920 41
82 × 27 × 56 2030 41
BCJD 50-60 T3 46 57 50 63 146 4·2 C 14024 HF285 3·4/4·1 UCI 224 D4 in line 82 × 27 × 56 2030 41
BCJD 60-60 T3 55 69 60 75 186 5·0 C 2+5030 HF285 3·4/4·1 UCI 224 F5 in line 90 × 34 × 58 2030 59
90 × 34 × 58 2030 59
90 × 34 × 62 2830 59
90 × 34 × 57 2830 59
107 × 32 × 64 4012 66
107 × 32 × 64 4012 66
133 × 53 × 79 8155 92
133 × 53 × 79 8158 172
135 × 50 × 90 8820 225
BCJD 405-60 T3 368 460 405 506 6135 HF485 5·2/6·5 824 30·3 HCI 444 F C 66 in line 135 × 50 × 90 8820 225
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 1·0 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
EPA 2008 NON CERTIFIED
Bore/Stroke
(in)
CanopyVersion
EnclosureType
AlternatorModel
Bore/Stroke
(in)
CanopyVersion
EnclosureType
AlternatorModel
power generation
240/120V
240/120V
220/127V, 480/277V
power generation
PrimeRating (PRP)
StandbyRating (LTP)
Genset Model EngineModel
Fuel TankCapacity(US gal)
kWe(kVA)
kWe(kVA)
Open Set VersionEngine Specifications
Fuel Cons100% Load(US gal/hr)
EPA 2008 CERTIFIED
23kW~
100kWJohn Deere
Range: 1 Phase 60Hz
BCJD 40-60SP T2 36 40 3029 TF270 3 in line 4·19/4·33 3·5 BCI 184 J C 1
BCJD 50-60SP T2 45 50 5030 TF270 5 in line 3·4/4·10 4·4 UCI 224 E C 1+
BCJD 60-60SP T2 54 60 5030 HF270 5 in line 3·4/4·10 5·0 UCI 224 F C 1
BCJD 50-60SP T3 45 50 4045 HF285 4 in line 4·19/5·0 4·3 UCI 224 E
BCJD 60-60SP T3 54 60 5030 HF285 5 in line 3·4/4·10 5·0 UCI 224 F C 2+
BCJD 77-60SP T3 70 77 4045 HF285 4 in line 4·19/5·0 6·6 UCI 224 G
BCJD 100-60SP T3 90 100 4045 HF285 4 in line 4·19/5·0 8·2 UCI 274 C C 2+
BCJD 40-60SP 35 40 3029 TF158 3 in line 4·19/4·33 3·3 BCI 184 J C 1
BCJD 58-60SP 50 57 4039 TF008 4 in line 4·19/4·33 4·3 UCI 224 E C 2
BCJD 65-60SP 60 65 4039 TF008 4 in line 4·19/4·33 5·2 UCI 224 F C 2
BCJD 80-60SP 72 80 4045 TF258 4 in line 4·19/5·0 6·1 UCI 224 G C 2
BCJD 100-60SP 90 100 4045 HF158 4 in line 4·19/5.0
CubicCapacity
(in3)
177
186
186
276
186
276
276
177
239
239
276
276 7·9 UCI 274 C C 2
Genset Model Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel TankCapacity(US gal)
Cubic Capacity
(in3)
Open Set VersionEngine Specifications
Fuel Cons100% Load(US gal/hr)
EPA 2008 CERTIFIED
BCJD 50-60 T2 46 57 51 64 186 4·4 C 1+
BCJD 62-60 T2 56 70 62 75 186 5·0 C 2
BCJD 80-60 T3 72 90 80 100 276 6·6 C 2+
BCJD 100-60 T3 90 113 100 126 276 8·2 C 2+
BCJD 155-60 T3 140 175 155 194 414 11·8 C 3
BCJD 200-60 T3 190 238 200 250 414 15·5 C 4
BCJD 250-60 T3 224 280 250 313 549 18·0 C 4 A
BCJD 275-60 T3 250 313 275 344 549 20·2 C 4 A
BCJD 350-60 T3 320 400 350 438 824 26·3 C 6
EngineModel
5030 TF270
5030 HF285
4045 HF285
4045 HF285
6068 HF285
6068 HF485
6090 HF485
6090 HF485
6135 HF485
3·4/4·1
3·4/4·1
4·19/5·0
4·19/5·0
4·19/5.0
4·19/5·0
4·66/5·35
4·66/5·35
5·2/6·5
UCI 224 D
UCI 224 F
UCI 224 G
UCI 274 C
UCI 274 F
UCI 274 H
UCDI 274 K
HCI 444 D
HCI 444 E
40kW~
405kWJohn Deere
Range: 3 Phase 60Hz
8 9
CylinderArrangement
5 in line
5 in line
4 in line
4 in line
6 in line
6 in line
6 in line
6 in line
6 in line
CylinderArrangement
kWe kVA kWe kVA
PrimeRating (PRP)
StandbyRating (LTP)
Dimensions(L × W × H)
(in)
82 × 27 × 56
82 × 27 × 56
90 × 34 × 58
90 × 36 × 57
90 × 36 × 60
90 × 36 × 57
90 × 34 × 62
84 × 27 × 54
83 × 27 × 55
82 × 27 × 55
90 × 34 × 57
90 × 34 × 57
Weight(Wet)
(lb)
1920
2130
2282
2830
2260
2830
2855
1900
2470
2558
2855
2866
41
41
41
41
59
59
C 2
C 2+
59
41
41
BCJD 23-60SP 21 23 3029 DF128 3 in line 4·19/4·33 2·0 BCI 184 E C 1
BCJD 28-60SP 25 27·5 3029 DF128 3 in line 4·19/4·33 2·4 BCI 184 F C 1
177
177
85 × 34 × 54
85 × 34 × 54
1785
1830
22
22
59
BCJD 58-60SP 50 57 4045 TF158 4 in line 4·19/5·0 4·4 UCI 224 E C 2
BCJD 65-60SP 60 65 4045 TF158 4 in line 4·19/5·0 5·4 UCI 224 F C 2
276
276
90 × 34 × 57
90 × 34 × 57
2855
2855
59
59
59
59
BCJD 40-60 T2 37 46 40 50 177 3·5 C 13029 TF270 4·19/4·33 BCI 184 J3 in line 82 × 27 × 56 1920 41
82 × 27 × 56 2030 41
BCJD 50-60 T3 46 57 50 63 146 4·2 C 14024 HF285 3·4/4·1 UCI 224 D4 in line 82 × 27 × 56 2030 41
BCJD 60-60 T3 55 69 60 75 186 5·0 C 2+5030 HF285 3·4/4·1 UCI 224 F5 in line 90 × 34 × 58 2030 59
90 × 34 × 58 2030 59
90 × 34 × 62 2830 59
90 × 34 × 57 2830 59
107 × 32 × 64 4012 66
107 × 32 × 64 4012 66
133 × 53 × 79 8155 92
133 × 53 × 79 8158 172
135 × 50 × 90 8820 225
BCJD 405-60 T3 368 460 405 506 6135 HF485 5·2/6·5 824 30·3 HCI 444 F C 66 in line 135 × 50 × 90 8820 225
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 1·0 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
EPA 2008 NON CERTIFIED
Bore/Stroke
(in)
CanopyVersion
EnclosureType
AlternatorModel
Bore/Stroke
(in)
CanopyVersion
EnclosureType
AlternatorModel
power generation
240/120V
240/120V
220/127V, 480/277V
power generation
22kW~
416kWJohn Deere
Range: 3 Phase 60Hz
Genset Model Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel TankCapacity(US gal)
Open Set VersionEngine Specifications
EPA 2008 NON CERTIFIED
250kW~
600kWVolvo
Range: 3 Phase 60Hz
BCJD 40-60 37 46 40 50 3 in line BCI 184 J C 1
BCJD 66-60 60 75 66 82 4 in line UCI 224 F C 2
BCJD 80-60 72 90 80 100 4 in line UCI 224 G C 2
BCJD 100-60 92 115 100 125 4 in line UCI 274 C C 2
BCJD 125-60 112 140 125 156 6 in line UCI 274 E C 3
BCJD 150-60 140 175 150 188 6 in line UCI 274 F C 3
BCJD 190-60 170 213 190 238 6 in line UCI 274 H C 3
BCJD 225-60 192 240 225 281 6 in line UCDI 274 J C 4
BCJD 250-60 224 280 250 313 6 in line UCDI 274 K C 4
BCJD 310-60 280 350 310 388 6 in line HCI 444 D C 5
BCJD 416-60 376 470 416 520 6 in line
4.19/4.33
4.19/4.33
4.19/5.0
4.19/5.0
4.19/5.0
4.19/5.0
4.19/5.0
4.56/5.06
4.56/5.06
5.0/6.5
5.0/6.5
CubicCapacity
(in3)
177
239
276
276
276
414
414
496
496
763
763
Fuel Cons100% Load(US gal/hr)
3.3
5.2
6.1
7.9
9.3
12.2
13.7
16.4
19.5
24.6
31.2 HCI 444 F C 5
Genset Model EngineModel
Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel TankCapacity(US gal)
Cubic Capacity
(in3)
Open Set VersionEngine Specifications
Fuel Cons100% Load(US gal/hr)
EPA 2008 CERTIFIED
EPA 2008 NON CERTIFIED
BCV 250-60 T3 228 285 250 313 TAD1350GE 5.16/6.22 779.7 18.6 HCI 444 C C 5*
BCV 300-60 T3 275 334 300 375 TAD1351GE 5.16/6.22 779.7 21.8 HCI 444 D C 5*
BCV 350-60 T3 320 400 350 438 TAD1352GE 5.16/6.22 779.7 25.4 HCI 444 E C 5*
BCV 450-60 400 500 450 563 TAD1640GE 5.67/6.5 983.7 31.5 HCI 544 C C 6
10 11
3029 TF158
4039 TF008
4045 TF258
4045 HF158
6068 TF258
6068 HF158
6068 HF258
6081 HF001
6081 HF001
6125 HF070
6125 HF070
EngineModel
CylinderArrangement
kWe kVA kWe kVA
PrimeRating (PRP)
StandbyRating (LTP)
6 in line
6 in line
6 in line
6 in line
CylinderArrangement
kWe kVA kWe kVA
PrimeRating (PRP)
StandbyRating (LTP)
82 × 27 × 56 1920 41
82 × 27 × 55 2558 41
BCJD 70-60 65 81 70 65 4 in line UCI 224 F C 24.19/5.0 276 5.44045 TF158 90 × 34 × 57 2855 59
BCJD 22-60 22 27 22 27 3 in line BCI 184 E C 1
BCJD 28-60 26 32 28 35 3 in line BCI 184 F C 1
4.19/4.33
4.19/4.33
177
177
1.9
2.4
3029 DF128
3029 DF128
65 × 34 × 54 1785 22
65 × 34 × 54 1830 22
90 × 34 × 57 2855 59
90 × 34 × 57 2866 59
107 × 32 × 59 3715 66
107 × 32 × 64 3915 66
107 × 32 × 64 4012 66
121 × 43 × 71 5215 92
121 × 43 × 71 5545 92
133 × 46 × 84 7736 172
133 × 46 × 84 8177 172
140 × 50 × 75*
140 × 50 × 75*
140 × 50 × 75*
143 × 50 × 85
7500*
7715*
8200*
159*
159*
190*
BCV 400-60 T3 360 450 400 500 TAD1353GE 5.16/6.22 779.7 27.8 HCI 444 F C 5*6 in line 140 × 50 × 75* 8200* 190*
BCV 500-60 T2 450 563 500 625 TAD1641GE 5.67/6.5 983.7 36.7 HCI 544 D C 6
BCV 550-60 T2 500 625 550 688 TAD1642GE 5.67/6.5 983.7 39.7 HCI 544 E C 6
BCV 600-60 T2 555 694 600 750 TWD1643GE 5.67/6.5 983.7 42.6 HCI 544 E C 7
6 in line
6 in line
6 in line
152 × 50 × 86
152 × 50 × 86
153 × 60 × 85
11155
11155
10440
188
190
225
10445
BCV 250-60 228 285 250 313 TAD940GE 4.72/5.43 571.4 18.6 HCI 444 C6 in line 130 × 47 × 72 7595 159* C 4A
BCV 300-60 275 344 300 375 TAD941GE 4.72/5.43 571.4 22.5 HCI 444 D6 in line 130 × 47 × 72 7595 159* C 4A
BCV 360-60 325 406 360 450 TAD1241GE 5.16/5.91 740.2 25.6 HCI 444 E6 in line 140 × 50 × 75 8200 190* C 5*
BCV 400-60 360 450 400 500 TAD1242GE 5.16/5.91 740.2 29.5 HCI 444 F6 in line 140 × 50 × 75 8200 190* C 5*
224
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. Specifications and design subject to change without notice.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. Specifications and design subject to change without notice.
power generation
Bore/Stroke
(in)
CanopyVersion
EnclosureType
AlternatorModel
Bore/Stroke
(in)
CanopyVersion
EnclosureType
AlternatorModel
power generation
220/127V, 480/277V 220/127V, 480/277V
220/127V, 480/277V
* Provisional
22kW~
416kWJohn Deere
Range: 3 Phase 60Hz
Genset Model Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel TankCapacity(US gal)
Open Set VersionEngine Specifications
EPA 2008 NON CERTIFIED
250kW~
600kWVolvo
Range: 3 Phase 60Hz
BCJD 40-60 37 46 40 50 3 in line BCI 184 J C 1
BCJD 66-60 60 75 66 82 4 in line UCI 224 F C 2
BCJD 80-60 72 90 80 100 4 in line UCI 224 G C 2
BCJD 100-60 92 115 100 125 4 in line UCI 274 C C 2
BCJD 125-60 112 140 125 156 6 in line UCI 274 E C 3
BCJD 150-60 140 175 150 188 6 in line UCI 274 F C 3
BCJD 190-60 170 213 190 238 6 in line UCI 274 H C 3
BCJD 225-60 192 240 225 281 6 in line UCDI 274 J C 4
BCJD 250-60 224 280 250 313 6 in line UCDI 274 K C 4
BCJD 310-60 280 350 310 388 6 in line HCI 444 D C 5
BCJD 416-60 376 470 416 520 6 in line
4.19/4.33
4.19/4.33
4.19/5.0
4.19/5.0
4.19/5.0
4.19/5.0
4.19/5.0
4.56/5.06
4.56/5.06
5.0/6.5
5.0/6.5
CubicCapacity
(in3)
177
239
276
276
276
414
414
496
496
763
763
Fuel Cons100% Load(US gal/hr)
3.3
5.2
6.1
7.9
9.3
12.2
13.7
16.4
19.5
24.6
31.2 HCI 444 F C 5
Genset Model EngineModel
Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel TankCapacity(US gal)
Cubic Capacity
(in3)
Open Set VersionEngine Specifications
Fuel Cons100% Load(US gal/hr)
EPA 2008 CERTIFIED
EPA 2008 NON CERTIFIED
BCV 250-60 T3 228 285 250 313 TAD1350GE 5.16/6.22 779.7 18.6 HCI 444 C C 5*
BCV 300-60 T3 275 334 300 375 TAD1351GE 5.16/6.22 779.7 21.8 HCI 444 D C 5*
BCV 350-60 T3 320 400 350 438 TAD1352GE 5.16/6.22 779.7 25.4 HCI 444 E C 5*
BCV 450-60 400 500 450 563 TAD1640GE 5.67/6.5 983.7 31.5 HCI 544 C C 6
10 11
3029 TF158
4039 TF008
4045 TF258
4045 HF158
6068 TF258
6068 HF158
6068 HF258
6081 HF001
6081 HF001
6125 HF070
6125 HF070
EngineModel
CylinderArrangement
kWe kVA kWe kVA
PrimeRating (PRP)
StandbyRating (LTP)
6 in line
6 in line
6 in line
6 in line
CylinderArrangement
kWe kVA kWe kVA
PrimeRating (PRP)
StandbyRating (LTP)
82 × 27 × 56 1920 41
82 × 27 × 55 2558 41
BCJD 70-60 65 81 70 65 4 in line UCI 224 F C 24.19/5.0 276 5.44045 TF158 90 × 34 × 57 2855 59
BCJD 22-60 22 27 22 27 3 in line BCI 184 E C 1
BCJD 28-60 26 32 28 35 3 in line BCI 184 F C 1
4.19/4.33
4.19/4.33
177
177
1.9
2.4
3029 DF128
3029 DF128
65 × 34 × 54 1785 22
65 × 34 × 54 1830 22
90 × 34 × 57 2855 59
90 × 34 × 57 2866 59
107 × 32 × 59 3715 66
107 × 32 × 64 3915 66
107 × 32 × 64 4012 66
121 × 43 × 71 5215 92
121 × 43 × 71 5545 92
133 × 46 × 84 7736 172
133 × 46 × 84 8177 172
140 × 50 × 75*
140 × 50 × 75*
140 × 50 × 75*
143 × 50 × 85
7500*
7715*
8200*
159*
159*
190*
BCV 400-60 T3 360 450 400 500 TAD1353GE 5.16/6.22 779.7 27.8 HCI 444 F C 5*6 in line 140 × 50 × 75* 8200* 190*
BCV 500-60 T2 450 563 500 625 TAD1641GE 5.67/6.5 983.7 36.7 HCI 544 D C 6
BCV 550-60 T2 500 625 550 688 TAD1642GE 5.67/6.5 983.7 39.7 HCI 544 E C 6
BCV 600-60 T2 555 694 600 750 TWD1643GE 5.67/6.5 983.7 42.6 HCI 544 E C 7
6 in line
6 in line
6 in line
152 × 50 × 86
152 × 50 × 86
153 × 60 × 85
11155
11155
10440
188
190
225
10445
BCV 250-60 228 285 250 313 TAD940GE 4.72/5.43 571.4 18.6 HCI 444 C6 in line 130 × 47 × 72 7595 159* C 4A
BCV 300-60 275 344 300 375 TAD941GE 4.72/5.43 571.4 22.5 HCI 444 D6 in line 130 × 47 × 72 7595 159* C 4A
BCV 360-60 325 406 360 450 TAD1241GE 5.16/5.91 740.2 25.6 HCI 444 E6 in line 140 × 50 × 75 8200 190* C 5*
BCV 400-60 360 450 400 500 TAD1242GE 5.16/5.91 740.2 29.5 HCI 444 F6 in line 140 × 50 × 75 8200 190* C 5*
224
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. Specifications and design subject to change without notice.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. Specifications and design subject to change without notice.
power generation
Bore/Stroke
(in)
CanopyVersion
EnclosureType
AlternatorModel
Bore/Stroke
(in)
CanopyVersion
EnclosureType
AlternatorModel
power generation
220/127V, 480/277V 220/127V, 480/277V
220/127V, 480/277V
* Provisional
600kW~
2000kWCummins
Range: 3 Phase 60Hz
ContainerVersion
Genset Model EngineModel
CylinderArrangement
Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel Tank*Capacity(US gal)
EnclosureType
Open Set VersionEngine Specifications
Fuel Cons100% Load(US gal/hr)
EPA 2008 CERTIFIEDRating
600kW~
2000kWCummins
Range: 3 Phase 60Hz
BCC 550P-60 T2 QSK 19 G3 6 in line 40.9
BCC 600S-60 T2 QSK 19 G3 6 in line 45.4
BCC 725P-60 T2 QSK 23 G7 6 in line 50
BCC 800S-60 T2 QSK 23 G7 6 in line 56
BCC 550P-60 T2 QSK 19 G3 6 in line 40.9
BCC 600S-60 T2 QSK 19 G3 6 in line 45.4
BCC 725P-60 T2 QSK 23 G7 6 in line 50
BCC 800S-60 T2 QSK 23 G7 6 in line 56
BCC 910P-60 T2 QST 30 G5 12 Vee 63.4
BCC 1000S-60 T2 QST 30 G5 12 Vee 70.5
BCC 1365P-60 T2 QSK 50 G4 16 Vee 96.7
BCC 1500S-60 T2 QSK 50 G4 16 Vee 109.6
BCC 1825P-60 T2 QSK 60 G12 16 Vee 129
BCC 2000S-60 T2
Prime (PRP)or Standby
(LTP)
PRP
LTP
PRP
LTP
PRP
LTP
PRP
LTP
PRP
LTP
PRP
LTP
PRP
LTP
kWe
550
600
725
800
550
600
725
800
910
1000
1365
1500
1825
2000
kVA
688
750
906
1000
688
750
906
1000
1138
1250
1706
1875
2281
2500 QSK 60 G12 16 Vee
Bore/Stroke
(in)
6.26/6.26
6.26/6.26
6.69/6.69
6.69/6.69
6.25/6.25
6.25/6.25
6.69/6.69
6.69/6.69
5.51/6.5
5.51/6.5
6.25/6.25
6.25/6.25
6.25/7.48
6.25/7.48
CubicCapacity
(in3)
1159
1159
1413
1413
1159
1159
1413
1413
1860
1860
3070
3070
3673
3673 142
HCI 534 E
HCI 534 E
HCI 634 G
HCI 634 G
HCI 534 E
HCI 534 E
HCI 634 G
HCI 634 G
HCI 634 J
HCI 634 J
PI 734 C
PI 734 C
PI 734 F
PI 734 F
ContainerVersion
Genset Model EngineModel
CylinderArrangement
Dimensions(L × W × H)
(in)
Weight(Wet) (lb)
Cubic Capacity
(in3)
Open Set VersionEngine SpecificationsRating
Prime (PRP)or Standby
(LTP)
kWe kVA
BCC 925P-60 PRP 925 1156 KTA 38 G4 12 Vee 2300 ISO-206.25/6.25
Fuel Cons100% Load(US gal/hr)
64.7 HCI 634 J
12 13
149 × 58 × 73 17850
BCC 1600P-60 PRP 1600 2000 QSK 60 G5 16 Vee 36736.25/7.48 106.2 PI 734 E 237 × 100 × 128 31340 ‡
BCC 1760S-60 LTP 1760 2200 QSK 60 G5 16 Vee 36736.25/7.48 116.8 PI 734 E 237 × 100 × 128 31340 ‡
BCC 1850P-60 PRP 1850 2313 QSK 60 G7 16 Vee 36736.25/7.48 124.4 PI 734 F 237 × 92 × 114 31340 ‡
BCC 2000S-60 LTP 2000 2500 QSK 60 G7 16 Vee 6.25/7.48 3673 137.4 PI 734 F 237 × 92 × 114 31340 ‡
BCC 550P-60 PRP 550 688 VTA 28 G5 12 Vee 1710 ISO-205.5/6.0 41 HCI 534 E 150 × 63 × 85 12835 190
BCC 600S-60 LTP 600 750 VTA 28 G5 12 Vee 1710 ISO-205.5/6.0 46 HCI 534 E 150 × 63 × 85 12835 190
BCC 725P-60 PRP 725 906 QSK 23 G3 6 in line 1413 ISO-206.69/6.69 50 HCI 634 G 166 × 71 × 88 13660 190
BCC 800S-60 LTP 800 1000 QSK 23 G3 6 in line 1413 ISO-206.69/6.69 56 HCI 634 G 166 × 71 × 88 13660 190
BCC 550P-60 PRP 550 688 VTA 28 G5 12 Vee 1710 ISO-205.5/6.0 41 HCI 534 E 150 × 63 × 85 12835 190
BCC 600S-60 LTP 600 750 VTA 28 G5 12 Vee 1710 ISO-205.5/6.0 46 HCI 534 E 150 × 63 × 85 12835 190
BCC 725P-60 PRP 725 906 QSK 23 G3 6 in line 1413 ISO-206.69/6.69 50 HCI 634 G 166 × 71 × 88 13660 190
BCC 800S-60 LTP 800 1000 QSK 23 G3 6 in line 1413 ISO-206.69/6.69 56 HCI 634 G 166 × 71 × 88 13660 190
53
BCC 1000S-60 LTP 1000 1250 KTA 38 G4 12 Vee 2300 ISO-206.25/6.25 71.6 HCI 634 J 149 × 58 × 73 17850 53
BCC 1100P-60 PRP 1100 1375 KTA 50 G3 16 Vee 3067 ISO-40 HC6.25/6.25 76.9 PI 734 A 205 × 71 × 93 22490 53
BCC 1275S-60 LTP 1275 1594 KTA 50 G3 16 Vee 3067 ISO-40 HC6.25/6.25 87.2 PI 734 A 205 × 71 × 93 22490 53
BCC 1280P-60 PRP 1280 1600 KTA 50 G9 16 Vee 3067 ISO-40 HC6.25/6.25 87.2 PI 734 C 222 × 81 × 93 24275 53
BCC 1500S-60 LTP 1500 1875 KTA 50 G9 16 Vee 3067 ISO-40 HC6.25/6.25 103.6 PI 734 C 222 × 81 × 93 24275 53
152 × 63 × 85 9570
152 × 63 × 85 9570
166 × 71 × 88 13660
166 × 71 × 88 13660
152 × 63 × 85 9570
152 × 63 × 85 9570
166 × 71 × 88 13660
166 × 71 × 88 13660
172 × 70 × 93 15616
172 × 70 × 93 15616
234 × 80 × 116 22380
234 × 80 × 116 22380
245 × 100 × 130 33070
245 × 100 × 130 33070
-
-
‡
‡
190
190
190
190
190
190
190
190
53
53
53
53
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
‡
‡
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. Specifications and design subject to change without notice.
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. Specifications and design subject to change without notice.
EPA 2008 NON CERTIFIED
EPA 2008 NON CERTIFIED
EPA 2008 CERTIFIED
AlternatorModel
Bore/Stroke
(in)
* Optional‡ For details on acoustic packages please contact Broadcrown Sales Department
* Optional‡ For details on acoustic packages please contact Broadcrown Sales Department
AlternatorModel
EnclosureType
Fuel Tank*Capacity(US gal)
-
-
-
-
power generation
220/127V220/127V
480/277V480/277V
600kW~
2000kWCummins
Range: 3 Phase 60Hz
ContainerVersion
Genset Model EngineModel
CylinderArrangement
Dimensions(L × W × H)
(in)
Weight(Wet)
(lb)
Fuel Tank*Capacity(US gal)
EnclosureType
Open Set VersionEngine Specifications
Fuel Cons100% Load(US gal/hr)
EPA 2008 CERTIFIEDRating
600kW~
2000kWCummins
Range: 3 Phase 60Hz
BCC 550P-60 T2 QSK 19 G3 6 in line 40.9
BCC 600S-60 T2 QSK 19 G3 6 in line 45.4
BCC 725P-60 T2 QSK 23 G7 6 in line 50
BCC 800S-60 T2 QSK 23 G7 6 in line 56
BCC 550P-60 T2 QSK 19 G3 6 in line 40.9
BCC 600S-60 T2 QSK 19 G3 6 in line 45.4
BCC 725P-60 T2 QSK 23 G7 6 in line 50
BCC 800S-60 T2 QSK 23 G7 6 in line 56
BCC 910P-60 T2 QST 30 G5 12 Vee 63.4
BCC 1000S-60 T2 QST 30 G5 12 Vee 70.5
BCC 1365P-60 T2 QSK 50 G4 16 Vee 96.7
BCC 1500S-60 T2 QSK 50 G4 16 Vee 109.6
BCC 1825P-60 T2 QSK 60 G12 16 Vee 129
BCC 2000S-60 T2
Prime (PRP)or Standby
(LTP)
PRP
LTP
PRP
LTP
PRP
LTP
PRP
LTP
PRP
LTP
PRP
LTP
PRP
LTP
kWe
550
600
725
800
550
600
725
800
910
1000
1365
1500
1825
2000
kVA
688
750
906
1000
688
750
906
1000
1138
1250
1706
1875
2281
2500 QSK 60 G12 16 Vee
Bore/Stroke
(in)
6.26/6.26
6.26/6.26
6.69/6.69
6.69/6.69
6.25/6.25
6.25/6.25
6.69/6.69
6.69/6.69
5.51/6.5
5.51/6.5
6.25/6.25
6.25/6.25
6.25/7.48
6.25/7.48
CubicCapacity
(in3)
1159
1159
1413
1413
1159
1159
1413
1413
1860
1860
3070
3070
3673
3673 142
HCI 534 E
HCI 534 E
HCI 634 G
HCI 634 G
HCI 534 E
HCI 534 E
HCI 634 G
HCI 634 G
HCI 634 J
HCI 634 J
PI 734 C
PI 734 C
PI 734 F
PI 734 F
ContainerVersion
Genset Model EngineModel
CylinderArrangement
Dimensions(L × W × H)
(in)
Weight(Wet) (lb)
Cubic Capacity
(in3)
Open Set VersionEngine SpecificationsRating
Prime (PRP)or Standby
(LTP)
kWe kVA
BCC 925P-60 PRP 925 1156 KTA 38 G4 12 Vee 2300 ISO-206.25/6.25
Fuel Cons100% Load(US gal/hr)
64.7 HCI 634 J
12 13
149 × 58 × 73 17850
BCC 1600P-60 PRP 1600 2000 QSK 60 G5 16 Vee 36736.25/7.48 106.2 PI 734 E 237 × 100 × 128 31340 ‡
BCC 1760S-60 LTP 1760 2200 QSK 60 G5 16 Vee 36736.25/7.48 116.8 PI 734 E 237 × 100 × 128 31340 ‡
BCC 1850P-60 PRP 1850 2313 QSK 60 G7 16 Vee 36736.25/7.48 124.4 PI 734 F 237 × 92 × 114 31340 ‡
BCC 2000S-60 LTP 2000 2500 QSK 60 G7 16 Vee 6.25/7.48 3673 137.4 PI 734 F 237 × 92 × 114 31340 ‡
BCC 550P-60 PRP 550 688 VTA 28 G5 12 Vee 1710 ISO-205.5/6.0 41 HCI 534 E 150 × 63 × 85 12835 190
BCC 600S-60 LTP 600 750 VTA 28 G5 12 Vee 1710 ISO-205.5/6.0 46 HCI 534 E 150 × 63 × 85 12835 190
BCC 725P-60 PRP 725 906 QSK 23 G3 6 in line 1413 ISO-206.69/6.69 50 HCI 634 G 166 × 71 × 88 13660 190
BCC 800S-60 LTP 800 1000 QSK 23 G3 6 in line 1413 ISO-206.69/6.69 56 HCI 634 G 166 × 71 × 88 13660 190
BCC 550P-60 PRP 550 688 VTA 28 G5 12 Vee 1710 ISO-205.5/6.0 41 HCI 534 E 150 × 63 × 85 12835 190
BCC 600S-60 LTP 600 750 VTA 28 G5 12 Vee 1710 ISO-205.5/6.0 46 HCI 534 E 150 × 63 × 85 12835 190
BCC 725P-60 PRP 725 906 QSK 23 G3 6 in line 1413 ISO-206.69/6.69 50 HCI 634 G 166 × 71 × 88 13660 190
BCC 800S-60 LTP 800 1000 QSK 23 G3 6 in line 1413 ISO-206.69/6.69 56 HCI 634 G 166 × 71 × 88 13660 190
53
BCC 1000S-60 LTP 1000 1250 KTA 38 G4 12 Vee 2300 ISO-206.25/6.25 71.6 HCI 634 J 149 × 58 × 73 17850 53
BCC 1100P-60 PRP 1100 1375 KTA 50 G3 16 Vee 3067 ISO-40 HC6.25/6.25 76.9 PI 734 A 205 × 71 × 93 22490 53
BCC 1275S-60 LTP 1275 1594 KTA 50 G3 16 Vee 3067 ISO-40 HC6.25/6.25 87.2 PI 734 A 205 × 71 × 93 22490 53
BCC 1280P-60 PRP 1280 1600 KTA 50 G9 16 Vee 3067 ISO-40 HC6.25/6.25 87.2 PI 734 C 222 × 81 × 93 24275 53
BCC 1500S-60 LTP 1500 1875 KTA 50 G9 16 Vee 3067 ISO-40 HC6.25/6.25 103.6 PI 734 C 222 × 81 × 93 24275 53
152 × 63 × 85 9570
152 × 63 × 85 9570
166 × 71 × 88 13660
166 × 71 × 88 13660
152 × 63 × 85 9570
152 × 63 × 85 9570
166 × 71 × 88 13660
166 × 71 × 88 13660
172 × 70 × 93 15616
172 × 70 × 93 15616
234 × 80 × 116 22380
234 × 80 × 116 22380
245 × 100 × 130 33070
245 × 100 × 130 33070
-
-
‡
‡
190
190
190
190
190
190
190
190
53
53
53
53
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
ISO-20
‡
‡
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. Specifications and design subject to change without notice.
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. Specifications and design subject to change without notice.
EPA 2008 NON CERTIFIED
EPA 2008 NON CERTIFIED
EPA 2008 CERTIFIED
AlternatorModel
Bore/Stroke
(in)
* Optional‡ For details on acoustic packages please contact Broadcrown Sales Department
* Optional‡ For details on acoustic packages please contact Broadcrown Sales Department
AlternatorModel
EnclosureType
Fuel Tank*Capacity(US gal)
-
-
-
-
power generation
220/127V220/127V
480/277V480/277V
1200kW~
1800kWMitsubishi
Range: 3 Phase 60Hz
Genset Model EngineModel
CylinderArrangement
Fuel Tank*Capacity(US gal)
Open Set VersionEngine Specifications
Fuel Cons100% Load(US gal/hr)
EPA 2008 NON CERTIFIEDRating
Prime (PRP)or Standby
(LTP)
kWe kVA
BCM 1080P-60 PRP 1080 1350 S12R-PTA 12 Vee 6.69/7.09 75 PI 734 A ISO-40 HC
BCM 1200S-60 LTP 1200 1500 S12R-PTA 12 Vee 6.69/7.09 83.7 PI 734 A ISO-40 HC
BCM 1200P-60 PRP 1200 1500 S12R-PTA2 12 Vee 6.69/7.09 86.9 PI 734 A ISO-40 HC
BCM 1350S-60 LTP 1350 1688 S12R-PTA2 12 Vee 6.69/7.09 95.9 PI 734 B ISO-40 HC
BCM 1480P-60 PRP 1480 1850 S16R-PTA 16 Vee 6.69/7.09 98.3 PI 734 D
BCM 1600S-60 LTP 1600 2000 S16R-PTA 16 Vee 6.69/7.09 109.1 PI 734 E
BCM 1650P-60 PRP 1650 2063 S16R-PTA2 16 Vee 6.69/7.09 118.1 PI 734 E
BCM 1800S-60 LTP 1800 2250 S16R-PTA2 16 Vee 6.69/7.09
CubicCapacity
(in3)
2992
2992
2992
2992
3989
3989
3989
3989 130.2 PI 734 E
14 15
Dimensions(L × W × H)
(in)
178 × 83 × 98
178 × 83 × 98
178 × 83 × 98
178 × 83 × 98
209 × 92 × 102
209 × 92 × 102
209 × 92 × 102
209 × 92 × 102
Weight(Wet)
(lb)
22285
22285
23035
23035
28875
28875
29700
29700
52
52
52
52
BCM 1150P-60 T2 PRP 1150 1430 S12R-Y2PTAW1 12 Vee 6.69/7.09 86.9 PI 734 A/B ISO-40 HC
BCM 1300S-60 T2 LTP 1200 1625 S12R-Y2PTAW1 12 Vee 6.69/7.09 95.9 PI 734 A/B ISO-40 HC
BCM 1480P-60 T2 PRP 1480 1850 S12R-Y2PTAW1 16 Vee 6.69/7.09 118.1 PI 734 D
BCM 1600S-60 T2 LTP 1600 2000 S12R-Y2PTAW1 16 Vee 6.69/7.09 130.2 PI 734 D/E
2992
2992
3989
3989
179 × 83 × 98
179 × 83 × 98
209 × 92 × 102
209 × 92 × 102
22285
22285
29700
29700
-
-
-
-
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
ContainerVersion
EnclosureType
AlternatorModel
Bore/Stroke
(in)
‡
‡
‡
‡
power generationMITSUBISHIE N G I N E S
* Optional‡ For details on acoustic packages please contact Broadcrown Sales Department
700kW~
3200kWMTU Range: 3 Phase 60Hz
ContainerVersion
Genset Model EngineModel
CylinderArrangement
Dimensions(L × W × H)
(in)
Weight(Wet) (lb)
Cubic Capacity
(in3)
Open Set VersionEngine SpecificationsRating
Prime (PRP)or Standby
(LTP)
kWe kVA Fuel Cons100% Load(US gal/hr)
RATING DEFINITIONS:Prime Power (PRP)These ratings are applicable for suppling electric power for an unlimited number of hours per year in a variable load application. The average load factor should not exceed 75% average of the Prime Power rating. An overload capacity of up to 10% is available for a period of up to 1 hour within a 12 hour period of operation (please see the relevant Data Sheet for details).Standby Power (LTP)These ratings are applicable for suppling emergency power for the duration of the utility power outage up to a maximum of 500 hours per year of which 300 hours may run continuously. The average load factor should not exceed 85% average of the standby power rating. Under no condition is the genset allowed to operate in parallel with the public utility at the standby rating. No overload is available. For base load (Continuous Power) applications consult Broadcrown Sales Department.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [100m (328ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. Specifications and design subject to change without notice.
EPA 2008 CERTIFIED
Bore/Stroke
(in)
AlternatorModel
ModelFuel TankCapacity(US gal)
220/127V
EPA 2008 NON CERTIFIEDEPA 2008 CERTIFIED
480/277V
power generation
BCMU 650P-60 T2 HCI 634 G12V 2000 G45 TD 13060650 12 Vee 5·12/5·9 46·423·88BCMU 700S-60 T2 HCI 634 G12V 2000 G45 TD 13060700 12 Vee 5·12/5·9 50·723·88
BCMU 800S-60 T2 HCI 634 G12V 2000 G85 TD 13060900 12 Vee 5·12/5·9 57·623·88BCMU 840P-60 T2 HCI 634 H16V 2000 G45 TD840 16 Vee 5·12/5·9 58·431·84
BCMU 925P-60 T2 HCI 634 J16V 2000 G85 TD 1591315913
925 16 Vee 5·12/5·9 64·131·84BCMU 1000S-60 T2 HCI 634 J16V 2000 G85 TD1000 16 Vee 5·12/5·9 70·831·84
PI 734 A18V 2000 G85 TD 187011200 18 Vee 5·12/5·9 82·835·82
BCMU 1100P-60 T2
-
-
-
-
-
-
-
ISO-20 HC
ISO-20 HC
ISO-20 HC
ISO-20 HC
ISO-20 HC
ISO-20 HC
‡
PRP
LTP
LTPPRP
PRPLTPPRP
164 × 63 × 84
BCMU 740P-60 T2 HCI 634 G12V 2000 G85 TD 13060740 12 Vee 5·12/5·9 52·423·88 - ISO-20 HCPRP 164 × 63 × 84164 × 63 × 84
164 × 63 × 84
BCMU 910S-60 T2 HCI 634 H16V 2000 G45 TD 15913
15913
910 16 Vee 5·12/5·9 64·131·84 - ISO-20 HCLTP 178 × 67 × 89178 × 67 × 89
178 × 67 × 89
PI 734 A18V 2000 G85 TD 187011100 18 Vee 5·12/5·9 74·935·82 - ‡188 × 84 × 99178 × 67 × 89
188 × 84 × 99BCMU 1200S-60 T2 LTP
BCMU 1400P-60 PI 734 C12V 4000 G43 315261400 12 Vee 6·69/8·27 92·757·2
BCMU 1600S-60 PI 734 D12V 4000 G43 315261600 12 Vee 6·69/8·27 108·157·2
BCMU 1760S-60 PI 734 E12V 4000 G83 315261760 12 Vee 6·69/8·27 123·057·2
BCMU 1875P-60 PI 734 F16V 4000 G43 383181875 16 Vee 6·69/8·27 125·176·3
BCMU 2100S-60 PI 734 F16V 4000 G43 383182100 16 Vee 6·69/8·27 141·976·3BCMU 2050P-60 PI 734 G16V 4000 G83 383182050 16 Vee 6·69/8·27 142·676·3
LVSI 804 S220V 4000 G43 451382275 20 Vee 6·69/8·27 156·595·4
BCMU 2250S-60
--
--
--
-
‡‡
‡‡
‡‡
‡
PRP
LTP
LTP
PRP
LTP
PRPLTP
208 × 91 × 127
BCMU 1600P-60 PI 734 E12V 4000 G83 315261600 12 Vee 6·69/8·27 108·157·2 - ‡PRP 208 × 91 × 127
208 × 91 × 127
208 × 91 × 127
BCMU 1900S-60 PI 734 E16V 4000 G43 383181900 16 Vee 6·69/8·27 126·576·3 - ‡LTP 240 × 91 × 127
240 × 91 × 127
240 × 91 × 127
PI 734 G16V 4000 G83 383182250 16 Vee 6·69/8·27 161·876·3 - ‡240 × 91 × 127240 × 91 × 127
273 × 93 × 126BCMU 2275P-60 PRP
BCMU 2500P-60 LVSI 804 T220V 4000 G83 451382500 20 Vee 6·69/8·27 171·495·4
BCMU 2800S-60 LVSI 804 T220V 4000 G83 451382800 20 Vee 6·69/8·27 188·395·4
LVSI 804 W220V 4000 G83L 482683200 20 Vee 6·69/8·27 231·395·4
BCMU 2800P-60
--
-
‡‡
‡
PRP
LTP
PRP
BCMU 2500S-60 LVSI 804 S220V 4000 G43 451382500 20 Vee 6·69/8·27 171·495·4 - ‡LTP 273 × 93 × 126
273 × 93 × 126
LVSI 804 W2
813
875
10001050
11561250
1500
925
1138
1375
1750
2000
2200
2344
2625
2562
2844
2000
2375
2813
3125
3500
4000
3125
3500 20V 4000 G83L 482682800 20 Vee 6·69/8·27 188·395·4 - ‡262 × 103 × 130
273 × 93 × 126
262 × 103 × 130BCMU 3200S-60 LTP
480/277V
220/127VThese units are
not available with a baseframe fuel tank, however,
freestanding tanks are
available on request.
For details on acoustic packages
please contact Broadcrown Sales
Department.
‡ For details on acoustic packages please contact Broadcrown Sales Department
1200kW~
1800kWMitsubishi
Range: 3 Phase 60Hz
Genset Model EngineModel
CylinderArrangement
Fuel Tank*Capacity(US gal)
Open Set VersionEngine Specifications
Fuel Cons100% Load(US gal/hr)
EPA 2008 NON CERTIFIEDRating
Prime (PRP)or Standby
(LTP)
kWe kVA
BCM 1080P-60 PRP 1080 1350 S12R-PTA 12 Vee 6.69/7.09 75 PI 734 A ISO-40 HC
BCM 1200S-60 LTP 1200 1500 S12R-PTA 12 Vee 6.69/7.09 83.7 PI 734 A ISO-40 HC
BCM 1200P-60 PRP 1200 1500 S12R-PTA2 12 Vee 6.69/7.09 86.9 PI 734 A ISO-40 HC
BCM 1350S-60 LTP 1350 1688 S12R-PTA2 12 Vee 6.69/7.09 95.9 PI 734 B ISO-40 HC
BCM 1480P-60 PRP 1480 1850 S16R-PTA 16 Vee 6.69/7.09 98.3 PI 734 D
BCM 1600S-60 LTP 1600 2000 S16R-PTA 16 Vee 6.69/7.09 109.1 PI 734 E
BCM 1650P-60 PRP 1650 2063 S16R-PTA2 16 Vee 6.69/7.09 118.1 PI 734 E
BCM 1800S-60 LTP 1800 2250 S16R-PTA2 16 Vee 6.69/7.09
CubicCapacity
(in3)
2992
2992
2992
2992
3989
3989
3989
3989 130.2 PI 734 E
14 15
Dimensions(L × W × H)
(in)
178 × 83 × 98
178 × 83 × 98
178 × 83 × 98
178 × 83 × 98
209 × 92 × 102
209 × 92 × 102
209 × 92 × 102
209 × 92 × 102
Weight(Wet)
(lb)
22285
22285
23035
23035
28875
28875
29700
29700
52
52
52
52
BCM 1150P-60 T2 PRP 1150 1430 S12R-Y2PTAW1 12 Vee 6.69/7.09 86.9 PI 734 A/B ISO-40 HC
BCM 1300S-60 T2 LTP 1200 1625 S12R-Y2PTAW1 12 Vee 6.69/7.09 95.9 PI 734 A/B ISO-40 HC
BCM 1480P-60 T2 PRP 1480 1850 S12R-Y2PTAW1 16 Vee 6.69/7.09 118.1 PI 734 D
BCM 1600S-60 T2 LTP 1600 2000 S12R-Y2PTAW1 16 Vee 6.69/7.09 130.2 PI 734 D/E
2992
2992
3989
3989
179 × 83 × 98
179 × 83 × 98
209 × 92 × 102
209 × 92 × 102
22285
22285
29700
29700
-
-
-
-
RATING DEFINITIONS:Prime Power (PRP)These ratings are suitable for continuous operation in a variable load application in lieu of the main power network. There is no limitation to the annual hours of operation. A 10% overload is available for 1 hour in every 12 hours of operation.Standby Power (LTP)These ratings are suitable for the supply of emergency power in a variable load application in the event of a main power network failure for a limited number of hours per year. No overload is available.All ratings at 0·8 Power Factor.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [110m (361ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: All data in accordance with ISO3046, DIN6271, ISO8528 standards. Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. All specifications and design are subject to change without notice.
ContainerVersion
EnclosureType
AlternatorModel
Bore/Stroke
(in)
‡
‡
‡
‡
power generationMITSUBISHIE N G I N E S
* Optional‡ For details on acoustic packages please contact Broadcrown Sales Department
700kW~
3200kWMTU Range: 3 Phase 60Hz
ContainerVersion
Genset Model EngineModel
CylinderArrangement
Dimensions(L × W × H)
(in)
Weight(Wet) (lb)
Cubic Capacity
(in3)
Open Set VersionEngine SpecificationsRating
Prime (PRP)or Standby
(LTP)
kWe kVA Fuel Cons100% Load(US gal/hr)
RATING DEFINITIONS:Prime Power (PRP)These ratings are applicable for suppling electric power for an unlimited number of hours per year in a variable load application. The average load factor should not exceed 75% average of the Prime Power rating. An overload capacity of up to 10% is available for a period of up to 1 hour within a 12 hour period of operation (please see the relevant Data Sheet for details).Standby Power (LTP)These ratings are applicable for suppling emergency power for the duration of the utility power outage up to a maximum of 500 hours per year of which 300 hours may run continuously. The average load factor should not exceed 85% average of the standby power rating. Under no condition is the genset allowed to operate in parallel with the public utility at the standby rating. No overload is available. For base load (Continuous Power) applications consult Broadcrown Sales Department.
STANDARD REFERENCE CONDITIONS: Output ratings are based on gensets operating at: 25°C (77°F) air inlet temperature, 100 kPa barometric pressure [100m (328ft) altitude] and 30% relative humidity. For de-rating, please consult Broadcrown Sales Department. NOTES: Other voltages available, please refer to Data Sheet or consult Broadcrown Sales Department. Specifications and design subject to change without notice.
EPA 2008 CERTIFIED
Bore/Stroke
(in)
AlternatorModel
ModelFuel TankCapacity(US gal)
220/127V
EPA 2008 NON CERTIFIEDEPA 2008 CERTIFIED
480/277V
power generation
BCMU 650P-60 T2 HCI 634 G12V 2000 G45 TD 13060650 12 Vee 5·12/5·9 46·423·88BCMU 700S-60 T2 HCI 634 G12V 2000 G45 TD 13060700 12 Vee 5·12/5·9 50·723·88
BCMU 800S-60 T2 HCI 634 G12V 2000 G85 TD 13060900 12 Vee 5·12/5·9 57·623·88BCMU 840P-60 T2 HCI 634 H16V 2000 G45 TD840 16 Vee 5·12/5·9 58·431·84
BCMU 925P-60 T2 HCI 634 J16V 2000 G85 TD 1591315913
925 16 Vee 5·12/5·9 64·131·84BCMU 1000S-60 T2 HCI 634 J16V 2000 G85 TD1000 16 Vee 5·12/5·9 70·831·84
PI 734 A18V 2000 G85 TD 187011200 18 Vee 5·12/5·9 82·835·82
BCMU 1100P-60 T2
-
-
-
-
-
-
-
ISO-20 HC
ISO-20 HC
ISO-20 HC
ISO-20 HC
ISO-20 HC
ISO-20 HC
‡
PRP
LTP
LTPPRP
PRPLTPPRP
164 × 63 × 84
BCMU 740P-60 T2 HCI 634 G12V 2000 G85 TD 13060740 12 Vee 5·12/5·9 52·423·88 - ISO-20 HCPRP 164 × 63 × 84164 × 63 × 84
164 × 63 × 84
BCMU 910S-60 T2 HCI 634 H16V 2000 G45 TD 15913
15913
910 16 Vee 5·12/5·9 64·131·84 - ISO-20 HCLTP 178 × 67 × 89178 × 67 × 89
178 × 67 × 89
PI 734 A18V 2000 G85 TD 187011100 18 Vee 5·12/5·9 74·935·82 - ‡188 × 84 × 99178 × 67 × 89
188 × 84 × 99BCMU 1200S-60 T2 LTP
BCMU 1400P-60 PI 734 C12V 4000 G43 315261400 12 Vee 6·69/8·27 92·757·2
BCMU 1600S-60 PI 734 D12V 4000 G43 315261600 12 Vee 6·69/8·27 108·157·2
BCMU 1760S-60 PI 734 E12V 4000 G83 315261760 12 Vee 6·69/8·27 123·057·2
BCMU 1875P-60 PI 734 F16V 4000 G43 383181875 16 Vee 6·69/8·27 125·176·3
BCMU 2100S-60 PI 734 F16V 4000 G43 383182100 16 Vee 6·69/8·27 141·976·3BCMU 2050P-60 PI 734 G16V 4000 G83 383182050 16 Vee 6·69/8·27 142·676·3
LVSI 804 S220V 4000 G43 451382275 20 Vee 6·69/8·27 156·595·4
BCMU 2250S-60
--
--
--
-
‡‡
‡‡
‡‡
‡
PRP
LTP
LTP
PRP
LTP
PRPLTP
208 × 91 × 127
BCMU 1600P-60 PI 734 E12V 4000 G83 315261600 12 Vee 6·69/8·27 108·157·2 - ‡PRP 208 × 91 × 127
208 × 91 × 127
208 × 91 × 127
BCMU 1900S-60 PI 734 E16V 4000 G43 383181900 16 Vee 6·69/8·27 126·576·3 - ‡LTP 240 × 91 × 127
240 × 91 × 127
240 × 91 × 127
PI 734 G16V 4000 G83 383182250 16 Vee 6·69/8·27 161·876·3 - ‡240 × 91 × 127240 × 91 × 127
273 × 93 × 126BCMU 2275P-60 PRP
BCMU 2500P-60 LVSI 804 T220V 4000 G83 451382500 20 Vee 6·69/8·27 171·495·4
BCMU 2800S-60 LVSI 804 T220V 4000 G83 451382800 20 Vee 6·69/8·27 188·395·4
LVSI 804 W220V 4000 G83L 482683200 20 Vee 6·69/8·27 231·395·4
BCMU 2800P-60
--
-
‡‡
‡
PRP
LTP
PRP
BCMU 2500S-60 LVSI 804 S220V 4000 G43 451382500 20 Vee 6·69/8·27 171·495·4 - ‡LTP 273 × 93 × 126
273 × 93 × 126
LVSI 804 W2
813
875
10001050
11561250
1500
925
1138
1375
1750
2000
2200
2344
2625
2562
2844
2000
2375
2813
3125
3500
4000
3125
3500 20V 4000 G83L 482682800 20 Vee 6·69/8·27 188·395·4 - ‡262 × 103 × 130
273 × 93 × 126
262 × 103 × 130BCMU 3200S-60 LTP
480/277V
220/127VThese units are
not available with a baseframe fuel tank, however,
freestanding tanks are
available on request.
For details on acoustic packages
please contact Broadcrown Sales
Department.
‡ For details on acoustic packages please contact Broadcrown Sales Department
Specification & Options
This document details the main specification and options available for a standard generator.
A range of automatic Load Transfer Panels is also available containing either 3 pole or 4 pole
electrically and mechanically interlocked contactors or circuit breakers (from 45 amps to 3200 amps)
and which are CE Compliant.
For specialised requirements such as generating sets in excess of 3.2MW Prime Power, multi-set
installations, HV generation, stringent noise levels, remote cooling, bespoke control panels using
alternative Generator Controllers or with PLC control (including dual redundant systems), special
acoustic enclosure design, or the provision of alternative* engine and alternator combinations then
please refer to Broadcrown Sales Department.
* Alternative engine and alternator manufacturers include MAN, B&W and Leroy Somer.
Works testing of a multi-set MTU powered HV generation project
MTU powered 1600kW 11kV generating set
Bespoke freestanding control panel
Special acoustic enclosure design (66dB(A) at 3ft)
16 17
4-stroke Water Cooled Diesel EngineMechanical GovernorElectronic GovernorAir Intake Heater Or Glow Plug
Lub Oil Drain ValveSump First Fill Of Lub Oil
Lub Oil Drain Extended To Edge Of BaseframeManual Lub Oil Drain Pump
Coolant Drain Extended To Edge Of BaseframeFirst Fill Of Coolant / Antifreeze
Standard Air FilterFuel Filter And Water SeparatorExhaust Manifold GuardCoolant HeaterAutomatic Lub Oil Re�ll System
Engine Driven RadiatorFan GuardsCoolant Drain Valve
Low Level Vent & Fill PipeworkLow Level Manual Fill Pump
Single Bearing AlternatorClass H Insulation System & Class H Temperature RiseIP23 ProtectionAutomatic Voltage Regulator With 1% Voltage RegulationAutomatic Voltage Regulator With 0.5% Voltage RegulationPMG ExcitationAnti-condensation HeaterQuadrature Droop KitAir Inlet FilterThermistor Probes & Control Box
Powder Coated Fabricated Steel BaseframeBuilt In Anti-vibration MountingsCrane & Fork Lifting Points Depending On ModelOperation & Maintenance ManualOperation & Maintenance Manual (Additional Copies)Standard Colour (Black/ Yellow)Output 3 Pole Circuit BreakerWorks TestGenset Packed Under Heavy Duty Shrink Wrap Plastic
Industrial 15dBA Reduction Silencer Supplied LooseNon-Supply Of Industrial Type Silencer — Price ReductionResidential 24dBA Reduction Silencer Supplied LooseCritical 35dBA Reduction Silencer Supplied LooseFlexible Bellows Supplied LooseSet Of Connection Flanges For Silencer/ Bellows
12VDC Electric Starter Motor24VDC Electric Starter MotorBattery Charging AlternatorEngine Starting Battery With Cables & Battery TrayWet Type Batteries Instead Of Dry (Not Available With Sea Freight) Non-supply Of Batteries — Price Reduction
Integral Single Skin Fuel Tank Within BaseframeFlexible Fuel Feed & Return LinesBaseframe With Integral Bund (Without Fuel Tank)Baseframe With Integral Bund & Drop In Fuel TankLow Fuel Level Switch — Single Point
MidiRange
●
▼
▼
●
●
❍
●
❍
●
●
❍
❍
❍
●
●
●
●
●
●
●
●●
●
●
❍
●
●
●
●
●
●
●
●
●
❍
❍
●
●
❍
Fuel Level Switch — 4 PointManual Fuel Transfer PumpFuel Transfer System — Option 1 Gravity SystemFuel Transfer System — Option 2 Electric Pump SystemFuel Transfer System — Option 3 Gravity & Pump System
John DeereRange
●
▼
▼▼
❍
●
●
❍
❍
●
❍
●
❍
❍
❍
❍
❍
❍
❍
❍
❍
●●
●
●
●
●
●
●
●
●
●
❍
●
●
●
●
●
❍
❍
❍
●
❍
●
●
●
❍
❍
●
●
❍
❍
❍
❍
❍
❍
❍
Deutz Range
●
●
❍
●
●
❍
❍
●
❍
❍
❍
❍
●●
●
❍
❍
❍
❍
❍
❍
●
●
●
●
●
●
●
●
❍
●
●
●
●
●
❍
❍
❍
●
❍
●
●
●
❍
❍
●
●
❍
❍
❍
❍
❍
❍
❍
VolvoRange
●
●
❍
●
●
❍
❍
●
❍
●
●
❍
❍
●●
●
❍
❍
❍
❍
❍
❍
●
●
●
●
●
●
●
●
❍
●
●
●
●
●
❍
❍
❍
●
❍
●
●
●
❍
❍
●
●
❍
❍
❍
❍
❍
❍
❍
CumminsRange
●
●
●
●
❍
●
●
❍
▼
❍
❍
❍
❍
▼
▼
●
●●
●
❍
❍
❍
❍
●
●
●
●
▼
●
●
❍
●
❍
●
●
❍
❍
❍
❍
❍
●
●
●
❍
❍
●
❍
❍ ▼
❍ ▼
❍
❍
❍
❍
❍
❍
Mitsubishi Range
●
●
●
●
❍
●
●
❍
❍
❍
❍
❍
●
●
●●
●
❍
❍
❍
❍
●
●
●
●
●
●
●
❍
●
❍
●
●
❍
❍
❍
❍
❍
●
●
●
❍
❍
●
❍
❍
❍
❍
❍
❍
❍
PerkinsRange
●
●
●
●
❍
●
●
❍
❍
❍
❍
❍
❍
▼
▼
●
●●
●
❍
❍
❍
❍
●
●
●
●
▼
●
●
❍
●
❍
●
●
❍
❍
❍
❍
❍
●
●
●
❍
❍
●
❍ ▼
❍
❍ ▼ ❍ ▼
❍
❍
❍
❍
❍
❍
MTURange
●
●
●
●
❍
●
●
❍
❍
❍
❍
❍
❍
▼
▼
●
▼●
●
❍
❍
❍
❍
●
●
●
●
●
●
●
❍
●
❍
●
●
❍
❍
❍
❍
❍
●
●
●
❍
❍
●
❍
❍
❍
❍
❍
❍
❍
Engi
neRa
diat
orAl
tern
ator
Gene
ral
Exha
ust
Star
ting
Fuel
● Standard equipment ❍ Available as an option ▼ Model dependent
SPECIFICATIONS & OPTIONS MODEL DESIGNATION
Specification & Options
This document details the main specification and options available for a standard generator.
A range of automatic Load Transfer Panels is also available containing either 3 pole or 4 pole
electrically and mechanically interlocked contactors or circuit breakers (from 45 amps to 3200 amps)
and which are CE Compliant.
For specialised requirements such as generating sets in excess of 3.2MW Prime Power, multi-set
installations, HV generation, stringent noise levels, remote cooling, bespoke control panels using
alternative Generator Controllers or with PLC control (including dual redundant systems), special
acoustic enclosure design, or the provision of alternative* engine and alternator combinations then
please refer to Broadcrown Sales Department.
* Alternative engine and alternator manufacturers include MAN, B&W and Leroy Somer.
Works testing of a multi-set MTU powered HV generation project
MTU powered 1600kW 11kV generating set
Bespoke freestanding control panel
Special acoustic enclosure design (66dB(A) at 3ft)
16 17
4-stroke Water Cooled Diesel EngineMechanical GovernorElectronic GovernorAir Intake Heater Or Glow Plug
Lub Oil Drain ValveSump First Fill Of Lub Oil
Lub Oil Drain Extended To Edge Of BaseframeManual Lub Oil Drain Pump
Coolant Drain Extended To Edge Of BaseframeFirst Fill Of Coolant / Antifreeze
Standard Air FilterFuel Filter And Water SeparatorExhaust Manifold GuardCoolant HeaterAutomatic Lub Oil Re�ll System
Engine Driven Radiator FanFan GuardsCoolant Drain Valve
Low Level Vent & Fill PipeworkLow Level Manual Fill Pump
Single Bearing AlternatorClass H Insulation System & Class H Temperature RiseIP23 ProtectionAutomatic Voltage Regulator With 1% Voltage RegulationAutomatic Voltage Regulator With 0.5% Voltage RegulationPMG ExcitationAnti-condensation HeaterQuadrature Droop KitAir Inlet FilterThermistor Probes & Control Box
Powder Coated Fabricated Steel BaseframeBuilt In Anti-vibration MountingsCrane & Fork Lifting Points Depending On ModelOperation & Maintenance ManualOperation & Maintenance Manual (Additional Copies)Standard Colour (Black/ Yellow)Output 3 Pole Circuit BreakerWorks TestGenset Packed Under Heavy Duty Shrink Wrap Plastic
Industrial 15dBA Reduction Silencer Supplied LooseNon-Supply Of Industrial Type Silencer — Price ReductionResidential 24dBA Reduction Silencer Supplied LooseCritical 35dBA Reduction Silencer Supplied LooseFlexible Bellows Supplied LooseSet Of Connection Flanges For Silencer/ Bellows
12VDC Electric Starter Motor24VDC Electric Starter MotorBattery Charging AlternatorEngine Starting Battery With Cables & Battery TrayWet Type Batteries Instead Of Dry (Not Available With Sea Freight) Non-supply Of Batteries — Price Reduction
Integral Single Skin Fuel Tank Within BaseframeFlexible Fuel Feed & Return LinesBaseframe With Integral Bund (Without Fuel Tank)Baseframe With Integral Bund & Drop In Fuel TankLow Fuel Level Switch — Single Point
MidiRange
●
▼
▼
●
●
❍
●
❍
●
●
❍
❍
❍
●
●
●
●
●
●
●
●●
●
●
❍
●
●
●
●
●
●
●
●
●
❍
❍
●
●
❍
Fuel Level Switch — 4 PointManual Fuel Transfer PumpFuel Transfer System — Option 1 Gravity SystemFuel Transfer System — Option 2 Electric Pump SystemFuel Transfer System — Option 3 Gravity & Pump System
John DeereRange
●
▼
▼▼
❍
●
●
❍
❍
●
❍
●
❍
❍
❍
❍
❍
❍
❍
❍
❍
●●
●
●
●
●
●
●
●
●
●
❍
●
●
●
●
●
❍
❍
❍
●
❍
●
●
●
❍
❍
●
●
❍
❍
❍
❍
❍
❍
❍
Deutz Range
●
●
❍
●
●
❍
❍
●
❍
❍
❍
❍
●●
●
❍
❍
❍
❍
❍
❍
●
●
●
●
●
●
●
●
❍
●
●
●
●
●
❍
❍
❍
●
❍
●
●
●
❍
❍
●
●
❍
❍
❍
❍
❍
❍
❍
VolvoRange
●
●
❍
●
●
❍
❍
●
❍
●
●
❍
❍
●●
●
❍
❍
❍
❍
❍
❍
●
●
●
●
●
●
●
●
❍
●
●
●
●
●
❍
❍
❍
●
❍
●
●
●
❍
❍
●
●
❍
❍
❍
❍
❍
❍
❍
CumminsRange
●
●
●
●
❍
●
●
❍
▼
❍
❍
❍
❍
▼
▼
●
●●
●
❍
❍
❍
❍
●
●
●
●
▼
●
●
❍
●
❍
●
●
❍
❍
❍
❍
❍
●
●
●
❍
❍
●
❍
❍ ▼
❍ ▼
❍
❍
❍
❍
❍
❍
Mitsubishi Range
●
●
●
●
❍
●
●
❍
❍
❍
❍
❍
●
●
●●
●
❍
❍
❍
❍
●
●
●
●
●
●
●
❍
●
❍
●
●
❍
❍
❍
❍
❍
●
●
●
❍
❍
●
❍
❍
❍
❍
❍
❍
❍
PerkinsRange
●
●
●
●
❍
●
●
❍
❍
❍
❍
❍
❍
▼
▼
●
●●
●
❍
❍
❍
❍
●
●
●
●
▼
●
●
❍
●
❍
●
●
❍
❍
❍
❍
❍
●
●
●
❍
❍
●
❍ ▼
❍
❍ ▼ ❍ ▼
❍
❍
❍
❍
❍
❍
MTURange
●
●
●
●
❍
●
●
❍
❍
❍
❍
❍
❍
▼
▼
●
▼●
●
❍
❍
❍
❍
●
●
●
●
●
●
●
❍
●
❍
●
●
❍
❍
❍
❍
❍
●
●
●
❍
❍
●
❍
❍
❍
❍
❍
❍
❍
Engi
neRa
diat
orAl
tern
ator
Gene
ral
Exha
ust
Star
ting
Fuel
● Standard equipment ❍ Available as an option ▼ Model dependent
SPECIFICATIONS & OPTIONS MODEL DESIGNATION
18 19
For the range of standard generating sets for the export market and small UK projects up to 200kW, Broadcrown have developed a standard range of acoustic canopies — designed to operate in harsh outdoor environmments whilst providing excellent security and acoustic performance.
All steel canopy components are pre-treated and polyester powder coated (to a typical thickness of 70-80μm) in RAL9001 white and all baseframes are finished in RAL9005 black. This, along with the use of zinc plated fasteners and neoprene seals, provides for a very durable yet attractive finish.
Acoustically, the canopies are designed to meet the requirements of EU Legislation 2000/14/EC. This level of performance is met by the extensive use of fire-retardant polyurethane foam together with efficient management of cooling air. Exhaust noise is minimised by internally mounted high performance exhaust silencers.
A steel fuel tank, complete with filler, gauge and accessory points, is integrated within the baseframe on all canopies except Midi. Alternatively, these can be provided with a bund and separate tank where required.
The Midi canopies makes use of a compact tank moulded in tough polypropylene, with visual level indication, mounted within the baseframe.
Other key features include:- Gull-wing or side opening doors for good service access- Panel/breaker access door with viewing window- Heavy duty locks on all doors for total security- Weather cap on exhaust discharge- Emergency Stop button relocated to canopy exterior- Lifting and holding down points- Fork Lift pockets (up to Canopy 4A)- Single roof lifting point (available on certain models only)
The canopy range has been extended to include the next size range of standard generating sets (up to 508kW) — known as C5, C6 and C7. Here the design principles are similar, but the canopy is of fully welded construction and relies on rock wool and a perforated zintec steel lining to achieve acoustic performance. A two-pack polyurethane paint system makes for a tough and durable finish.
Again, there is an integral steel fuel tank with the option of a bund and separate tank.
Baseframe lifting/lashing points are provided but, in lieu of fork lift pockets, canopies C5 and C6 have a single roof lifting point as standard.
For standard product in the larger size ranges (4.80 — 1200kW) a range of standard acoustic container packages have been designed.
The packages are based on standard ISO 20 ft and 40 ft ‘high cube’ shipping containers and are thus ideal for transport by sea or land.
The container is of fully welded construction and relies on rock wool and a perforated zintec steel lining to achieve acoustic performance with specially designed internally mounted silencers to control exhaust noise. A two-pack polyurethane paint system provides a durable finish and all doors are fitted with high security locks.
Some models (dependent on engine type) can be supplied with integral fuel tank.
Variants and options include :
- Interior lighting and small power- Motorised air inlet dampers- External fuel connections- External auxiliary power connections- Lub oil make-up tank
Standard Equipment Available as an option
* Indicitive weight additional to open setTypical Sound Pressure Level is a mean level, measured in free �eld conditions, with no contributory background noise
Canopy 4/4A
Midi 2 Canopy
Midi 1 Canopy
Canopy 3
20 ft ISO
40 ft ISO
Canopy 2
Canopy 1
Canopy 5Canopy 6/7
Acoustic Packages
Typical Sound Pressure Levelat Standby Power
dB(A) at 3ft dB(A) at 23ft
M 1 Midi 1 Canopy
M 2 Midi 2 Canopy
C 1 Canopy 1
C 2 Canopy 2
C 3 Canopy 3
C 4 Canopy 4
C 4 A Canopy 4A
C 5 Canopy 5
C 6 Canopy 6
C 7 Canopy 7
ISO 20 20ft ISO Container
ISO 40 40ft ISO HC Container
Fuel TankCapacity (US gal)
Integral Bunded
Enclosure Type Dimensions (in.)L × W × H
SinglePointLift
71.3 × 37.4 × 46.9 276 74 64 15 -
83.1 × 35.1 × 48.8 430 75 65 25 -
89.4 × 35.0 × 62.25 518 79 69 30 26
110.3 × 43.8 × 70.5 992 80 70 63 53
139.8 × 45.7 × 70.9 1598 82 72 122 106
155.2 × 51.2 × 76.4 1697 82 72 151 132
189.0 × 58.3 × 84.3 2353 82 72 195 72
210.7 × 63.0 × 93.3 5290 79 69 238 211
230.3 × 63.0 × 101.6 6502 82 72 264 238
259.8 × 74.8 × 104.4 7758 82 72 317 284
238.6 × 96.1 × 109.1 - 85 75 - -
480.4 × 96.1 × 121.1 85 75 - --
AdditionalWeight(lbs)*
STANDARD SPECIFICATIONS — ACOUSTIC ENCLOSURES
18 19
For the range of standard generating sets for the export market and small UK projects up to 200kW, Broadcrown have developed a standard range of acoustic canopies — designed to operate in harsh outdoor environmments whilst providing excellent security and acoustic performance.
All steel canopy components are pre-treated and polyester powder coated (to a typical thickness of 70-80μm) in RAL9001 white and all baseframes are finished in RAL9005 black. This, along with the use of zinc plated fasteners and neoprene seals, provides for a very durable yet attractive finish.
Acoustically, the canopies are designed to meet the requirements of EU Legislation 2000/14/EC. This level of performance is met by the extensive use of fire-retardant polyurethane foam together with efficient management of cooling air. Exhaust noise is minimised by internally mounted high performance exhaust silencers.
A steel fuel tank, complete with filler, gauge and accessory points, is integrated within the baseframe on all canopies except Midi. Alternatively, these can be provided with a bund and separate tank where required.
The Midi canopies makes use of a compact tank moulded in tough polypropylene, with visual level indication, mounted within the baseframe.
Other key features include:- Gull-wing or side opening doors for good service access- Panel/breaker access door with viewing window- Heavy duty locks on all doors for total security- Weather cap on exhaust discharge- Emergency Stop button relocated to canopy exterior- Lifting and holding down points- Fork Lift pockets (up to Canopy 4A)- Single roof lifting point (available on certain models only)
The canopy range has been extended to include the next size range of standard generating sets (up to 508kW) — known as C5, C6 and C7. Here the design principles are similar, but the canopy is of fully welded construction and relies on rock wool and a perforated zintec steel lining to achieve acoustic performance. A two-pack polyurethane paint system makes for a tough and durable finish.
Again, there is an integral steel fuel tank with the option of a bund and separate tank.
Baseframe lifting/lashing points are provided but, in lieu of fork lift pockets, canopies C5 and C6 have a single roof lifting point as standard.
For standard product in the larger size ranges (4.80 — 1200kW) a range of standard acoustic container packages have been designed.
The packages are based on standard ISO 20 ft and 40 ft ‘high cube’ shipping containers and are thus ideal for transport by sea or land.
The container is of fully welded construction and relies on rock wool and a perforated zintec steel lining to achieve acoustic performance with specially designed internally mounted silencers to control exhaust noise. A two-pack polyurethane paint system provides a durable finish and all doors are fitted with high security locks.
Some models (dependent on engine type) can be supplied with integral fuel tank.
Variants and options include :
- Interior lighting and small power- Motorised air inlet dampers- External fuel connections- External auxiliary power connections- Lub oil make-up tank
Standard Equipment Available as an option
* Indicitive weight additional to open setTypical Sound Pressure Level is a mean level, measured in free �eld conditions, with no contributory background noise
Canopy 4/4A
Midi 2 Canopy
Midi 1 Canopy
Canopy 3
20 ft ISO
40 ft ISO
Canopy 2
Canopy 1
Canopy 5Canopy 6/7
Acoustic Packages
Typical Sound Pressure Levelat Standby Power
dB(A) at 3ft dB(A) at 23ft
M 1 Midi 1 Canopy
M 2 Midi 2 Canopy
C 1 Canopy 1
C 2 Canopy 2
C 3 Canopy 3
C 4 Canopy 4
C 4 A Canopy 4A
C 5 Canopy 5
C 6 Canopy 6
C 7 Canopy 7
ISO 20 20ft ISO Container
ISO 40 40ft ISO HC Container
Fuel TankCapacity (US gal)
Integral Bunded
Enclosure Type Dimensions (in.)L × W × H
SinglePointLift
71.3 × 37.4 × 46.9 276 74 64 15 -
83.1 × 35.1 × 48.8 430 75 65 25 -
89.4 × 35.0 × 62.25 518 79 69 30 26
110.3 × 43.8 × 70.5 992 80 70 63 53
139.8 × 45.7 × 70.9 1598 82 72 122 106
155.2 × 51.2 × 76.4 1697 82 72 151 132
189.0 × 58.3 × 84.3 2353 82 72 195 72
210.7 × 63.0 × 93.3 5290 79 69 238 211
230.3 × 63.0 × 101.6 6502 82 72 264 238
259.8 × 74.8 × 104.4 7758 82 72 317 284
238.6 × 96.1 × 109.1 - 85 75 - -
480.4 × 96.1 × 121.1 85 75 - --
AdditionalWeight(lbs)*
STANDARD SPECIFICATIONS — ACOUSTIC ENCLOSURES
20 21
Control Panels — Midi Range
All Midi Range generating sets are provided with a set mounted control panel providing a high degree of reliability and a user- friendly operating system.
The entry level is a manual key start system (BC 701), however recognising the need for a high level of �exibility, the generating sets can be provided with alternative control panels o�ering auto start capability and power measurement facilities.
All control panels are built to the highest standards and include instrumentation for display of engine and alternator parameters and a protection monitoring system for all critical engine and alternator alarms and shutdowns.
Please refer to detailed speci�cation for standard features and optional equipment.
BC 701E-M
BC 704E-M
BC 5110-M
Midi RangeRANGE
BC 5310-M
BC 704-M
John Deere
MitsubishiYanmar
● Standard Equipment ❍ Available as an option
Control Panels
Features BC 701E-M BC 701-M BC 704E-M BC 704-M BC 5110E-M BC 5110-M BC 5310-M BC 5320-M
701 Key Start
704 Auto Start
5110 Digital Auto Start
5310 Digital Auto Start PM5320 Digital AMF PM
Coolant Temperature — Analogue
Lub Oil Pressure — Analogue
Engine Hours Counter — Analogue
Battery Charge Amps — Analogue
Coolant Temperature — Digital
Lub Oil Pressure — Digital
Engine Hours Counter — Digital
Battery Charge Amps — Digital
Battery Volts — Digital
Low Oil Pressure Shutdown
Low Oil Pressure Pre-alarm
High Water Temperature Shutdown
High Water Temperature Pre-alarm
Low Fuel Level Shutdown
Underspeed
Overspeed
Cool Down Timer
Fail To Start Indication
Charge Alternator Fail Warning
Low/ High Battery Volts (Alarm)
Voltmeter — Analogue
7-position Voltmeter Selector Switch
4-position Voltmeter Selector Switch
Ammeter — Analogue
4 Position Ammeter Selector Switch
Frequency Meter — Analogue
Voltmeter — Digital
Ammeter — Digital
Frequency Meter — Digital
kW, kVA, pf — Digital
Under Volts (Pre-alarm & Shutdown)
Over Volts (Pre-alarm & Shutdown)
Over Current (Shutdown)
Emergency Stop
Telemetry Facility
Intergrated Mains Monitoring
Charge Alternator Fail (Volt Free Contact)
Telemetry Active (Volt Free Contact) ➀
Common Alarm (Volt Free Contact) ➀
Generator Running (Volt Free Contact) ➀
System In Auto (Volt Free Contact) ➀
Battery Charger
Battery Charger Fail (Volt Free Contact)
Engine Heater & Control Switch
Preheat — Air Intake Heater / Glow Plug
Number Of Auxiliary Inputs/ OutputsP810 Interface (Includes software & Cable With USB Connection)
1 / - 1 / -
1 / 1
1 / 1 4 / 2 4 / 2 5 / 1 5 / 1
Deep
Sea
Cont
rol M
odul
eEn
gine
Inst
rum
ents
Engi
ne P
rote
ctio
nGe
nera
tor I
nstr
umen
tsGe
nera
tor
Pro
tect
ion
Othe
r Key
Feat
ures
STANDARD SPECIFICATIONS — MIDI RANGE ONLY
➀ Total number of volt free contacts not to exceed 3
NB: If the number of protection options exceeds the number of available inputs, discreet fault indications cannot be provided.
● Standard Equipment ❍ Available as an option
20 21
Control Panels — Midi Range
All Midi Range generating sets are provided with a set mounted control panel providing a high degree of reliability and a user- friendly operating system.
The entry level is a manual key start system (BC 701), however recognising the need for a high level of �exibility, the generating sets can be provided with alternative control panels o�ering auto start capability and power measurement facilities.
All control panels are built to the highest standards and include instrumentation for display of engine and alternator parameters and a protection monitoring system for all critical engine and alternator alarms and shutdowns.
Please refer to detailed speci�cation for standard features and optional equipment.
BC 701E-M
BC 704E-M
BC 5110-M
Midi RangeRANGE
BC 5310-M
BC 704-M
John Deere
MitsubishiYanmar
● Standard Equipment ❍ Available as an option
Control Panels
Features BC 701E-M BC 701-M BC 704E-M BC 704-M BC 5110E-M BC 5110-M BC 5310-M BC 5320-M
701 Key Start
704 Auto Start
5110 Digital Auto Start
5310 Digital Auto Start PM5320 Digital AMF PM
Coolant Temperature — Analogue
Lub Oil Pressure — Analogue
Engine Hours Counter — Analogue
Battery Charge Amps — Analogue
Coolant Temperature — Digital
Lub Oil Pressure — Digital
Engine Hours Counter — Digital
Battery Charge Amps — Digital
Battery Volts — Digital
Low Oil Pressure Shutdown
Low Oil Pressure Pre-alarm
High Water Temperature Shutdown
High Water Temperature Pre-alarm
Low Fuel Level Shutdown
Underspeed
Overspeed
Cool Down Timer
Fail To Start Indication
Charge Alternator Fail Warning
Low/ High Battery Volts (Alarm)
Voltmeter — Analogue
7-position Voltmeter Selector Switch
4-position Voltmeter Selector Switch
Ammeter — Analogue
4 Position Ammeter Selector Switch
Frequency Meter — Analogue
Voltmeter — Digital
Ammeter — Digital
Frequency Meter — Digital
kW, kVA, pf — Digital
Under Volts (Pre-alarm & Shutdown)
Over Volts (Pre-alarm & Shutdown)
Over Current (Shutdown)
Emergency Stop
Telemetry Facility
Intergrated Mains Monitoring
Charge Alternator Fail (Volt Free Contact)
Telemetry Active (Volt Free Contact) ➀
Common Alarm (Volt Free Contact) ➀
Generator Running (Volt Free Contact) ➀
System In Auto (Volt Free Contact) ➀
Battery Charger
Battery Charger Fail (Volt Free Contact)
Engine Heater & Control Switch
Preheat — Air Intake Heater / Glow Plug
Number Of Auxiliary Inputs/ OutputsP810 Interface (Includes software & Cable With USB Connection)
1 / - 1 / -
1 / 1
1 / 1 4 / 2 4 / 2 5 / 1 5 / 1
Deep
Sea
Cont
rol M
odul
eEn
gine
Inst
rum
ents
Engi
ne P
rote
ctio
nGe
nera
tor I
nstr
umen
tsGe
nera
tor
Pro
tect
ion
Othe
r Key
Feat
ures
STANDARD SPECIFICATIONS — MIDI RANGE ONLY
➀ Total number of volt free contacts not to exceed 3
NB: If the number of protection options exceeds the number of available inputs, discreet fault indications cannot be provided.
● Standard Equipment ❍ Available as an option
22 23
RANGEJohn Deere
BCJD 75-60 T2 to 450-60 T3BCJD 310-60 and BCJD 416-60BCJD 70-60SP T2 to BCJD 95-60 SP T3
BCJD 40-60 T2 to 62-60 T2BCJD 40-60SP to 100-60SP
Volvo
All BCV models
BC 701 BC 704
Cummins
All BCC models
Mitsubishi
All BCM models
BC 5110 BC 5310 BC 5320 BC 5510 BC 5520
For the range of standard generating sets for the export market and for small UK projects <400kW, Broadcrown has developed a standard range of control panels detailed below. For UK standard generating sets and UK major projects >400kW, please refer to the X Range control panels. All generating sets are provided with a set mounted control panel providing a high degree of reliability and a user-friendly operating system. The entry level is a manual key start system (BC 701), however recognising the need for a high level of �exibility, the generating sets can be provided with alternative control panels o�ering auto start capability, automatic mains failure (AMF) control and power measurement facilities. To enable Broadcrown to meet the di�erent and challenging requirements of our customer base in generating set application, the range of control panels is further enhanced by the provision of additional models designed to allow generator to generator synchronisation and load sharing (BC5510), and generator to mains/utility supply synchronisation for no break return or soft load transfer (BC 5520).
All control panels are built to the highest standards and include instrumentation for display of engine and alternator parameters and a protection monitoring system for all critical engine and alternator alarms and shutdowns. Please refer to detailed speci�cation for standard features and optional equipment.
Control Panels — All Models Except Midi
➀ — SAE J1939 CANBus Interface
➀
➀
➀
BC 701
BC 704
BC5110
BC 5310
BC 5320
BC 5510
BC 5520MTU
All BCMU models
● Standard Equipment ❍ Available as an option
Control Panels
● Standard equipment ❍ Available as an option ▼ Model dependent ➀ Auxilliary input required➁ Auxilliary output required➂ Standard on engines with J1939 CANBus interface only
701 Key Start704 Auto Start5110 Digital Auto Start5310 Digital Auto Start PM5320 Digital Auto Mains Failure PM5510 Digital — Set To Set Synchronisation5520 Digital — Single Set To Mains Synchronisation5560 Module — Multi Set To Mains Synchronisation
Coolant Temperature — AnalogueLub. Oil Pressure — AnalogueLub. Oil Temperature — AnalogueEngine Hours Counter — AnalogueBattery Charge Amps — AnalogueCoolant Temperature — DigitalLub. Oil Pressure — DigitalLub. Oil Temperature — Digital ➂
Engine Hours Counter — DigitalBattery Charge Amps — DigitalBattery Volts — Digital
Low Oil Pressure ShutdownLow Oil Pressure Pre-alarmHigh Oil Temp Alarm or Shutdown (Incl. Visual Indication) ➀ ➂
➀
➀
High Water Temperature ShutdownHigh Water Temperature Pre-alarmLow Coolant Level (Alarm or Shutdown)Low Fuel Level ShutdownFuel Leak DetectionUnderspeedOverspeedCool Down TimerFail To Start IndicationCharge Alternator Fail WarningLow/ High Battery Volts (Alarm)
Voltmeter — Analogue7-position Voltmeter Selector SwitchAmmeter — Analogue4 Position Ammeter Selector SwitchFrequency Meter — AnalogueVoltmeter — DigitalAmmeter — DigitalFrequency Meter — DigitalkW, kVA, pf — Digital
Under & Over Volts (Alarm or Shutdown)Over Volts (Shutdown)Over Current (Shutdown)Circuit Breaker Tripped (Shutdown)
Emergency StopSAE J1939 CANBus Interface ➂
➀
➀
➁
➁
➁
➁
➁
➁
➁
➁
Telemetry Facility (Includes Software & Cable With USB Connection)
BC 701Features
▼
BC 704
▼
BC 5110
▼
BC 5310
▼
▼▼
BC 5320
▼
▼▼
BC 5510
▼
▼▼
BC 5520
▼
▼▼
Telemetry Active
Integrated Mains Monitoring
Common Alarm
Generator Running
System In Auto
**** ****
*
Battery Charger & Control Switch
Battery Charger Fail
Engine Heater & Controls Anti-condensation Panel Heater Number Of Auxiliary Inputs/ Outputs 1 / - 2* / 2 5 / 3 6 / 3 6 / 3 9 / 5 9 / 5
1 / - 1 / 2 4 / 2 5 / 2** 5 / 2** 6 / 1*** 5 / 1***
Deep
Sea
Cont
rol M
odul
eEn
gine
Instr
umen
tsEn
gine
Prot
ectio
nGe
nera
tor I
nstru
men
tsGe
nera
tor
Prot
ectio
nOt
her K
ey Fe
atur
esVo
lt Fr
ee Co
ntac
t
STANDARD SPECIFICATIONS — ALL MODELS EXCEPT MIDI
Breaker Shunt Trip Via ControllerEarth Fault Protection RestrictedEarth Fault Protection Unrestricted
Engine Control Switch
Charge Alternator FailFire Detection OperatedLow Battery VoltsGenerator Contactor (Ready To Load)
Mains & Generator ‘Breaker’ ControlAvailable Auxiliary Inputs/ OutputsRelay Expansion Board (Max 8 Outputs)P810 Interface (Includes Software & Cable With USB Connection)
Mains & Generator ‘Contactor’ Control
* Generator running VFC and additional auxiliary outputs no longer available with this option. Select relay expansion board for additional auxiliary output requirements.** No auxiliary outputs available on BCV models. Select relay expansion board for additional auxiliary output requirements.*** 6 auxiliary outputs available on BCV models only. Select relay expansion board �tted as standard.**** Select relay expansion board standard on BCV models only.NB: If the number of auxiliary outputs required exceeds the number available select in addition the relay expansion board option.
22 23
RANGEJohn Deere
BCJD 75-60 T2 to 450-60 T3BCJD 310-60 and BCJD 416-60BCJD 70-60SP T2 to BCJD 95-60 SP T3
BCJD 40-60 T2 to 62-60 T2BCJD 40-60SP to 100-60SP
Volvo
All BCV models
BC 701 BC 704
Cummins
All BCC models
Mitsubishi
All BCM models
BC 5110 BC 5310 BC 5320 BC 5510 BC 5520
For the range of standard generating sets for the export market and for small UK projects <400kW, Broadcrown has developed a standard range of control panels detailed below. For UK standard generating sets and UK major projects >400kW, please refer to the X Range control panels. All generating sets are provided with a set mounted control panel providing a high degree of reliability and a user-friendly operating system. The entry level is a manual key start system (BC 701), however recognising the need for a high level of �exibility, the generating sets can be provided with alternative control panels o�ering auto start capability, automatic mains failure (AMF) control and power measurement facilities. To enable Broadcrown to meet the di�erent and challenging requirements of our customer base in generating set application, the range of control panels is further enhanced by the provision of additional models designed to allow generator to generator synchronisation and load sharing (BC5510), and generator to mains/utility supply synchronisation for no break return or soft load transfer (BC 5520).
All control panels are built to the highest standards and include instrumentation for display of engine and alternator parameters and a protection monitoring system for all critical engine and alternator alarms and shutdowns. Please refer to detailed speci�cation for standard features and optional equipment.
Control Panels — All Models Except Midi
➀ — SAE J1939 CANBus Interface
➀
➀
➀
BC 701
BC 704
BC5110
BC 5310
BC 5320
BC 5510
BC 5520MTU
All BCMU models
● Standard Equipment ❍ Available as an option
Control Panels
● Standard equipment ❍ Available as an option ▼ Model dependent ➀ Auxilliary input required➁ Auxilliary output required➂ Standard on engines with J1939 CANBus interface only
701 Key Start704 Auto Start5110 Digital Auto Start5310 Digital Auto Start PM5320 Digital Auto Mains Failure PM5510 Digital — Set To Set Synchronisation5520 Digital — Single Set To Mains Synchronisation5560 Module — Multi Set To Mains Synchronisation
Coolant Temperature — AnalogueLub. Oil Pressure — AnalogueLub. Oil Temperature — AnalogueEngine Hours Counter — AnalogueBattery Charge Amps — AnalogueCoolant Temperature — DigitalLub. Oil Pressure — DigitalLub. Oil Temperature — Digital ➂
Engine Hours Counter — DigitalBattery Charge Amps — DigitalBattery Volts — Digital
Low Oil Pressure ShutdownLow Oil Pressure Pre-alarmHigh Oil Temp Alarm or Shutdown (Incl. Visual Indication) ➀ ➂
➀
➀
High Water Temperature ShutdownHigh Water Temperature Pre-alarmLow Coolant Level (Alarm or Shutdown)Low Fuel Level ShutdownFuel Leak DetectionUnderspeedOverspeedCool Down TimerFail To Start IndicationCharge Alternator Fail WarningLow/ High Battery Volts (Alarm)
Voltmeter — Analogue7-position Voltmeter Selector SwitchAmmeter — Analogue4 Position Ammeter Selector SwitchFrequency Meter — AnalogueVoltmeter — DigitalAmmeter — DigitalFrequency Meter — DigitalkW, kVA, pf — Digital
Under & Over Volts (Alarm or Shutdown)Over Volts (Shutdown)Over Current (Shutdown)Circuit Breaker Tripped (Shutdown)
Emergency StopSAE J1939 CANBus Interface ➂
➀
➀
➁
➁
➁
➁
➁
➁
➁
➁
Telemetry Facility (Includes Software & Cable With USB Connection)
BC 701Features
▼
BC 704
▼
BC 5110
▼
BC 5310
▼
▼▼
BC 5320
▼
▼▼
BC 5510
▼
▼▼
BC 5520
▼
▼▼
Telemetry Active
Integrated Mains Monitoring
Common Alarm
Generator Running
System In Auto
**** ****
*
Battery Charger & Control Switch
Battery Charger Fail
Engine Heater & Controls Anti-condensation Panel Heater Number Of Auxiliary Inputs/ Outputs 1 / - 2* / 2 5 / 3 6 / 3 6 / 3 9 / 5 9 / 5
1 / - 1 / 2 4 / 2 5 / 2** 5 / 2** 6 / 1*** 5 / 1***
Deep
Sea
Cont
rol M
odul
eEn
gine
Instr
umen
tsEn
gine
Prot
ectio
nGe
nera
tor I
nstru
men
tsGe
nera
tor
Prot
ectio
nOt
her K
ey Fe
atur
esVo
lt Fr
ee Co
ntac
t
STANDARD SPECIFICATIONS — ALL MODELS EXCEPT MIDI
Breaker Shunt Trip Via ControllerEarth Fault Protection RestrictedEarth Fault Protection Unrestricted
Engine Control Switch
Charge Alternator FailFire Detection OperatedLow Battery VoltsGenerator Contactor (Ready To Load)
Mains & Generator ‘Breaker’ ControlAvailable Auxiliary Inputs/ OutputsRelay Expansion Board (Max 8 Outputs)P810 Interface (Includes Software & Cable With USB Connection)
Mains & Generator ‘Contactor’ Control
* Generator running VFC and additional auxiliary outputs no longer available with this option. Select relay expansion board for additional auxiliary output requirements.** No auxiliary outputs available on BCV models. Select relay expansion board for additional auxiliary output requirements.*** 6 auxiliary outputs available on BCV models only. Select relay expansion board �tted as standard.**** Select relay expansion board standard on BCV models only.NB: If the number of auxiliary outputs required exceeds the number available select in addition the relay expansion board option.
Broadcrown Limited
Airfield Industrial Estate, Hixon, Stafford,
Staffordshire, ST18 0PF, UK.
Tel: +44 (0) 1889 272200
Fax: +44 (0) 1889 272220
Email: info@broadcrown.co.uk
60Hz
In line with the Broadcrown Holdings PLC policy of continual development and improvement the information given here is only intended for the assistance of clients and is not binding upon the company which reserves the rights to alter speci�cations of its products without notice. ©Broadcrown Group of Companies 2009/60/03
Broadcrown Inc. 10050 NW 116th Way, Suite 4, Medley, Florida 33178, USA. Tel: +1 305 888 1414 Fax: +1 305 888 1801 Email: info@broadcrown.com
Broadcrown (Singapore) Limited 3791 Jalan Bukit Merah,#05-08, E-Centre @ Redhill,Singapore 159471.Tel: +65 6235 3630Fax: +65 6732 4355Email: brdcrown@singnet.com.sg
Broadcrown (West Africa) LimitedPlot 4/6 Kudirat Abiola Way,Alausa, Ikeja, Nigeria.Tel: +234 (0) 1 761 7107 +234 (0) 1 761 7595 +234 (0) 1 482 2577Email: mail@broadcrownwestafrica.com sales@broadcrownwestafrica.com
Broadcrown South Africa (PTY) LTDGolden Isle, Durban RdBellville, Cape TownSouth Africa.Tel: +27 (0)21 9196501Fax: +27 (0)21 9196699Email: info@broadcrown.co.za
Diesel Generating Sets
August 2009
Broadcrown Power India (PVT) Ltd.R - 06 A, 3rd Floor,MGF Plaza,Mehrauli - Gurgaon Road,Gurgaon - 122002,Haryana, India.Tel: +91 124 4260627/4260628Mobile: +91 9871110765Fax: +91 124 4260626Email: sales@broadcrownindia.com
Broadcrown (China) LTDRM 1503, Tower B, Soho Newtown88 Jianguo AvenueChaoyang Dist., BeijingChina 100022Tel: 86 10 8589 3698Fax: 86 10 8589 5771Email: sales@broadcrown.com.cn
top related