Transcript
BMW Motoren GmbH, Hinterbergerstrasse 2, A-4400 Steyr
Guidlines for the introduction of
Delivery note EDI - VDA 4913 Material tags - VDA 4902
BMW Plant Steyr
Updated 2013, March 14th
BMW Werk Steyr
Firma
BMW Motoren GmbH
Ein Unternehmen der BMW Group
Postanschrift
BMW Motoren GmbH
Postfach 44 Hinterbergerstraße 2
A-4400 Steyr
Telefon
+43(0) 72 52 / 8 88-0
Fax
+43(0) 72 52 / 8 88-700
Internet
www.bmw.at
Bankkonto
Raiffeisen-Zentralbank Wien
Am Stadtpark 9 212.795
BLZ 31000
Firmenbuchgericht
Landesgericht Steyr
Firmenbuchnummer
FN 153093 m DVR: 0990931
Table of contents: 1. Delivery note - EDI: ......................................................................................................... 3
1. Principles and goals: ..................................................................................................... 3 2. Communicational standards and specifications: ........................................................... 4
Set-up of a file name: .................................................................................................... 4 4. Application of single record types: ................................................................................ 4 5. Point of time for data transfer: ....................................................................................... 4
6. Data transfer to the forwarder: ...................................................................................... 5 8. Implementations-/Testphase: ........................................................................................ 5 9. Running operation: ........................................................................................................ 6 10.Contact persons at BMW ............................................................................................. 7 9. Coverage list of contact persons: .................................................................................. 7
10. Description of record types according to VDA 4913: ................................................... 8 2. Container labeling according to VDA 4902: ............................................................... 14
2.1 VDA-voucher sample: ............................................................................................... 15 2.2 Information sheet concerning the attachment of material tags: ................................. 16
1. Appendix: ................................................................................................................... 19
ASN and Material tag 18.03.13 ZM-122 Traxler 3/21
1. Delivery note - EDI:
1. Principles and goals:
BMW Motors Steyr uses EDI since a few years to transfer all delivery note data. Basically the EDI-Implementation-Guidelines from BMW AG (https://b2b.bmwgroup.net) also applies on BMW Steyr. The deviations are documented in this writing. The goals of delivery note EDI are:
- Reduction of the delivery notes (one EDI receipt document VDA 4912) - Simplification and quickening of the receiving process - Avoidance of registration errors - Precocious stock information for material control - Definite provision of data for credit note processing (VDA 4908)
Due to the feedback from our suppliers, BMW Motors Steyr expects 100% coverage through this communicational media. This process can only succeed if the data fulfils this high quality standard.
- The data must be available prior to the delivery of the material - Early information for receiving, material control, accountancy,...
Bad data quality would cause false information for all concerned departments, manual corrections and queries would be necessary and the benefits of this transfer would be reduced. For further information please contact:
Mrs. Brigitte Brandhofer Mr. Friedrich Traxler Tel: 0043/7252-888-2353 Tel: 0043/7252-888-2521 E-Mail: brigitte.brandhofer@bmw.com E-Mail: friedrich.traxler@bmw.com
ASN and Material tag 18.03.13 ZM-122 Traxler 4/21
2. Communicational standards and specifications:
BMW Motoren only uses EDI (delivery notes and transport data) for serial parts. The Applikation by delivery from spare parts, test parts, tools, consumables,... is planned in a later period. Per transport the delivery can be combined to one transfer. Two norms are available for data transfer:
- VDA 4913 Version 3 or 4 - EDIFACT DESADV (planned subsequent)
This manual enfolds the requirements according to VDA 4913to VDA 4913. The Transfer must take place with the character set EBCDIC. Alphabetical symbols must be written large. Set-up of a file name: W5.VDA4913.INB.ASN Before activating the EDI for productivity, a test phase will be started; the date must be coordinated with the contact person by BMW Motoren. For test ASN‟s please send the virtual filename W5T.VDA4913.INB.ASN
4. Application of single record types: In the BMW-receiving system basically all record types are used (except 716 and 717) structuring the record type sequence occurs according to the VDA-recommendation 4913. The record type 715 is stringently necessary by BMW Motoren for as packaging material is positional based. The field 03 “Packaging type code customer” must be filled in with the packaging type code of the external packaging. These packaging type codes will be posted from BMW-Steyr (packing-planning dept.) using a packing data sheet. If needed the department packaging planning will create a list of the container accounts of the supplier, from which the packaging numbers can be read. The record types 716 and 717 are not used by BMW Motoren and will not be processed.
5. Point of time for data transfer: The Data transfer can take place from 0am – 24pm. The transfer must occur immediately after dispatching the shipment. Our disposition- and material planning departments use these data already for their analysis. All changes of the actual data must be considered before the data transfer. The accompanying documents must be conform to the data transfer.
ASN and Material tag 18.03.13 ZM-122 Traxler 5/21
6. Data transfer to the forwarder:
BMW Steyr receives a remote data transmission (RDT) of the transport from the particular area forwarder. Basis for this is the consignment-nr. and the lading reference number (SLB), record type 712, field 03. Since this number identifies the whole load, the system may only generate one SLB-number per load. To ensure a smooth dispatch process, these numbers should be transferred together with the supplier code, container amount and total weight to the hauler automatically latest after the lorry leaves the site. Following possibilities of RDT are available to the haulers:
Copy of VDA 4913
VDA Norm 4921 EDIFACT
7. Extra Tour for urgent parts: When you send the parts without our forwarder, please write in the record type 712, field 05 the information: SONDERFAHRT
8. Implementations-/Testphase:
In the test Phase all delivery note data will be checked on its form and contents and agreed on with the contact person of the supplier. The test data should be based on actual dispatch data to hold problems as low as possible when first going productive. The start will be synchronised with the departments, after reaching a certain level of stability and faultless conditions. Simultaneously the EDI basic contract will be endorsed. To keep the effort of both sides low, and simultaneously assure high data quality, which is in mutual interest, following points are to observe:
- Data processing must be VDA or EDIFACT conform - BMW specific usage of VDA 4913 / EDIFACT DESADV correlative to the
description of the record types - Maintenance of the customer specific data and verification of the RDT – data
against the master data (order data; packing data) - Adoption of relevant LAB-data into the order/dispatch transaction
Presently BMW fills, according to the VDA-recommendation 4905 for version 01, the fields 512/11 unloading point and 512/19 store with material flow data. These information’s must be printed onto the VDA-voucher 4902 in the fields 02.1 unloading point and 02.2 storage place.
ASN and Material tag 18.03.13 ZM-122 Traxler 6/21
9. Running operation:
The data quality level and the in time transfer of data achieved during the test phase must also be achieved during the running operation. If already sent data needs to be corrected, a new data set with the correct data needs to be created and sent immediately. The receiving department needs to be informed as soon as possible. To ensure the data consistency of the EDI and vouchers, a time synchronic creation of following vouchers is necessary:
- EDI goods receipt slip VDA Norm 4912 For emergency strategy, and to input the freight data according to VDA Norm 4921 through the shipping company.
- Material tags VDA Norm 4902 Version 4
In case an EDI is not possible in time, please inform our receiving department immediately declaring the transaction number. In case the receiving department recognizes a faulty delivery note transaction, it will inform the contact person of the effected supplier, to support the faulty clearance with the supplier. For a fast recovery this communication should occur per telephone. For a smooth process it is necessary that the responsible contact persons change the following parameter in time, and inform our responsible departments:
- Supplier number - Address data - New dispatch location - Contact person - RDT-connections - Transfer matrix methods - Stand by times of EDI - Version changes of VDA Norm 4913
ASN and Material tag 18.03.13 ZM-122 Traxler 7/21
10.Contact persons at BMW
Domain Contact person Telephone Email IV hotline EDI Operations +49 89 382 -55555 Asz.hotline@bmw.de
configuration and efficiency tests EDI Operations +49 89 382 -55555 Asz.hotline@bmw.de
Goods delivery datas Mr. Nussbaummüller +43 7252 888-2549 wareneingang@bmw.co.at
EDI Coordinator Steyr Mr. Traxler +43 7252 888-2521 Friedrich.traxler@bmw.com
Transport data Mr. Zoitl +43 7252 888-2576 fracht@bmw.co.at
packaging Mr. Spring +43 7252 888-2960 verpackungsplanung@bmw.co.at
Delivery shedule Responsible person for
purchasing according to
delivery shedules
+43 7252 888-xxxx disposition@bmw.co.at
Credit note processing Mrs. Vogt +49-89-382-24833 Brigitte.vogt@bmw.de
9. Coverage list of contact persons:
See appendix
ASN and Material tag 18.03.13 ZM-122 Traxler 8/21
10. Description of record types according to VDA 4913:
Rekord type 711: Pos Fieldname
VDA K M
LG. Byte
A N
Digit Description to VDA BMW-Steyr requirements
01 Record type M 3 N 1-3
02 Version- Number
M 2 N 4-5 Identifies how up-to-date a record type is
03 Data recipient number
M 9 A 6-14 Identification number, which the data recipient agrees with the data recipient.
04 Data sender number
M 9 A 15-23 Identification number, which the data recipient agrees with the data sender.
05 Transmission Number Old
M 5 N 24-28
06 Transmission Number New
M 5 N 29-33
07 Transmission Date
M 6 N 34-39 YYMMDD
08 Sub- Contractor Number
K 9 A 40-48
09 Carrier Number K 9 A 49-57
10 Warehouse man number
K 1 A 58
11 Delivery identifer M 70 A 59 JIT identifier „J‟ only for JIT process
K = Can M = Must R = Required A = Alphanumeric N = Numeric
ASN and Material tag 18.03.13 ZM-122 Traxler 9/21
Record type 712: Pos Fieldname
VDA K M
LG. Byte
A N
Digit Description to VDA BMW-Steyr requirements
01 Record type M 3 1-3
02 Version- Number
M 2 4-5
03 Conveyance number
M 8 6-13 Reference number of the consignment/cargo assigned by the sender. Should not be repeated during the period of one year
This number is not a copy from the delivery note number (field 713/03), it‟s a own number
04 plant supplier
K 3 14-16 Identification of the dispatching plant
05 carrier M 14 17-30 Name or Number
06 carrier submission date
M 6 31-36 YYMMDD
07 carrier submission time
M 4 37-40 HHMM
08 Consignment weight gross
M 7 41-47 Weight of goods, incl packaging and/or loading aids in kilo (numeric with leading zeros)
09 Consignment weight net
K 7 48-54
Weight of goods, incl packaging and/or loading aids in kilo (numeric with leading zeros
10 Freight prepaiment code
K 2 55-56
11 Haulage contractor EDI code
K 1 57
12 Number of handling units
R 4 58-61 Total of packages contained in the consignment
BMW must *
13 transport partner number
K 14 62-75 Name or number of haulage contractor
14 Means of transport code
M 2 76-77
15 Means of transport number
M 25 78-102 Identification of the means of transport
16 Tariff zone / community tariff
K 9 103-111
17 Target arrival date
K 6 112-117
18 Target arrival time
K 4 118-121
19 Loading capacity
K 3 122-124
20 Truck-type code K 1 125
21 blank M 3 126-128
Additional Information:
Field 03, conveyance nr. and the consignment reference number (SLB): This number identifies the whole delivery, and may only be generated once per delivery! (No copy of a delivery note number) Further this number is the basis for the Transport-RDT and must be transferred to the hauler at latest when the lorry is leaving the site!
ASN and Material tag 18.03.13 ZM-122 Traxler 10/21
Record type713: Pos Fieldname
VDA K M
LG. Byte
A N
Digit Description to VDA BMW-Steyr requirements
01 Record type M 3 1-3
02 Version- Number
M 2 4-5
03 delivery note- Number
M 8 6-13 assigned by the supplier look at the bottom
04 Dispatch date M 6 14-19 JJMMTT look at the bottom
05 Unloading point M 5 20-24 Unloading point customer (keyed)
From delivery call off 512/11
06 Dispatch method M 2 25-26
07 Customer code (LAB)
K 4 27-30
08 Contractual purchase order number
R 12 31-42 Identificationnumber of general contract/purchase order assigned by customer
BMW must
09 Transaction code K 2 43-44
10 Blank 1 M 4 45-48
11 Customer plant M 3 49-51 Designation in encoded format of the customer
12 Consignment K 8 52-59
13 Goods recipient number
K 9 60-68
14 blank 2 M 1 69
15 Warehouse location customer
K 7 70-76 From delivery call off 512/19
16 Supplier number M 9 77-85 Identification number which the customer assigns to the supplier
17 Consumption point
K 14 86-99
18 Call-off number K 4 100-103
19 Customer code K 6 104-109
20 Document number M 19 110-124 JIT Call off number Only for JIT process
K = Can M = Must R = Required A = Alphanumerical N = Numerical
Additional Information: Field 03, delivery note number:
BMW Steyr uses single positional orders in the serial process, therefore we expect single positional delivery notes in receiving. Multiple part numbers cannot be processed by our system!
Field 04, Dispatch date:
The field dispatch date must match the actual dispatch date, since BMW calculates the transport time route!
ASN and Material tag 18.03.13 ZM-122 Traxler 11/21
Record type 714: Pos Fieldname
VDA K M
LG. Byte
A N
Digit Description to VDA BMW-Steyr requirements
01 Satzart M 3 1-3
02 Version Number
M 2 4-5
03 Ref. Number customer
M 22 6-27 Identification number which the customer assigns to an article
Material number with the index (9 digits)
04 Ref. Number supplier
M 22 28-49 Identification number which the supplier assigns to an article
05 Country of origin M 3 50-52
06 Delivery quantity 1 M 13 53-65
07 Units of quantity 1 M 2 66-67
08 Delivery quantity 2 K 13 68-80
09 Units of quantity 2 K 2 81-82
10 VAR rate K 3 83-85
11 blank 1 M 1 86
12 Item number delivery note
M 3 87-89 Item of a delivery note
13 Call off code K 1 90
14 Batch number K 15 91-105 Identification number which the manunfacturer assigns to a batch
15 Use code M 1 106
16 Hazardous substance code
K 8 107-114
17 Preference status M 1 115
18 Dutiable goods M 1 116
19 blank 2 M 1 117
20 Inventory status M 1 118
21 Changed design code
M 2 119-120
22 Original delivery note number
K 8 121-128
K = Can M = Must A = Alphanumerical N = Numerical
ASN and Material tag 18.03.13 ZM-122 Traxler 12/21
Record type 715: Pos Fieldname
VDA K M
LG. Byte
A N
Digit Description to VDA BMW-Steyr requirements
01 Record type M 3 1-3
02 Versions- number
M 2 4-5
03 Packaging type code customer
M 22 6-27 Identification number which the customer assigns to the packaging type
e.g.: L6862 packing
data sheet, must: packaging type code of the external packaging.
04 Packaging code supplier
M 22 28-49 Identification number which the supplier assigns to the packaging type
05 Number of packaging types
M 13 50-62 Numbers of packaging per type
06 Item number delivery note
M 3 63-65
07 Filling quantity K 13 66-78 Actual quantity of ref. Number in packaging type
08 Handling unit number from
R 9 79-87 Enter left-justified BMW must
09 Handling number unit to
K 9 88-96
Enter left-justified
10 Packaging dimesion
K 12 97-108
11 Stacking faktor K 1 109
12 Warehouse call-off number
K 15 110-124
13 Label identification
R 1 125-125 „S‟ or „M‟ BMW must
14 Packaging identification
K 1 126-126
15 Ownership identification
K 1 127-127
16 Blank K 1 128-128
Please send the record types 715 according to the VDA-Norm. When using a loading unit, the master label “M” will be assigned to the palette underneath. Record type sequence: For the description of the loading unit the previous described record (M Label) is to be transferred as 1st record type. Only the position 8 (package unit number from) may be filled. The S-labels that are within the loading unit, must be transferred as 2. record type. In case the loading unit numbers of the S-labels are consistently ascending, also the fields 08 (loading unit from) and 09 (loading unit until) may be used. The 3. record type is the cover, although it is to be transferred without label identification. When delivering more loading units this data structure must be used. (also see VDA Norm 4913, version 4) Information to pos. 03 : If using backup packaging (cardboard boxes,…) only use L0001 !
ASN and Material tag 18.03.13 ZM-122 Traxler 13/21
Record type 719: Pos Fildname
VDA K M
LG. Byte
A N
Digit Description to VDA BMW-Steyr requirements
01 Record type M 3 1-3
02 Version- number
M 2 4-5
03 Counter record type 711
M 7 6-12 Number of transmitted records of record type 711
04 Counter record type 712
M 7 13-19 Number of transmitted records of record type 712
05 Counter record type 713
M 7 20-26 Number of transmitted records of record type 713
06 Counter record type 714
M 7 27-33 Number of transmitted records of record type 714
07 Counter record type 715
M 7 34-40 Number of transmitted records of record type 715
08 Counter record type 716
M 7 41-47 Number of transmitted records of record type 716
09 Counter record type 718
M 7 48-54 Number of transmitted records of record type 717
10 Zähler Satzart 719
M 7 55-61 Number of transmitted records of record type 719
11 Counter record type 717
M 7 62-68 Number of transmitted records of record type 717
12 blank M 60 69-128
K = Can M = Must A = Alphanumeric N = Numeric
ASN and Material tag 18.03.13 ZM-122 Traxler 14/21
2. Container labeling according to VDA 4902: General: By BMW the VDA-voucher is used for the internal material flow. It is very important not to change any agreements print or attachment of the VDA-voucher one-side. The for the bar code reading necessary fields character “J” must also be filled with a barcode of the type code 39. To identify the fields, an identifier needs to be prefixed so that a reading in open sequence is possible. Barcode recognition:
- Field 3 delivery note Identifier “N” - Field 8 article code Identifier “P” - Field 9.1 content amount Identifier “Q” - Field 12 supplier number Identifier “V” - Field 15 packing list item nr.r Identifier „S“ and “M”
In field 15 ‟packing item number‟ only the identifier „S“ and „M“ will be processed. Different article codes on a unit are not valid. Content of a standard material tag: Field Nr.
description Stellen height mm
must Field
Bar- code
BMW-Steyr demands
01 Goods recipient J N
02.1 02.2 02.3 02.4
Unloading point Storage location Location of consumption (not used) usage key
5 7
14
13 13
13
J J J
N N
N
Fields from EDI delivery call-off: 512/11 field Unloading point 512/19 field Storage location see site 5 cap. 6
03 Delivery note number 8 7 J J
04 Supplier address 29 5 J N
05 weight nett 5 5 N N
06 weight gross 5 5 N N
07 Number of packing items
4 5 J N
08 Article code BMW Withchange index
9 13 J J 9 digits incl. Index
09.1 09.2
Content amount Quantity unit
7 2
13 5
J N
J N
10 term 30 22
5 7
J N
11.1 11.2
Article code supplier Packing item nr. Customer
22 10
13 13
J J
N N
12 Supplier number 8 5 J J e.g. 10089210
13 date 7 7 J N yymmdd
14 Update status 14 7 N N
15 Packing item number 9 10 J J
16 charge number 12 13 N N
17 Supplier address 45 2,5 N N
18 Preprint description 45 2,5 N N
ASN and Material tag 18.03.13 ZM-122 Traxler 15/21
Code Specification:
code 39 Minimum module width (line width bar or gap) 0.5 mm min Pressure ratio narrow bar to wide bar 1:2,5 Pressure ratio narrow gap too wide gap 1:2,5 Quiet zone at the beginning and end of the label min.10mm Minimum bar height 13mm
2.1 VDA-voucher sample:
ASN and Material tag 18.03.13 ZM-122 Traxler 16/21
2.2 Information sheet concerning the attachment of material tags: General: The material tags according to VDA 4902 must be attached, that a stationary mounted scanner is able to read and process the printed barcode. The containers are being moved on a conveyor system during the scanning process. The quality of the material tag VDA 4902 is to choose, so that it can still be read from the automatic scanner after three months. The horizontally attached material tags may not be covered by any safety lashes and also not extend the outer contours of the container.
Basically only one material tag according to VDA 4902 is to be attached per container. Supplier internal attachments must be removed before delivery to BMW Steyr.
ASN and Material tag 18.03.13 ZM-122 Traxler 17/21
Attaching the material tags: The VDA voucher must be attached according to the VDA recommendation (4 adhesive spots). It is not permitted to glue the complete VDA voucher onto the container. Please be aware not to damage or remove the VDA voucher when loading the lorry (This writing also goes to all forwarders). The adhesive characteristics must allow the removal of the vouchers without mechanical help. Location of attachment:
The VDA voucher must be attached onto the designated area. Containers with the dimension 1200 x 800 mm (L4444, L0062, L3694, L3695, L0016, L2560, L3657)
must be labeled on the long side of the container.
Container with the dimension 1200 x 800 must be labeled on the long side
(1200 mm).
The VDA voucher may not be adhered onto the lid. All 4 adhesive spots must be pasted on the
KLT´s.
ASN and Material tag 18.03.13 ZM-122 Traxler 18/21
Containers with the dimensions 800 x 600 mm (L3708, L6043, L6143) must be labeled edgewise (600 mm).
Any additional effort on our side due to faulty, wrong labeled or wrong positioned labels on the containers through the supplier will be billed with €46,--. Please inform your relevant colleagues about these measures so the implementation can take place as soon as possible.
The container must be labeled edgewise with
the VDA voucher (600 mm).
ASN and Material tag 18.03.13 ZM-122 Traxler 19/21
1. Appendix:
Parameter Sheet for Connection to Commercial EDI with
BMW Group – BMW Steyr
FAX address: +49-89-382-70-55555
E-Mail: asz.hotline@bmw.de In order for your company to communicate via an EDI Connection with BMW Steyr certain information, in regard to defining your company as an EDI partner, needs to be collected. Connection of to the EDI system at BMW requires suppliers to undertake the following processes: 1. The ASZ writes a ticket
2. Completion and return of this EDI Parameter Sheet
3. Technical line testing between BMW EDI-Support and the supplier. The supplier
communicates with BMW EDI-Support to arrange a suitable testing schedule.
4. Test data is sent between BMW Steyr and the supplier. The supplier checks that the
message formats can be processed, and record structures can be converted.
5. Start of the productive data interchange. I hereby declare that the information below is correct: Place, Date Signature/Company Stamp
ASN and Material tag 18.03.13 ZM-122 Traxler 20/21
General address data: Company name: PO Box/Street: Postal Code Town/City: Country: Fax No.: Supplier number: Person to contact:
Function Name Telephone Email
EDI Co-ordination
Technical Line Test
Ongoing Transmissions
ASN and Material tag 18.03.13 ZM-122 Traxler 21/21
The connection is required for the following message types:
Nachrichtenart (bitte ankreuzen) Format Virtueller Dateiname
Lieferabrufe VDA4905 W5.VDA4905.OUT.SCHED
Lieferabrufe EDIFACT
DELFOR 97A W5.E97A.OUT.SCHED
JIT/JIS-Lieferabrufe
EDIFACT DELJIT 96A
W5.EDIFACT.OUT.DELJIT
Gutschriften VDA4908 W5.VDA4908.OUT.INVCE
Lieferscheine VDA4913 W5.VDA4913.INB.ASN
Lieferscheine
EDIFACT DESADV 97A
W5.EDIFACT.ASN.97A
Note: For Test-Files please send the virtual filename W5T.**** Transmission parameters:
Please complete the right side of the table with your EDI parameters. The sender of the data transmission starts
BMW EDI Server supplier
transmission (check)
ISDN Number +49-89-3573471
ENX (TCP/IP) 160.50.6.48
VAN Service Provider:
Mailbox Nr.:
Mailbox Name:
OFTP Parameters
SSID O0013000045BMW-AG
SFID O0013000045BMW-AG
Passwort (max. 8 char.) Wird bekannt gegeben
The BMW EDI Server is available for transmission 24hours/day. Any queries during the initial test phase with the ticket number to ASZ. Following completion then queries should be sent to your nominated BMW Steyr contact. In case of problems with ongoing transmissions please call IT-Hotline: +49-89/382-55555 Please say Supplier number and Service EDI-Operations.
top related